From 7cf5d06c8c96d3ae3d41d8a54bfc386f13b3c4a4 Mon Sep 17 00:00:00 2001 From: Silvio Rhatto Date: Fri, 27 Dec 2013 14:43:43 -0200 Subject: Cleaning up modules --- modules/vim/vim.dot.link/doc/NERD_tree.txt | 1222 --------------------- modules/vim/vim.dot.link/doc/bufexplorer.txt | 547 ---------- modules/vim/vim.dot.link/doc/git-vim.txt | 95 -- modules/vim/vim.dot.link/doc/indexer.txt | 211 ---- modules/vim/vim.dot.link/doc/project.txt | 710 ------------ modules/vim/vim.dot.link/doc/snipMate.txt | 286 ----- modules/vim/vim.dot.link/doc/taglist.txt | 1501 -------------------------- modules/vim/vim.dot.link/doc/tags | 304 ------ modules/vim/vim.dot.link/doc/vcscommand.txt | 835 -------------- 9 files changed, 5711 deletions(-) delete mode 100644 modules/vim/vim.dot.link/doc/NERD_tree.txt delete mode 100644 modules/vim/vim.dot.link/doc/bufexplorer.txt delete mode 100644 modules/vim/vim.dot.link/doc/git-vim.txt delete mode 100644 modules/vim/vim.dot.link/doc/indexer.txt delete mode 100644 modules/vim/vim.dot.link/doc/project.txt delete mode 100644 modules/vim/vim.dot.link/doc/snipMate.txt delete mode 100755 modules/vim/vim.dot.link/doc/taglist.txt delete mode 100644 modules/vim/vim.dot.link/doc/tags delete mode 100644 modules/vim/vim.dot.link/doc/vcscommand.txt (limited to 'modules/vim/vim.dot.link/doc') diff --git a/modules/vim/vim.dot.link/doc/NERD_tree.txt b/modules/vim/vim.dot.link/doc/NERD_tree.txt deleted file mode 100644 index 2e2278c..0000000 --- a/modules/vim/vim.dot.link/doc/NERD_tree.txt +++ /dev/null @@ -1,1222 +0,0 @@ -*NERD_tree.txt* A tree explorer plugin that owns your momma! - - - - omg its ... ~ - - ________ ________ _ ____________ ____ __________ ____________~ - /_ __/ / / / ____/ / | / / ____/ __ \/ __ \ /_ __/ __ \/ ____/ ____/~ - / / / /_/ / __/ / |/ / __/ / /_/ / / / / / / / /_/ / __/ / __/ ~ - / / / __ / /___ / /| / /___/ _, _/ /_/ / / / / _, _/ /___/ /___ ~ - /_/ /_/ /_/_____/ /_/ |_/_____/_/ |_/_____/ /_/ /_/ |_/_____/_____/ ~ - - - Reference Manual~ - - - - -============================================================================== -CONTENTS *NERDTree-contents* - - 1.Intro...................................|NERDTree| - 2.Functionality provided..................|NERDTreeFunctionality| - 2.1.Global commands...................|NERDTreeGlobalCommands| - 2.2.Bookmarks.........................|NERDTreeBookmarks| - 2.2.1.The bookmark table..........|NERDTreeBookmarkTable| - 2.2.2.Bookmark commands...........|NERDTreeBookmarkCommands| - 2.2.3.Invalid bookmarks...........|NERDTreeInvalidBookmarks| - 2.3.NERD tree mappings................|NERDTreeMappings| - 2.4.The NERD tree menu................|NERDTreeMenu| - 3.Options.................................|NERDTreeOptions| - 3.1.Option summary....................|NERDTreeOptionSummary| - 3.2.Option details....................|NERDTreeOptionDetails| - 4.The NERD tree API.......................|NERDTreeAPI| - 4.1.Key map API.......................|NERDTreeKeymapAPI| - 4.2.Menu API..........................|NERDTreeMenuAPI| - 5.About...................................|NERDTreeAbout| - 6.Changelog...............................|NERDTreeChangelog| - 7.Credits.................................|NERDTreeCredits| - 8.License.................................|NERDTreeLicense| - -============================================================================== -1. Intro *NERDTree* - -What is this "NERD tree"?? - -The NERD tree allows you to explore your filesystem and to open files and -directories. It presents the filesystem to you in the form of a tree which you -manipulate with the keyboard and/or mouse. It also allows you to perform -simple filesystem operations. - -The following features and functionality are provided by the NERD tree: - * Files and directories are displayed in a hierarchical tree structure - * Different highlighting is provided for the following types of nodes: - * files - * directories - * sym-links - * windows .lnk files - * read-only files - * executable files - * Many (customisable) mappings are provided to manipulate the tree: - * Mappings to open/close/explore directory nodes - * Mappings to open files in new/existing windows/tabs - * Mappings to change the current root of the tree - * Mappings to navigate around the tree - * ... - * Directories and files can be bookmarked. - * Most NERD tree navigation can also be done with the mouse - * Filtering of tree content (can be toggled at runtime) - * custom file filters to prevent e.g. vim backup files being displayed - * optional displaying of hidden files (. files) - * files can be "turned off" so that only directories are displayed - * The position and size of the NERD tree window can be customised - * The order in which the nodes in the tree are listed can be customised. - * A model of your filesystem is created/maintained as you explore it. This - has several advantages: - * All filesystem information is cached and is only re-read on demand - * If you revisit a part of the tree that you left earlier in your - session, the directory nodes will be opened/closed as you left them - * The script remembers the cursor position and window position in the NERD - tree so you can toggle it off (or just close the tree window) and then - reopen it (with NERDTreeToggle) the NERD tree window will appear exactly - as you left it - * You can have a separate NERD tree for each tab, share trees across tabs, - or a mix of both. - * By default the script overrides the default file browser (netw), so if - you :edit a directory a (slighly modified) NERD tree will appear in the - current window - * A programmable menu system is provided (simulates right clicking on a - node) - * one default menu plugin is provided to perform basic filesytem - operations (create/delete/move/copy files/directories) - * There's an API for adding your own keymappings - - -============================================================================== -2. Functionality provided *NERDTreeFunctionality* - ------------------------------------------------------------------------------- -2.1. Global Commands *NERDTreeGlobalCommands* - -:NERDTree [ | ] *:NERDTree* - Opens a fresh NERD tree. The root of the tree depends on the argument - given. There are 3 cases: If no argument is given, the current directory - will be used. If a directory is given, that will be used. If a bookmark - name is given, the corresponding directory will be used. For example: > - :NERDTree /home/marty/vim7/src - :NERDTree foo (foo is the name of a bookmark) -< -:NERDTreeFromBookmark *:NERDTreeFromBookmark* - Opens a fresh NERD tree with the root initialized to the dir for - . This only reason to use this command over :NERDTree is for - the completion (which is for bookmarks rather than directories). - -:NERDTreeToggle [ | ] *:NERDTreeToggle* - If a NERD tree already exists for this tab, it is reopened and rendered - again. If no NERD tree exists for this tab then this command acts the - same as the |:NERDTree| command. - -:NERDTreeMirror *:NERDTreeMirror* - Shares an existing NERD tree, from another tab, in the current tab. - Changes made to one tree are reflected in both as they are actually the - same buffer. - - If only one other NERD tree exists, that tree is automatically mirrored. If - more than one exists, the script will ask which tree to mirror. - -:NERDTreeClose *:NERDTreeClose* - Close the NERD tree in this tab. - -:NERDTreeFind *:NERDTreeFind* - Find the current file in the tree. If no tree exists for the current tab, - or the file is not under the current root, then initialize a new tree where - the root is the directory of the current file. - ------------------------------------------------------------------------------- -2.2. Bookmarks *NERDTreeBookmarks* - -Bookmarks in the NERD tree are a way to tag files or directories of interest. -For example, you could use bookmarks to tag all of your project directories. - ------------------------------------------------------------------------------- -2.2.1. The Bookmark Table *NERDTreeBookmarkTable* - -If the bookmark table is active (see |NERDTree-B| and -|'NERDTreeShowBookmarks'|), it will be rendered above the tree. You can double -click bookmarks or use the |NERDTree-o| mapping to activate them. See also, -|NERDTree-t| and |NERDTree-T| - ------------------------------------------------------------------------------- -2.2.2. Bookmark commands *NERDTreeBookmarkCommands* - -Note that the following commands are only available in the NERD tree buffer. - -:Bookmark - Bookmark the current node as . If there is already a - bookmark, it is overwritten. must not contain spaces. - -:BookmarkToRoot - Make the directory corresponding to the new root. If a treenode - corresponding to is already cached somewhere in the tree then - the current tree will be used, otherwise a fresh tree will be opened. - Note that if points to a file then its parent will be used - instead. - -:RevealBookmark - If the node is cached under the current root then it will be revealed - (i.e. directory nodes above it will be opened) and the cursor will be - placed on it. - -:OpenBookmark - must point to a file. The file is opened as though |NERDTree-o| - was applied. If the node is cached under the current root then it will be - revealed and the cursor will be placed on it. - -:ClearBookmarks [] - Remove all the given bookmarks. If no bookmarks are given then remove all - bookmarks on the current node. - -:ClearAllBookmarks - Remove all bookmarks. - -:ReadBookmarks - Re-read the bookmarks in the |'NERDTreeBookmarksFile'|. - -See also |:NERDTree| and |:NERDTreeFromBookmark|. - ------------------------------------------------------------------------------- -2.2.3. Invalid Bookmarks *NERDTreeInvalidBookmarks* - -If invalid bookmarks are detected, the script will issue an error message and -the invalid bookmarks will become unavailable for use. - -These bookmarks will still be stored in the bookmarks file (see -|'NERDTreeBookmarksFile'|), down the bottom. There will always be a blank line -after the valid bookmarks but before the invalid ones. - -Each line in the bookmarks file represents one bookmark. The proper format is: - - -After you have corrected any invalid bookmarks, either restart vim, or go -:ReadBookmarks from the NERD tree window. - ------------------------------------------------------------------------------- -2.3. NERD tree Mappings *NERDTreeMappings* - -Default Description~ help-tag~ -Key~ - -o.......Open files, directories and bookmarks....................|NERDTree-o| -go......Open selected file, but leave cursor in the NERDTree.....|NERDTree-go| -t.......Open selected node/bookmark in a new tab.................|NERDTree-t| -T.......Same as 't' but keep the focus on the current tab........|NERDTree-T| -i.......Open selected file in a split window.....................|NERDTree-i| -gi......Same as i, but leave the cursor on the NERDTree..........|NERDTree-gi| -s.......Open selected file in a new vsplit.......................|NERDTree-s| -gs......Same as s, but leave the cursor on the NERDTree..........|NERDTree-gs| -O.......Recursively open the selected directory..................|NERDTree-O| -x.......Close the current nodes parent...........................|NERDTree-x| -X.......Recursively close all children of the current node.......|NERDTree-X| -e.......Edit the current dif.....................................|NERDTree-e| - -...............same as |NERDTree-o|. -double-click.......same as the |NERDTree-o| map. -middle-click.......same as |NERDTree-i| for files, same as - |NERDTree-e| for dirs. - -D.......Delete the current bookmark .............................|NERDTree-D| - -P.......Jump to the root node....................................|NERDTree-P| -p.......Jump to current nodes parent.............................|NERDTree-p| -K.......Jump up inside directories at the current tree depth.....|NERDTree-K| -J.......Jump down inside directories at the current tree depth...|NERDTree-J| -...Jump down to the next sibling of the current directory...|NERDTree-C-J| -...Jump up to the previous sibling of the current directory.|NERDTree-C-K| - -C.......Change the tree root to the selected dir.................|NERDTree-C| -u.......Move the tree root up one directory......................|NERDTree-u| -U.......Same as 'u' except the old root node is left open........|NERDTree-U| -r.......Recursively refresh the current directory................|NERDTree-r| -R.......Recursively refresh the current root.....................|NERDTree-R| -m.......Display the NERD tree menu...............................|NERDTree-m| -cd......Change the CWD to the dir of the selected node...........|NERDTree-cd| - -I.......Toggle whether hidden files displayed....................|NERDTree-I| -f.......Toggle whether the file filters are used.................|NERDTree-f| -F.......Toggle whether files are displayed.......................|NERDTree-F| -B.......Toggle whether the bookmark table is displayed...........|NERDTree-B| - -q.......Close the NERDTree window................................|NERDTree-q| -A.......Zoom (maximize/minimize) the NERDTree window.............|NERDTree-A| -?.......Toggle the display of the quick help.....................|NERDTree-?| - ------------------------------------------------------------------------------- - *NERDTree-o* -Default key: o -Map option: NERDTreeMapActivateNode -Applies to: files and directories. - -If a file node is selected, it is opened in the previous window. - -If a directory is selected it is opened or closed depending on its current -state. - -If a bookmark that links to a directory is selected then that directory -becomes the new root. - -If a bookmark that links to a file is selected then that file is opened in the -previous window. - ------------------------------------------------------------------------------- - *NERDTree-go* -Default key: go -Map option: None -Applies to: files. - -If a file node is selected, it is opened in the previous window, but the -cursor does not move. - -The key combo for this mapping is always "g" + NERDTreeMapActivateNode (see -|NERDTree-o|). - ------------------------------------------------------------------------------- - *NERDTree-t* -Default key: t -Map option: NERDTreeMapOpenInTab -Applies to: files and directories. - -Opens the selected file in a new tab. If a directory is selected, a fresh -NERD Tree for that directory is opened in a new tab. - -If a bookmark which points to a directory is selected, open a NERD tree for -that directory in a new tab. If the bookmark points to a file, open that file -in a new tab. - ------------------------------------------------------------------------------- - *NERDTree-T* -Default key: T -Map option: NERDTreeMapOpenInTabSilent -Applies to: files and directories. - -The same as |NERDTree-t| except that the focus is kept in the current tab. - ------------------------------------------------------------------------------- - *NERDTree-i* -Default key: i -Map option: NERDTreeMapOpenSplit -Applies to: files. - -Opens the selected file in a new split window and puts the cursor in the new -window. - ------------------------------------------------------------------------------- - *NERDTree-gi* -Default key: gi -Map option: None -Applies to: files. - -The same as |NERDTree-i| except that the cursor is not moved. - -The key combo for this mapping is always "g" + NERDTreeMapOpenSplit (see -|NERDTree-i|). - ------------------------------------------------------------------------------- - *NERDTree-s* -Default key: s -Map option: NERDTreeMapOpenVSplit -Applies to: files. - -Opens the selected file in a new vertically split window and puts the cursor in -the new window. - ------------------------------------------------------------------------------- - *NERDTree-gs* -Default key: gs -Map option: None -Applies to: files. - -The same as |NERDTree-s| except that the cursor is not moved. - -The key combo for this mapping is always "g" + NERDTreeMapOpenVSplit (see -|NERDTree-s|). - ------------------------------------------------------------------------------- - *NERDTree-O* -Default key: O -Map option: NERDTreeMapOpenRecursively -Applies to: directories. - -Recursively opens the selelected directory. - -All files and directories are cached, but if a directory would not be -displayed due to file filters (see |'NERDTreeIgnore'| |NERDTree-f|) or the -hidden file filter (see |'NERDTreeShowHidden'|) then its contents are not -cached. This is handy, especially if you have .svn directories. - ------------------------------------------------------------------------------- - *NERDTree-x* -Default key: x -Map option: NERDTreeMapCloseDir -Applies to: files and directories. - -Closes the parent of the selected node. - ------------------------------------------------------------------------------- - *NERDTree-X* -Default key: X -Map option: NERDTreeMapCloseChildren -Applies to: directories. - -Recursively closes all children of the selected directory. - -Tip: To quickly "reset" the tree, use |NERDTree-P| with this mapping. - ------------------------------------------------------------------------------- - *NERDTree-e* -Default key: e -Map option: NERDTreeMapOpenExpl -Applies to: files and directories. - -|:edit|s the selected directory, or the selected file's directory. This could -result in a NERD tree or a netrw being opened, depending on -|'NERDTreeHijackNetrw'|. - ------------------------------------------------------------------------------- - *NERDTree-D* -Default key: D -Map option: NERDTreeMapDeleteBookmark -Applies to: lines in the bookmarks table - -Deletes the currently selected bookmark. - ------------------------------------------------------------------------------- - *NERDTree-P* -Default key: P -Map option: NERDTreeMapJumpRoot -Applies to: no restrictions. - -Jump to the tree root. - ------------------------------------------------------------------------------- - *NERDTree-p* -Default key: p -Map option: NERDTreeMapJumpParent -Applies to: files and directories. - -Jump to the parent node of the selected node. - ------------------------------------------------------------------------------- - *NERDTree-K* -Default key: K -Map option: NERDTreeMapJumpFirstChild -Applies to: files and directories. - -Jump to the first child of the current nodes parent. - -If the cursor is already on the first node then do the following: - * loop back thru the siblings of the current nodes parent until we find an - open dir with children - * go to the first child of that node - ------------------------------------------------------------------------------- - *NERDTree-J* -Default key: J -Map option: NERDTreeMapJumpLastChild -Applies to: files and directories. - -Jump to the last child of the current nodes parent. - -If the cursor is already on the last node then do the following: - * loop forward thru the siblings of the current nodes parent until we find - an open dir with children - * go to the last child of that node - ------------------------------------------------------------------------------- - *NERDTree-C-J* -Default key: -Map option: NERDTreeMapJumpNextSibling -Applies to: files and directories. - -Jump to the next sibling of the selected node. - ------------------------------------------------------------------------------- - *NERDTree-C-K* -Default key: -Map option: NERDTreeMapJumpPrevSibling -Applies to: files and directories. - -Jump to the previous sibling of the selected node. - ------------------------------------------------------------------------------- - *NERDTree-C* -Default key: C -Map option: NERDTreeMapChdir -Applies to: directories. - -Make the selected directory node the new tree root. If a file is selected, its -parent is used. - ------------------------------------------------------------------------------- - *NERDTree-u* -Default key: u -Map option: NERDTreeMapUpdir -Applies to: no restrictions. - -Move the tree root up a dir (like doing a "cd .."). - ------------------------------------------------------------------------------- - *NERDTree-U* -Default key: U -Map option: NERDTreeMapUpdirKeepOpen -Applies to: no restrictions. - -Like |NERDTree-u| except that the old tree root is kept open. - ------------------------------------------------------------------------------- - *NERDTree-r* -Default key: r -Map option: NERDTreeMapRefresh -Applies to: files and directories. - -If a dir is selected, recursively refresh that dir, i.e. scan the filesystem -for changes and represent them in the tree. - -If a file node is selected then the above is done on it's parent. - ------------------------------------------------------------------------------- - *NERDTree-R* -Default key: R -Map option: NERDTreeMapRefreshRoot -Applies to: no restrictions. - -Recursively refresh the tree root. - ------------------------------------------------------------------------------- - *NERDTree-m* -Default key: m -Map option: NERDTreeMapMenu -Applies to: files and directories. - -Display the NERD tree menu. See |NERDTreeMenu| for details. - ------------------------------------------------------------------------------- - *NERDTree-cd* -Default key: cd -Map option: NERDTreeMapChdir -Applies to: files and directories. - -Change vims current working directory to that of the selected node. - ------------------------------------------------------------------------------- - *NERDTree-I* -Default key: I -Map option: NERDTreeMapToggleHidden -Applies to: no restrictions. - -Toggles whether hidden files (i.e. "dot files") are displayed. - ------------------------------------------------------------------------------- - *NERDTree-f* -Default key: f -Map option: NERDTreeMapToggleFilters -Applies to: no restrictions. - -Toggles whether file filters are used. See |'NERDTreeIgnore'| for details. - ------------------------------------------------------------------------------- - *NERDTree-F* -Default key: F -Map option: NERDTreeMapToggleFiles -Applies to: no restrictions. - -Toggles whether file nodes are displayed. - ------------------------------------------------------------------------------- - *NERDTree-B* -Default key: B -Map option: NERDTreeMapToggleBookmarks -Applies to: no restrictions. - -Toggles whether the bookmarks table is displayed. - ------------------------------------------------------------------------------- - *NERDTree-q* -Default key: q -Map option: NERDTreeMapQuit -Applies to: no restrictions. - -Closes the NERDtree window. - ------------------------------------------------------------------------------- - *NERDTree-A* -Default key: A -Map option: NERDTreeMapToggleZoom -Applies to: no restrictions. - -Maximize (zoom) and minimize the NERDtree window. - ------------------------------------------------------------------------------- - *NERDTree-?* -Default key: ? -Map option: NERDTreeMapHelp -Applies to: no restrictions. - -Toggles whether the quickhelp is displayed. - ------------------------------------------------------------------------------- -2.3. The NERD tree menu *NERDTreeMenu* - -The NERD tree has a menu that can be programmed via the an API (see -|NERDTreeMenuAPI|). The idea is to simulate the "right click" menus that most -file explorers have. - -The script comes with two default menu plugins: exec_menuitem.vim and -fs_menu.vim. fs_menu.vim adds some basic filesystem operations to the menu for -creating/deleting/moving/copying files and dirs. exec_menuitem.vim provides a -menu item to execute executable files. - -Related tags: |NERDTree-m| |NERDTreeApi| - -============================================================================== -3. Customisation *NERDTreeOptions* - - ------------------------------------------------------------------------------- -3.1. Customisation summary *NERDTreeOptionSummary* - -The script provides the following options that can customise the behaviour the -NERD tree. These options should be set in your vimrc. - -|'loaded_nerd_tree'| Turns off the script. - -|'NERDChristmasTree'| Tells the NERD tree to make itself colourful - and pretty. - -|'NERDTreeAutoCenter'| Controls whether the NERD tree window centers - when the cursor moves within a specified - distance to the top/bottom of the window. -|'NERDTreeAutoCenterThreshold'| Controls the sensitivity of autocentering. - -|'NERDTreeCaseSensitiveSort'| Tells the NERD tree whether to be case - sensitive or not when sorting nodes. - -|'NERDTreeChDirMode'| Tells the NERD tree if/when it should change - vim's current working directory. - -|'NERDTreeHighlightCursorline'| Tell the NERD tree whether to highlight the - current cursor line. - -|'NERDTreeHijackNetrw'| Tell the NERD tree whether to replace the netrw - autocommands for exploring local directories. - -|'NERDTreeIgnore'| Tells the NERD tree which files to ignore. - -|'NERDTreeBookmarksFile'| Where the bookmarks are stored. - -|'NERDTreeMouseMode'| Tells the NERD tree how to handle mouse - clicks. - -|'NERDTreeQuitOnOpen'| Closes the tree window after opening a file. - -|'NERDTreeShowBookmarks'| Tells the NERD tree whether to display the - bookmarks table on startup. - -|'NERDTreeShowFiles'| Tells the NERD tree whether to display files - in the tree on startup. - -|'NERDTreeShowHidden'| Tells the NERD tree whether to display hidden - files on startup. - -|'NERDTreeShowLineNumbers'| Tells the NERD tree whether to display line - numbers in the tree window. - -|'NERDTreeSortOrder'| Tell the NERD tree how to sort the nodes in - the tree. - -|'NERDTreeStatusline'| Set a statusline for NERD tree windows. - -|'NERDTreeWinPos'| Tells the script where to put the NERD tree - window. - -|'NERDTreeWinSize'| Sets the window size when the NERD tree is - opened. - ------------------------------------------------------------------------------- -3.2. Customisation details *NERDTreeOptionDetails* - -To enable any of the below options you should put the given line in your -~/.vimrc - - *'loaded_nerd_tree'* -If this plugin is making you feel homicidal, it may be a good idea to turn it -off with this line in your vimrc: > - let loaded_nerd_tree=1 -< ------------------------------------------------------------------------------- - *'NERDChristmasTree'* -Values: 0 or 1. -Default: 1. - -If this option is set to 1 then some extra syntax highlighting elements are -added to the nerd tree to make it more colourful. - -Set it to 0 for a more vanilla looking tree. - ------------------------------------------------------------------------------- - *'NERDTreeAutoCenter'* -Values: 0 or 1. -Default: 1 - -If set to 1, the NERD tree window will center around the cursor if it moves to -within |'NERDTreeAutoCenterThreshold'| lines of the top/bottom of the window. - -This is ONLY done in response to tree navigation mappings, -i.e. |NERDTree-J| |NERDTree-K| |NERDTree-C-J| |NERDTree-C-K| |NERDTree-p| -|NERDTree-P| - -The centering is done with a |zz| operation. - ------------------------------------------------------------------------------- - *'NERDTreeAutoCenterThreshold'* -Values: Any natural number. -Default: 3 - -This option controls the "sensitivity" of the NERD tree auto centering. See -|'NERDTreeAutoCenter'| for details. - ------------------------------------------------------------------------------- - *'NERDTreeCaseSensitiveSort'* -Values: 0 or 1. -Default: 0. - -By default the NERD tree does not sort nodes case sensitively, i.e. nodes -could appear like this: > - bar.c - Baz.c - blarg.c - boner.c - Foo.c -< -But, if you set this option to 1 then the case of the nodes will be taken into -account. The above nodes would then be sorted like this: > - Baz.c - Foo.c - bar.c - blarg.c - boner.c -< ------------------------------------------------------------------------------- - *'NERDTreeChDirMode'* - -Values: 0, 1 or 2. -Default: 0. - -Use this option to tell the script when (if at all) to change the current -working directory (CWD) for vim. - -If it is set to 0 then the CWD is never changed by the NERD tree. - -If set to 1 then the CWD is changed when the NERD tree is first loaded to the -directory it is initialized in. For example, if you start the NERD tree with > - :NERDTree /home/marty/foobar -< -then the CWD will be changed to /home/marty/foobar and will not be changed -again unless you init another NERD tree with a similar command. - -If the option is set to 2 then it behaves the same as if set to 1 except that -the CWD is changed whenever the tree root is changed. For example, if the CWD -is /home/marty/foobar and you make the node for /home/marty/foobar/baz the new -root then the CWD will become /home/marty/foobar/baz. - ------------------------------------------------------------------------------- - *'NERDTreeHighlightCursorline'* -Values: 0 or 1. -Default: 1. - -If set to 1, the current cursor line in the NERD tree buffer will be -highlighted. This is done using the |'cursorline'| option. - ------------------------------------------------------------------------------- - *'NERDTreeHijackNetrw'* -Values: 0 or 1. -Default: 1. - -If set to 1, doing a > - :edit -< -will open up a "secondary" NERD tree instead of a netrw in the target window. - -Secondary NERD trees behaves slighly different from a regular trees in the -following respects: - 1. 'o' will open the selected file in the same window as the tree, - replacing it. - 2. you can have as many secondary tree as you want in the same tab. - ------------------------------------------------------------------------------- - *'NERDTreeIgnore'* -Values: a list of regular expressions. -Default: ['\~$']. - -This option is used to specify which files the NERD tree should ignore. It -must be a list of regular expressions. When the NERD tree is rendered, any -files/dirs that match any of the regex's in 'NERDTreeIgnore' wont be -displayed. - -For example if you put the following line in your vimrc: > - let NERDTreeIgnore=['\.vim$', '\~$'] -< -then all files ending in .vim or ~ will be ignored. - -Note: to tell the NERD tree not to ignore any files you must use the following -line: > - let NERDTreeIgnore=[] -< - -The file filters can be turned on and off dynamically with the |NERDTree-f| -mapping. - ------------------------------------------------------------------------------- - *'NERDTreeBookmarksFile'* -Values: a path -Default: $HOME/.NERDTreeBookmarks - -This is where bookmarks are saved. See |NERDTreeBookmarkCommands|. - ------------------------------------------------------------------------------- - *'NERDTreeMouseMode'* -Values: 1, 2 or 3. -Default: 1. - -If set to 1 then a double click on a node is required to open it. -If set to 2 then a single click will open directory nodes, while a double -click will still be required for file nodes. -If set to 3 then a single click will open any node. - -Note: a double click anywhere on a line that a tree node is on will -activate it, but all single-click activations must be done on name of the node -itself. For example, if you have the following node: > - | | |-application.rb -< -then (to single click activate it) you must click somewhere in -'application.rb'. - ------------------------------------------------------------------------------- - *'NERDTreeQuitOnOpen'* - -Values: 0 or 1. -Default: 0 - -If set to 1, the NERD tree window will close after opening a file with the -|NERDTree-o|, |NERDTree-i|, |NERDTree-t| and |NERDTree-T| mappings. - ------------------------------------------------------------------------------- - *'NERDTreeShowBookmarks'* -Values: 0 or 1. -Default: 0. - -If this option is set to 1 then the bookmarks table will be displayed. - -This option can be toggled dynamically, per tree, with the |NERDTree-B| -mapping. - ------------------------------------------------------------------------------- - *'NERDTreeShowFiles'* -Values: 0 or 1. -Default: 1. - -If this option is set to 1 then files are displayed in the NERD tree. If it is -set to 0 then only directories are displayed. - -This option can be toggled dynamically, per tree, with the |NERDTree-F| -mapping and is useful for drastically shrinking the tree when you are -navigating to a different part of the tree. - ------------------------------------------------------------------------------- - *'NERDTreeShowHidden'* -Values: 0 or 1. -Default: 0. - -This option tells vim whether to display hidden files by default. This option -can be dynamically toggled, per tree, with the |NERDTree-I| mapping. Use one -of the follow lines to set this option: > - let NERDTreeShowHidden=0 - let NERDTreeShowHidden=1 -< - ------------------------------------------------------------------------------- - *'NERDTreeShowLineNumbers'* -Values: 0 or 1. -Default: 0. - -This option tells vim whether to display line numbers for the NERD tree -window. Use one of the follow lines to set this option: > - let NERDTreeShowLineNumbers=0 - let NERDTreeShowLineNumbers=1 -< - ------------------------------------------------------------------------------- - *'NERDTreeSortOrder'* -Values: a list of regular expressions. -Default: ['\/$', '*', '\.swp$', '\.bak$', '\~$'] - -This option is set to a list of regular expressions which are used to -specify the order of nodes under their parent. - -For example, if the option is set to: > - ['\.vim$', '\.c$', '\.h$', '*', 'foobar'] -< -then all .vim files will be placed at the top, followed by all .c files then -all .h files. All files containing the string 'foobar' will be placed at the -end. The star is a special flag: it tells the script that every node that -doesnt match any of the other regexps should be placed here. - -If no star is present in 'NERDTreeSortOrder' then one is automatically -appended to the array. - -The regex '\/$' should be used to match directory nodes. - -After this sorting is done, the files in each group are sorted alphabetically. - -Other examples: > - (1) ['*', '\/$'] - (2) [] - (3) ['\/$', '\.rb$', '\.php$', '*', '\.swp$', '\.bak$', '\~$'] -< -1. Directories will appear last, everything else will appear above. -2. Everything will simply appear in alphabetical order. -3. Dirs will appear first, then ruby and php. Swap files, bak files and vim - backup files will appear last with everything else preceding them. - ------------------------------------------------------------------------------- - *'NERDTreeStatusline'* -Values: Any valid statusline setting. -Default: %{b:NERDTreeRoot.path.strForOS(0)} - -Tells the script what to use as the |'statusline'| setting for NERD tree -windows. - -Note that the statusline is set using |:let-&| not |:set| so escaping spaces -isn't necessary. - -Setting this option to -1 will will deactivate it so that your global -statusline setting is used instead. - ------------------------------------------------------------------------------- - *'NERDTreeWinPos'* -Values: "left" or "right" -Default: "left". - -This option is used to determine where NERD tree window is placed on the -screen. - -This option makes it possible to use two different explorer plugins -simultaneously. For example, you could have the taglist plugin on the left of -the window and the NERD tree on the right. - ------------------------------------------------------------------------------- - *'NERDTreeWinSize'* -Values: a positive integer. -Default: 31. - -This option is used to change the size of the NERD tree when it is loaded. - -============================================================================== -4. The NERD tree API *NERDTreeAPI* - -The NERD tree script allows you to add custom key mappings and menu items via -a set of API calls. Any scripts that use this API should be placed in -~/.vim/nerdtree_plugin/ (*nix) or ~/vimfiles/nerdtree_plugin (windows). - -The script exposes some prototype objects that can be used to manipulate the -tree and/or get information from it: > - g:NERDTreePath - g:NERDTreeDirNode - g:NERDTreeFileNode - g:NERDTreeBookmark -< -See the code/comments in NERD_tree.vim to find how to use these objects. The -following code conventions are used: - * class members start with a capital letter - * instance members start with a lower case letter - * private members start with an underscore - -See this blog post for more details: - http://got-ravings.blogspot.com/2008/09/vim-pr0n-prototype-based-objects.html - ------------------------------------------------------------------------------- -4.1. Key map API *NERDTreeKeymapAPI* - -NERDTreeAddKeyMap({options}) *NERDTreeAddKeyMap()* - Adds a new keymapping for all NERD tree buffers. - {options} must be a dictionary, and must contain the following keys: - "key" - the trigger key for the new mapping - "callback" - the function the new mapping will be bound to - "quickhelpText" - the text that will appear in the quickhelp (see - |NERDTree-?|) - - Example: > - call NERDTreeAddKeyMap({ - \ 'key': 'b', - \ 'callback': 'NERDTreeEchoCurrentNode', - \ 'quickhelpText': 'echo full path of current node' }) - - function! NERDTreeEchoCurrentNode() - let n = g:NERDTreeFileNode.GetSelected() - if n != {} - echomsg 'Current node: ' . n.path.str() - endif - endfunction -< - This code should sit in a file like ~/.vim/nerdtree_plugin/mymapping.vim. - It adds a (rather useless) mapping on 'b' which echos the full path to the - current node. - ------------------------------------------------------------------------------- -4.2. Menu API *NERDTreeMenuAPI* - -NERDTreeAddSubmenu({options}) *NERDTreeAddSubmenu()* - Creates and returns a new submenu. - - {options} must be a dictionary and must contain the following keys: - "text" - the text of the submenu that the user will see - "shortcut" - a shortcut key for the submenu (need not be unique) - - The following keys are optional: - "isActiveCallback" - a function that will be called to determine whether - this submenu item will be displayed or not. The callback function must return - 0 or 1. - "parent" - the parent submenu of the new submenu (returned from a previous - invocation of NERDTreeAddSubmenu()). If this key is left out then the new - submenu will sit under the top level menu. - - See below for an example. - -NERDTreeAddMenuItem({options}) *NERDTreeAddMenuItem()* - Adds a new menu item to the NERD tree menu (see |NERDTreeMenu|). - - {options} must be a dictionary and must contain the - following keys: - "text" - the text of the menu item which the user will see - "shortcut" - a shortcut key for the menu item (need not be unique) - "callback" - the function that will be called when the user activates the - menu item. - - The following keys are optional: - "isActiveCallback" - a function that will be called to determine whether - this menu item will be displayed or not. The callback function must return - 0 or 1. - "parent" - if the menu item belongs under a submenu then this key must be - specified. This value for this key will be the object that - was returned when the submenu was created with |NERDTreeAddSubmenu()|. - - See below for an example. - -NERDTreeAddMenuSeparator([{options}]) *NERDTreeAddMenuSeparator()* - Adds a menu separator (a row of dashes). - - {options} is an optional dictionary that may contain the following keys: - "isActiveCallback" - see description in |NERDTreeAddMenuItem()|. - -Below is an example of the menu API in action. > - call NERDTreeAddMenuSeparator() - - call NERDTreeAddMenuItem({ - \ 'text': 'a (t)op level menu item', - \ 'shortcut': 't', - \ 'callback': 'SomeFunction' }) - - let submenu = NERDTreeAddSubmenu({ - \ 'text': 'a (s)ub menu', - \ 'shortcut': 's' }) - - call NERDTreeAddMenuItem({ - \ 'text': '(n)ested item 1', - \ 'shortcut': 'n', - \ 'callback': 'SomeFunction', - \ 'parent': submenu }) - - call NERDTreeAddMenuItem({ - \ 'text': '(n)ested item 2', - \ 'shortcut': 'n', - \ 'callback': 'SomeFunction', - \ 'parent': submenu }) -< -This will create the following menu: > - -------------------- - a (t)op level menu item - a (s)ub menu -< -Where selecting "a (s)ub menu" will lead to a second menu: > - (n)ested item 1 - (n)ested item 2 -< -When any of the 3 concrete menu items are selected the function "SomeFunction" -will be called. - ------------------------------------------------------------------------------- -NERDTreeRender() *NERDTreeRender()* - Re-renders the NERD tree buffer. Useful if you change the state of the - tree and you want to it to be reflected in the UI. - -============================================================================== -5. About *NERDTreeAbout* - -The author of the NERD tree is a terrible terrible monster called Martyzilla -who gobbles up small children with milk and sugar for breakfast. - -He can be reached at martin.grenfell at gmail dot com. He would love to hear -from you, so feel free to send him suggestions and/or comments about this -plugin. Don't be shy --- the worst he can do is slaughter you and stuff you in -the fridge for later ;) - -The latest stable versions can be found at - http://www.vim.org/scripts/script.php?script_id=1658 - -The latest dev versions are on github - http://github.com/scrooloose/nerdtree - - -============================================================================== -6. Changelog *NERDTreeChangelog* - -4.1.0 - features: - - NERDTreeFind to reveal the node for the current buffer in the tree, - see |NERDTreeFind|. This effectively merges the FindInNERDTree plugin (by - Doug McInnes) into the script. - - make NERDTreeQuitOnOpen apply to the t/T keymaps too. Thanks to Stefan - Ritter and Rémi Prévost. - - truncate the root node if wider than the tree window. Thanks to Victor - Gonzalez. - - bugfixes: - - really fix window state restoring - - fix some win32 path escaping issues. Thanks to Stephan Baumeister, Ricky, - jfilip1024, and Chris Chambers - -4.0.0 - - add a new programmable menu system (see :help NERDTreeMenu). - - add new APIs to add menus/menu-items to the menu system as well as - custom key mappings to the NERD tree buffer (see :help NERDTreeAPI). - - removed the old API functions - - added a mapping to maximize/restore the size of nerd tree window, thanks - to Guillaume Duranceau for the patch. See :help NERDTree-A for details. - - - fix a bug where secondary nerd trees (netrw hijacked trees) and - NERDTreeQuitOnOpen didnt play nicely, thanks to Curtis Harvey. - - fix a bug where the script ignored directories whose name ended in a dot, - thanks to Aggelos Orfanakos for the patch. - - fix a bug when using the x mapping on the tree root, thanks to Bryan - Venteicher for the patch. - - fix a bug where the cursor position/window size of the nerd tree buffer - wasnt being stored on closing the window, thanks to Richard Hart. - - fix a bug where NERDTreeMirror would mirror the wrong tree - -3.1.1 - - fix a bug where a non-listed no-name buffer was getting created every - time the tree windows was created, thanks to Derek Wyatt and owen1 - - make behave the same as the 'o' mapping - - some helptag fixes in the doc, thanks strull - - fix a bug when using :set nohidden and opening a file where the previous - buf was modified. Thanks iElectric - - other minor fixes - -3.1.0 - New features: - - add mappings to open files in a vsplit, see :help NERDTree-s and :help - NERDTree-gs - - make the statusline for the nerd tree window default to something - hopefully more useful. See :help 'NERDTreeStatusline' - Bugfixes: - - make the hijack netrw functionality work when vim is started with "vim - " (thanks to Alf Mikula for the patch). - - fix a bug where the CWD wasnt being changed for some operations even when - NERDTreeChDirMode==2 (thanks to Lucas S. Buchala) - - add -bar to all the nerd tree :commands so they can chain with other - :commands (thanks to tpope) - - fix bugs when ignorecase was set (thanks to nach) - - fix a bug with the relative path code (thanks to nach) - - fix a bug where doing a :cd would cause :NERDTreeToggle to fail (thanks nach) - - -3.0.1 - Bugfixes: - - fix bugs with :NERDTreeToggle and :NERDTreeMirror when 'hidden - was not set - - fix a bug where :NERDTree would fail if was relative and - didnt start with a ./ or ../ Thanks to James Kanze. - - make the q mapping work with secondary (:e style) trees, - thanks to jamessan - - fix a bunch of small bugs with secondary trees - - More insane refactoring. - -3.0.0 - - hijack netrw so that doing an :edit will put a NERD tree in - the window rather than a netrw browser. See :help 'NERDTreeHijackNetrw' - - allow sharing of trees across tabs, see :help :NERDTreeMirror - - remove "top" and "bottom" as valid settings for NERDTreeWinPos - - change the '' mapping to 'i' - - change the 'H' mapping to 'I' - - lots of refactoring - -============================================================================== -7. Credits *NERDTreeCredits* - -Thanks to the following people for testing, bug reports, ideas etc. Without -you I probably would have got bored of the hacking the NERD tree and -just downloaded pr0n instead. - - Tim Carey-Smith (halorgium) - Vigil - Nick Brettell - Thomas Scott Urban - Terrance Cohen - Yegappan Lakshmanan - Jason Mills - Michael Geddes (frogonwheels) - Yu Jun - Michael Madsen - AOYAMA Shotaro - Zhang Weiwu - Niels Aan de Brugh - Olivier Yiptong - Zhang Shuhan - Cory Echols - Piotr Czachur - Yuan Jiang - Matan Nassau - Maxim Kim - Charlton Wang - Matt Wozniski (godlygeek) - knekk - Sean Chou - Ryan Penn - Simon Peter Nicholls - Michael Foobar - Tomasz Chomiuk - Denis Pokataev - Tim Pope (tpope) - James Kanze - James Vega (jamessan) - Frederic Chanal (nach) - Alf Mikula - Lucas S. Buchala - Curtis Harvey - Guillaume Duranceau - Richard Hart (hates) - Doug McInnes - Stefan Ritter - Rémi Prévost - Victor Gonzalez - Stephan Baumeister - Ricky - jfilip1024 - Chris Chambers - -============================================================================== -8. License *NERDTreeLicense* - -The NERD tree is released under the wtfpl. -See http://sam.zoy.org/wtfpl/COPYING. diff --git a/modules/vim/vim.dot.link/doc/bufexplorer.txt b/modules/vim/vim.dot.link/doc/bufexplorer.txt deleted file mode 100644 index 5d2fbcf..0000000 --- a/modules/vim/vim.dot.link/doc/bufexplorer.txt +++ /dev/null @@ -1,547 +0,0 @@ -*bufexplorer.txt* Buffer Explorer Last Change: 23 Dec 2012 - -Buffer Explorer *buffer-explorer* *bufexplorer* - Version 7.3.2 - -Plugin for easily exploring (or browsing) Vim |:buffers|. - -|bufexplorer-installation| Installation -|bufexplorer-usage| Usage -|bufexplorer-windowlayout| Window Layout -|bufexplorer-customization| Customization -|bufexplorer-changelog| Change Log -|bufexplorer-todo| Todo -|bufexplorer-credits| Credits - -For Vim version 7.0 and above. -This plugin is only available if 'compatible' is not set. - -{Vi does not have any of this} - -============================================================================== -INSTALLATION *bufexplorer-installation* - -To install: - - Download the bufexplorer.zip. - - Extract the zip archive into your runtime directory. - The archive contains plugin/bufexplorer.vim, and doc/bufexplorer.txt. - - Start Vim or goto an existing instance of Vim. - - Execute the following command: -> - :helptag /doc -< - This will generate all the help tags for any file located in the doc - directory. - -============================================================================== -USAGE *bufexplorer-usage* - -To start exploring in the current window, use: > - \be or :BufExplorer or Your custom key mapping -To start exploring in a newly split horizontal window, use: > - \bs or :BufExplorerHorizontalSplit or Your custom key mapping -To start exploring in a newly split vertical window, use: > - \bv or :BufExplorerVerticalSplit or Your custom key mapping - -If you would like to use something other than '\', you may simply change the -leader (see |mapleader|). - -Note: If the current buffer is modified when bufexplorer started, the current - window is always split and the new bufexplorer is displayed in that new - window. - -Commands to use once exploring: - - Toggle help information. - Opens the buffer that is under the cursor into the current - window. - Opens the buffer that is under the cursor into the current - window. - Opens the buffer that is under the cursor in another tab. - B Works in association with the|ShowTabBuffer|option. If - |ShowTabBuffer|is set to 1, this toggles if BufExplorer is to - only store the most recent tab for this buffer or not. - d |:delete|the buffer under the cursor from the list. The - buffer's 'buflisted' is cleared. This allows for the buffer to - be displayed again using the 'show unlisted' command. - D |:wipeout|the buffer under the cursor from the list. When a - buffers is wiped, it will not be shown when unlisted buffer are - displayed. - f Toggles whether you are taken to the active window when - selecting a buffer or not. - o Opens the buffer that is under the cursor into the current - window. - p Toggles the showing of a split filename/pathname. - q Exit/Close bufexplorer. - r Reverses the order the buffers are listed in. - R Toggles relative path/absolute path. - s Cycle thru how the buffers are listed. Either by buffer - number, file name, file extension, most recently used (MRU), or - full path. - S Cycle thru how the buffers are listed, in reverse order. - Either by buffer number, file name, file extension, most - recently used (MRU), or full path. - T Toggles to show only buffers for this tab or not. - t Opens the buffer that is under the cursor in another tab. - u Toggles the showing of "unlisted" buffers. - -Once invoked, Buffer Explorer displays a sorted list (MRU is the default -sort method) of all the buffers that are currently opened. You are then -able to move the cursor to the line containing the buffer's name you are -wanting to act upon. Once you have selected the buffer you would like, -you can then either open it, close it(delete), resort the list, reverse -the sort, quit exploring and so on... - -=============================================================================== -WINDOW LAYOUT *bufexplorer-windowlayout* - -------------------------------------------------------------------------------- -" Press for Help -" Sorted by mru | Locate buffer | Absolute Split path -"= - 01 %a bufexplorer.txt C:\Vim\vimfiles\doc line 87 - 02 # bufexplorer.vim c:\Vim\vimfiles\plugin line 1 -------------------------------------------------------------------------------- - | | | | | - | | | | +-- Current Line #. - | | | +-- Relative/Full Path - | | +-- Buffer Name. - | +-- Buffer Attributes. See|:buffers|for more information. - +-- Buffer Number. See|:buffers|for more information. - -=============================================================================== -CUSTOMIZATION *bufexplorer-customization* - -If you do not like the default key mappings of \be, \bs, and \bv, you can -override bufexplorer's default mappings by setting up something like the -following in your vimrc file: - - noremap :BufExplorer - noremap :BufExplorerHorizontalSplit - noremap :BufExplorerVerticalSplit - - *g:bufExplorerChgWin* -If set, bufexplorer will bring up the selected buffer in the window specified -by g:bufExplorerChgWin. - - *g:bufExplorerDefaultHelp* -To control whether the default help is displayed or not, use: > - let g:bufExplorerDefaultHelp=0 " Do not show default help. - let g:bufExplorerDefaultHelp=1 " Show default help. -The default is to show the default help. - - *g:bufExplorerDetailedHelp* -To control whether detailed help is display by, use: > - let g:bufExplorerDetailedHelp=0 " Do not show detailed help. - let g:bufExplorerDetailedHelp=1 " Show detailed help. -The default is NOT to show detailed help. - - *g:bufExplorerFindActive* -To control whether you are taken to the active window when selecting a buffer, -use: > - let g:bufExplorerFindActive=0 " Do not go to active window. - let g:bufExplorerFindActive=1 " Go to active window. -The default is to be taken to the active window. - - *g:bufExplorerFuncRef* -When a buffer is selected, the functions specified either singly or as a list -will be called. - - *g:bufExplorerReverseSort* -To control whether to sort the buffer in reverse order or not, use: > - let g:bufExplorerReverseSort=0 " Do not sort in reverse order. - let g:bufExplorerReverseSort=1 " Sort in reverse order. -The default is NOT to sort in reverse order. - - *g:bufExplorerShowDirectories* -Directories usually show up in the list from using a command like ":e .". -To control whether to show directories in the buffer list or not, use: > - let g:bufExplorerShowDirectories=1 " Show directories. - let g:bufExplorerShowDirectories=0 " Don't show directories. -The default is to show directories. - - *g:bufExplorerShowRelativePath* -To control whether to show absolute paths or relative to the current -directory, use: > - let g:bufExplorerShowRelativePath=0 " Show absolute paths. - let g:bufExplorerShowRelativePath=1 " Show relative paths. -The default is to show absolute paths. - - *g:bufExplorerShowTabBuffer* -To control weither or not to show buffers on for the specific tab or not, use: > - let g:bufExplorerShowTabBuffer=0 " No. - let g:bufExplorerShowTabBuffer=1 " Yes. -The default is not to show. - - *g:bufExplorerShowUnlisted* -To control whether to show unlisted buffer or not, use: > - let g:bufExplorerShowUnlisted=0 " Do not show unlisted buffers. - let g:bufExplorerShowUnlisted=1 " Show unlisted buffers. -The default is to NOT show unlisted buffers. - - *g:bufExplorerSortBy* -To control what field the buffers are sorted by, use: > - let g:bufExplorerSortBy='extension' " Sort by file extension. - let g:bufExplorerSortBy='fullpath' " Sort by full file path name. - let g:bufExplorerSortBy='mru' " Sort by most recently used. - let g:bufExplorerSortBy='name' " Sort by the buffer's name. - let g:bufExplorerSortBy='number' " Sort by the buffer's number. -The default is to sort by mru. - - *g:bufExplorerSplitBelow* -To control where the new split window will be placed above or below the -current window, use: > - let g:bufExplorerSplitBelow=1 " Split new window below current. - let g:bufExplorerSplitBelow=0 " Split new window above current. -The default is to use what ever is set by the global &splitbelow -variable. - - *g:bufExplorerSplitOutPathName* -To control whether to split out the path and file name or not, use: > - let g:bufExplorerSplitOutPathName=1 " Split the path and file name. - let g:bufExplorerSplitOutPathName=0 " Don't split the path and file - " name. -The default is to split the path and file name. - - *g:bufExplorerSplitRight* -To control where the new vsplit window will be placed to the left or right of -current window, use: > - let g:bufExplorerSplitRight=0 " Split left. - let g:bufExplorerSplitRight=1 " Split right. -The default is to use the global &splitright. - -=============================================================================== -CHANGE LOG *bufexplorer-changelog* - -7.3.2 - Fix: - * Thanks go out to Michael Henry for pointing out that I completely - missed yet another function, ReverseSortSelect(), during the - refactoring. This function has now returned. -7.3.1 - Fix: - * Thanks go out to Brett Rasmussen for pointing out that the feature - added way back in version 7.2.3 by Yuriy Ershov to automatically - reposition the cursor to the line containing the active buffer, was - no longer in the plugin. That bit of code has been re-added and - all is well. -7.3.0 - It has been quite a while since I published a new version and this - is the first version since Vim 7.3 was released. - * Thanks to Tim Johnson for testing out this new version. - * I have put some time into reworking and cleaning up the code as - * well as various bug fixes. - * I have hopefully allowed for better mapping of the main public - methods as is explained in the|bufexplorer-customization|section - of the documentation. - * Add new 'B', 'o', and 'S' key mappings. - * Overall, I am hopeful that I not forgotten or lost a feature. -7.2.8 - Enhancements: - * Thanks to Charles Campbell for integrating bufexplorer with GDBMGR. - http://mysite.verizon.net/astronaut/vim/index.html#GDBMGR -7.2.7 - Fix: - * My 1st attempt to fix the "cache" issue where buffers information - has changed but the cache/display does not reflect those changes. - More work still needs to be done. -7.2.6 - Fix: - * Thanks to Michael Henry for pointing out that I totally forgot to - update the inline help to reflect the previous change to the 'd' - and 'D' keys. Opps! -7.2.5 - Fix: - * Philip Morant suggested switching the command (bwipe) associated - with the 'd' key with the command (bdelete) associated with the 'D' - key. This made sense since the 'd' key is more likely to be used - compared to the 'D' key. -7.2.4 - Fix: - * I did not implement the patch provided by Godefroid Chapelle - correctly. I missed one line which happened to be the most - important one :) -7.2.3 - Enhancements: - * Thanks to David Fishburn for helping me out with a much needed - code overhaul as well as some awesome performance enhancements. - He also reworked the handling of tabs. - * Thanks to Vladimir Dobriakov for making the suggestions on - enhancing the documentation to include a better explaination of - what is contained in the main bufexplorer window. - * Thanks to Yuriy Ershov for added code that when the bufexplorer - window is opened, the cursor is now positioned at the line with the - active buffer (useful in non-MRU sort modes). - * Yuriy also added the abiltiy to cycle through the sort fields in - reverse order. - Fixes: - * Thanks to Michael Henry for supplying a patch that allows - bufexplorer to be opened even when there is one buffer or less. - * Thanks to Godefroid Chapelle for supplying a patch that fixed - MRU sort order after loading a session. -7.2.2 - Fixes: - * Thanks to David L. Dight for spotting and fixing an issue when - using ctrl^. bufexplorer would incorrectly handle the previous - buffer so that when ctrl^ was pressed the incorrect file was opened. -7.2.1 - Fixes: - * Thanks to Dimitar for spotting and fixing a feature that was - inadvertently left out of the previous version. The feature was - when bufexplorer was used together with WinManager, you could use - the tab key to open a buffer in a split window. -7.2.0 - Enhancements: - * For all those missing the \bs and \bv commands, these have now - returned. Thanks to Phil O'Connell for asking for the return of - these missing features and helping test out this version. - Fixes: - * Fixed problem with the bufExplorerFindActive code not working - correctly. - * Fixed an incompatibility between bufexplorer and netrw that caused - buffers to be incorrectly removed from the MRU list. -7.1.7 - Fixes: - * TaCahiroy fixed several issues related to opening a buffer in a - tab. -7.1.6 - Fixes: - * Removed ff=unix from modeline in bufexplorer.txt. Found by Bill - McCarthy. -7.1.5 - Fixes: - * Could not open unnamed buffers. Fixed by TaCahiroy. -7.1.4 - Fixes: - * Sometimes when a file's path has 'white space' in it, extra buffers - would be created containing each piece of the path. i.e: - opening c:\document and settings\test.txt would create a buffer - named "and" and a buffer named "Documents". This was reported and - fixed by TaCa Yoss. -7.1.3 - Fixes: - * Added code to allow only one instance of the plugin to run at a - time. Thanks Dennis Hostetler. -7.1.2 - Fixes: - * Fixed a jumplist issue spotted by JiangJun. I overlooked the - 'jumplist' and with a couple calls to 'keepjumps', everything is - fine again. - * Went back to just having a plugin file, no autoload file. By having - the autoload, WinManager was no longer working and without really - digging into the cause, it was easier to go back to using just a - plugin file. -7.1.1 - Fixes: - * A problem spotted by Thomas Arendsen Hein. - When running Vim (7.1.94), error E493 was being thrown. - Enhancements: - * Added 'D' for 'delete' buffer as the 'd' command was a 'wipe' - buffer. -7.1.0 - Another 'major' update, some by Dave Larson, some by me. - * Making use of 'autoload' now to make the plugin load quicker. - * Removed '\bs' and '\bv'. These are now controlled by the user. The - user can issue a ':sp' or ':vs' to create a horizontal or vertical - split window and then issue a '\be' - * Added handling of tabs. -7.0.17 - Fixed issue with 'drop' command. - Various enhancements and improvements. -7.0.16 - Fixed issue reported by Liu Jiaping on non Windows systems, which was - ... - Open file1, open file2, modify file1, open bufexplorer, you get the - following error: - - --------8<-------- - Error detected while processing function - 14_StartBufExplorer..14_SplitOpen: - line 4: - E37: No write since last change (add ! to override) - - But the worse thing is, when I want to save the current buffer and - type ':w', I get another error message: - E382: Cannot write, 'buftype' option is set - --------8<-------- - -7.0.15 - Thanks to Mark Smithfield for suggesting bufexplorer needed to handle - the ':args' command. -7.0.14 - Thanks to Randall Hansen for removing the requirement of terminal - versions to be recompiled with 'gui' support so the 'drop' command - would work. The 'drop' command is really not needed in terminal - versions. -7.0.13 - Fixed integration with WinManager. - Thanks to Dave Eggum for another update. - - Fix: The detailed help didn't display the mapping for toggling - the split type, even though the split type is displayed. - - Fixed incorrect description in the detailed help for toggling - relative or full paths. - - Deprecated s:ExtractBufferNbr(). Vim's str2nr() does the same - thing. - - Created a s:Set() function that sets a variable only if it hasn't - already been defined. It's useful for initializing all those - default settings. - - Removed checks for repetitive command definitions. They were - unnecessary. - - Made the help highlighting a little more fancy. - - Minor reverse compatibility issue: Changed ambiguous setting - names to be more descriptive of what they do (also makes the code - easier to follow): - Changed bufExplorerSortDirection to bufExplorerReverseSort - Changed bufExplorerSplitType to bufExplorerSplitVertical - Changed bufExplorerOpenMode to bufExplorerUseCurrentWindow - - When the BufExplorer window closes, all the file-local marks are - now deleted. This may have the benefit of cleaning up some of the - jumplist. - - Changed the name of the parameter for StartBufExplorer from - "split" to "open". The parameter is a string which specifies how - the buffer will be open, not if it is split or not. - - Deprecated DoAnyMoreBuffersExist() - it is a one line function - only used in one spot. - - Created four functions (SplitOpen(), RebuildBufferList(), - UpdateHelpStatus() and ReSortListing()) all with one purpose - to - reduce repeated code. - - Changed the name of AddHeader() to CreateHelp() to be more - descriptive of what it does. It now returns an array instead of - updating the window directly. This has the benefit of making the - code more efficient since the text the function returns is used a - little differently in the two places the function is called. - - Other minor simplifications. -7.0.12 - MAJOR Update. - This version will ONLY run with Vim version 7.0 or greater. - Dave Eggum has made some 'significant' updates to this latest - version: - - Added BufExplorerGetAltBuf() global function to be used in the - user’s rulerformat. - - Added g:bufExplorerSplitRight option. - - Added g:bufExplorerShowRelativePath option with mapping. - - Added current line highlighting. - - The split type can now be changed whether bufexplorer is opened - in split mode or not. - - Various major and minor bug fixes and speed improvements. - - Sort by extension. - Other improvements/changes: - - Changed the help key from '?' to to be more 'standard'. - - Fixed splitting of vertical bufexplorer window. - Hopefully I have not forgot something :) -7.0.11 - Fixed a couple of highlighting bugs, reported by David Eggum. He also - changed passive voice to active on a couple of warning messages. -7.0.10 - Fixed bug report by Xiangjiang Ma. If the 'ssl' option is set, - the slash character used when displaying the path was incorrect. -7.0.9 - Martin Grenfell found and eliminated an annoying bug in the - bufexplorer/winmanager integration. The bug was were an - annoying message would be displayed when a window was split or - a new file was opened in a new window. Thanks Martin! -7.0.8 - Thanks to Mike Li for catching a bug in the WinManager integration. - The bug was related to the incorrect displaying of the buffer - explorer's window title. -7.0.7 - Thanks to Jeremy Cowgar for adding a new enhancement. This - enhancement allows the user to press 'S', that is capital S, which - will open the buffer under the cursor in a newly created split - window. -7.0.6 - Thanks to Larry Zhang for finding a bug in the "split" buffer code. - If you force set g:bufExplorerSplitType='v' in your vimrc, and if you - tried to do a \bs to split the bufexplorer window, it would always - split horizontal, not vertical. He also found that I had a typeo in - that the variable g:bufExplorerSplitVertSize was all lower case in - the documentation which was incorrect. -7.0.5 - Thanks to Mun Johl for pointing out a bug that if a buffer was - modified, the '+' was not showing up correctly. -7.0.4 - Fixed a problem discovered first by Xiangjiang Ma. Well since I've - been using vim 7.0 and not 6.3, I started using a function (getftype) - that is not in 6.3. So for backward compatibility, I conditionaly use - this function now. Thus, the g:bufExplorerShowDirectories feature is - only available when using vim 7.0 and above. -7.0.3 - Thanks to Erwin Waterlander for finding a problem when the last - buffer was deleted. This issue got me to rewrite the buffer display - logic (which I've wanted to do for sometime now). - Also great thanks to Dave Eggum for coming up with idea for - g:bufExplorerShowDirectories. Read the above information about this - feature. -7.0.2 - Thanks to Thomas Arendsen Hein for finding a problem when a user - has the default help turned off and then brought up the explorer. An - E493 would be displayed. -7.0.1 - Thanks to Erwin Waterlander for finding a couple problems. - The first problem allowed a modified buffer to be deleted. Opps! The - second problem occurred when several files were opened, BufExplorer - was started, the current buffer was deleted using the 'd' option, and - then BufExplorer was exited. The deleted buffer was still visible - while it is not in the buffers list. Opps again! -7.0.0 - Thanks to Shankar R. for suggesting to add the ability to set - the fixed width (g:bufExplorerSplitVertSize) of a new window - when opening bufexplorer vertically and fixed height - (g:bufExplorerSplitHorzSize) of a new window when opening - bufexplorer horizontally. By default, the windows are normally - split to use half the existing width or height. -6.3.0 - Added keepjumps so that the jumps list would not get cluttered with - bufexplorer related stuff. -6.2.3 - Thanks to Jay Logan for finding a bug in the vertical split position - of the code. When selecting that the window was to be split - vertically by doing a '\bv', from then on, all splits, i.e. '\bs', - were split vertically, even though g:bufExplorerSplitType was not set - to 'v'. -6.2.2 - Thanks to Patrik Modesto for adding a small improvement. For some - reason his bufexplorer window was always showing up folded. He added - 'setlocal nofoldenable' and it was fixed. -6.2.1 - Thanks goes out to Takashi Matsuo for added the 'fullPath' sorting - logic and option. -6.2.0 - Thanks goes out to Simon Johann-Ganter for spotting and fixing a - problem in that the last search pattern is overridden by the search - pattern for blank lines. -6.1.6 - Thanks to Artem Chuprina for finding a pesky bug that has been around - for sometime now. The key mapping was causing the buffer - explored to close prematurely when vim was run in an xterm. The - key mapping is now removed. -6.1.5 - Thanks to Khorev Sergey. Added option to show default help or not. -6.1.4 - Thanks goes out to Valery Kondakoff for suggesting the addition of - setlocal nonumber and foldcolumn=0. This allows for line numbering - and folding to be turned off temporarily while in the explorer. -6.1.3 - Added folding. Did some code cleanup. Added the ability to force the - newly split window to be temporarily vertical, which was suggested by - Thomas Glanzmann. -6.1.2 - Now pressing the key will quit, just like 'q'. - Added folds to hide winmanager configuration. - If anyone had the 'C' option in their cpoptions they would receive - a E10 error on startup of BufExplorer. cpo is now saved, updated and - restored. Thanks to Charles E Campbell, Jr. - Attempted to make sure there can only be one BufExplorer window open - at a time. -6.1.1 - Thanks to Brian D. Goodwin for adding toupper to FileNameCmp. This - way buffers sorted by name will be in the correct order regardless of - case. -6.0.16 - Thanks to Andre Pang for the original patch/idea to get bufexplorer - to work in insertmode/modeless mode (evim). Added Initialize - and Cleanup autocommands to handle commands that need to be - performed when starting or leaving bufexplorer. -6.0.15 - Srinath Avadhanulax added a patch for winmanager.vim. -6.0.14 - Fix a few more bug that I thought I already had fixed. Thanks - to Eric Bloodworth for adding 'Open Mode/Edit in Place'. Added - vertical splitting. -6.0.13 - Thanks to Charles E Campbell, Jr. for pointing out some embarrassing - typos that I had in the documentation. I guess I need to run - the spell checker more :o) -6.0.12 - Thanks to Madoka Machitani, for the tip on adding the augroup command - around the MRUList autocommands. -6.0.11 - Fixed bug report by Xiangjiang Ma. '"=' was being added to the - search history which messed up hlsearch. -6.0.10 - Added the necessary hooks so that the Srinath Avadhanula's - winmanager.vim script could more easily integrate with this script. - Tried to improve performance. -6.0.9 - Added MRU (Most Recently Used) sort ordering. -6.0.8 - Was not resetting the showcmd command correctly. - Added nifty help file. -6.0.7 - Thanks to Brett Carlane for some great enhancements. Some are added, - some are not, yet. Added highlighting of current and alternate - filenames. Added splitting of path/filename toggle. Reworked - ShowBuffers(). - Changed my email address. -6.0.6 - Copyright notice added. Needed this so that it could be distributed - with Debian Linux. Fixed problem with the SortListing() function - failing when there was only one buffer to display. -6.0.5 - Fixed problems reported by David Pascoe, in that you where unable to - hit 'd' on a buffer that belonged to a files that no longer existed - and that the 'yank' buffer was being overridden by the help text when - the bufexplorer was opened. -6.0.4 - Thanks to Charles Campbell, Jr. for making this plugin more plugin - *compliant*, adding default keymappings of be and bs - as well as fixing the 'w:sortDirLabel not being defined' bug. -6.0.3 - Added sorting capabilities. Sort taken from explorer.vim. -6.0.2 - Can't remember. (2001-07-25) -6.0.1 - Initial release. - -=============================================================================== -TODO *bufexplorer-todo* - -- Nothing as of now, buf if you have any suggestions, drop me an email. - -=============================================================================== -CREDITS *bufexplorer-credits* - -Author: Jeff Lanzarotta - -Credit must go out to Bram Moolenaar and all the Vim developers for -making the world's best editor (IMHO). I also want to thank everyone who -helped and gave me suggestions. I wouldn't want to leave anyone out so I -won't list names. - -=============================================================================== -vim:tw=78:noet:wrap:ts=8:ft=help:norl: diff --git a/modules/vim/vim.dot.link/doc/git-vim.txt b/modules/vim/vim.dot.link/doc/git-vim.txt deleted file mode 100644 index 5fba807..0000000 --- a/modules/vim/vim.dot.link/doc/git-vim.txt +++ /dev/null @@ -1,95 +0,0 @@ -*git-vim.txt* Git Bindings for Vim - -============================================================================== -CONTENTS *git-vim-contents* - - 1. Introduction.............................|git-vim| - 2. Commands.................................|git-vim-commands| - 3. Keymaps..................................|git-vim-keymaps| - 4. License..................................|git-vim-license| - -============================================================================== -1. Introduction *git-vim* - -Git-vim provides: - -* Plugin files for calling git functions from inside Vim -* Syntax files for git displays - -============================================================================== -2. Commands *git-vim-commands* - -:GitAdd - git-add or current file if not specified. - -:GitCommit - git-commit. - -:GitStatus - Show git-status of current file or repository. - -:GitLog - Show git-log of current file or repository. - -:GitCheckout - git-checkout. Completes git commits. - -:GitDiff - git-diff. Completes git commits. - -:GitPull - git-pull. - -:GitPullRebase - git-pull —rebase. - -:GitPush - git-push. Defaults to +git push origin +. - -:GitCatFile - git-cat-file. - -:Git - Does any git command. - -:GitVimDiffMerge - Experimental. Call this command on unmerged file to enter vimdiff mode. - -:GitVimDiffMergeDone - Call this command after merging. - -============================================================================== -3. Keymaps *git-vim-keymaps* - -gd - :GitDiff - -gD - :GitDiff —cached - -gs - :GitStatus - -gl - :GitLog - -ga - :GitAdd - -gA - :GitAdd - -gc - :GitCommit - -In the git-status buffer: - - - :GitAdd - -============================================================================== -4. License *git-vim-license* - -The MIT License - - vim:tw=78:ts=8:ft=help diff --git a/modules/vim/vim.dot.link/doc/indexer.txt b/modules/vim/vim.dot.link/doc/indexer.txt deleted file mode 100644 index 330b486..0000000 --- a/modules/vim/vim.dot.link/doc/indexer.txt +++ /dev/null @@ -1,211 +0,0 @@ -*indexer.txt* Plugin for automatically index project files using ctags - For Vim 7.x version - - - - By Dmitry Frank - dimon.frank email-at-sign gmail.com - - - *indexer* *indexer-plugin* - Contents: - - Options.....................|indexer-options| - Commands...................|indexer-commands| - -You can use this plugin to automatically index your project files -using ctags. This can be very useful when it's used together with plugins -omnicppcomplete (for c, c++ development), code_complete.vim -and other plugins that using tags. -You also will able to jump from function call to its definition -just by pressing Ctrl-] or g] - -This plugin can work as add-on for project.tar.gz plugin. -Indexer reads project file, parses it and builds tags for all files -in project. But it can also work without this plugin. - -Actually, if you using project.vim plugin and you projects file is -default (~/.vimprojects), then setting indexer up is very easily: -you can just copy indexer.vim to your plugins directory, start Vim -and open any file from your project. -The indexer plugin will detect that opened file from project -and automatically start ctags for each file in this project. -It also set &path and &tags options for Vim. - -If you are using project.vim but you have another projects file, -you should set option g:indexer_projectsSettingsFilename in your -vimrc. See |indexer-options| for details - -If you don't use project.vim then you can use ".indexer_files" to -define projects to index. -Default location of this file is "~/.indexer_files". You can change -it by modifying variable g:indexer_indexerListFilename - -Note that this file overrides "~/.vimprojects". If both files exists -only "~/.indexer_files" will be used. - -Syntax of this file is very easy. Propably the best way to explain it -is show an example. - -Example file "~/.indexer_files" > - [CoolProject] - - /home/user/myproject/src/*.c - /home/user/myproject/src/*.h - /home/user/myproject/inc/*.h - - [AnotherProject] - - /home/user/myproject2**/*.c - /home/user/myproject2**/*.h - - -I think, there's all obvious: -there's two projects: CoolProject and AnotherProject. -in CoolProject there's all *.c files in "myproject/src" and all header -files in "myproject/inc". in AnotherProject there's both *.c and *.h -files in "myproject2" and all subdirectories recursively. -( "**" means recursively ) -It's able to use environment variables in your paths. - -You can define the same AnotherProject simplier: - > - [AnotherProject] - - /home/user/myproject2**/*.[ch] - -And, finally, it can autodetect project root. So, you can move your -project to another place in filesystem, and all files will indexed anyway. -More detailed see in options, variable "g:indexer_lookForProjectDir". - -======================================================================== -OPTIONS *indexer-options* - -You can set these variables in your vimrc file before the plugin is loaded to -change its default behavior - -g:indexer_lookForProjectDir (default: 1) - - if on, then plugin will recursively-up search for ".vimprj" directory. - If it will be found, then plugin will source all "*.vim" files in it, - and also will set environment variable $INDEXER_PROJECT_ROOT to - directory in which is ".vimprj" directory. - - Your directory tree example: - - | home - | | user - | | | myproject - | | | | src - | | | | |-file1.c - | | | | |-file2.c - | | | | |-file3.c - | | | | | - | | | | inc - | | | | |-file1.h - | | | | |-file2.h - | | | | |-file3.h - | | | | | - | | | | .vimprj - | | | | |-conf.vim - - For example, you typing: > - $ gvim /home/user/myproject/src/file1.c ----- - - Then indexer will detect your /home/user/myproject/.vimprj directory - and source all files *.vim from it, - and set $INDEXER_PROJECT_ROOT="/home/user/myproject" - - so, you can define any settings that are individual for - your project, such as another .vimprojects file, or any other. - - This is great for people like me, that likes when ALL project files - is in only one directory. - - When i need to copy project to another computer i just copying the - whole folder, and all is done. I using $INDEXER_PROJECT_ROOT variable - in my .vimprojects file, so that i can put project in any place in - filesystem, and all files will be indexed, because - $INDEXER_PROJECT_ROOT will be always my real project root. - -g:indexer_dirNameForSearch (default: ".vimprj") - - directory name with project settings for search (".vimprj" by default) - -g:indexer_recurseUpCount (default: 10) - - count of recurse-up for search ".vimprj" directory - -g:indexer_indexerListFilename (default: "~/.indexer_files") - - indexer filename. If this file exists then projects file are ignored. - -g:indexer_projectsSettingsFilename (default: "~/.vimprojects") - - project filename. (the project file that plugin project.vim using) - -g:indexer_projectName (default: '') - - if you don't wand to index any project, you can define one name. - If it is empty, then indexes any found projects. - By default is empty. - -g:indexer_enableWhenProjectDirFound (default: 1) - - If this option is set, then if gvim started from project directory, this project - will be indexed. Otherwise project will be indexed only if there's file - from this project opened - -g:indexer_tagsDirname (default: "~/.vimtags") - - directory to save tags file. (this is directory because there's propably - several files in next versions) - - Note: If ".vimprj" directory is found, then this option is ignored and tags - directory becomes ".vimprj/tags" - -g:indexer_ctagsCommandLineOptions - - ctags command line options. By default is: - "--c++-kinds=+p+l --fields=+iaS --extra=+q" - -g:indexer_ctagsJustAppendTagsAtFileSave (default: 1) - - when there's project file saving, we need to update tags. - If this option is on, then ctags will be started just for - current file with "-a" key, otherwise tags for all project - files will be rebuild. - - There is different sides: - If just append tags, then old tags will not be removed until - you rebuild all tags by typing ":IndexerRebuild" or just restart - Vim. If rebuild tags every time, it would take long time - (depending on project size, of course) - - By default this option is on. - -======================================================================== -COMMANDS *indexer-commands* - -:IndexerInfo - - prints information about current state of plugin, such as projects file - using, files not found, and other. - - The first thing you should do if plugin doesn't work is type this command :) - -:IndexerFiles - - prints list of indexed files - -:IndexerRebuild - - rebuild tags for all files in project - -:IndexerFilesAvail - - prints list of all available files that has been read from projects file - - - vim:ft=help:tw=78: diff --git a/modules/vim/vim.dot.link/doc/project.txt b/modules/vim/vim.dot.link/doc/project.txt deleted file mode 100644 index 8f85c23..0000000 --- a/modules/vim/vim.dot.link/doc/project.txt +++ /dev/null @@ -1,710 +0,0 @@ -*project.txt* Plugin for managing multiple projects with multiple sources - For Vim version 6.x and Vim version 7.x. - Last Change: Fri 13 Oct 2006 10:20:13 AM EDT - - - By Aric Blumer - aricvim email-at-sign charter.net - - *project* *project-plugin* - Contents: - - Commands...................|project-invoking| - Inheritance.............|project-inheritance| - Mappings...................|project-mappings| - Adding Mappings.....|project-adding-mappings| - Settings...................|project-settings| - Example File................|project-example| - Tips...........................|project-tips| - - -You can use this plugin's basic functionality to set up a list of -frequently-accessed files for easy navigation. The list of files will be -displayed in a window on the left side of the Vim window, and you can press - or double-click on filenames in the list to open the files. I find -this easier to use than having to navigate a directory hierarchy with the -|file-explorer|. - -You can also instruct the Plugin to change to a directory and to run Vim -scripts when you select a file. These scripts can, for example, modify the -environment to include compilers in $PATH. This makes it very easy to use -quickfix with multiple projects that use different environments. - -Other features include: - o Loading/Unloading all the files in a Project (\l, \L, \w, and \W) - o Grepping all the files in a Project (\g and \G) - o Running a user-specified script on a file (can be used to launch an - external program on the file) (\1 through \9) - o Running a user-specified script on all the files in a Project - (\f1-\f9 and \F1-\F9) - o High degree of user-configurability - o Also works with |netrw| using the XXXX://... notation where XXXX is - ftp, rcp, scp, or http. - -All of this is specified within a simple text file and a few global variables -in your vimrc file. - -You must set 'nocompatible' in your |vimrc| file to use this plugin. You can -stop the plugin from being loaded by setting the "loaded_project" variable: > - :let loaded_project = 1 - - -============================================================================== -COMMANDS *project-invoking* - -You can use the plugin by placing it in your plugin directory (e.g., -~/.vim/plugin). See |add-global-plugin|. When you start vim the next time, you -then enter the command > - :Project -or > - :Project {file} - -If you do not specify the filename, $HOME/.vimprojects is used. - -To have Vim come up with the Project Window enabled automatically (say, from a -GUI launcher), run Vim like this: [g]vim +Project - -Note that you can invoke :Project on only one file at a time. If you wish to -change the Project File, do a :bwipe in the Project Buffer, then re-invoke the -Plugin as described above. - -Several Projects can be kept and displayed in the same file, each in a fold -delimited by { and } (see |fold.txt|). There can be any number of nested -folds to provide you with a Project hierarchy. Any line without a { or a } in -the file is considered to be a filename. Blank lines are ignored, and any -text after a # is ignored. - -Because the plugin uses standard Vim folds, you can use any of the -|fold-commands|. You can double-click on the first line of a fold to open and -close it. You can select a file to open by putting the cursor on its name and -pressing or by double-clicking on it. The plugin will create a new -window to the right or use the |CTRL-W_p| equivalent if it exists. - - *project-syntax* -Each Project Entry has this form: - -project_entry ::= - ={projpath} [{options}] { - [ filename ] - [ project_entry ] - } - -{options} is one or more of the following (on the same line): - CD={path} - in={filename} - out={filename} - filter="{pat}" - flags={flag} - -Note that a project_entry can reside within a project_entry. This allows you -to set up a hierarchy within your Project. - -The will be displayed in the foldtext and cannot contain "=". -There can be no space character directly on either side of the =. - -The {projpath} is the path in which the files listed in the Project's fold -will be found, and it may contain environment variables. If the path is a -relative path, then the plugin constructs the whole path from the Project's -parent, grandparent, etc., all the way up the hierarchy. An outermost -project_entry must have an absolute path. See the |project-inheritance| -example below. {projpath} may contain spaces, but they must be escaped like -normal Vim escapes. Here are two examples of the same directory: -> - Example=/my/directory/with\ spaces { - } - Example="/my/directory/with spaces" { - } - -I recommend this for Windows®: > - - Example="c:\My Documents" { - } - -But Vim is smart enough to do this, too: > - - Example=c:\My\ Documents { - } - -CD= provides the directory that Vim will change to when you select a file in -that fold (using |:cd|). This allows you, for example, to enter |:make| to use -the local Makefile. A CD=. means that Vim will make {projpath} or its -inherited equivalent the current working directory. When CD is omitted, the -directory is not changed. There can be no space on either side of the =. The -value of CD can also be a relative path from a parent's CD. See the -|project-inheritance| example below. This directive is ignored for |netrw| -projects. Spaces are allowed in the path as for {projpath}. - -in= and out= provide the means to run arbitrary Vim scripts whenever you enter -or leave a file's buffer (see the |BufEnter| and |BufLeave| autocommand -events). The idea is to have a Vim script that sets up or tears down the -environment for the Project like this: - -in.vim: > - let $PROJECT_HOME='~/my_project' - " Put the compiler in $PATH - if $PATH !~ '/path/to/my/compiler' - let $PATH=$PATH.':/path/to/my/compiler' - endif - -out.vim: > - " Remove compiler from $PATH - if $PATH =~ '/path/to/my/compiler' - let $PATH=substitute($PATH, ':/path/to/my/compiler', '', 'g') - endif - -Then you can use :make with the proper environment depending on what file you -are currently editing. If the path to the script is relative, then it is -relative from {projpath}. These directives are inherited by Subprojects -unless the Subproject specifies its own. For use with |netrw| projects, the -paths specified for in= and out= must be absolute and local. - -filter= specifies a |glob()| file pattern. It is used to regenerate the list -of files in a Project fold when using the \r (r) map in the -Project Window. The filter value must be in quotes because it can contain -multiple file patterns. If filter is omitted, then the * pattern is used. -There can be no space on either side of the =. A Subproject will inherit the -filter of its parent unless it specifies its own filter. - -flags= provides the means to enable/disable features for a particular fold. -The general mnemonic scheme is for lower case to turn something off and upper -case to turn something on. {flag} can contain any of the following -characters: - - flag Description ~ - - l Turn off recursion for this fold for \L. Subfolds are also - blocked from the recursion. - - r Turn off refresh. When present, do not refresh this fold when - \r or \R is used. This does not affect subfold recursion. - - S Turn on sorting for refresh and create. - - s Turn off sorting for refresh and create. - - T Turn on top gravity. Forces folds to the top of the current - fold when refreshing. It has the same affect as the 'T' flag - in g:proj_flags, but controls the feature on a per-fold basis. - - t Turn off top gravity. Forces folds to the bottom of the - current fold when refreshing. - - w Turn off recursion for this fold for \W. Subfolds are also - blocked from the recursion. - - -Flags are not inherited by Subprojects. - -Any text outside a fold is ignored. - - -============================================================================== -INHERITANCE *project-inheritance* - -It's best to show inheritance by comparing these two Project Files: -> - Parent=~/my_project CD=. filter="Make* *.mk" flags=r { - Child1=c_code { - } - Child2=include CD=. filter="*.h" { - } - } - -Child1's path is "~/my_project/c_code" because ~/my_project is inherited. It -also inherits the CD from Parent. Since Parent has CD=., the Parent's cwd is -"~/my_project". Child1 therefore inherits a CD of "~/my_project". Finally, -Child1 inherits the filter from Parent. The flags are not inherited. - -Child2 only inherits the "~/my_project" from Parent. - -Thus, the example above is exactly equivalent to this: -> - Parent=~/my_project CD=. filter="Make* *.mk" flags=r { - Child1=~/my_project/c_code CD=~/my_project filter="Make* *.mk" { - } - Child2=~/my_project/include CD=~/my_project/include filter="*.h" { - } - } - -(For a real Project, Child1 would not want to inherit its parent's filter, but -this example shows the concept.) You can always enter \i to display what the -cursor's project inherits. - - -============================================================================== -MAPPINGS *project-mappings* - -Map Action ~ - -\r Refreshes the Project fold that the cursor is in by placing in the - fold all the files that match the filter. The Project is refreshed - using an indent of one space for every foldlevel in the hierarchy. - - You may place a "# pragma keep" (without the quotes) at the end of a - line, and the file entry on that line will not be removed when you - refresh. This is useful, for example, when you have . as an entry so - you can easily browse the directory. - - Note that this mapping is actually r, and the default of - || is \. - - This does not work for Projects using |netrw|. - -\R Executes \r recursively in the current fold and all folds below. - This does not work for Projects using |netrw|. - -\c Creates a Project fold entry. It asks for the description, the path - to the files, the CD parameter, and the filename |glob()| pattern. - From this information, it will create the Project Entry below the - cursor. - - This does not work for Projects using |netrw|. - -\C Creates a Project fold entry like \c, but recursively includes all the - subdirectories. - - - Select a file to open in the |CTRL-W_p| window or in a new window. If - the cursor is on a fold, open or close it. - - -\s - Same as but horizontally split the target window. - s is provided for those terminals that don't recognize - . - -\S - Load all files in a project by doing horizontal splits. - - -\o - Same as but ensure that the opened file is the only other - window. o is provided for those terminals that don't - recognize . - - -\v - Same as but only display the file--the cursor stays in the - Project Window. - -<2-LeftMouse> - (Double-click) If on a closed fold, open it. If on an open fold - boundary, close it. If on a filename, open the file in the |CTRL-W_p| - window or in a new window. - - - Same as . - - - Same as . - - - Increase the width of the Project Window by g:proj_window_increment or - toggle between a width of - g:proj_window_width + g:proj_window_increment - and - g:proj_window_width. - - Whether you toggle or monotonically increase the width is determined - by the 't' flag of the g:proj_flags variable (see |project-flags|). - - Note that a Right Mouse click will not automatically place the cursor - in the Project Window if it is in a different window. The window will - go back to the g:proj_window_width width when you leave the window. - - Same as - - -\ - Move the text or fold under the cursor up one row. This may not work - in a terminal because the terminal is unaware of this key combination. - is provided for those terminals that don't recognize - . - - - -\ - Move the text or fold under the cursor down one row. This may not work - in a terminal because the terminal is unaware of this key combination. - is provided for those terminals that don't - recognize . - -\i Show in the status line the completely resolved and inherited - parameters for the fold the cursor is in. This is intended for - debugging your relative path and inherited parameters for manually - entered Projects. - -\I Show in the status line the completely resolved filename. Uses the - Project_GetFname(line('.')) function. - -\1 - \9 - Run the command specified in g:proj_run{x} where {x} is the number - of the key. See the documentation of g:proj_run1 below. - -\f1-\f9 - Run the command specified in g:proj_run_fold{x} where {x} is the - number of the key. The command is run on the files at the current - Project level. See the |project-settings| below. - -\F1-\F9 - Run the command specified in g:proj_run_fold{x} where {x} is the - number of the key. The command is run on the files at the current - Project level and all Subprojects. See the |project-settings| below. - -\0 Display the commands that are defined for \1 through \9. - -\f0 Display the commands that are defined for \f1 through \f9 and \F1 - through \F0. Same as \F0. - -\l Load all the files in the current Project level into Vim. While files - are being loaded, you may press any key to stop. - -\L Load all the files in the current Project and all Subprojects into - Vim. Use this mapping with caution--I wouldn't suggest using \L to - load a Project with thousands of files. (BTW, my Project file has more - than 5,300 files in it!) While files are being loaded, you may press - any key to stop. - -\w Wipe all the files in the current Project level from Vim. (If files - are modified, they will be saved first.) While files are being wiped, - you may press any key to stop. - -\W Wipe all the files in the current Project and all Subprojects from - Vim. (If files are modified, they will be saved first.) While files - are being wiped, you may press any key to stop. - -\g Grep all the files in the current Project level. - -\G Grep all the files in the current Project level and all Subprojects. - -\e Set up the Environment for the Project File as though you had selected - it with . This allows you to do a \e and a :make without - having to open any files in the project. - -\E Explore (using |file-explorer|) the directory of the project the - cursor is in. Does not work with netrw. - - When the 'g' flag is present in g:proj_flags (see |project-flags|) - this key toggles the Project Window open and closed. You may remap - this toggle function by putting the following in your vimrc and - replacing P with whatever key combination you wish: - - nmap P ToggleProject - -Note that the Project Plugin remaps :help because the Help Window and the -Project Window get into a fight over placement. The mapping avoids the -problem. - -============================================================================== -ADDING MAPPINGS *project-adding-mappings* - -You can add your own mappings or change the mappings of the plugin by placing -them in the file $HOME/.vimproject_mappings. This file, if it exists, will be -sourced when the plugin in loaded. Here is an example that will count the -number of entries in a project when you press \K (Kount, C is taken :-): > - - function! s:Wc() - let b:loadcount=0 - function! SpawnExec(infoline, fname, lineno, data) - let b:loadcount = b:loadcount + 1 - if getchar(0) != 0 | let b:stop_everything=1 | endif - endfunction - call Project_ForEach(1, line('.'), "*SpawnExec", 0, '') - delfunction SpawnExec - echon b:loadcount." Files\r" - unlet b:loadcount - if exists("b:stop_everything") - unlet b:stop_everything - echon "Aborted.\r" - endif - endfunction - - nnoremap K :call Wc() - -Here's another example of how I integrated the use of perforce with the plugin -in my $HOME/.vimproject_mappings: -> - function! s:DoP4(cmd) - let name=Project_GetFname(line('.')) - let dir=substitute(name, '\(.*\)/.*', '\1', 'g') - exec 'cd '.dir - exec "!".a:cmd.' '.Project_GetFname(line('.')) - cd - - endfunction - - nmap \pa :call DoP4("p4add") - nmap \pe :call DoP4("p4edit") -< -(Note that I CD to the directory the file is in so I can pick of the $P4CONFIG -file. See the perforce documentation.) - -This creates the mappings \pe to check out the file for edit and \pa to add -the file to the depot. - -Here is another example where I remap the mapping to use an external -program to launch a special kind of file (in this case, it launches ee to view -a jpg file). It is a bit contrived, but it works. -> - let s:sid = substitute(maparg('', 'n'), '.*\(.\{-}\)_.*', '\1', '') - function! s:LaunchOrWhat() - let fname=Project_GetFname(line('.')) - if fname =~ '\.jpg$' - exec 'silent! !ee "'.fname.'"&' - else - call {s:sid}_DoFoldOrOpenEntry('', 'e') - endif - endfunction - nnoremap \|:call LaunchOrWhat() -< -If the file ends in .jpg, the external program is launched, otherwise the -original mapping of is run. - -============================================================================== -SETTINGS *project-settings* - -You can set these variables in your vimrc file before the plugin is loaded to -change its default behavior - -g:proj_window_width - The width of the Project Window that the plugin attempts to maintain. - Default: 24 - - The Project Plugin is not always successful in keeping the window - where I want it with the size specified here, but it does a decent - job. - -g:proj_window_increment - The increment by which to increase the width of the Project Window - when pressing or clicking the . Default: 100 - (See |project-mappings|.) - - *project-flags* -g:proj_flags - Default: "imst" - Various flags to control the behavior of the Project Plugin. This - variable can contain any of the following character flags. - - flag Description ~ - - b When present, use the |browse()| when selecting directories - for \c and \C. This is off by default for Windows, because - the windows browser does not allow you to select directories. - - c When present, the Project Window will automatically close when - you select a file. - - F Float the Project Window. That is, turn off automatic - resizing and placement. This allows placement between other - windows that wish to share similar placement at the side of - the screen. It is also particularly helpful for external - window managers. - - g When present, the mapping for will be created to toggle - the Project Window open and closed. - - i When present, display the filename and the current working - directory in the command line when a file is selected for - opening. - - l When present, the Project Plugin will use the |:lcd| command - rather than |:cd| to change directories when you select a file - to open. This flag is really obsolete and not of much use - because of L below. - - L Similar to l, but install a BufEnter/Leave |:autocommand| to - ensure that the current working directory is changed to the - one specified in the fold CD specification whenever that - buffer is active. (|:lcd| only changes the CWD for a window, - not a buffer.) - - m Turn on mapping of the |CTRL-W_o| and |CTRL-W_CTRL_O| normal - mode commands to make the current buffer the only visible - buffer, but keep the Project Window visible, too. - - n When present, numbers will be turned on for the project - window. - - s When present, the Project Plugin will use syntax highlighting - in the Project Window. - - S Turn on sorting for refresh and create. - - t When present, toggle the size of the window rather than just - increase the size when pressing or right-clicking. - See the entry for in |project-mappings|. - - T When present, put Subproject folds at the top of the fold when - refreshing. - - v When present, use :vimgrep rather than :grep when using \G. - -g:proj_run1 ... g:proj_run9 - Contains a Vim command to execute on the file. See the - mappings of \1 to \9 above. - - %f is replaced with the full path and filename - %F is replaced with the full path and filename with spaces - quoted - %n is replaced with the filename alone - %N is replaced with the filename alone with spaces quoted - %h is replaced with the home directory - %H is replaced with the home directory with spaces quoted - %r is replaced with the directory relative to the CD path - %R is replaced with the directory relative to the CD path - with spaces quoted - %d is replaced with the CD directory. - %D is replaced with the CD directory.with spaces quoted - %% is replaced with a single % that is not used in - expansion. - - (Deprecated: %s is also replaced with the full path and - filename for backward compatibility.) - - For example, gvim will be launched on the file under the - cursor when you enter \3 if the following is in your vimrc - file: > - let g:proj_run3='silent !gvim %f' -< Here are a few other examples: > - let g:proj_run1='!p4 edit %f' - let g:proj_run2='!p4 add %f' - let g:proj_run4="echo 'Viewing %f'|sil !xterm -e less %f &" -< - On Windows systems you will want to put the %f, %h, and %d in - single quotes to avoid \ escaping. - -g:proj_run_fold1 ... g:proj_run_fold9 - Contains a Vim command to execute on the files in a fold. See - the mappings of \f1 to \f9 and \F1 to \F9 above. - - %f is the filename, %h is replaced with the project home - directory, and %d is replaced with the CD directory. Multiple - filenames can be handled in two ways: - - The first (default) way is to have %f replaced with all the - absolute filenames, and the command is run once. The second - is to have the command run for each of the non-absolute - filenames (%f is replaced with one filename at a time). To - select the second behavior, put an '*' character at the - beginning of the g:proj_run_fold{x} variable. (The '*' is - stripped before the command is run.) - - For example, note the difference between the following: > - let g:proj_run_fold3="*echo '%h/%f'" - let g:proj_run_fold4="echo '%f'" -< - Note that on Windows systems, you will want the %f, %h, and %c - within single quotes, or the \ in the paths will cause - problems. The alternative is to put them in |escape()|. - - -============================================================================== -PROJECT EXAMPLE FILE *project-example* - -Here is an example ~/.vimprojects file: > - - 1 My Project=~/c/project CD=. in=in.vim out=out.vim flags=r { - 2 Makefile - 3 in.vim - 4 out.vim - 5 GUI Files=. filter="gui*.c gui*.h" { - 6 gui_window.c - 7 gui_dialog.c - 8 gui_list.c - 9 gui.h # Header file - 10 } - 11 Database Files=. filter="data*.c data*.h" { - 12 data_read.c - 13 data_write.c - 14 data.h - 15 } - 16 OS-Specific Files { - 17 Win32=. filter="os_win32*.c os_win32*.h" { - 18 os_win32_gui.c - 19 os_win32_io.c - 20 } - 21 Unix=. filter="os_unix*.c os_unix*.h" { - 22 os_unix_gui.c - 23 os_unix_io.c - 24 } - 25 } - 26 } - -(Don't type in the line numbers, of course.) - - -============================================================================== -TIPS ON USING PROJECT PLUGIN *project-tips* - -1. You can create a Project Entry by entering this: > - - Label=~/wherever CD=. filter="*.c *.h" { - } -< - Then you can put the cursor in the fold and press \r. The script will fill - in the files (C files in this case) from this directory for you. This is - equivalent to \c without any dialogs. - -2. You can edit the Project File at any time to add, remove, or reorder files - in the Project list. - -3. If the Project Window ever gets closed, you can just enter > - :Project -< to bring it back again. (You don't need to give it the filename; the - plugin remembers.) - - If you have the 'm' flag set in g:proj_flags, then you get the Project - Window to show up again by pressing |CTRL-W_o|. This, of course, will - close any other windows that may be open that the cursor is not in. - -4. Adding files to a Project is very easy. To add, for example, the 'more.c' - file to the Project, just insert the filename in the Project Entry then - hit on it. - -5. When |quickfix| loads files, it is not equivalent to pressing on - a filename, so the directory will not be changed and the scripts will not - be run. (If I could make this otherwise, I would.) The solution is to use - the \L key to load all of the files in the Project before running - quickfix. - -6. If the Project window gets a bit cluttered with folds partially - open/closed, you can press |zM| to close everything and tidy it up. - -7. For advanced users, I am exporting the function Project_GetAllFnames() - which returns all the filenames within a fold and optionally all its - Subprojects. Also, I export Project_ForEach() for running a function for - each filename in the project. See the code for examples on how to use - these. Finally, I export Project_GetFname(line_number) so that you can - write your own mappings and get the filename for it. - -8. Some people have asked how to do a global mapping to take the cursor to - the Project window. One of my goals for the plugin is for it to be as - self-contained as possible, so I'm not going to add it by default. But you - can put this in your vimrc: -> - nmap P :Project - -< -9. You can put the . entry in a project, and it will launch the - |file-explorer| plugin on the directory. To avoid removal when you - refresh, make the entry look like this: -> - . # pragma keep -< -============================================================================== -THANKS - - The following people have sent me patches to help with the Project - Plugin development: - - Tomas Zellerin - Lawrence Kesteloot - Dave Eggum - A Harrison - Thomas Link - Richard Bair - Eric Arnold - Peter Jones - Eric Van Dewoestine - - - vim:ts=8 sw=8 noexpandtab tw=78 ft=help: diff --git a/modules/vim/vim.dot.link/doc/snipMate.txt b/modules/vim/vim.dot.link/doc/snipMate.txt deleted file mode 100644 index 704d44a..0000000 --- a/modules/vim/vim.dot.link/doc/snipMate.txt +++ /dev/null @@ -1,286 +0,0 @@ -*snipMate.txt* Plugin for using TextMate-style snippets in Vim. - -snipMate *snippet* *snippets* *snipMate* -Last Change: July 13, 2009 - -|snipMate-description| Description -|snipMate-syntax| Snippet syntax -|snipMate-usage| Usage -|snipMate-settings| Settings -|snipMate-features| Features -|snipMate-disadvantages| Disadvantages to TextMate -|snipMate-contact| Contact - -For Vim version 7.0 or later. -This plugin only works if 'compatible' is not set. -{Vi does not have any of these features.} - -============================================================================== -DESCRIPTION *snipMate-description* - -snipMate.vim implements some of TextMate's snippets features in Vim. A -snippet is a piece of often-typed text that you can insert into your -document using a trigger word followed by a . - -For instance, in a C file using the default installation of snipMate.vim, if -you type "for" in insert mode, it will expand a typical for loop in C: > - - for (i = 0; i < count; i++) { - - } - - -To go to the next item in the loop, simply over to it; if there is -repeated code, such as the "i" variable in this example, you can simply -start typing once it's highlighted and all the matches specified in the -snippet will be updated. To go in reverse, use . - -============================================================================== -SYNTAX *snippet-syntax* - -Snippets can be defined in two ways. They can be in their own file, named -after their trigger in 'snippets//.snippet', or they can be -defined together in a 'snippets/.snippets' file. Note that dotted -'filetype' syntax is supported -- e.g., you can use > - - :set ft=html.eruby - -to activate snippets for both HTML and eRuby for the current file. - -The syntax for snippets in *.snippets files is the following: > - - snippet trigger - expanded text - more expanded text - -Note that the first hard tab after the snippet trigger is required, and not -expanded in the actual snippet. The syntax for *.snippet files is the same, -only without the trigger declaration and starting indentation. - -Also note that snippets must be defined using hard tabs. They can be expanded -to spaces later if desired (see |snipMate-indenting|). - -"#" is used as a line-comment character in *.snippets files; however, they can -only be used outside of a snippet declaration. E.g.: > - - # this is a correct comment - snippet trigger - expanded text - snippet another_trigger - # this isn't a comment! - expanded text -< -This should hopefully be obvious with the included syntax highlighting. - - *snipMate-${#}* -Tab stops ~ - -By default, the cursor is placed at the end of a snippet. To specify where the -cursor is to be placed next, use "${#}", where the # is the number of the tab -stop. E.g., to place the cursor first on the id of a
tag, and then allow -the user to press to go to the middle of it: - > - snippet div -
- ${2} -
-< - *snipMate-placeholders* *snipMate-${#:}* *snipMate-$#* -Placeholders ~ - -Placeholder text can be supplied using "${#:text}", where # is the number of -the tab stop. This text then can be copied throughout the snippet using "$#", -given # is the same number as used before. So, to make a C for loop: > - - snippet for - for (${2:i}; $2 < ${1:count}; $1++) { - ${4} - } - -This will cause "count" to first be selected and change if the user starts -typing. When is pressed, the "i" in ${2}'s position will be selected; -all $2 variables will default to "i" and automatically be updated if the user -starts typing. -NOTE: "$#" syntax is used only for variables, not for tab stops as in TextMate. - -Variables within variables are also possible. For instance: > - - snippet opt - - -Will, as usual, cause "option" to first be selected and update all the $1 -variables if the user starts typing. Since one of these variables is inside of -${2}, this text will then be used as a placeholder for the next tab stop, -allowing the user to change it if he wishes. - -To copy a value throughout a snippet without supplying default text, simply -use the "${#:}" construct without the text; e.g.: > - - snippet foo - ${1:}bar$1 -< *snipMate-commands* -Interpolated Vim Script ~ - -Snippets can also contain Vim script commands that are executed (via |eval()|) -when the snippet is inserted. Commands are given inside backticks (`...`); for -TextMates's functionality, use the |system()| function. E.g.: > - - snippet date - `system("date +%Y-%m-%d")` - -will insert the current date, assuming you are on a Unix system. Note that you -can also (and should) use |strftime()| for this example. - -Filename([{expr}] [, {defaultText}]) *snipMate-filename* *Filename()* - -Since the current filename is used often in snippets, a default function -has been defined for it in snipMate.vim, appropriately called Filename(). - -With no arguments, the default filename without an extension is returned; -the first argument specifies what to place before or after the filename, -and the second argument supplies the default text to be used if the file -has not been named. "$1" in the first argument is replaced with the filename; -if you only want the filename to be returned, the first argument can be left -blank. Examples: > - - snippet filename - `Filename()` - snippet filename_with_default - `Filename('', 'name')` - snippet filename_foo - `filename('$1_foo')` - -The first example returns the filename if it the file has been named, and an -empty string if it hasn't. The second returns the filename if it's been named, -and "name" if it hasn't. The third returns the filename followed by "_foo" if -it has been named, and an empty string if it hasn't. - - *multi_snip* -To specify that a snippet can have multiple matches in a *.snippets file, use -this syntax: > - - snippet trigger A description of snippet #1 - expand this text - snippet trigger A description of snippet #2 - expand THIS text! - -In this example, when "trigger" is typed, a numbered menu containing all -of the descriptions of the "trigger" will be shown; when the user presses the -corresponding number, that snippet will then be expanded. - -To create a snippet with multiple matches using *.snippet files, -simply place all the snippets in a subdirectory with the trigger name: -'snippets///.snippet'. - -============================================================================== -USAGE *snipMate-usage* - - *'snippets'* *g:snippets_dir* -Snippets are by default looked for any 'snippets' directory in your -'runtimepath'. Typically, it is located at '~/.vim/snippets/' on *nix or -'$HOME\vimfiles\snippets\' on Windows. To change that location or add another -one, change the g:snippets_dir variable in your |.vimrc| to your preferred -directory, or use the |ExtractSnips()|function. This will be used by the -|globpath()| function, and so accepts the same syntax as it (e.g., -comma-separated paths). - -ExtractSnipsFile({directory}, {filetype}) *ExtractSnipsFile()* *.snippets* - -ExtractSnipsFile() extracts the specified *.snippets file for the given -filetype. A .snippets file contains multiple snippet declarations for the -filetype. It is further explained above, in |snippet-syntax|. - -ExtractSnips({directory}, {filetype}) *ExtractSnips()* *.snippet* - -ExtractSnips() extracts *.snippet files from the specified directory and -defines them as snippets for the given filetype. The directory tree should -look like this: 'snippets//.snippet'. If the snippet has -multiple matches, it should look like this: -'snippets///.snippet' (see |multi_snip|). - - *ResetSnippets()* -The ResetSnippets() function removes all snippets from memory. This is useful -to put at the top of a snippet setup file for if you would like to |:source| -it multiple times. - - *list-snippets* *i_CTRL-R_* -If you would like to see what snippets are available, simply type -in the current buffer to show a list via |popupmenu-completion|. - -============================================================================== -SETTINGS *snipMate-settings* *g:snips_author* - -The g:snips_author string (similar to $TM_FULLNAME in TextMate) should be set -to your name; it can then be used in snippets to automatically add it. E.g.: > - - let g:snips_author = 'Hubert Farnsworth' - snippet name - `g:snips_author` -< - *snipMate-expandtab* *snipMate-indenting* -If you would like your snippets to be expanded using spaces instead of tabs, -just enable 'expandtab' and set 'softtabstop' to your preferred amount of -spaces. If 'softtabstop' is not set, 'shiftwidth' is used instead. - - *snipMate-remap* -snipMate does not come with a setting to customize the trigger key, but you -can remap it easily in the two lines it's defined in the 'after' directory -under 'plugin/snipMate.vim'. For instance, to change the trigger key -to CTRL-J, just change this: > - - ino =TriggerSnippet() - snor i=TriggerSnippet() - -to this: > - ino =TriggerSnippet() - snor i=TriggerSnippet() - -============================================================================== -FEATURES *snipMate-features* - -snipMate.vim has the following features among others: - - The syntax of snippets is very similar to TextMate's, allowing - easy conversion. - - The position of the snippet is kept transparently (i.e. it does not use - markers/placeholders written to the buffer), which allows you to escape - out of an incomplete snippet, something particularly useful in Vim. - - Variables in snippets are updated as-you-type. - - Snippets can have multiple matches. - - Snippets can be out of order. For instance, in a do...while loop, the - condition can be added before the code. - - [New] File-based snippets are supported. - - [New] Triggers after non-word delimiters are expanded, e.g. "foo" - in "bar.foo". - - [New] can now be used to jump tab stops in reverse order. - -============================================================================== -DISADVANTAGES *snipMate-disadvantages* - -snipMate.vim currently has the following disadvantages to TextMate's snippets: - - There is no $0; the order of tab stops must be explicitly stated. - - Placeholders within placeholders are not possible. E.g.: > - - '${3}
' -< - In TextMate this would first highlight ' id="some_id"', and if - you hit delete it would automatically skip ${2} and go to ${3} - on the next , but if you didn't delete it it would highlight - "some_id" first. You cannot do this in snipMate.vim. - - Regex cannot be performed on variables, such as "${1/.*/\U&}" - - Placeholders cannot span multiple lines. - - Activating snippets in different scopes of the same file is - not possible. - -Perhaps some of these features will be added in a later release. - -============================================================================== -CONTACT *snipMate-contact* *snipMate-author* - -To contact the author (Michael Sanders), please email: - msanders42+snipmate gmail com - -I greatly appreciate any suggestions or improvements offered for the script. - -============================================================================== - -vim:tw=78:ts=8:ft=help:norl: diff --git a/modules/vim/vim.dot.link/doc/taglist.txt b/modules/vim/vim.dot.link/doc/taglist.txt deleted file mode 100755 index 6a62b39..0000000 --- a/modules/vim/vim.dot.link/doc/taglist.txt +++ /dev/null @@ -1,1501 +0,0 @@ -*taglist.txt* Plugin for browsing source code - -Author: Yegappan Lakshmanan (yegappan AT yahoo DOT com) -For Vim version 6.0 and above -Last change: 2007 May 24 - -1. Overview |taglist-intro| -2. Taglist on the internet |taglist-internet| -3. Requirements |taglist-requirements| -4. Installation |taglist-install| -5. Usage |taglist-using| -6. Options |taglist-options| -7. Commands |taglist-commands| -8. Global functions |taglist-functions| -9. Extending |taglist-extend| -10. FAQ |taglist-faq| -11. License |taglist-license| -12. Todo |taglist-todo| - -============================================================================== - *taglist-intro* -1. Overview~ - -The "Tag List" plugin is a source code browser plugin for Vim. This plugin -allows you to efficiently browse through source code files for different -programming languages. The "Tag List" plugin provides the following features: - - * Displays the tags (functions, classes, structures, variables, etc.) - defined in a file in a vertically or horizontally split Vim window. - * In GUI Vim, optionally displays the tags in the Tags drop-down menu and - in the popup menu. - * Automatically updates the taglist window as you switch between - files/buffers. As you open new files, the tags defined in the new files - are added to the existing file list and the tags defined in all the - files are displayed grouped by the filename. - * When a tag name is selected from the taglist window, positions the - cursor at the definition of the tag in the source file. - * Automatically highlights the current tag name. - * Groups the tags by their type and displays them in a foldable tree. - * Can display the prototype and scope of a tag. - * Can optionally display the tag prototype instead of the tag name in the - taglist window. - * The tag list can be sorted either by name or by chronological order. - * Supports the following language files: Assembly, ASP, Awk, Beta, C, - C++, C#, Cobol, Eiffel, Erlang, Fortran, HTML, Java, Javascript, Lisp, - Lua, Make, Pascal, Perl, PHP, Python, Rexx, Ruby, Scheme, Shell, Slang, - SML, Sql, TCL, Verilog, Vim and Yacc. - * Can be easily extended to support new languages. Support for - existing languages can be modified easily. - * Provides functions to display the current tag name in the Vim status - line or the window title bar. - * The list of tags and files in the taglist can be saved and - restored across Vim sessions. - * Provides commands to get the name and prototype of the current tag. - * Runs in both console/terminal and GUI versions of Vim. - * Works with the winmanager plugin. Using the winmanager plugin, you - can use Vim plugins like the file explorer, buffer explorer and the - taglist plugin at the same time like an IDE. - * Can be used in both Unix and MS-Windows systems. - -============================================================================== - *taglist-internet* -2. Taglist on the internet~ - -The home page of the taglist plugin is at: -> - http://vim-taglist.sourceforge.net/ -< -You can subscribe to the taglist mailing list to post your questions or -suggestions for improvement or to send bug reports. Visit the following page -for subscribing to the mailing list: -> - http://groups.yahoo.com/group/taglist -< -============================================================================== - *taglist-requirements* -3. Requirements~ - -The taglist plugin requires the following: - - * Vim version 6.0 and above - * Exuberant ctags 5.0 and above - -The taglist plugin will work on all the platforms where the exuberant ctags -utility and Vim are supported (this includes MS-Windows and Unix based -systems). - -The taglist plugin relies on the exuberant ctags utility to dynamically -generate the tag listing. The exuberant ctags utility must be installed in -your system to use this plugin. The exuberant ctags utility is shipped with -most of the Linux distributions. You can download the exuberant ctags utility -from -> - http://ctags.sourceforge.net -< -The taglist plugin doesn't use or create a tags file and there is no need to -create a tags file to use this plugin. The taglist plugin will not work with -the GNU ctags or the Unix ctags utility. - -This plugin relies on the Vim "filetype" detection mechanism to determine the -type of the current file. You have to turn on the Vim filetype detection by -adding the following line to your .vimrc file: -> - filetype on -< -The taglist plugin will not work if you run Vim in the restricted mode (using -the -Z command-line argument). - -The taglist plugin uses the Vim system() function to invoke the exuberant -ctags utility. If Vim is compiled without the system() function then you -cannot use the taglist plugin. Some of the Linux distributions (Suse) compile -Vim without the system() function for security reasons. - -============================================================================== - *taglist-install* -4. Installation~ - -1. Download the taglist.zip file and unzip the files to the $HOME/.vim or the - $HOME/vimfiles or the $VIM/vimfiles directory. After this step, you should - have the following two files (the directory structure should be preserved): - - plugin/taglist.vim - main taglist plugin file - doc/taglist.txt - documentation (help) file - - Refer to the |add-plugin|and |'runtimepath'| Vim help pages for more - details about installing Vim plugins. -2. Change to the $HOME/.vim/doc or $HOME/vimfiles/doc or $VIM/vimfiles/doc - directory, start Vim and run the ":helptags ." command to process the - taglist help file. Without this step, you cannot jump to the taglist help - topics. -3. If the exuberant ctags utility is not present in one of the directories in - the PATH environment variable, then set the 'Tlist_Ctags_Cmd' variable to - point to the location of the exuberant ctags utility (not to the directory) - in the .vimrc file. -4. If you are running a terminal/console version of Vim and the terminal - doesn't support changing the window width then set the - 'Tlist_Inc_Winwidth' variable to 0 in the .vimrc file. -5. Restart Vim. -6. You can now use the ":TlistToggle" command to open/close the taglist - window. You can use the ":help taglist" command to get more information - about using the taglist plugin. - -To uninstall the taglist plugin, remove the plugin/taglist.vim and -doc/taglist.txt files from the $HOME/.vim or $HOME/vimfiles directory. - -============================================================================== - *taglist-using* -5. Usage~ - -The taglist plugin can be used in several different ways. - -1. You can keep the taglist window open during the entire editing session. On - opening the taglist window, the tags defined in all the files in the Vim - buffer list will be displayed in the taglist window. As you edit files, the - tags defined in them will be added to the taglist window. You can select a - tag from the taglist window and jump to it. The current tag will be - highlighted in the taglist window. You can close the taglist window when - you no longer need the window. -2. You can configure the taglist plugin to process the tags defined in all the - edited files always. In this configuration, even if the taglist window is - closed and the taglist menu is not displayed, the taglist plugin will - processes the tags defined in newly edited files. You can then open the - taglist window only when you need to select a tag and then automatically - close the taglist window after selecting the tag. -3. You can configure the taglist plugin to display only the tags defined in - the current file in the taglist window. By default, the taglist plugin - displays the tags defined in all the files in the Vim buffer list. As you - switch between files, the taglist window will be refreshed to display only - the tags defined in the current file. -4. In GUI Vim, you can use the Tags pull-down and popup menu created by the - taglist plugin to display the tags defined in the current file and select a - tag to jump to it. You can use the menu without opening the taglist window. - By default, the Tags menu is disabled. -5. You can configure the taglist plugin to display the name of the current tag - in the Vim window status line or in the Vim window title bar. For this to - work without the taglist window or menu, you need to configure the taglist - plugin to process the tags defined in a file always. -6. You can save the tags defined in multiple files to a taglist session file - and load it when needed. You can also configure the taglist plugin to not - update the taglist window when editing new files. You can then manually add - files to the taglist window. - -Opening the taglist window~ -You can open the taglist window using the ":TlistOpen" or the ":TlistToggle" -commands. The ":TlistOpen" command opens the taglist window and jumps to it. -The ":TlistToggle" command opens or closes (toggle) the taglist window and the -cursor remains in the current window. If the 'Tlist_GainFocus_On_ToggleOpen' -variable is set to 1, then the ":TlistToggle" command opens the taglist window -and moves the cursor to the taglist window. - -You can map a key to invoke these commands. For example, the following command -creates a normal mode mapping for the key to toggle the taglist window. -> - nnoremap :TlistToggle -< -Add the above mapping to your ~/.vimrc or $HOME/_vimrc file. - -To automatically open the taglist window on Vim startup, set the -'Tlist_Auto_Open' variable to 1. - -You can also open the taglist window on startup using the following command -line: -> - $ vim +TlistOpen -< -Closing the taglist window~ -You can close the taglist window from the taglist window by pressing 'q' or -using the Vim ":q" command. You can also use any of the Vim window commands to -close the taglist window. Invoking the ":TlistToggle" command when the taglist -window is opened, closes the taglist window. You can also use the -":TlistClose" command to close the taglist window. - -To automatically close the taglist window when a tag or file is selected, you -can set the 'Tlist_Close_On_Select' variable to 1. To exit Vim when only the -taglist window is present, set the 'Tlist_Exit_OnlyWindow' variable to 1. - -Jumping to a tag or a file~ -You can select a tag in the taglist window either by pressing the key -or by double clicking the tag name using the mouse. To jump to a tag on a -single mouse click set the 'Tlist_Use_SingleClick' variable to 1. - -If the selected file is already opened in a window, then the cursor is moved -to that window. If the file is not currently opened in a window then the file -is opened in the window used by the taglist plugin to show the previously -selected file. If there are no usable windows, then the file is opened in a -new window. The file is not opened in special windows like the quickfix -window, preview window and windows containing buffer with the 'buftype' option -set. - -To jump to the tag in a new window, press the 'o' key. To open the file in the -previous window (Ctrl-W_p) use the 'P' key. You can press the 'p' key to jump -to the tag but still keep the cursor in the taglist window (preview). - -To open the selected file in a tab, use the 't' key. If the file is already -present in a tab then the cursor is moved to that tab otherwise the file is -opened in a new tab. To jump to a tag in a new tab press Ctrl-t. The taglist -window is automatically opened in the newly created tab. - -Instead of jumping to a tag, you can open a file by pressing the key -or by double clicking the file name using the mouse. - -In the taglist window, you can use the [[ or key to jump to the -beginning of the previous file. You can use the ]] or key to jump to the -beginning of the next file. When you reach the first or last file, the search -wraps around and the jumps to the next/previous file. - -Highlighting the current tag~ -The taglist plugin automatically highlights the name of the current tag in the -taglist window. The Vim |CursorHold| autocmd event is used for this. If the -current tag name is not visible in the taglist window, then the taglist window -contents are scrolled to make that tag name visible. You can also use the -":TlistHighlightTag" command to force the highlighting of the current tag. - -The tag name is highlighted if no activity is performed for |'updatetime'| -milliseconds. The default value for this Vim option is 4 seconds. To avoid -unexpected problems, you should not set the |'updatetime'| option to a very -low value. - -To disable the automatic highlighting of the current tag name in the taglist -window, set the 'Tlist_Auto_Highlight_Tag' variable to zero. - -When entering a Vim buffer/window, the taglist plugin automatically highlights -the current tag in that buffer/window. If you like to disable the automatic -highlighting of the current tag when entering a buffer, set the -'Tlist_Highlight_Tag_On_BufEnter' variable to zero. - -Adding files to the taglist~ -When the taglist window is opened, all the files in the Vim buffer list are -processed and the supported files are added to the taglist. When you edit a -file in Vim, the taglist plugin automatically processes this file and adds it -to the taglist. If you close the taglist window, the tag information in the -taglist is retained. - -To process files even when the taglist window is not open, set the -'Tlist_Process_File_Always' variable to 1. - -You can manually add multiple files to the taglist without opening them using -the ":TlistAddFiles" and the ":TlistAddFilesRecursive" commands. - -For example, to add all the C files in the /my/project/dir directory to the -taglist, you can use the following command: -> - :TlistAddFiles /my/project/dir/*.c -< -Note that when adding several files with a large number of tags or a large -number of files, it will take several seconds to several minutes for the -taglist plugin to process all the files. You should not interrupt the taglist -plugin by pressing . - -You can recursively add multiple files from a directory tree using the -":TlistAddFilesRecursive" command: -> - :TlistAddFilesRecursive /my/project/dir *.c -< -This command takes two arguments. The first argument specifies the directory -from which to recursively add the files. The second optional argument -specifies the wildcard matching pattern for selecting the files to add. The -default pattern is * and all the files are added. - -Displaying tags for only one file~ -The taglist window displays the tags for all the files in the Vim buffer list -and all the manually added files. To display the tags for only the current -active buffer, set the 'Tlist_Show_One_File' variable to 1. - -Removing files from the taglist~ -You can remove a file from the taglist window, by pressing the 'd' key when the -cursor is on one of the tags listed for the file in the taglist window. The -removed file will no longer be displayed in the taglist window in the current -Vim session. To again display the tags for the file, open the file in a Vim -window and then use the ":TlistUpdate" command or use ":TlistAddFiles" command -to add the file to the taglist. - -When a buffer is removed from the Vim buffer list using the ":bdelete" or the -":bwipeout" command, the taglist is updated to remove the stored information -for this buffer. - -Updating the tags displayed for a file~ -The taglist plugin keeps track of the modification time of a file. When the -modification time changes (the file is modified), the taglist plugin -automatically updates the tags listed for that file. The modification time of -a file is checked when you enter a window containing that file or when you -load that file. - -You can also update or refresh the tags displayed for a file by pressing the -"u" key in the taglist window. If an existing file is modified, after the file -is saved, the taglist plugin automatically updates the tags displayed for the -file. - -You can also use the ":TlistUpdate" command to update the tags for the current -buffer after you made some changes to it. You should save the modified buffer -before you update the taglist window. Otherwise the listed tags will not -include the new tags created in the buffer. - -If you have deleted the tags displayed for a file in the taglist window using -the 'd' key, you can again display the tags for that file using the -":TlistUpdate" command. - -Controlling the taglist updates~ -To disable the automatic processing of new files or modified files, you can -set the 'Tlist_Auto_Update' variable to zero. When this variable is set to -zero, the taglist is updated only when you use the ":TlistUpdate" command or -the ":TlistAddFiles" or the ":TlistAddFilesRecursive" commands. You can use -this option to control which files are added to the taglist. - -You can use the ":TlistLock" command to lock the taglist contents. After this -command is executed, new files are not automatically added to the taglist. -When the taglist is locked, you can use the ":TlistUpdate" command to add the -current file or the ":TlistAddFiles" or ":TlistAddFilesRecursive" commands to -add new files to the taglist. To unlock the taglist, use the ":TlistUnlock" -command. - -Displaying the tag prototype~ -To display the prototype of the tag under the cursor in the taglist window, -press the space bar. If you place the cursor on a tag name in the taglist -window, then the tag prototype is displayed at the Vim status line after -|'updatetime'| milliseconds. The default value for the |'updatetime'| Vim -option is 4 seconds. - -You can get the name and prototype of a tag without opening the taglist window -and the taglist menu using the ":TlistShowTag" and the ":TlistShowPrototype" -commands. These commands will work only if the current file is already present -in the taglist. To use these commands without opening the taglist window, set -the 'Tlist_Process_File_Always' variable to 1. - -You can use the ":TlistShowTag" command to display the name of the tag at or -before the specified line number in the specified file. If the file name and -line number are not supplied, then this command will display the name of the -current tag. For example, -> - :TlistShowTag - :TlistShowTag myfile.java 100 -< -You can use the ":TlistShowPrototype" command to display the prototype of the -tag at or before the specified line number in the specified file. If the file -name and the line number are not supplied, then this command will display the -prototype of the current tag. For example, -> - :TlistShowPrototype - :TlistShowPrototype myfile.c 50 -< -In the taglist window, when the mouse is moved over a tag name, the tag -prototype is displayed in a balloon. This works only in GUI versions where -balloon evaluation is supported. - -Taglist window contents~ -The taglist window contains the tags defined in various files in the taglist -grouped by the filename and by the tag type (variable, function, class, etc.). -For tags with scope information (like class members, structures inside -structures, etc.), the scope information is displayed in square brackets "[]" -after the tag name. - -The contents of the taglist buffer/window are managed by the taglist plugin. -The |'filetype'| for the taglist buffer is set to 'taglist'. The Vim -|'modifiable'| option is turned off for the taglist buffer. You should not -manually edit the taglist buffer, by setting the |'modifiable'| flag. If you -manually edit the taglist buffer contents, then the taglist plugin will be out -of sync with the taglist buffer contents and the plugin will no longer work -correctly. To redisplay the taglist buffer contents again, close the taglist -window and reopen it. - -Opening and closing the tag and file tree~ -In the taglist window, the tag names are displayed as a foldable tree using -the Vim folding support. You can collapse the tree using the '-' key or using -the Vim |zc| fold command. You can open the tree using the '+' key or using -the Vim |zo| fold command. You can open all the folds using the '*' key or -using the Vim |zR| fold command. You can also use the mouse to open/close the -folds. You can close all the folds using the '=' key. You should not manually -create or delete the folds in the taglist window. - -To automatically close the fold for the inactive files/buffers and open only -the fold for the current buffer in the taglist window, set the -'Tlist_File_Fold_Auto_Close' variable to 1. - -Sorting the tags for a file~ -The tags displayed in the taglist window can be sorted either by their name or -by their chronological order. The default sorting method is by the order in -which the tags appear in a file. You can change the default sort method by -setting the 'Tlist_Sort_Type' variable to either "name" or "order". You can -sort the tags by their name by pressing the "s" key in the taglist window. You -can again sort the tags by their chronological order using the "s" key. Each -file in the taglist window can be sorted using different order. - -Zooming in and out of the taglist window~ -You can press the 'x' key in the taglist window to maximize the taglist -window width/height. The window will be maximized to the maximum possible -width/height without closing the other existing windows. You can again press -'x' to restore the taglist window to the default width/height. - - *taglist-session* -Taglist Session~ -A taglist session refers to the group of files and their tags stored in the -taglist in a Vim session. - -You can save and restore a taglist session (and all the displayed tags) using -the ":TlistSessionSave" and ":TlistSessionLoad" commands. - -To save the information about the tags and files in the taglist to a file, use -the ":TlistSessionSave" command and specify the filename: -> - :TlistSessionSave -< -To load a saved taglist session, use the ":TlistSessionLoad" command: > - - :TlistSessionLoad -< -When you load a taglist session file, the tags stored in the file will be -added to the tags already stored in the taglist. - -The taglist session feature can be used to save the tags for large files or a -group of frequently used files (like a project). By using the taglist session -file, you can minimize the amount to time it takes to load/refresh the taglist -for multiple files. - -You can create more than one taglist session file for multiple groups of -files. - -Displaying the tag name in the Vim status line or the window title bar~ -You can use the Tlist_Get_Tagname_By_Line() function provided by the taglist -plugin to display the current tag name in the Vim status line or the window -title bar. Similarly, you can use the Tlist_Get_Tag_Prototype_By_Line() -function to display the current tag prototype in the Vim status line or the -window title bar. - -For example, the following command can be used to display the current tag name -in the status line: -> - :set statusline=%<%f%=%([%{Tlist_Get_Tagname_By_Line()}]%) -< -The following command can be used to display the current tag name in the -window title bar: -> - :set title titlestring=%<%f\ %([%{Tlist_Get_Tagname_By_Line()}]%) -< -Note that the current tag name can be displayed only after the file is -processed by the taglist plugin. For this, you have to either set the -'Tlist_Process_File_Always' variable to 1 or open the taglist window or use -the taglist menu. For more information about configuring the Vim status line, -refer to the documentation for the Vim |'statusline'| option. - -Changing the taglist window highlighting~ -The following Vim highlight groups are defined and used to highlight the -various entities in the taglist window: - - TagListTagName - Used for tag names - TagListTagScope - Used for tag scope - TagListTitle - Used for tag titles - TagListComment - Used for comments - TagListFileName - Used for filenames - -By default, these highlight groups are linked to the standard Vim highlight -groups. If you want to change the colors used for these highlight groups, -prefix the highlight group name with 'My' and define it in your .vimrc or -.gvimrc file: MyTagListTagName, MyTagListTagScope, MyTagListTitle, -MyTagListComment and MyTagListFileName. For example, to change the colors -used for tag names, you can use the following command: -> - :highlight MyTagListTagName guifg=blue ctermfg=blue -< -Controlling the taglist window~ -To use a horizontally split taglist window, instead of a vertically split -window, set the 'Tlist_Use_Horiz_Window' variable to 1. - -To use a vertically split taglist window on the rightmost side of the Vim -window, set the 'Tlist_Use_Right_Window' variable to 1. - -You can specify the width of the vertically split taglist window, by setting -the 'Tlist_WinWidth' variable. You can specify the height of the horizontally -split taglist window, by setting the 'Tlist_WinHeight' variable. - -When opening a vertically split taglist window, the Vim window width is -increased to accommodate the new taglist window. When the taglist window is -closed, the Vim window is reduced. To disable this, set the -'Tlist_Inc_Winwidth' variable to zero. - -To reduce the number of empty lines in the taglist window, set the -'Tlist_Compact_Format' variable to 1. - -To not display the Vim fold column in the taglist window, set the -'Tlist_Enable_Fold_Column' variable to zero. - -To display the tag prototypes instead of the tag names in the taglist window, -set the 'Tlist_Display_Prototype' variable to 1. - -To not display the scope of the tags next to the tag names, set the -'Tlist_Display_Tag_Scope' variable to zero. - - *taglist-keys* -Taglist window key list~ -The following table lists the description of the keys that can be used -in the taglist window. - - Key Description~ - - Jump to the location where the tag under cursor is - defined. - o Jump to the location where the tag under cursor is - defined in a new window. - P Jump to the tag in the previous (Ctrl-W_p) window. - p Display the tag definition in the file window and - keep the cursor in the taglist window itself. - t Jump to the tag in a new tab. If the file is already - opened in a tab, move to that tab. - Ctrl-t Jump to the tag in a new tab. - Display the prototype of the tag under the cursor. - For file names, display the full path to the file, - file type and the number of tags. For tag types, display the - tag type and the number of tags. - u Update the tags listed in the taglist window - s Change the sort order of the tags (by name or by order) - d Remove the tags for the file under the cursor - x Zoom-in or Zoom-out the taglist window - + Open a fold - - Close a fold - * Open all folds - = Close all folds - [[ Jump to the beginning of the previous file - Jump to the beginning of the previous file - ]] Jump to the beginning of the next file - Jump to the beginning of the next file - q Close the taglist window - Display help - -The above keys will work in both the normal mode and the insert mode. - - *taglist-menu* -Taglist menu~ -When using GUI Vim, the taglist plugin can display the tags defined in the -current file in the drop-down menu and the popup menu. By default, this -feature is turned off. To turn on this feature, set the 'Tlist_Show_Menu' -variable to 1. - -You can jump to a tag by selecting the tag name from the menu. You can use the -taglist menu independent of the taglist window i.e. you don't need to open the -taglist window to get the taglist menu. - -When you switch between files/buffers, the taglist menu is automatically -updated to display the tags defined in the current file/buffer. - -The tags are grouped by their type (variables, functions, classes, methods, -etc.) and displayed as a separate sub-menu for each type. If all the tags -defined in a file are of the same type (e.g. functions), then the sub-menu is -not used. - -If the number of items in a tag type submenu exceeds the value specified by -the 'Tlist_Max_Submenu_Items' variable, then the submenu will be split into -multiple submenus. The default setting for 'Tlist_Max_Submenu_Items' is 25. -The first and last tag names in the submenu are used to form the submenu name. -The menu items are prefixed by alpha-numeric characters for easy selection by -keyboard. - -If the popup menu support is enabled (the |'mousemodel'| option contains -"popup"), then the tags menu is added to the popup menu. You can access -the popup menu by right clicking on the GUI window. - -You can regenerate the tags menu by selecting the 'Tags->Refresh menu' entry. -You can sort the tags listed in the menu either by name or by order by -selecting the 'Tags->Sort menu by->Name/Order' menu entry. - -You can tear-off the Tags menu and keep it on the side of the Vim window -for quickly locating the tags. - -Using the taglist plugin with the winmanager plugin~ -You can use the taglist plugin with the winmanager plugin. This will allow you -to use the file explorer, buffer explorer and the taglist plugin at the same -time in different windows. To use the taglist plugin with the winmanager -plugin, set 'TagList' in the 'winManagerWindowLayout' variable. For example, -to use the file explorer plugin and the taglist plugin at the same time, use -the following setting: > - - let winManagerWindowLayout = 'FileExplorer|TagList' -< -Getting help~ -If you have installed the taglist help file (this file), then you can use the -Vim ":help taglist-" command to get help on the various taglist -topics. - -You can press the key in the taglist window to display the help -information about using the taglist window. If you again press the key, -the help information is removed from the taglist window. - - *taglist-debug* -Debugging the taglist plugin~ -You can use the ":TlistDebug" command to enable logging of the debug messages -from the taglist plugin. To display the logged debug messages, you can use the -":TlistMessages" command. To disable the logging of the debug messages, use -the ":TlistUndebug" command. - -You can specify a file name to the ":TlistDebug" command to log the debug -messages to a file. Otherwise, the debug messages are stored in a script-local -variable. In the later case, to minimize memory usage, only the last 3000 -characters from the debug messages are stored. - -============================================================================== - *taglist-options* -6. Options~ - -A number of Vim variables control the behavior of the taglist plugin. These -variables are initialized to a default value. By changing these variables you -can change the behavior of the taglist plugin. You need to change these -settings only if you want to change the behavior of the taglist plugin. You -should use the |:let| command in your .vimrc file to change the setting of any -of these variables. - -The configurable taglist variables are listed below. For a detailed -description of these variables refer to the text below this table. - -|'Tlist_Auto_Highlight_Tag'| Automatically highlight the current tag in the - taglist. -|'Tlist_Auto_Open'| Open the taglist window when Vim starts. -|'Tlist_Auto_Update'| Automatically update the taglist to include - newly edited files. -|'Tlist_Close_On_Select'| Close the taglist window when a file or tag is - selected. -|'Tlist_Compact_Format'| Remove extra information and blank lines from - the taglist window. -|'Tlist_Ctags_Cmd'| Specifies the path to the ctags utility. -|'Tlist_Display_Prototype'| Show prototypes and not tags in the taglist - window. -|'Tlist_Display_Tag_Scope'| Show tag scope next to the tag name. -|'Tlist_Enable_Fold_Column'| Show the fold indicator column in the taglist - window. -|'Tlist_Exit_OnlyWindow'| Close Vim if the taglist is the only window. -|'Tlist_File_Fold_Auto_Close'| Close tag folds for inactive buffers. -|'Tlist_GainFocus_On_ToggleOpen'| - Jump to taglist window on open. -|'Tlist_Highlight_Tag_On_BufEnter'| - On entering a buffer, automatically highlight - the current tag. -|'Tlist_Inc_Winwidth'| Increase the Vim window width to accommodate - the taglist window. -|'Tlist_Max_Submenu_Items'| Maximum number of items in a tags sub-menu. -|'Tlist_Max_Tag_Length'| Maximum tag length used in a tag menu entry. -|'Tlist_Process_File_Always'| Process files even when the taglist window is - closed. -|'Tlist_Show_Menu'| Display the tags menu. -|'Tlist_Show_One_File'| Show tags for the current buffer only. -|'Tlist_Sort_Type'| Sort method used for arranging the tags. -|'Tlist_Use_Horiz_Window'| Use a horizontally split window for the - taglist window. -|'Tlist_Use_Right_Window'| Place the taglist window on the right side. -|'Tlist_Use_SingleClick'| Single click on a tag jumps to it. -|'Tlist_WinHeight'| Horizontally split taglist window height. -|'Tlist_WinWidth'| Vertically split taglist window width. - - *'Tlist_Auto_Highlight_Tag'* -Tlist_Auto_Highlight_Tag~ -The taglist plugin will automatically highlight the current tag in the taglist -window. If you want to disable this, then you can set the -'Tlist_Auto_Highlight_Tag' variable to zero. Note that even though the current -tag highlighting is disabled, the tags for a new file will still be added to -the taglist window. -> - let Tlist_Auto_Highlight_Tag = 0 -< -With the above variable set to 1, you can use the ":TlistHighlightTag" command -to highlight the current tag. - - *'Tlist_Auto_Open'* -Tlist_Auto_Open~ -To automatically open the taglist window, when you start Vim, you can set the -'Tlist_Auto_Open' variable to 1. By default, this variable is set to zero and -the taglist window will not be opened automatically on Vim startup. -> - let Tlist_Auto_Open = 1 -< -The taglist window is opened only when a supported type of file is opened on -Vim startup. For example, if you open text files, then the taglist window will -not be opened. - - *'Tlist_Auto_Update'* -Tlist_Auto_Update~ -When a new file is edited, the tags defined in the file are automatically -processed and added to the taglist. To stop adding new files to the taglist, -set the 'Tlist_Auto_Update' variable to zero. By default, this variable is set -to 1. -> - let Tlist_Auto_Update = 0 -< -With the above variable set to 1, you can use the ":TlistUpdate" command to -add the tags defined in the current file to the taglist. - - *'Tlist_Close_On_Select'* -Tlist_Close_On_Select~ -If you want to close the taglist window when a file or tag is selected, then -set the 'Tlist_Close_On_Select' variable to 1. By default, this variable is -set zero and when you select a tag or file from the taglist window, the window -is not closed. -> - let Tlist_Close_On_Select = 1 -< - *'Tlist_Compact_Format'* -Tlist_Compact_Format~ -By default, empty lines are used to separate different tag types displayed for -a file and the tags displayed for different files in the taglist window. If -you want to display as many tags as possible in the taglist window, you can -set the 'Tlist_Compact_Format' variable to 1 to get a compact display. -> - let Tlist_Compact_Format = 1 -< - *'Tlist_Ctags_Cmd'* -Tlist_Ctags_Cmd~ -The 'Tlist_Ctags_Cmd' variable specifies the location (path) of the exuberant -ctags utility. If exuberant ctags is present in any one of the directories in -the PATH environment variable, then there is no need to set this variable. - -The exuberant ctags tool can be installed under different names. When the -taglist plugin starts up, if the 'Tlist_Ctags_Cmd' variable is not set, it -checks for the names exuberant-ctags, exctags, ctags, ctags.exe and tags in -the PATH environment variable. If any one of the named executable is found, -then the Tlist_Ctags_Cmd variable is set to that name. - -If exuberant ctags is not present in one of the directories specified in the -PATH environment variable, then set this variable to point to the location of -the ctags utility in your system. Note that this variable should point to the -fully qualified exuberant ctags location and NOT to the directory in which -exuberant ctags is installed. If the exuberant ctags tool is not found in -either PATH or in the specified location, then the taglist plugin will not be -loaded. Examples: -> - let Tlist_Ctags_Cmd = 'd:\tools\ctags.exe' - let Tlist_Ctags_Cmd = '/usr/local/bin/ctags' -< - *'Tlist_Display_Prototype'* -Tlist_Display_Prototype~ -By default, only the tag name will be displayed in the taglist window. If you -like to see tag prototypes instead of names, set the 'Tlist_Display_Prototype' -variable to 1. By default, this variable is set to zero and only tag names -will be displayed. -> - let Tlist_Display_Prototype = 1 -< - *'Tlist_Display_Tag_Scope'* -Tlist_Display_Tag_Scope~ -By default, the scope of a tag (like a C++ class) will be displayed in -square brackets next to the tag name. If you don't want the tag scopes -to be displayed, then set the 'Tlist_Display_Tag_Scope' to zero. By default, -this variable is set to 1 and the tag scopes will be displayed. -> - let Tlist_Display_Tag_Scope = 0 -< - *'Tlist_Enable_Fold_Column'* -Tlist_Enable_Fold_Column~ -By default, the Vim fold column is enabled and displayed in the taglist -window. If you wish to disable this (for example, when you are working with a -narrow Vim window or terminal), you can set the 'Tlist_Enable_Fold_Column' -variable to zero. -> - let Tlist_Enable_Fold_Column = 1 -< - *'Tlist_Exit_OnlyWindow'* -Tlist_Exit_OnlyWindow~ -If you want to exit Vim if only the taglist window is currently opened, then -set the 'Tlist_Exit_OnlyWindow' variable to 1. By default, this variable is -set to zero and the Vim instance will not be closed if only the taglist window -is present. -> - let Tlist_Exit_OnlyWindow = 1 -< - *'Tlist_File_Fold_Auto_Close'* -Tlist_File_Fold_Auto_Close~ -By default, the tags tree displayed in the taglist window for all the files is -opened. You can close/fold the tags tree for the files manually. To -automatically close the tags tree for inactive files, you can set the -'Tlist_File_Fold_Auto_Close' variable to 1. When this variable is set to 1, -the tags tree for the current buffer is automatically opened and for all the -other buffers is closed. -> - let Tlist_File_Fold_Auto_Close = 1 -< - *'Tlist_GainFocus_On_ToggleOpen'* -Tlist_GainFocus_On_ToggleOpen~ -When the taglist window is opened using the ':TlistToggle' command, this -option controls whether the cursor is moved to the taglist window or remains -in the current window. By default, this option is set to 0 and the cursor -remains in the current window. When this variable is set to 1, the cursor -moves to the taglist window after opening the taglist window. -> - let Tlist_GainFocus_On_ToggleOpen = 1 -< - *'Tlist_Highlight_Tag_On_BufEnter'* -Tlist_Highlight_Tag_On_BufEnter~ -When you enter a Vim buffer/window, the current tag in that buffer/window is -automatically highlighted in the taglist window. If the current tag name is -not visible in the taglist window, then the taglist window contents are -scrolled to make that tag name visible. If you like to disable the automatic -highlighting of the current tag when entering a buffer, you can set the -'Tlist_Highlight_Tag_On_BufEnter' variable to zero. The default setting for -this variable is 1. -> - let Tlist_Highlight_Tag_On_BufEnter = 0 -< - *'Tlist_Inc_Winwidth'* -Tlist_Inc_Winwidth~ -By default, when the width of the window is less than 100 and a new taglist -window is opened vertically, then the window width is increased by the value -set in the 'Tlist_WinWidth' variable to accommodate the new window. The value -of this variable is used only if you are using a vertically split taglist -window. - -If your terminal doesn't support changing the window width from Vim (older -version of xterm running in a Unix system) or if you see any weird problems in -the screen due to the change in the window width or if you prefer not to -adjust the window width then set the 'Tlist_Inc_Winwidth' variable to zero. -CAUTION: If you are using the MS-Windows version of Vim in a MS-DOS command -window then you must set this variable to zero, otherwise the system may hang -due to a Vim limitation (explained in :help win32-problems) -> - let Tlist_Inc_Winwidth = 0 -< - *'Tlist_Max_Submenu_Items'* -Tlist_Max_Submenu_Items~ -If a file contains too many tags of a particular type (function, variable, -class, etc.), greater than that specified by the 'Tlist_Max_Submenu_Items' -variable, then the menu for that tag type will be split into multiple -sub-menus. The default setting for the 'Tlist_Max_Submenu_Items' variable is -25. This can be changed by setting the 'Tlist_Max_Submenu_Items' variable: -> - let Tlist_Max_Submenu_Items = 20 -< -The name of the submenu is formed using the names of the first and the last -tag entries in that submenu. - - *'Tlist_Max_Tag_Length'* -Tlist_Max_Tag_Length~ -Only the first 'Tlist_Max_Tag_Length' characters from the tag names will be -used to form the tag type submenu name. The default value for this variable is -10. Change the 'Tlist_Max_Tag_Length' setting if you want to include more or -less characters: -> - let Tlist_Max_Tag_Length = 10 -< - *'Tlist_Process_File_Always'* -Tlist_Process_File_Always~ -By default, the taglist plugin will generate and process the tags defined in -the newly opened files only when the taglist window is opened or when the -taglist menu is enabled. When the taglist window is closed, the taglist plugin -will stop processing the tags for newly opened files. - -You can set the 'Tlist_Process_File_Always' variable to 1 to generate the list -of tags for new files even when the taglist window is closed and the taglist -menu is disabled. -> - let Tlist_Process_File_Always = 1 -< -To use the ":TlistShowTag" and the ":TlistShowPrototype" commands without the -taglist window and the taglist menu, you should set this variable to 1. - - *'Tlist_Show_Menu'* -Tlist_Show_Menu~ -When using GUI Vim, you can display the tags defined in the current file in a -menu named "Tags". By default, this feature is turned off. To turn on this -feature, set the 'Tlist_Show_Menu' variable to 1: -> - let Tlist_Show_Menu = 1 -< - *'Tlist_Show_One_File'* -Tlist_Show_One_File~ -By default, the taglist plugin will display the tags defined in all the loaded -buffers in the taglist window. If you prefer to display the tags defined only -in the current buffer, then you can set the 'Tlist_Show_One_File' to 1. When -this variable is set to 1, as you switch between buffers, the taglist window -will be refreshed to display the tags for the current buffer and the tags for -the previous buffer will be removed. -> - let Tlist_Show_One_File = 1 -< - *'Tlist_Sort_Type'* -Tlist_Sort_Type~ -The 'Tlist_Sort_Type' variable specifies the sort order for the tags in the -taglist window. The tags can be sorted either alphabetically by their name or -by the order of their appearance in the file (chronological order). By -default, the tag names will be listed by the order in which they are defined -in the file. You can change the sort type (from name to order or from order to -name) by pressing the "s" key in the taglist window. You can also change the -default sort order by setting 'Tlist_Sort_Type' to "name" or "order": -> - let Tlist_Sort_Type = "name" -< - *'Tlist_Use_Horiz_Window'* -Tlist_Use_Horiz_Window~ -Be default, the tag names are displayed in a vertically split window. If you -prefer a horizontally split window, then set the 'Tlist_Use_Horiz_Window' -variable to 1. If you are running MS-Windows version of Vim in a MS-DOS -command window, then you should use a horizontally split window instead of a -vertically split window. Also, if you are using an older version of xterm in a -Unix system that doesn't support changing the xterm window width, you should -use a horizontally split window. -> - let Tlist_Use_Horiz_Window = 1 -< - *'Tlist_Use_Right_Window'* -Tlist_Use_Right_Window~ -By default, the vertically split taglist window will appear on the left hand -side. If you prefer to open the window on the right hand side, you can set the -'Tlist_Use_Right_Window' variable to 1: -> - let Tlist_Use_Right_Window = 1 -< - *'Tlist_Use_SingleClick'* -Tlist_Use_SingleClick~ -By default, when you double click on the tag name using the left mouse -button, the cursor will be positioned at the definition of the tag. You -can set the 'Tlist_Use_SingleClick' variable to 1 to jump to a tag when -you single click on the tag name using the mouse. By default this variable -is set to zero. -> - let Tlist_Use_SingleClick = 1 -< -Due to a bug in Vim, if you set 'Tlist_Use_SingleClick' to 1 and try to resize -the taglist window using the mouse, then Vim will crash. This problem is fixed -in Vim 6.3 and above. In the meantime, instead of resizing the taglist window -using the mouse, you can use normal Vim window resizing commands to resize the -taglist window. - - *'Tlist_WinHeight'* -Tlist_WinHeight~ -The default height of the horizontally split taglist window is 10. This can be -changed by modifying the 'Tlist_WinHeight' variable: -> - let Tlist_WinHeight = 20 -< -The |'winfixheight'| option is set for the taglist window, to maintain the -height of the taglist window, when new Vim windows are opened and existing -windows are closed. - - *'Tlist_WinWidth'* -Tlist_WinWidth~ -The default width of the vertically split taglist window is 30. This can be -changed by modifying the 'Tlist_WinWidth' variable: -> - let Tlist_WinWidth = 20 -< -Note that the value of the |'winwidth'| option setting determines the minimum -width of the current window. If you set the 'Tlist_WinWidth' variable to a -value less than that of the |'winwidth'| option setting, then Vim will use the -value of the |'winwidth'| option. - -When new Vim windows are opened and existing windows are closed, the taglist -plugin will try to maintain the width of the taglist window to the size -specified by the 'Tlist_WinWidth' variable. - -============================================================================== - *taglist-commands* -7. Commands~ - -The taglist plugin provides the following ex-mode commands: - -|:TlistAddFiles| Add multiple files to the taglist. -|:TlistAddFilesRecursive| - Add files recursively to the taglist. -|:TlistClose| Close the taglist window. -|:TlistDebug| Start logging of taglist debug messages. -|:TlistLock| Stop adding new files to the taglist. -|:TlistMessages| Display the logged taglist plugin debug messages. -|:TlistOpen| Open and jump to the taglist window. -|:TlistSessionSave| Save the information about files and tags in the - taglist to a session file. -|:TlistSessionLoad| Load the information about files and tags stored - in a session file to taglist. -|:TlistShowPrototype| Display the prototype of the tag at or before the - specified line number. -|:TlistShowTag| Display the name of the tag defined at or before the - specified line number. -|:TlistHighlightTag| Highlight the current tag in the taglist window. -|:TlistToggle| Open or close (toggle) the taglist window. -|:TlistUndebug| Stop logging of taglist debug messages. -|:TlistUnlock| Start adding new files to the taglist. -|:TlistUpdate| Update the tags for the current buffer. - - *:TlistAddFiles* -:TlistAddFiles {file(s)} [file(s) ...] - Add one or more specified files to the taglist. You can - specify multiple filenames using wildcards. To specify a - file name with space character, you should escape the space - character with a backslash. - Examples: -> - :TlistAddFiles *.c *.cpp - :TlistAddFiles file1.html file2.html -< - If you specify a large number of files, then it will take some - time for the taglist plugin to process all of them. The - specified files will not be edited in a Vim window and will - not be added to the Vim buffer list. - - *:TlistAddFilesRecursive* -:TlistAddFilesRecursive {directory} [ {pattern} ] - Add files matching {pattern} recursively from the specified - {directory} to the taglist. If {pattern} is not specified, - then '*' is assumed. To specify the current directory, use "." - for {directory}. To specify a directory name with space - character, you should escape the space character with a - backslash. - Examples: -> - :TlistAddFilesRecursive myproject *.java - :TlistAddFilesRecursive smallproject -< - If large number of files are present in the specified - directory tree, then it will take some time for the taglist - plugin to process all of them. - - *:TlistClose* -:TlistClose Close the taglist window. This command can be used from any - one of the Vim windows. - - *:TlistDebug* -:TlistDebug [filename] - Start logging of debug messages from the taglist plugin. - If {filename} is specified, then the debug messages are stored - in the specified file. Otherwise, the debug messages are - stored in a script local variable. If the file {filename} is - already present, then it is overwritten. - - *:TlistLock* -:TlistLock - Lock the taglist and don't process new files. After this - command is executed, newly edited files will not be added to - the taglist. - - *:TlistMessages* -:TlistMessages - Display the logged debug messages from the taglist plugin - in a window. This command works only when logging to a - script-local variable. - - *:TlistOpen* -:TlistOpen Open and jump to the taglist window. Creates the taglist - window, if the window is not opened currently. After executing - this command, the cursor is moved to the taglist window. When - the taglist window is opened for the first time, all the files - in the buffer list are processed and the tags defined in them - are displayed in the taglist window. - - *:TlistSessionSave* -:TlistSessionSave {filename} - Saves the information about files and tags in the taglist to - the specified file. This command can be used to save and - restore the taglist contents across Vim sessions. - - *:TlistSessionLoad* -:TlistSessionLoad {filename} - Load the information about files and tags stored in the - specified session file to the taglist. - - *:TlistShowPrototype* -:TlistShowPrototype [filename] [linenumber] - Display the prototype of the tag at or before the specified - line number. If the file name and the line number are not - specified, then the current file name and line number are - used. A tag spans multiple lines starting from the line where - it is defined to the line before the next tag. This command - displays the prototype for the tag for any line number in this - range. - - *:TlistShowTag* -:TlistShowTag [filename] [linenumber] - Display the name of the tag defined at or before the specified - line number. If the file name and the line number are not - specified, then the current file name and line number are - used. A tag spans multiple lines starting from the line where - it is defined to the line before the next tag. This command - displays the tag name for any line number in this range. - - *:TlistHighlightTag* -:TlistHighlightTag - Highlight the current tag in the taglist window. By default, - the taglist plugin periodically updates the taglist window to - highlight the current tag. This command can be used to force - the taglist plugin to highlight the current tag. - - *:TlistToggle* -:TlistToggle Open or close (toggle) the taglist window. Opens the taglist - window, if the window is not opened currently. Closes the - taglist window, if the taglist window is already opened. When - the taglist window is opened for the first time, all the files - in the buffer list are processed and the tags are displayed in - the taglist window. After executing this command, the cursor - is not moved from the current window to the taglist window. - - *:TlistUndebug* -:TlistUndebug - Stop logging of debug messages from the taglist plugin. - - *:TlistUnlock* -:TlistUnlock - Unlock the taglist and start processing newly edited files. - - *:TlistUpdate* -:TlistUpdate Update the tags information for the current buffer. This - command can be used to re-process the current file/buffer and - get the tags information. As the taglist plugin uses the file - saved in the disk (instead of the file displayed in a Vim - buffer), you should save a modified buffer before you update - the taglist. Otherwise the listed tags will not include the - new tags created in the buffer. You can use this command even - when the taglist window is not opened. - -============================================================================== - *taglist-functions* -8. Global functions~ - -The taglist plugin provides several global functions that can be used from -other Vim plugins to interact with the taglist plugin. These functions are -described below. - -|Tlist_Update_File_Tags()| Update the tags for the specified file -|Tlist_Get_Tag_Prototype_By_Line()| Return the prototype of the tag at or - before the specified line number in the - specified file. -|Tlist_Get_Tagname_By_Line()| Return the name of the tag at or - before the specified line number in - the specified file. -|Tlist_Set_App()| Set the name of the application - controlling the taglist window. - - *Tlist_Update_File_Tags()* -Tlist_Update_File_Tags({filename}, {filetype}) - Update the tags for the file {filename}. The second argument - specifies the Vim filetype for the file. If the taglist plugin - has not processed the file previously, then the exuberant - ctags tool is invoked to generate the tags for the file. - - *Tlist_Get_Tag_Prototype_By_Line()* -Tlist_Get_Tag_Prototype_By_Line([{filename}, {linenumber}]) - Return the prototype of the tag at or before the specified - line number in the specified file. If the filename and line - number are not specified, then the current buffer name and the - current line number are used. - - *Tlist_Get_Tagname_By_Line()* -Tlist_Get_Tagname_By_Line([{filename}, {linenumber}]) - Return the name of the tag at or before the specified line - number in the specified file. If the filename and line number - are not specified, then the current buffer name and the - current line number are used. - - *Tlist_Set_App()* -Tlist_Set_App({appname}) - Set the name of the plugin that controls the taglist plugin - window and buffer. This can be used to integrate the taglist - plugin with other Vim plugins. - - For example, the winmanager plugin and the Cream package use - this function and specify the appname as "winmanager" and - "cream" respectively. - - By default, the taglist plugin is a stand-alone plugin and - controls the taglist window and buffer. If the taglist window - is controlled by an external plugin, then the appname should - be set appropriately. - -============================================================================== - *taglist-extend* -9. Extending~ - -The taglist plugin supports all the languages supported by the exuberant ctags -tool, which includes the following languages: Assembly, ASP, Awk, Beta, C, -C++, C#, Cobol, Eiffel, Erlang, Fortran, HTML, Java, Javascript, Lisp, Lua, -Make, Pascal, Perl, PHP, Python, Rexx, Ruby, Scheme, Shell, Slang, SML, Sql, -TCL, Verilog, Vim and Yacc. - -You can extend the taglist plugin to add support for new languages and also -modify the support for the above listed languages. - -You should NOT make modifications to the taglist plugin script file to add -support for new languages. You will lose these changes when you upgrade to the -next version of the taglist plugin. Instead you should follow the below -described instructions to extend the taglist plugin. - -You can extend the taglist plugin by setting variables in the .vimrc or _vimrc -file. The name of these variables depends on the language name and is -described below. - -Modifying support for an existing language~ -To modify the support for an already supported language, you have to set the -tlist_xxx_settings variable in the ~/.vimrc or $HOME/_vimrc file. Replace xxx -with the Vim filetype name for the language file. For example, to modify the -support for the perl language files, you have to set the tlist_perl_settings -variable. To modify the support for java files, you have to set the -tlist_java_settings variable. - -To determine the filetype name used by Vim for a file, use the following -command in the buffer containing the file: - - :set filetype - -The above command will display the Vim filetype for the current buffer. - -The format of the value set in the tlist_xxx_settings variable is - - ;flag1:name1;flag2:name2;flag3:name3 - -The different fields in the value are separated by the ';' character. - -The first field 'language_name' is the name used by exuberant ctags to refer -to this language file. This name can be different from the file type name used -by Vim. For example, for C++, the language name used by ctags is 'c++' but the -filetype name used by Vim is 'cpp'. To get the list of language names -supported by exuberant ctags, use the following command: - - $ ctags --list-maps=all - -The remaining fields follow the format "flag:name". The sub-field 'flag' is -the language specific flag used by exuberant ctags to generate the -corresponding tags. For example, for the C language, to list only the -functions, the 'f' flag is used. To get the list of flags supported by -exuberant ctags for the various languages use the following command: - - $ ctags --list-kinds=all - -The sub-field 'name' specifies the title text to use for displaying the tags -of a particular type. For example, 'name' can be set to 'functions'. This -field can be set to any text string name. - -For example, to list only the classes and functions defined in a C++ language -file, add the following line to your .vimrc file: - - let tlist_cpp_settings = 'c++;c:class;f:function' - -In the above setting, 'cpp' is the Vim filetype name and 'c++' is the name -used by the exuberant ctags tool. 'c' and 'f' are the flags passed to -exuberant ctags to list C++ classes and functions and 'class' is the title -used for the class tags and 'function' is the title used for the function tags -in the taglist window. - -For example, to display only functions defined in a C file and to use "My -Functions" as the title for the function tags, use - - let tlist_c_settings = 'c;f:My Functions' - -When you set the tlist_xxx_settings variable, you will override the default -setting used by the taglist plugin for the 'xxx' language. You cannot add to -the default options used by the taglist plugin for a particular file type. To -add to the options used by the taglist plugin for a language, copy the option -values from the taglist plugin file to your .vimrc file and modify it. - -Adding support for a new language~ -If you want to add support for a new language to the taglist plugin, you need -to first extend the exuberant ctags tool. For more information about extending -exuberant ctags, visit the following page: - - http://ctags.sourceforge.net/EXTENDING.html - -To add support for a new language, set the tlist_xxx_settings variable in the -~/.vimrc file appropriately as described above. Replace 'xxx' in the variable -name with the Vim filetype name for the new language. - -For example, to extend the taglist plugin to support the latex language, you -can use the following line (assuming, you have already extended exuberant -ctags to support the latex language): - - let tlist_tex_settings='latex;b:bibitem;c:command;l:label' - -With the above line, when you edit files of filetype "tex" in Vim, the taglist -plugin will invoke the exuberant ctags tool passing the "latex" filetype and -the flags b, c and l to generate the tags. The text heading 'bibitem', -'command' and 'label' will be used in the taglist window for the tags which -are generated for the flags b, c and l respectively. - -============================================================================== - *taglist-faq* -10. Frequently Asked Questions~ - -Q. The taglist plugin doesn't work. The taglist window is empty and the tags - defined in a file are not displayed. -A. Are you using Vim version 6.0 and above? The taglist plugin relies on the - features supported by Vim version 6.0 and above. You can use the following - command to get the Vim version: -> - $ vim --version -< - Are you using exuberant ctags version 5.0 and above? The taglist plugin - relies on the features supported by exuberant ctags and will not work with - GNU ctags or the Unix ctags utility. You can use the following command to - determine whether the ctags installed in your system is exuberant ctags: -> - $ ctags --version -< - Is exuberant ctags present in one of the directories in your PATH? If not, - you need to set the Tlist_Ctags_Cmd variable to point to the location of - exuberant ctags. Use the following Vim command to verify that this is setup - correctly: -> - :echo system(Tlist_Ctags_Cmd . ' --version') -< - The above command should display the version information for exuberant - ctags. - - Did you turn on the Vim filetype detection? The taglist plugin relies on - the filetype detected by Vim and passes the filetype to the exuberant ctags - utility to parse the tags. Check the output of the following Vim command: -> - :filetype -< - The output of the above command should contain "filetype detection:ON". - To turn on the filetype detection, add the following line to the .vimrc or - _vimrc file: -> - filetype on -< - Is your version of Vim compiled with the support for the system() function? - The following Vim command should display 1: -> - :echo exists('*system') -< - In some Linux distributions (particularly Suse Linux), the default Vim - installation is built without the support for the system() function. The - taglist plugin uses the system() function to invoke the exuberant ctags - utility. You need to rebuild Vim after enabling the support for the - system() function. If you use the default build options, the system() - function will be supported. - - Do you have the |'shellslash'| option set? You can try disabling the - |'shellslash'| option. When the taglist plugin invokes the exuberant ctags - utility with the path to the file, if the incorrect slashes are used, then - you will see errors. - - Check the shell related Vim options values using the following command: -> - :set shell? shellcmdflag? shellpipe? - :set shellquote? shellredir? shellxquote? -< - If these options are set in your .vimrc or _vimrc file, try removing those - lines. - - Are you using a Unix shell in a MS-Windows environment? For example, - the Unix shell from the MKS-toolkit. Do you have the SHELL environment - set to point to this shell? You can try resetting the SHELL environment - variable. - - If you are using a Unix shell on MS-Windows, you should try to use - exuberant ctags that is compiled for Unix-like environments so that - exuberant ctags will understand path names with forward slash characters. - - Is your filetype supported by the exuberant ctags utility? The file types - supported by the exuberant ctags utility are listed in the ctags help. If a - file type is not supported, you have to extend exuberant ctags. You can use - the following command to list the filetypes supported by exuberant ctags: -> - ctags --list-languages -< - Run the following command from the shell prompt and check whether the tags - defined in your file are listed in the output from exuberant ctags: -> - ctags -f - --format=2 --excmd=pattern --fields=nks -< - If you see your tags in the output from the above command, then the - exuberant ctags utility is properly parsing your file. - - Do you have the .ctags or _ctags or the ctags.cnf file in your home - directory for specifying default options or for extending exuberant ctags? - If you do have this file, check the options in this file and make sure - these options are not interfering with the operation of the taglist plugin. - - If you are using MS-Windows, check the value of the TEMP and TMP - environment variables. If these environment variables are set to a path - with space characters in the name, then try using the DOS 8.3 short name - for the path or set them to a path without the space characters in the - name. For example, if the temporary directory name is "C:\Documents and - Settings\xyz\Local Settings\Temp", then try setting the TEMP variable to - the following: -> - set TEMP=C:\DOCUMEN~1\xyz\LOCALS~1\Temp -< - If exuberant ctags is installed in a directory with space characters in the - name, then try adding the directory to the PATH environment variable or try - setting the 'Tlist_Ctags_Cmd' variable to the shortest path name to ctags - or try copying the exuberant ctags to a path without space characters in - the name. For example, if exuberant ctags is installed in the directory - "C:\Program Files\Ctags", then try setting the 'Tlist_Ctags_Cmd' variable - as below: -> - let Tlist_Ctags_Cmd='C:\Progra~1\Ctags\ctags.exe' -< - If you are using a cygwin compiled version of exuberant ctags on MS-Windows, - make sure that either you have the cygwin compiled sort utility installed - and available in your PATH or compile exuberant ctags with internal sort - support. Otherwise, when exuberant ctags sorts the tags output by invoking - the sort utility, it may end up invoking the MS-Windows version of - sort.exe, thereby resulting in failure. - -Q. When I try to open the taglist window, I am seeing the following error - message. How do I fix this problem? - - Taglist: Failed to generate tags for /my/path/to/file - ctags: illegal option -- -^@usage: ctags [-BFadtuwvx] [-f tagsfile] file ... - -A. The taglist plugin will work only with the exuberant ctags tool. You - cannot use the GNU ctags or the Unix ctags program with the taglist plugin. - You will see an error message similar to the one shown above, if you try - use a non-exuberant ctags program with Vim. To fix this problem, either add - the exuberant ctags tool location to the PATH environment variable or set - the 'Tlist_Ctags_Cmd' variable. - -Q. A file has more than one tag with the same name. When I select a tag name - from the taglist window, the cursor is positioned at the incorrect tag - location. -A. The taglist plugin uses the search pattern generated by the exuberant ctags - utility to position the cursor at the location of a tag definition. If a - file has more than one tag with the same name and same prototype, then the - search pattern will be the same. In this case, when searching for the tag - pattern, the cursor may be positioned at the incorrect location. - -Q. I have made some modifications to my file and introduced new - functions/classes/variables. I have not yet saved my file. The taglist - plugin is not displaying the new tags when I update the taglist window. -A. The exuberant ctags utility will process only files that are present in the - disk. To list the tags defined in a file, you have to save the file and - then update the taglist window. - -Q. I have created a ctags file using the exuberant ctags utility for my source - tree. How do I configure the taglist plugin to use this tags file? -A. The taglist plugin doesn't use a tags file stored in disk. For every opened - file, the taglist plugin invokes the exuberant ctags utility to get the - list of tags dynamically. The Vim system() function is used to invoke - exuberant ctags and get the ctags output. This function internally uses a - temporary file to store the output. This file is deleted after the output - from the command is read. So you will never see the file that contains the - output of exuberant ctags. - -Q. When I set the |'updatetime'| option to a low value (less than 1000) and if - I keep pressing a key with the taglist window open, the current buffer - contents are changed. Why is this? -A. The taglist plugin uses the |CursorHold| autocmd to highlight the current - tag. The CursorHold autocmd triggers for every |'updatetime'| milliseconds. - If the |'updatetime'| option is set to a low value, then the CursorHold - autocmd will be triggered frequently. As the taglist plugin changes - the focus to the taglist window to highlight the current tag, this could - interfere with the key movement resulting in changing the contents of - the current buffer. The workaround for this problem is to not set the - |'updatetime'| option to a low value. - -============================================================================== - *taglist-license* -11. License~ -Permission is hereby granted to use and distribute the taglist plugin, with or -without modifications, provided that this copyright notice is copied with it. -Like anything else that's free, taglist.vim is provided *as is* and comes with -no warranty of any kind, either expressed or implied. In no event will the -copyright holder be liable for any damamges resulting from the use of this -software. - -============================================================================== - *taglist-todo* -12. Todo~ - -1. Group tags according to the scope and display them. For example, - group all the tags belonging to a C++/Java class -2. Support for displaying tags in a modified (not-yet-saved) file. -3. Automatically open the taglist window only for selected filetypes. - For other filetypes, close the taglist window. -4. When using the shell from the MKS toolkit, the taglist plugin - doesn't work. -5. The taglist plugin doesn't work with files edited remotely using the - netrw plugin. The exuberant ctags utility cannot process files over - scp/rcp/ftp, etc. - -============================================================================== - -vim:tw=78:ts=8:noet:ft=help: diff --git a/modules/vim/vim.dot.link/doc/tags b/modules/vim/vim.dot.link/doc/tags deleted file mode 100644 index 0726233..0000000 --- a/modules/vim/vim.dot.link/doc/tags +++ /dev/null @@ -1,304 +0,0 @@ -'NERDChristmasTree' NERD_tree.txt /*'NERDChristmasTree'* -'NERDTreeAutoCenter' NERD_tree.txt /*'NERDTreeAutoCenter'* -'NERDTreeAutoCenterThreshold' NERD_tree.txt /*'NERDTreeAutoCenterThreshold'* -'NERDTreeBookmarksFile' NERD_tree.txt /*'NERDTreeBookmarksFile'* -'NERDTreeCaseSensitiveSort' NERD_tree.txt /*'NERDTreeCaseSensitiveSort'* -'NERDTreeChDirMode' NERD_tree.txt /*'NERDTreeChDirMode'* -'NERDTreeHighlightCursorline' NERD_tree.txt /*'NERDTreeHighlightCursorline'* -'NERDTreeHijackNetrw' NERD_tree.txt /*'NERDTreeHijackNetrw'* -'NERDTreeIgnore' NERD_tree.txt /*'NERDTreeIgnore'* -'NERDTreeMouseMode' NERD_tree.txt /*'NERDTreeMouseMode'* -'NERDTreeQuitOnOpen' NERD_tree.txt /*'NERDTreeQuitOnOpen'* -'NERDTreeShowBookmarks' NERD_tree.txt /*'NERDTreeShowBookmarks'* -'NERDTreeShowFiles' NERD_tree.txt /*'NERDTreeShowFiles'* -'NERDTreeShowHidden' NERD_tree.txt /*'NERDTreeShowHidden'* -'NERDTreeShowLineNumbers' NERD_tree.txt /*'NERDTreeShowLineNumbers'* -'NERDTreeSortOrder' NERD_tree.txt /*'NERDTreeSortOrder'* -'NERDTreeStatusline' NERD_tree.txt /*'NERDTreeStatusline'* -'NERDTreeWinPos' NERD_tree.txt /*'NERDTreeWinPos'* -'NERDTreeWinSize' NERD_tree.txt /*'NERDTreeWinSize'* -'Tlist_Auto_Highlight_Tag' taglist.txt /*'Tlist_Auto_Highlight_Tag'* -'Tlist_Auto_Open' taglist.txt /*'Tlist_Auto_Open'* -'Tlist_Auto_Update' taglist.txt /*'Tlist_Auto_Update'* -'Tlist_Close_On_Select' taglist.txt /*'Tlist_Close_On_Select'* -'Tlist_Compact_Format' taglist.txt /*'Tlist_Compact_Format'* -'Tlist_Ctags_Cmd' taglist.txt /*'Tlist_Ctags_Cmd'* -'Tlist_Display_Prototype' taglist.txt /*'Tlist_Display_Prototype'* -'Tlist_Display_Tag_Scope' taglist.txt /*'Tlist_Display_Tag_Scope'* -'Tlist_Enable_Fold_Column' taglist.txt /*'Tlist_Enable_Fold_Column'* -'Tlist_Exit_OnlyWindow' taglist.txt /*'Tlist_Exit_OnlyWindow'* -'Tlist_File_Fold_Auto_Close' taglist.txt /*'Tlist_File_Fold_Auto_Close'* -'Tlist_GainFocus_On_ToggleOpen' taglist.txt /*'Tlist_GainFocus_On_ToggleOpen'* -'Tlist_Highlight_Tag_On_BufEnter' taglist.txt /*'Tlist_Highlight_Tag_On_BufEnter'* -'Tlist_Inc_Winwidth' taglist.txt /*'Tlist_Inc_Winwidth'* -'Tlist_Max_Submenu_Items' taglist.txt /*'Tlist_Max_Submenu_Items'* -'Tlist_Max_Tag_Length' taglist.txt /*'Tlist_Max_Tag_Length'* -'Tlist_Process_File_Always' taglist.txt /*'Tlist_Process_File_Always'* -'Tlist_Show_Menu' taglist.txt /*'Tlist_Show_Menu'* -'Tlist_Show_One_File' taglist.txt /*'Tlist_Show_One_File'* -'Tlist_Sort_Type' taglist.txt /*'Tlist_Sort_Type'* -'Tlist_Use_Horiz_Window' taglist.txt /*'Tlist_Use_Horiz_Window'* -'Tlist_Use_Right_Window' taglist.txt /*'Tlist_Use_Right_Window'* -'Tlist_Use_SingleClick' taglist.txt /*'Tlist_Use_SingleClick'* -'Tlist_WinHeight' taglist.txt /*'Tlist_WinHeight'* -'Tlist_WinWidth' taglist.txt /*'Tlist_WinWidth'* -'loaded_nerd_tree' NERD_tree.txt /*'loaded_nerd_tree'* -'snippets' snipMate.txt /*'snippets'* -.snippet snipMate.txt /*.snippet* -.snippets snipMate.txt /*.snippets* -:CVSEdit vcscommand.txt /*:CVSEdit* -:CVSEditors vcscommand.txt /*:CVSEditors* -:CVSUnedit vcscommand.txt /*:CVSUnedit* -:CVSWatch vcscommand.txt /*:CVSWatch* -:CVSWatchAdd vcscommand.txt /*:CVSWatchAdd* -:CVSWatchOff vcscommand.txt /*:CVSWatchOff* -:CVSWatchOn vcscommand.txt /*:CVSWatchOn* -:CVSWatchRemove vcscommand.txt /*:CVSWatchRemove* -:CVSWatchers vcscommand.txt /*:CVSWatchers* -:NERDTree NERD_tree.txt /*:NERDTree* -:NERDTreeClose NERD_tree.txt /*:NERDTreeClose* -:NERDTreeFind NERD_tree.txt /*:NERDTreeFind* -:NERDTreeFromBookmark NERD_tree.txt /*:NERDTreeFromBookmark* -:NERDTreeMirror NERD_tree.txt /*:NERDTreeMirror* -:NERDTreeToggle NERD_tree.txt /*:NERDTreeToggle* -:TlistAddFiles taglist.txt /*:TlistAddFiles* -:TlistAddFilesRecursive taglist.txt /*:TlistAddFilesRecursive* -:TlistClose taglist.txt /*:TlistClose* -:TlistDebug taglist.txt /*:TlistDebug* -:TlistHighlightTag taglist.txt /*:TlistHighlightTag* -:TlistLock taglist.txt /*:TlistLock* -:TlistMessages taglist.txt /*:TlistMessages* -:TlistOpen taglist.txt /*:TlistOpen* -:TlistSessionLoad taglist.txt /*:TlistSessionLoad* -:TlistSessionSave taglist.txt /*:TlistSessionSave* -:TlistShowPrototype taglist.txt /*:TlistShowPrototype* -:TlistShowTag taglist.txt /*:TlistShowTag* -:TlistToggle taglist.txt /*:TlistToggle* -:TlistUndebug taglist.txt /*:TlistUndebug* -:TlistUnlock taglist.txt /*:TlistUnlock* -:TlistUpdate taglist.txt /*:TlistUpdate* -:VCSAdd vcscommand.txt /*:VCSAdd* -:VCSAnnotate vcscommand.txt /*:VCSAnnotate* -:VCSBlame vcscommand.txt /*:VCSBlame* -:VCSCommit vcscommand.txt /*:VCSCommit* -:VCSDelete vcscommand.txt /*:VCSDelete* -:VCSDiff vcscommand.txt /*:VCSDiff* -:VCSGotoOriginal vcscommand.txt /*:VCSGotoOriginal* -:VCSInfo vcscommand.txt /*:VCSInfo* -:VCSLock vcscommand.txt /*:VCSLock* -:VCSLog vcscommand.txt /*:VCSLog* -:VCSRemove vcscommand.txt /*:VCSRemove* -:VCSRevert vcscommand.txt /*:VCSRevert* -:VCSReview vcscommand.txt /*:VCSReview* -:VCSStatus vcscommand.txt /*:VCSStatus* -:VCSUnlock vcscommand.txt /*:VCSUnlock* -:VCSUpdate vcscommand.txt /*:VCSUpdate* -:VCSVimDiff vcscommand.txt /*:VCSVimDiff* -ExtractSnips() snipMate.txt /*ExtractSnips()* -ExtractSnipsFile() snipMate.txt /*ExtractSnipsFile()* -Filename() snipMate.txt /*Filename()* -NERDTree NERD_tree.txt /*NERDTree* -NERDTree-? NERD_tree.txt /*NERDTree-?* -NERDTree-A NERD_tree.txt /*NERDTree-A* -NERDTree-B NERD_tree.txt /*NERDTree-B* -NERDTree-C NERD_tree.txt /*NERDTree-C* -NERDTree-C-J NERD_tree.txt /*NERDTree-C-J* -NERDTree-C-K NERD_tree.txt /*NERDTree-C-K* -NERDTree-D NERD_tree.txt /*NERDTree-D* -NERDTree-F NERD_tree.txt /*NERDTree-F* -NERDTree-I NERD_tree.txt /*NERDTree-I* -NERDTree-J NERD_tree.txt /*NERDTree-J* -NERDTree-K NERD_tree.txt /*NERDTree-K* -NERDTree-O NERD_tree.txt /*NERDTree-O* -NERDTree-P NERD_tree.txt /*NERDTree-P* -NERDTree-R NERD_tree.txt /*NERDTree-R* -NERDTree-T NERD_tree.txt /*NERDTree-T* -NERDTree-U NERD_tree.txt /*NERDTree-U* -NERDTree-X NERD_tree.txt /*NERDTree-X* -NERDTree-cd NERD_tree.txt /*NERDTree-cd* -NERDTree-contents NERD_tree.txt /*NERDTree-contents* -NERDTree-e NERD_tree.txt /*NERDTree-e* -NERDTree-f NERD_tree.txt /*NERDTree-f* -NERDTree-gi NERD_tree.txt /*NERDTree-gi* -NERDTree-go NERD_tree.txt /*NERDTree-go* -NERDTree-gs NERD_tree.txt /*NERDTree-gs* -NERDTree-i NERD_tree.txt /*NERDTree-i* -NERDTree-m NERD_tree.txt /*NERDTree-m* -NERDTree-o NERD_tree.txt /*NERDTree-o* -NERDTree-p NERD_tree.txt /*NERDTree-p* -NERDTree-q NERD_tree.txt /*NERDTree-q* -NERDTree-r NERD_tree.txt /*NERDTree-r* -NERDTree-s NERD_tree.txt /*NERDTree-s* -NERDTree-t NERD_tree.txt /*NERDTree-t* -NERDTree-u NERD_tree.txt /*NERDTree-u* -NERDTree-x NERD_tree.txt /*NERDTree-x* -NERDTreeAPI NERD_tree.txt /*NERDTreeAPI* -NERDTreeAbout NERD_tree.txt /*NERDTreeAbout* -NERDTreeAddKeyMap() NERD_tree.txt /*NERDTreeAddKeyMap()* -NERDTreeAddMenuItem() NERD_tree.txt /*NERDTreeAddMenuItem()* -NERDTreeAddMenuSeparator() NERD_tree.txt /*NERDTreeAddMenuSeparator()* -NERDTreeAddSubmenu() NERD_tree.txt /*NERDTreeAddSubmenu()* -NERDTreeBookmarkCommands NERD_tree.txt /*NERDTreeBookmarkCommands* -NERDTreeBookmarkTable NERD_tree.txt /*NERDTreeBookmarkTable* -NERDTreeBookmarks NERD_tree.txt /*NERDTreeBookmarks* -NERDTreeChangelog NERD_tree.txt /*NERDTreeChangelog* -NERDTreeCredits NERD_tree.txt /*NERDTreeCredits* -NERDTreeFunctionality NERD_tree.txt /*NERDTreeFunctionality* -NERDTreeGlobalCommands NERD_tree.txt /*NERDTreeGlobalCommands* -NERDTreeInvalidBookmarks NERD_tree.txt /*NERDTreeInvalidBookmarks* -NERDTreeKeymapAPI NERD_tree.txt /*NERDTreeKeymapAPI* -NERDTreeLicense NERD_tree.txt /*NERDTreeLicense* -NERDTreeMappings NERD_tree.txt /*NERDTreeMappings* -NERDTreeMenu NERD_tree.txt /*NERDTreeMenu* -NERDTreeMenuAPI NERD_tree.txt /*NERDTreeMenuAPI* -NERDTreeOptionDetails NERD_tree.txt /*NERDTreeOptionDetails* -NERDTreeOptionSummary NERD_tree.txt /*NERDTreeOptionSummary* -NERDTreeOptions NERD_tree.txt /*NERDTreeOptions* -NERDTreeRender() NERD_tree.txt /*NERDTreeRender()* -NERD_tree.txt NERD_tree.txt /*NERD_tree.txt* -ResetSnippets() snipMate.txt /*ResetSnippets()* -Tlist_Get_Tag_Prototype_By_Line() taglist.txt /*Tlist_Get_Tag_Prototype_By_Line()* -Tlist_Get_Tagname_By_Line() taglist.txt /*Tlist_Get_Tagname_By_Line()* -Tlist_Set_App() taglist.txt /*Tlist_Set_App()* -Tlist_Update_File_Tags() taglist.txt /*Tlist_Update_File_Tags()* -VCSCommandCVSDiffOpt vcscommand.txt /*VCSCommandCVSDiffOpt* -VCSCommandCVSExec vcscommand.txt /*VCSCommandCVSExec* -VCSCommandCommitOnWrite vcscommand.txt /*VCSCommandCommitOnWrite* -VCSCommandDeleteOnHide vcscommand.txt /*VCSCommandDeleteOnHide* -VCSCommandDiffSplit vcscommand.txt /*VCSCommandDiffSplit* -VCSCommandDisableAll vcscommand.txt /*VCSCommandDisableAll* -VCSCommandDisableExtensionMappings vcscommand.txt /*VCSCommandDisableExtensionMappings* -VCSCommandDisableMappings vcscommand.txt /*VCSCommandDisableMappings* -VCSCommandDisableMenu vcscommand.txt /*VCSCommandDisableMenu* -VCSCommandEdit vcscommand.txt /*VCSCommandEdit* -VCSCommandEnableBufferSetup vcscommand.txt /*VCSCommandEnableBufferSetup* -VCSCommandMapPrefix vcscommand.txt /*VCSCommandMapPrefix* -VCSCommandMappings vcscommand.txt /*VCSCommandMappings* -VCSCommandMenuPriority vcscommand.txt /*VCSCommandMenuPriority* -VCSCommandMenuRoot vcscommand.txt /*VCSCommandMenuRoot* -VCSCommandResultBufferNameExtension vcscommand.txt /*VCSCommandResultBufferNameExtension* -VCSCommandResultBufferNameFunction vcscommand.txt /*VCSCommandResultBufferNameFunction* -VCSCommandSVKExec vcscommand.txt /*VCSCommandSVKExec* -VCSCommandSVNDiffExt vcscommand.txt /*VCSCommandSVNDiffExt* -VCSCommandSVNDiffOpt vcscommand.txt /*VCSCommandSVNDiffOpt* -VCSCommandSVNExec vcscommand.txt /*VCSCommandSVNExec* -VCSCommandSplit vcscommand.txt /*VCSCommandSplit* -VCSCommandVCSTypeOverride vcscommand.txt /*VCSCommandVCSTypeOverride* -b:VCSCommandCommand vcscommand.txt /*b:VCSCommandCommand* -b:VCSCommandOriginalBuffer vcscommand.txt /*b:VCSCommandOriginalBuffer* -b:VCSCommandSourceFile vcscommand.txt /*b:VCSCommandSourceFile* -b:VCSCommandVCSType vcscommand.txt /*b:VCSCommandVCSType* -bufexplorer bufexplorer.txt /*bufexplorer* -bufexplorer-changelog bufexplorer.txt /*bufexplorer-changelog* -bufexplorer-credits bufexplorer.txt /*bufexplorer-credits* -bufexplorer-customization bufexplorer.txt /*bufexplorer-customization* -bufexplorer-installation bufexplorer.txt /*bufexplorer-installation* -bufexplorer-todo bufexplorer.txt /*bufexplorer-todo* -bufexplorer-usage bufexplorer.txt /*bufexplorer-usage* -bufexplorer-windowlayout bufexplorer.txt /*bufexplorer-windowlayout* -bufexplorer.txt bufexplorer.txt /*bufexplorer.txt* -buffer-explorer bufexplorer.txt /*buffer-explorer* -cvscommand-changes vcscommand.txt /*cvscommand-changes* -g:bufExplorerChgWin bufexplorer.txt /*g:bufExplorerChgWin* -g:bufExplorerDefaultHelp bufexplorer.txt /*g:bufExplorerDefaultHelp* -g:bufExplorerDetailedHelp bufexplorer.txt /*g:bufExplorerDetailedHelp* -g:bufExplorerFindActive bufexplorer.txt /*g:bufExplorerFindActive* -g:bufExplorerFuncRef bufexplorer.txt /*g:bufExplorerFuncRef* -g:bufExplorerReverseSort bufexplorer.txt /*g:bufExplorerReverseSort* -g:bufExplorerShowDirectories bufexplorer.txt /*g:bufExplorerShowDirectories* -g:bufExplorerShowRelativePath bufexplorer.txt /*g:bufExplorerShowRelativePath* -g:bufExplorerShowTabBuffer bufexplorer.txt /*g:bufExplorerShowTabBuffer* -g:bufExplorerShowUnlisted bufexplorer.txt /*g:bufExplorerShowUnlisted* -g:bufExplorerSortBy bufexplorer.txt /*g:bufExplorerSortBy* -g:bufExplorerSplitBelow bufexplorer.txt /*g:bufExplorerSplitBelow* -g:bufExplorerSplitOutPathName bufexplorer.txt /*g:bufExplorerSplitOutPathName* -g:bufExplorerSplitRight bufexplorer.txt /*g:bufExplorerSplitRight* -g:snippets_dir snipMate.txt /*g:snippets_dir* -g:snips_author snipMate.txt /*g:snips_author* -git-vim git-vim.txt /*git-vim* -git-vim-commands git-vim.txt /*git-vim-commands* -git-vim-contents git-vim.txt /*git-vim-contents* -git-vim-keymaps git-vim.txt /*git-vim-keymaps* -git-vim-license git-vim.txt /*git-vim-license* -git-vim.txt git-vim.txt /*git-vim.txt* -i_CTRL-R_ snipMate.txt /*i_CTRL-R_* -indexer indexer.txt /*indexer* -indexer-commands indexer.txt /*indexer-commands* -indexer-options indexer.txt /*indexer-options* -indexer-plugin indexer.txt /*indexer-plugin* -indexer.txt indexer.txt /*indexer.txt* -list-snippets snipMate.txt /*list-snippets* -multi_snip snipMate.txt /*multi_snip* -project project.txt /*project* -project-adding-mappings project.txt /*project-adding-mappings* -project-example project.txt /*project-example* -project-flags project.txt /*project-flags* -project-inheritance project.txt /*project-inheritance* -project-invoking project.txt /*project-invoking* -project-mappings project.txt /*project-mappings* -project-plugin project.txt /*project-plugin* -project-settings project.txt /*project-settings* -project-syntax project.txt /*project-syntax* -project-tips project.txt /*project-tips* -project.txt project.txt /*project.txt* -snipMate snipMate.txt /*snipMate* -snipMate-$# snipMate.txt /*snipMate-$#* -snipMate-${#:} snipMate.txt /*snipMate-${#:}* -snipMate-${#} snipMate.txt /*snipMate-${#}* -snipMate-author snipMate.txt /*snipMate-author* -snipMate-commands snipMate.txt /*snipMate-commands* -snipMate-contact snipMate.txt /*snipMate-contact* -snipMate-description snipMate.txt /*snipMate-description* -snipMate-disadvantages snipMate.txt /*snipMate-disadvantages* -snipMate-expandtab snipMate.txt /*snipMate-expandtab* -snipMate-features snipMate.txt /*snipMate-features* -snipMate-filename snipMate.txt /*snipMate-filename* -snipMate-indenting snipMate.txt /*snipMate-indenting* -snipMate-placeholders snipMate.txt /*snipMate-placeholders* -snipMate-remap snipMate.txt /*snipMate-remap* -snipMate-settings snipMate.txt /*snipMate-settings* -snipMate-usage snipMate.txt /*snipMate-usage* -snipMate.txt snipMate.txt /*snipMate.txt* -snippet snipMate.txt /*snippet* -snippet-syntax snipMate.txt /*snippet-syntax* -snippets snipMate.txt /*snippets* -taglist-commands taglist.txt /*taglist-commands* -taglist-debug taglist.txt /*taglist-debug* -taglist-extend taglist.txt /*taglist-extend* -taglist-faq taglist.txt /*taglist-faq* -taglist-functions taglist.txt /*taglist-functions* -taglist-install taglist.txt /*taglist-install* -taglist-internet taglist.txt /*taglist-internet* -taglist-intro taglist.txt /*taglist-intro* -taglist-keys taglist.txt /*taglist-keys* -taglist-license taglist.txt /*taglist-license* -taglist-menu taglist.txt /*taglist-menu* -taglist-options taglist.txt /*taglist-options* -taglist-requirements taglist.txt /*taglist-requirements* -taglist-session taglist.txt /*taglist-session* -taglist-todo taglist.txt /*taglist-todo* -taglist-using taglist.txt /*taglist-using* -taglist.txt taglist.txt /*taglist.txt* -vcscommand vcscommand.txt /*vcscommand* -vcscommand-buffer-management vcscommand.txt /*vcscommand-buffer-management* -vcscommand-buffer-variables vcscommand.txt /*vcscommand-buffer-variables* -vcscommand-bugs vcscommand.txt /*vcscommand-bugs* -vcscommand-commands vcscommand.txt /*vcscommand-commands* -vcscommand-config vcscommand.txt /*vcscommand-config* -vcscommand-contents vcscommand.txt /*vcscommand-contents* -vcscommand-customize vcscommand.txt /*vcscommand-customize* -vcscommand-events vcscommand.txt /*vcscommand-events* -vcscommand-install vcscommand.txt /*vcscommand-install* -vcscommand-intro vcscommand.txt /*vcscommand-intro* -vcscommand-manual vcscommand.txt /*vcscommand-manual* -vcscommand-mappings vcscommand.txt /*vcscommand-mappings* -vcscommand-mappings-override vcscommand.txt /*vcscommand-mappings-override* -vcscommand-naming vcscommand.txt /*vcscommand-naming* -vcscommand-options vcscommand.txt /*vcscommand-options* -vcscommand-ssh vcscommand.txt /*vcscommand-ssh* -vcscommand-ssh-config vcscommand.txt /*vcscommand-ssh-config* -vcscommand-ssh-env vcscommand.txt /*vcscommand-ssh-env* -vcscommand-ssh-other vcscommand.txt /*vcscommand-ssh-other* -vcscommand-ssh-wrapper vcscommand.txt /*vcscommand-ssh-wrapper* -vcscommand-statusline vcscommand.txt /*vcscommand-statusline* -vcscommand.txt vcscommand.txt /*vcscommand.txt* diff --git a/modules/vim/vim.dot.link/doc/vcscommand.txt b/modules/vim/vim.dot.link/doc/vcscommand.txt deleted file mode 100644 index 5e0c4c0..0000000 --- a/modules/vim/vim.dot.link/doc/vcscommand.txt +++ /dev/null @@ -1,835 +0,0 @@ -*vcscommand.txt* vcscommand -Copyright (c) Bob Hiestand - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to -deal in the Software without restriction, including without limitation the -rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -sell copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS -IN THE SOFTWARE. - -For instructions on installing this file, type - :help add-local-help -inside Vim. - -Author: Bob Hiestand -Credits: Benji Fisher's excellent MatchIt documentation - -============================================================================== -1. Contents *vcscommand-contents* - - Installation : |vcscommand-install| - vcscommand Intro : |vcscommand| - vcscommand Manual : |vcscommand-manual| - Customization : |vcscommand-customize| - SSH "integration" : |vcscommand-ssh| - Changes from cvscommand : |cvscommand-changes| - Bugs : |vcscommand-bugs| - -============================================================================== - -2. vcscommand Installation *vcscommand-install* - -The vcscommand plugin comprises five files: vcscommand.vim, vcssvn.vim, -vcscvs.vim, vcssvk.vim and vcscommand.txt (this file). In order to install -the plugin, place the vcscommand.vim, vcssvn.vim, vcssvk.vim, and vcscvs.vim -files into a plugin directory in your runtime path (please see -|add-global-plugin| and |'runtimepath'|. - -This help file can be included in the VIM help system by copying it into a -'doc' directory in your runtime path and then executing the |:helptags| -command, specifying the full path of the 'doc' directory. Please see -|add-local-help| for more details. - -vcscommand may be customized by setting variables, creating maps, and -specifying event handlers. Please see |vcscommand-customize| for more -details. - -============================================================================== - -3. vcscommand Intro *vcscommand* - *vcscommand-intro* - -The vcscommand plugin provides global ex commands for manipulating -version-controlled source files, currently those controlled either by CVS or -Subversion. In general, each command operates on the current buffer and -accomplishes a separate source control function, such as update, commit, log, -and others (please see |vcscommand-commands| for a list of all available -commands). The results of each operation are displayed in a scratch buffer. -Several buffer variables are defined for those scratch buffers (please see -|vcscommand-buffer-variables|). - -The notion of "current file" means either the current buffer, or, in the case -of a directory buffer (such as Explorer or netrw buffers), the directory (and -all subdirectories) represented by the the buffer. - -For convenience, any vcscommand invoked on a vcscommand scratch buffer acts as -though it was invoked on the original file and splits the screen so that the -output appears in a new window. - -Many of the commands accept revisions as arguments. By default, most operate -on the most recent revision on the current branch if no revision is specified. - -Each vcscommand is mapped to a key sequence starting with the || -keystroke. The default mappings may be overridden by supplying different -mappings before the plugin is loaded, such as in the vimrc, in the standard -fashion for plugin mappings. For examples, please see -|vcscommand-mappings-override|. - -The vcscommand plugin may be configured in several ways. For more details, -please see |vcscommand-customize|. - -============================================================================== - -4. vcscommand Manual *vcscommand-manual* - -4.1 vcscommand commands *vcscommand-commands* - -vcscommand defines the following commands: - -|:VCSAdd| -|:VCSAnnotate| -|:VCSBlame| -|:VCSCommit| -|:VCSDelete| -|:VCSDiff| -|:VCSGotoOriginal| -|:VCSLog| -|:VCSRemove| -|:VCSRevert| -|:VCSReview| -|:VCSStatus| -|:VCSUpdate| -|:VCSVimDiff| - -The following commands are specific to CVS files: - -|:CVSEdit| -|:CVSEditors| -|:CVSUnedit| -|:CVSWatch| -|:CVSWatchAdd| -|:CVSWatchOn| -|:CVSWatchOff| -|:CVSWatchRemove| -|:CVSWatchers| - -:VCSAdd *:VCSAdd* - -This command adds the current file to source control. Please note, this does -not commit the newly-added file. All parameters to the command are passed to -the underlying VCS. - -:VCSAnnotate[!] *:VCSAnnotate* - -This command displays the current file with each line annotated with the -version in which it was most recently changed. If an argument is given, the -argument is used as a revision number to display. If not given an argument, -it uses the most recent version of the file (on the current branch, if under -CVS control). Additionally, if the current buffer is a VCSAnnotate buffer -already, the version number on the current line is used. - -If '!' is used, the view of the annotated buffer is split so that the -annotation is in a separate window from the content, and each is highlighted -separately. - -For CVS buffers, the 'VCSCommandCVSAnnotateParent' option, if set to non-zero, -will cause the above behavior to change. Instead of annotating the version on -the current line, the parent revision is used instead, crossing branches if -necessary. - -With no arguments the cursor will jump to the line in the annotated buffer -corresponding to the current line in the source buffer. - -:VCSBlame[!] *:VCSBlame* - -Alias for |:VCSAnnotate|. - -:VCSCommit[!] *:VCSCommit* - -This command commits changes to the current file to source control. - -If called with arguments, the arguments are the log message. - -If '!' is used, an empty log message is committed. - -If called with no arguments, this is a two-step command. The first step opens -a buffer to accept a log message. When that buffer is written, it is -automatically closed and the file is committed using the information from that -log message. The commit can be abandoned if the log message buffer is deleted -or wiped before being written. - -Alternatively, the mapping that is used to invoke :VCSCommit (by default -||cc, please see |vcscommand-mappings|) can be used in the log message -buffer in Normal mode to immediately commit. This is useful if the -|VCSCommandCommitOnWrite| variable is set to 0 to disable the normal -commit-on-write behavior. - -:VCSDelete *:VCSDelete* - -Deletes the current file and removes it from source control. All parameters -to the command are passed to the underlying VCS. - -:VCSDiff *:VCSDiff* - -With no arguments, this displays the differences between the current file and -its parent version under source control in a new scratch buffer. - -With one argument, the diff is performed on the current file against the -specified revision. - -With two arguments, the diff is performed between the specified revisions of -the current file. - -For CVS, this command uses the |VCSCommandCVSDiffOpt| variable to specify diff -options. If that variable does not exist, a plugin-specific default is used. -If you wish to have no options, then set it to the empty string. - -For SVN, this command uses the |VCSCommandSVNDiffOpt| variable to specify diff -options. If that variable does not exist, the SVN default is used. -Additionally, |VCSCommandSVNDiffExt| can be used to select an external diff -application. - -:VCSGotoOriginal *:VCSGotoOriginal* - -This command jumps to the source buffer if the current buffer is a VCS scratch -buffer. - -:VCSGotoOriginal! - -Like ":VCSGotoOriginal" but also executes :bufwipeout on all VCS scrach -buffers associated with the original file. - -:VCSInfo *:VCSInfo* - -This command displays extended information about the current file in a new -scratch buffer. - -:VCSLock *:VCSLock* - -This command locks the current file in order to prevent other users from -concurrently modifying it. The exact semantics of this command depend on the -underlying VCS. This does nothing in CVS. All parameters are passed to the -underlying VCS. - -:VCSLog *:VCSLog* - -Displays the version history of the current file in a new scratch buffer. If -there is one parameter supplied, it is taken as as a revision parameters to be -passed through to the underlying VCS. Otherwise, all parameters are passed to -the underlying VCS. - -:VCSRemove *:VCSRemove* - -Alias for |:VCSDelete|. - -:VCSRevert *:VCSRevert* - -This command replaces the current file with the most recent version from the -repository in order to wipe out any undesired changes. - -:VCSReview *:VCSReview* - -Displays a particular version of the current file in a new scratch buffer. If -no argument is given, the most recent version of the file on the current -branch is retrieved. - -:VCSStatus *:VCSStatus* - -Displays versioning information about the current file in a new scratch -buffer. All parameters are passed to the underlying VCS. - - -:VCSUnlock *:VCSUnlock* - -Unlocks the current file in order to allow other users from concurrently -modifying it. The exact semantics of this command depend on the underlying -VCS. All parameters are passed to the underlying VCS. - -:VCSUpdate *:VCSUpdate* - -Updates the current file with any relevant changes from the repository. This -intentionally does not automatically reload the current buffer, though vim -should prompt the user to do so if the underlying file is altered by this -command. - -:VCSVimDiff *:VCSVimDiff* - -Uses vimdiff to display differences between versions of the current file. - -If no revision is specified, the most recent version of the file on the -current branch is used. With one argument, that argument is used as the -revision as above. With two arguments, the differences between the two -revisions is displayed using vimdiff. - -With either zero or one argument, the original buffer is used to perform the -vimdiff. When the scratch buffer is closed, the original buffer will be -returned to normal mode. - -Once vimdiff mode is started using the above methods, additional vimdiff -buffers may be added by passing a single version argument to the command. -There may be up to 4 vimdiff buffers total. - -Using the 2-argument form of the command resets the vimdiff to only those 2 -versions. Additionally, invoking the command on a different file will close -the previous vimdiff buffers. - -:CVSEdit *:CVSEdit* - -This command performs "cvs edit" on the current file. Yes, the output buffer -in this case is almost completely useless. - -:CVSEditors *:CVSEditors* - -This command performs "cvs edit" on the current file. - -:CVSUnedit *:CVSUnedit* - -Performs "cvs unedit" on the current file. Again, yes, the output buffer here -is basically useless. - -:CVSWatch *:CVSWatch* - -This command takes an argument which must be one of [on|off|add|remove]. The -command performs "cvs watch" with the given argument on the current file. - -:CVSWatchAdd *:CVSWatchAdd* - -This command is an alias for ":CVSWatch add" - -:CVSWatchOn *:CVSWatchOn* - -This command is an alias for ":CVSWatch on" - -:CVSWatchOff *:CVSWatchOff* - -This command is an alias for ":CVSWatch off" - -:CVSWatchRemove *:CVSWatchRemove* - -This command is an alias for ":CVSWatch remove" - -:CVSWatchers *:CVSWatchers* - -This command performs "cvs watchers" on the current file. - -4.2 Mappings *vcscommand-mappings* - -By default, a mapping is defined for each command. These mappings execute the -default (no-argument) form of each command. - -||ca VCSAdd -||cn VCSAnnotate -||cN VCSAnnotate! -||cc VCSCommit -||cD VCSDelete -||cd VCSDiff -||cg VCSGotoOriginal -||cG VCSGotoOriginal! -||ci VCSInfo -||cl VCSLog -||cL VCSLock -||cr VCSReview -||cs VCSStatus -||cu VCSUpdate -||cU VCSUnlock -||cv VCSVimDiff - -Only for CVS buffers: - -||ce CVSEdit -||cE CVSEditors -||ct CVSUnedit -||cwv CVSWatchers -||cwa CVSWatchAdd -||cwn CVSWatchOn -||cwf CVSWatchOff -||cwf CVSWatchRemove - - *vcscommand-mappings-override* - -The default mappings can be overridden by user-provided instead by mapping to -CommandName. This is especially useful when these mappings collide with -other existing mappings (vim will warn of this during plugin initialization, -but will not clobber the existing mappings). - -There are three methods for controlling mapping: - -First, maps can be overriden for individual commands. For instance, to -override the default mapping for :VCSAdd to set it to '\add', add the -following to the vimrc: - -nmap \add VCSAdd - -Second, the default map prefix ('c') can be overridden by defining the -|VCSCommandMapPrefix| variable. - -Third, the entire set of default maps can be overridden by defining the -|VCSCommandMappings| variable. - - -4.3 Automatic buffer variables *vcscommand-buffer-variables* - -Several buffer variables are defined in each vcscommand result buffer. These -may be useful for additional customization in callbacks defined in the event -handlers (please see |vcscommand-events|). - -The following variables are automatically defined: - -b:VCSCommandOriginalBuffer *b:VCSCommandOriginalBuffer* - -This variable is set to the buffer number of the source file. - -b:VCSCommandCommand *b:VCSCommandCommand* - -This variable is set to the name of the vcscommand that created the result -buffer. - -b:VCSCommandSourceFile *b:VCSCommandSourceFile* - -This variable is set to the name of the original file under source control. - -b:VCSCommandVCSType *b:VCSCommandVCSType* - -This variable is set to the type of the source control. This variable is also -set on the original file itself. -============================================================================== - -5. Configuration and customization *vcscommand-customize* - *vcscommand-config* - -The vcscommand plugin can be configured in several ways: by setting -configuration variables (see |vcscommand-options|) or by defining vcscommand -event handlers (see |vcscommand-events|). Additionally, the vcscommand plugin -supports a customized status line (see |vcscommand-statusline| and -|vcscommand-buffer-management|). - -5.1 vcscommand configuration variables *vcscommand-options* - -Several variables affect the plugin's behavior. These variables are checked -at time of execution, and may be defined at the window, buffer, or global -level and are checked in that order of precedence. - - -The following variables are available: - -|VCSCommandCommitOnWrite| -|VCSCommandCVSDiffOpt| -|VCSCommandCVSExec| -|VCSCommandDeleteOnHide| -|VCSCommandDiffSplit| -|VCSCommandDisableAll| -|VCSCommandDisableMappings| -|VCSCommandDisableExtensionMappings| -|VCSCommandDisableMenu| -|VCSCommandEdit| -|VCSCommandEnableBufferSetup| -|VCSCommandMappings| -|VCSCommandMapPrefix| -|VCSCommandMenuPriority| -|VCSCommandMenuRoot| -|VCSCommandResultBufferNameExtension| -|VCSCommandResultBufferNameFunction| -|VCSCommandSplit| -|VCSCommandSVKExec| -|VCSCommandSVNDiffExt| -|VCSCommandSVNDiffOpt| -|VCSCommandSVNExec| -|VCSCommandVCSTypeOverride| - -VCSCommandCommitOnWrite *VCSCommandCommitOnWrite* - -This variable, if set to a non-zero value, causes the pending commit -to take place immediately as soon as the log message buffer is written. -If set to zero, only the VCSCommit mapping will cause the pending commit to -occur. If not set, it defaults to 1. - -VCSCommandCVSExec *VCSCommandCVSExec* - -This variable controls the executable used for all CVS commands If not set, -it defaults to "cvs". - -VCSCommandDeleteOnHide *VCSCommandDeleteOnHide* - -This variable, if set to a non-zero value, causes the temporary result buffers -to automatically delete themselves when hidden. - -VCSCommandCVSDiffOpt *VCSCommandCVSDiffOpt* - -This variable, if set, determines the options passed to the diff command of -CVS. If not set, it defaults to 'u'. - -VCSCommandDiffSplit *VCSCommandDiffSplit* - -This variable overrides the |VCSCommandSplit| variable, but only for buffers -created with |:VCSVimDiff|. - -VCSCommandDisableAll *VCSCommandDisableAll* - -This variable, if set, prevents the plugin or any extensions from loading at -all. This is useful when a single runtime distribution is used on multiple -systems with varying versions. - -VCSCommandDisableMappings *VCSCommandDisableMappings* - -This variable, if set to a non-zero value, prevents the default command -mappings from being set. This supercedes -|VCSCommandDisableExtensionMappings|. - -VCSCommandDisableExtensionMappings *VCSCommandDisableExtensionMappings* - -This variable, if set to a non-zero value, prevents the default command -mappings from being set for commands specific to an individual VCS. - -VCSCommandEdit *VCSCommandEdit* - -This variable controls whether the original buffer is replaced ('edit') or -split ('split'). If not set, it defaults to 'split'. - -VCSCommandDisableMenu *VCSCommandDisableMenu* - -This variable, if set to a non-zero value, prevents the default command menu -from being set. - -VCSCommandEnableBufferSetup *VCSCommandEnableBufferSetup* - -This variable, if set to a non-zero value, activates VCS buffer management -mode see (|vcscommand-buffer-management|). This mode means that the -'VCSCommandBufferInfo' variable is filled with version information if the file -is VCS-controlled. This is useful for displaying version information in the -status bar. - -VCSCommandMappings *VCSCommandMappings* - -This variable, if set, overrides the default mappings used for shortcuts. It -should be a List of 2-element Lists, each containing a shortcut and function -name pair. The value of the '|VCSCommandMapPrefix|' variable will be added to -each shortcut. - -VCSCommandMapPrefix *VCSCommandMapPrefix* - -This variable, if set, overrides the default mapping prefix ('c'). -This allows customization of the mapping space used by the vcscommand -shortcuts. - -VCSCommandMenuPriority *VCSCommandMenuPriority* - -This variable, if set, overrides the default menu priority '' (empty) - -VCSCommandMenuRoot *VCSCommandMenuRoot* - -This variable, if set, overrides the default menu root 'Plugin.VCS' - -VCSCommandResultBufferNameExtension *VCSCommandResultBufferNameExtension* - -This variable, if set to a non-blank value, is appended to the name of the VCS -command output buffers. For example, '.vcs'. Using this option may help -avoid problems caused by autocommands dependent on file extension. - -VCSCommandResultBufferNameFunction *VCSCommandResultBufferNameFunction* - -This variable, if set, specifies a custom function for naming VCS command -output buffers. This function is expected to return the new buffer name, and -will be passed the following arguments: - - command - name of the VCS command being executed (such as 'Log' or - 'Diff'). - - originalBuffer - buffer number of the source file. - - vcsType - type of VCS controlling this file (such as 'CVS' or 'SVN'). - - statusText - extra text associated with the VCS action (such as version - numbers). - -VCSCommandSplit *VCSCommandSplit* - -This variable controls the orientation of the various window splits that -may occur. - -If set to 'horizontal', the resulting windows will be on stacked on top of -one another. If set to 'vertical', the resulting windows will be -side-by-side. If not set, it defaults to 'horizontal' for all but -VCSVimDiff windows. VCSVimDiff windows default to the user's 'diffopt' -setting, if set, otherwise 'vertical'. - -VCSCommandSVKExec *VCSCommandSVKExec* - -This variable controls the executable used for all SVK commands If not set, -it defaults to "svk". - -VCSCommandSVNDiffExt *VCSCommandSVNDiffExt* - -This variable, if set, is passed to SVN via the --diff-cmd command to select -an external application for performing the diff. - -VCSCommandSVNDiffOpt *VCSCommandSVNDiffOpt* - -This variable, if set, determines the options passed with the '-x' parameter -to the SVN diff command. If not set, no options are passed. - -VCSCommandSVNExec *VCSCommandSVNExec* - -This variable controls the executable used for all SVN commands If not set, -it defaults to "svn". - -VCSCommandVCSTypeOverride *VCSCommandVCSTypeOverride* - -This variable allows the VCS type detection to be overridden on a path-by-path -basis. The value of this variable is expected to be a List of Lists. Each -item in the high-level List is a List containing two elements. The first -element is a regular expression that will be matched against the full file -name of a given buffer. If it matches, the second element will be used as the -VCS type. - -5.2 VCSCommand events *vcscommand-events* - -For additional customization, vcscommand can trigger user-defined events. -Event handlers are provided by defining User event autocommands (see -|autocommand|, |User|) in the vcscommand group with patterns matching the -event name. - -For instance, the following could be added to the vimrc to provide a 'q' -mapping to quit a vcscommand scratch buffer: - -augroup VCSCommand - au User VCSBufferCreated silent! nmap q :bwipeout -augroup END - -The following hooks are available: - -VCSBufferCreated This event is fired just after a vcscommand - result buffer is created and populated. It is - executed within the context of the vcscommand - buffer. The vcscommand buffer variables may - be useful for handlers of this event (please - see |vcscommand-buffer-variables|). - -VCSBufferSetup This event is fired just after vcscommand buffer - setup occurs, if enabled. - -VCSPluginInit This event is fired when the vcscommand plugin - first loads. - -VCSPluginFinish This event is fired just after the vcscommand - plugin loads. - -VCSVimDiffFinish This event is fired just after the VCSVimDiff - command executes to allow customization of, - for instance, window placement and focus. - -Additionally, there is another hook which is used internally to handle loading -the multiple scripts in order. This hook should probably not be used by an -end user without a good idea of how it works. Among other things, any events -associated with this hook are cleared after they are executed (during -vcscommand.vim script initialization). - -VCSLoadExtensions This event is fired just before the - VCSPluginFinish. It is used internally to - execute any commands from the VCS - implementation plugins that needs to be - deferred until the primary plugin is - initialized. - -5.3 vcscommand buffer naming *vcscommand-naming* - -vcscommand result buffers use the following naming convention: -[{VCS type} {VCS command} {Source file name}] - -If additional buffers are created that would otherwise conflict, a -distinguishing number is added: - -[{VCS type} {VCS command} {Source file name}] (1,2, etc) - -5.4 vcscommand status line support *vcscommand-statusline* - -It is intended that the user will customize the |'statusline'| option to -include vcscommand result buffer attributes. A sample function that may be -used in the |'statusline'| option is provided by the plugin, -VCSCommandGetStatusLine(). In order to use that function in the status line, do -something like the following: - -set statusline=%<%f\ %{VCSCommandGetStatusLine()}\ %h%m%r%=%l,%c%V\ %P - -of which %{VCSCommandGetStatusLine()} is the relevant portion. - -The sample VCSCommandGetStatusLine() function handles both vcscommand result -buffers and VCS-managed files if vcscommand buffer management is enabled -(please see |vcscommand-buffer-management|). - -5.5 vcscommand buffer management *vcscommand-buffer-management* - -The vcscommand plugin can operate in buffer management mode, which means that -it attempts to set a buffer variable ('VCSCommandBufferInfo') upon entry into -a buffer. This is rather slow because it means that the VCS will be invoked -at each entry into a buffer (during the |BufEnter| autocommand). - -This mode is disabled by default. In order to enable it, set the -|VCSCommandEnableBufferSetup| variable to a true (non-zero) value. Enabling -this mode simply provides the buffer variable mentioned above. The user must -explicitly include information from the variable in the |'statusline'| option -if they are to appear in the status line (but see |vcscommand-statusline| for -a simple way to do that). - -The 'VCSCommandBufferInfo' variable is a list which contains, in order, the -revision of the current file, the latest revision of the file in the -repository, and (for CVS) the name of the branch. If those values cannot be -determined, the list is a single element: 'Unknown'. - -============================================================================== - -6. SSH "integration" *vcscommand-ssh* - -The following instructions are intended for use in integrating the -vcscommand.vim plugin with an SSH-based CVS environment. - -Familiarity with SSH and CVS are assumed. - -These instructions assume that the intent is to have a message box pop up in -order to allow the user to enter a passphrase. If, instead, the user is -comfortable using certificate-based authentication, then only instructions -6.1.1 and 6.1.2 (and optionally 6.1.4) need to be followed; ssh should then -work transparently. - -6.1 Environment settings *vcscommand-ssh-env* - -6.1.1 CVSROOT should be set to something like: - - :ext:user@host:/path_to_repository - -6.1.2 CVS_RSH should be set to: - - ssh - - Together, those settings tell CVS to use ssh as the transport when - performing CVS calls. - -6.1.3 SSH_ASKPASS should be set to the password-dialog program. In my case, - running gnome, it's set to: - - /usr/libexec/openssh/gnome-ssh-askpass - - This tells SSH how to get passwords if no input is available. - -6.1.4 OPTIONAL. You may need to set SSH_SERVER to the location of the cvs - executable on the remote (server) machine. - -6.2 CVS wrapper program *vcscommand-ssh-wrapper* - -Now you need to convince SSH to use the password-dialog program. This means -you need to execute SSH (and therefore CVS) without standard input. The -following script is a simple perl wrapper that dissasociates the CVS command -from the current terminal. Specific steps to do this may vary from system to -system; the following example works for me on linux. - -#!/usr/bin/perl -w -use strict; -use POSIX qw(setsid); -open STDIN, '/dev/null'; -fork and do {wait; exit;}; -setsid; -exec('cvs', @ARGV); - -6.3 Configuring vcscommand.vim *vcscommand-ssh-config* - -At this point, you should be able to use your wrapper script to invoke CVS with -various commands, and get the password dialog. All that's left is to make CVS -use your newly-created wrapper script. - -6.3.1 Tell vcscommand.vim what CVS executable to use. The easiest way to do this - is globally, by putting the following in your .vimrc: - - let VCSCommandCVSExec=/path/to/cvs/wrapper/script - -6.4 Where to go from here *vcscommand-ssh-other* - -The script given above works even when non-SSH CVS connections are used, -except possibly when interactively entering the message for CVS commit log -(depending on the editor you use... VIM works fine). Since the vcscommand.vim -plugin handles that message without a terminal, the wrapper script can be used -all the time. - -This allows mixed-mode operation, where some work is done with SSH-based CVS -repositories, and others with pserver or local access. - -It is possible, though beyond the scope of the plugin, to dynamically set the -CVS executable based on the CVSROOT for the file being edited. The user -events provided (such as VCSBufferCreated and VCSBufferSetup) can be used to -set a buffer-local value (b:VCSCommandCVSExec) to override the CVS executable -on a file-by-file basis. Alternatively, much the same can be done (less -automatically) by the various project-oriented plugins out there. - -It is highly recommended for ease-of-use that certificates with no passphrase -or ssh-agent are employed so that the user is not given the password prompt -too often. - -============================================================================== - -7. Changes from cvscommand *cvscommand-changes* - -1. Require Vim 7 in order to leverage several convenient features; also -because I wanted to play with Vim 7. - -2. Renamed commands to start with 'VCS' instead of 'CVS'. The exceptions are -the 'CVSEdit' and 'CVSWatch' family of commands, which are specific to CVS. - -3. Renamed options, events to start with 'VCSCommand'. - -4. Removed option to jump to the parent version of the current line in an -annotated buffer, as opposed to the version on the current line. This made -little sense in the branching scheme used by subversion, where jumping to a -parent branch required finding a different location in the repository. It -didn't work consistently in CVS anyway. - -5. Removed option to have nameless scratch buffers. - -6. Changed default behavior of scratch buffers to split the window instead of -displaying in the current window. This may still be overridden using the -'VCSCommandEdit' option. - -7. Split plugin into multiple plugins. - -8. Added 'VCSLock' and 'VCSUnlock' commands. These are implemented for -subversion but not for CVS. These were not kept specific to subversion as they -seemed more general in nature and more likely to be supported by any future VCS -supported by this plugin. - -9. Changed name of buffer variables set by commands. - -'b:cvsOrigBuffNR' became 'b:VCSCommandOriginalBuffer' -'b:cvscmd' became 'b:VCSCommandCommand' - -10. Added new automatic variables to command result buffers. - -'b:VCSCommandSourceFile' -'b:VCSCommandVCSType' - -============================================================================== - -8. Known bugs *vcscommand-bugs* - -Please let me know if you run across any. - -CVSUnedit may, if a file is changed from the repository, provide prompt text -to determine whether the changes should be thrown away. Currently, that text -shows up in the CVS result buffer as information; there is no way for the user -to actually respond to the prompt and the CVS unedit command does nothing. If -this really bothers anyone, please let me know. - -VCSVimDiff, when using the original (real) source buffer as one of the diff -buffers, uses some hacks to try to restore the state of the original buffer -when the scratch buffer containing the other version is destroyed. There may -still be bugs in here, depending on many configuration details. - -vim:tw=78:ts=8:ft=help -- cgit v1.2.3