From 6b9187673ee62d11042832f938913f15131592a7 Mon Sep 17 00:00:00 2001 From: Silvio Rhatto Date: Fri, 1 Feb 2013 01:25:10 -0200 Subject: Adding metadot script --- modules/vim/vim.dot.link/doc/NERD_tree.txt | 1222 +++++++++++++++++++++ modules/vim/vim.dot.link/doc/bufexplorer.txt | 547 ++++++++++ modules/vim/vim.dot.link/doc/git-vim.txt | 95 ++ modules/vim/vim.dot.link/doc/indexer.txt | 211 ++++ modules/vim/vim.dot.link/doc/project.txt | 710 ++++++++++++ modules/vim/vim.dot.link/doc/snipMate.txt | 286 +++++ modules/vim/vim.dot.link/doc/taglist.txt | 1501 ++++++++++++++++++++++++++ modules/vim/vim.dot.link/doc/tags | 304 ++++++ modules/vim/vim.dot.link/doc/vcscommand.txt | 835 ++++++++++++++ 9 files changed, 5711 insertions(+) create mode 100644 modules/vim/vim.dot.link/doc/NERD_tree.txt create mode 100644 modules/vim/vim.dot.link/doc/bufexplorer.txt create mode 100644 modules/vim/vim.dot.link/doc/git-vim.txt create mode 100644 modules/vim/vim.dot.link/doc/indexer.txt create mode 100644 modules/vim/vim.dot.link/doc/project.txt create mode 100644 modules/vim/vim.dot.link/doc/snipMate.txt create mode 100755 modules/vim/vim.dot.link/doc/taglist.txt create mode 100644 modules/vim/vim.dot.link/doc/tags create mode 100644 modules/vim/vim.dot.link/doc/vcscommand.txt (limited to 'modules/vim/vim.dot.link/doc') diff --git a/modules/vim/vim.dot.link/doc/NERD_tree.txt b/modules/vim/vim.dot.link/doc/NERD_tree.txt new file mode 100644 index 0000000..2e2278c --- /dev/null +++ b/modules/vim/vim.dot.link/doc/NERD_tree.txt @@ -0,0 +1,1222 @@ +*NERD_tree.txt* A tree explorer plugin that owns your momma! + + + + omg its ... ~ + + ________ ________ _ ____________ ____ __________ ____________~ + /_ __/ / / / ____/ / | / / ____/ __ \/ __ \ /_ __/ __ \/ ____/ ____/~ + / / / /_/ / __/ / |/ / __/ / /_/ / / / / / / / /_/ / __/ / __/ ~ + / / / __ / /___ / /| / /___/ _, _/ /_/ / / / / _, _/ /___/ /___ ~ + /_/ /_/ /_/_____/ /_/ |_/_____/_/ |_/_____/ /_/ /_/ |_/_____/_____/ ~ + + + Reference Manual~ + + + + +============================================================================== +CONTENTS *NERDTree-contents* + + 1.Intro...................................|NERDTree| + 2.Functionality provided..................|NERDTreeFunctionality| + 2.1.Global commands...................|NERDTreeGlobalCommands| + 2.2.Bookmarks.........................|NERDTreeBookmarks| + 2.2.1.The bookmark table..........|NERDTreeBookmarkTable| + 2.2.2.Bookmark commands...........|NERDTreeBookmarkCommands| + 2.2.3.Invalid bookmarks...........|NERDTreeInvalidBookmarks| + 2.3.NERD tree mappings................|NERDTreeMappings| + 2.4.The NERD tree menu................|NERDTreeMenu| + 3.Options.................................|NERDTreeOptions| + 3.1.Option summary....................|NERDTreeOptionSummary| + 3.2.Option details....................|NERDTreeOptionDetails| + 4.The NERD tree API.......................|NERDTreeAPI| + 4.1.Key map API.......................|NERDTreeKeymapAPI| + 4.2.Menu API..........................|NERDTreeMenuAPI| + 5.About...................................|NERDTreeAbout| + 6.Changelog...............................|NERDTreeChangelog| + 7.Credits.................................|NERDTreeCredits| + 8.License.................................|NERDTreeLicense| + +============================================================================== +1. Intro *NERDTree* + +What is this "NERD tree"?? + +The NERD tree allows you to explore your filesystem and to open files and +directories. It presents the filesystem to you in the form of a tree which you +manipulate with the keyboard and/or mouse. It also allows you to perform +simple filesystem operations. + +The following features and functionality are provided by the NERD tree: + * Files and directories are displayed in a hierarchical tree structure + * Different highlighting is provided for the following types of nodes: + * files + * directories + * sym-links + * windows .lnk files + * read-only files + * executable files + * Many (customisable) mappings are provided to manipulate the tree: + * Mappings to open/close/explore directory nodes + * Mappings to open files in new/existing windows/tabs + * Mappings to change the current root of the tree + * Mappings to navigate around the tree + * ... + * Directories and files can be bookmarked. + * Most NERD tree navigation can also be done with the mouse + * Filtering of tree content (can be toggled at runtime) + * custom file filters to prevent e.g. vim backup files being displayed + * optional displaying of hidden files (. files) + * files can be "turned off" so that only directories are displayed + * The position and size of the NERD tree window can be customised + * The order in which the nodes in the tree are listed can be customised. + * A model of your filesystem is created/maintained as you explore it. This + has several advantages: + * All filesystem information is cached and is only re-read on demand + * If you revisit a part of the tree that you left earlier in your + session, the directory nodes will be opened/closed as you left them + * The script remembers the cursor position and window position in the NERD + tree so you can toggle it off (or just close the tree window) and then + reopen it (with NERDTreeToggle) the NERD tree window will appear exactly + as you left it + * You can have a separate NERD tree for each tab, share trees across tabs, + or a mix of both. + * By default the script overrides the default file browser (netw), so if + you :edit a directory a (slighly modified) NERD tree will appear in the + current window + * A programmable menu system is provided (simulates right clicking on a + node) + * one default menu plugin is provided to perform basic filesytem + operations (create/delete/move/copy files/directories) + * There's an API for adding your own keymappings + + +============================================================================== +2. Functionality provided *NERDTreeFunctionality* + +------------------------------------------------------------------------------ +2.1. Global Commands *NERDTreeGlobalCommands* + +:NERDTree [ | ] *:NERDTree* + Opens a fresh NERD tree. The root of the tree depends on the argument + given. There are 3 cases: If no argument is given, the current directory + will be used. If a directory is given, that will be used. If a bookmark + name is given, the corresponding directory will be used. For example: > + :NERDTree /home/marty/vim7/src + :NERDTree foo (foo is the name of a bookmark) +< +:NERDTreeFromBookmark *:NERDTreeFromBookmark* + Opens a fresh NERD tree with the root initialized to the dir for + . This only reason to use this command over :NERDTree is for + the completion (which is for bookmarks rather than directories). + +:NERDTreeToggle [ | ] *:NERDTreeToggle* + If a NERD tree already exists for this tab, it is reopened and rendered + again. If no NERD tree exists for this tab then this command acts the + same as the |:NERDTree| command. + +:NERDTreeMirror *:NERDTreeMirror* + Shares an existing NERD tree, from another tab, in the current tab. + Changes made to one tree are reflected in both as they are actually the + same buffer. + + If only one other NERD tree exists, that tree is automatically mirrored. If + more than one exists, the script will ask which tree to mirror. + +:NERDTreeClose *:NERDTreeClose* + Close the NERD tree in this tab. + +:NERDTreeFind *:NERDTreeFind* + Find the current file in the tree. If no tree exists for the current tab, + or the file is not under the current root, then initialize a new tree where + the root is the directory of the current file. + +------------------------------------------------------------------------------ +2.2. Bookmarks *NERDTreeBookmarks* + +Bookmarks in the NERD tree are a way to tag files or directories of interest. +For example, you could use bookmarks to tag all of your project directories. + +------------------------------------------------------------------------------ +2.2.1. The Bookmark Table *NERDTreeBookmarkTable* + +If the bookmark table is active (see |NERDTree-B| and +|'NERDTreeShowBookmarks'|), it will be rendered above the tree. You can double +click bookmarks or use the |NERDTree-o| mapping to activate them. See also, +|NERDTree-t| and |NERDTree-T| + +------------------------------------------------------------------------------ +2.2.2. Bookmark commands *NERDTreeBookmarkCommands* + +Note that the following commands are only available in the NERD tree buffer. + +:Bookmark + Bookmark the current node as . If there is already a + bookmark, it is overwritten. must not contain spaces. + +:BookmarkToRoot + Make the directory corresponding to the new root. If a treenode + corresponding to is already cached somewhere in the tree then + the current tree will be used, otherwise a fresh tree will be opened. + Note that if points to a file then its parent will be used + instead. + +:RevealBookmark + If the node is cached under the current root then it will be revealed + (i.e. directory nodes above it will be opened) and the cursor will be + placed on it. + +:OpenBookmark + must point to a file. The file is opened as though |NERDTree-o| + was applied. If the node is cached under the current root then it will be + revealed and the cursor will be placed on it. + +:ClearBookmarks [] + Remove all the given bookmarks. If no bookmarks are given then remove all + bookmarks on the current node. + +:ClearAllBookmarks + Remove all bookmarks. + +:ReadBookmarks + Re-read the bookmarks in the |'NERDTreeBookmarksFile'|. + +See also |:NERDTree| and |:NERDTreeFromBookmark|. + +------------------------------------------------------------------------------ +2.2.3. Invalid Bookmarks *NERDTreeInvalidBookmarks* + +If invalid bookmarks are detected, the script will issue an error message and +the invalid bookmarks will become unavailable for use. + +These bookmarks will still be stored in the bookmarks file (see +|'NERDTreeBookmarksFile'|), down the bottom. There will always be a blank line +after the valid bookmarks but before the invalid ones. + +Each line in the bookmarks file represents one bookmark. The proper format is: + + +After you have corrected any invalid bookmarks, either restart vim, or go +:ReadBookmarks from the NERD tree window. + +------------------------------------------------------------------------------ +2.3. NERD tree Mappings *NERDTreeMappings* + +Default Description~ help-tag~ +Key~ + +o.......Open files, directories and bookmarks....................|NERDTree-o| +go......Open selected file, but leave cursor in the NERDTree.....|NERDTree-go| +t.......Open selected node/bookmark in a new tab.................|NERDTree-t| +T.......Same as 't' but keep the focus on the current tab........|NERDTree-T| +i.......Open selected file in a split window.....................|NERDTree-i| +gi......Same as i, but leave the cursor on the NERDTree..........|NERDTree-gi| +s.......Open selected file in a new vsplit.......................|NERDTree-s| +gs......Same as s, but leave the cursor on the NERDTree..........|NERDTree-gs| +O.......Recursively open the selected directory..................|NERDTree-O| +x.......Close the current nodes parent...........................|NERDTree-x| +X.......Recursively close all children of the current node.......|NERDTree-X| +e.......Edit the current dif.....................................|NERDTree-e| + +...............same as |NERDTree-o|. +double-click.......same as the |NERDTree-o| map. +middle-click.......same as |NERDTree-i| for files, same as + |NERDTree-e| for dirs. + +D.......Delete the current bookmark .............................|NERDTree-D| + +P.......Jump to the root node....................................|NERDTree-P| +p.......Jump to current nodes parent.............................|NERDTree-p| +K.......Jump up inside directories at the current tree depth.....|NERDTree-K| +J.......Jump down inside directories at the current tree depth...|NERDTree-J| +...Jump down to the next sibling of the current directory...|NERDTree-C-J| +...Jump up to the previous sibling of the current directory.|NERDTree-C-K| + +C.......Change the tree root to the selected dir.................|NERDTree-C| +u.......Move the tree root up one directory......................|NERDTree-u| +U.......Same as 'u' except the old root node is left open........|NERDTree-U| +r.......Recursively refresh the current directory................|NERDTree-r| +R.......Recursively refresh the current root.....................|NERDTree-R| +m.......Display the NERD tree menu...............................|NERDTree-m| +cd......Change the CWD to the dir of the selected node...........|NERDTree-cd| + +I.......Toggle whether hidden files displayed....................|NERDTree-I| +f.......Toggle whether the file filters are used.................|NERDTree-f| +F.......Toggle whether files are displayed.......................|NERDTree-F| +B.......Toggle whether the bookmark table is displayed...........|NERDTree-B| + +q.......Close the NERDTree window................................|NERDTree-q| +A.......Zoom (maximize/minimize) the NERDTree window.............|NERDTree-A| +?.......Toggle the display of the quick help.....................|NERDTree-?| + +------------------------------------------------------------------------------ + *NERDTree-o* +Default key: o +Map option: NERDTreeMapActivateNode +Applies to: files and directories. + +If a file node is selected, it is opened in the previous window. + +If a directory is selected it is opened or closed depending on its current +state. + +If a bookmark that links to a directory is selected then that directory +becomes the new root. + +If a bookmark that links to a file is selected then that file is opened in the +previous window. + +------------------------------------------------------------------------------ + *NERDTree-go* +Default key: go +Map option: None +Applies to: files. + +If a file node is selected, it is opened in the previous window, but the +cursor does not move. + +The key combo for this mapping is always "g" + NERDTreeMapActivateNode (see +|NERDTree-o|). + +------------------------------------------------------------------------------ + *NERDTree-t* +Default key: t +Map option: NERDTreeMapOpenInTab +Applies to: files and directories. + +Opens the selected file in a new tab. If a directory is selected, a fresh +NERD Tree for that directory is opened in a new tab. + +If a bookmark which points to a directory is selected, open a NERD tree for +that directory in a new tab. If the bookmark points to a file, open that file +in a new tab. + +------------------------------------------------------------------------------ + *NERDTree-T* +Default key: T +Map option: NERDTreeMapOpenInTabSilent +Applies to: files and directories. + +The same as |NERDTree-t| except that the focus is kept in the current tab. + +------------------------------------------------------------------------------ + *NERDTree-i* +Default key: i +Map option: NERDTreeMapOpenSplit +Applies to: files. + +Opens the selected file in a new split window and puts the cursor in the new +window. + +------------------------------------------------------------------------------ + *NERDTree-gi* +Default key: gi +Map option: None +Applies to: files. + +The same as |NERDTree-i| except that the cursor is not moved. + +The key combo for this mapping is always "g" + NERDTreeMapOpenSplit (see +|NERDTree-i|). + +------------------------------------------------------------------------------ + *NERDTree-s* +Default key: s +Map option: NERDTreeMapOpenVSplit +Applies to: files. + +Opens the selected file in a new vertically split window and puts the cursor in +the new window. + +------------------------------------------------------------------------------ + *NERDTree-gs* +Default key: gs +Map option: None +Applies to: files. + +The same as |NERDTree-s| except that the cursor is not moved. + +The key combo for this mapping is always "g" + NERDTreeMapOpenVSplit (see +|NERDTree-s|). + +------------------------------------------------------------------------------ + *NERDTree-O* +Default key: O +Map option: NERDTreeMapOpenRecursively +Applies to: directories. + +Recursively opens the selelected directory. + +All files and directories are cached, but if a directory would not be +displayed due to file filters (see |'NERDTreeIgnore'| |NERDTree-f|) or the +hidden file filter (see |'NERDTreeShowHidden'|) then its contents are not +cached. This is handy, especially if you have .svn directories. + +------------------------------------------------------------------------------ + *NERDTree-x* +Default key: x +Map option: NERDTreeMapCloseDir +Applies to: files and directories. + +Closes the parent of the selected node. + +------------------------------------------------------------------------------ + *NERDTree-X* +Default key: X +Map option: NERDTreeMapCloseChildren +Applies to: directories. + +Recursively closes all children of the selected directory. + +Tip: To quickly "reset" the tree, use |NERDTree-P| with this mapping. + +------------------------------------------------------------------------------ + *NERDTree-e* +Default key: e +Map option: NERDTreeMapOpenExpl +Applies to: files and directories. + +|:edit|s the selected directory, or the selected file's directory. This could +result in a NERD tree or a netrw being opened, depending on +|'NERDTreeHijackNetrw'|. + +------------------------------------------------------------------------------ + *NERDTree-D* +Default key: D +Map option: NERDTreeMapDeleteBookmark +Applies to: lines in the bookmarks table + +Deletes the currently selected bookmark. + +------------------------------------------------------------------------------ + *NERDTree-P* +Default key: P +Map option: NERDTreeMapJumpRoot +Applies to: no restrictions. + +Jump to the tree root. + +------------------------------------------------------------------------------ + *NERDTree-p* +Default key: p +Map option: NERDTreeMapJumpParent +Applies to: files and directories. + +Jump to the parent node of the selected node. + +------------------------------------------------------------------------------ + *NERDTree-K* +Default key: K +Map option: NERDTreeMapJumpFirstChild +Applies to: files and directories. + +Jump to the first child of the current nodes parent. + +If the cursor is already on the first node then do the following: + * loop back thru the siblings of the current nodes parent until we find an + open dir with children + * go to the first child of that node + +------------------------------------------------------------------------------ + *NERDTree-J* +Default key: J +Map option: NERDTreeMapJumpLastChild +Applies to: files and directories. + +Jump to the last child of the current nodes parent. + +If the cursor is already on the last node then do the following: + * loop forward thru the siblings of the current nodes parent until we find + an open dir with children + * go to the last child of that node + +------------------------------------------------------------------------------ + *NERDTree-C-J* +Default key: +Map option: NERDTreeMapJumpNextSibling +Applies to: files and directories. + +Jump to the next sibling of the selected node. + +------------------------------------------------------------------------------ + *NERDTree-C-K* +Default key: +Map option: NERDTreeMapJumpPrevSibling +Applies to: files and directories. + +Jump to the previous sibling of the selected node. + +------------------------------------------------------------------------------ + *NERDTree-C* +Default key: C +Map option: NERDTreeMapChdir +Applies to: directories. + +Make the selected directory node the new tree root. If a file is selected, its +parent is used. + +------------------------------------------------------------------------------ + *NERDTree-u* +Default key: u +Map option: NERDTreeMapUpdir +Applies to: no restrictions. + +Move the tree root up a dir (like doing a "cd .."). + +------------------------------------------------------------------------------ + *NERDTree-U* +Default key: U +Map option: NERDTreeMapUpdirKeepOpen +Applies to: no restrictions. + +Like |NERDTree-u| except that the old tree root is kept open. + +------------------------------------------------------------------------------ + *NERDTree-r* +Default key: r +Map option: NERDTreeMapRefresh +Applies to: files and directories. + +If a dir is selected, recursively refresh that dir, i.e. scan the filesystem +for changes and represent them in the tree. + +If a file node is selected then the above is done on it's parent. + +------------------------------------------------------------------------------ + *NERDTree-R* +Default key: R +Map option: NERDTreeMapRefreshRoot +Applies to: no restrictions. + +Recursively refresh the tree root. + +------------------------------------------------------------------------------ + *NERDTree-m* +Default key: m +Map option: NERDTreeMapMenu +Applies to: files and directories. + +Display the NERD tree menu. See |NERDTreeMenu| for details. + +------------------------------------------------------------------------------ + *NERDTree-cd* +Default key: cd +Map option: NERDTreeMapChdir +Applies to: files and directories. + +Change vims current working directory to that of the selected node. + +------------------------------------------------------------------------------ + *NERDTree-I* +Default key: I +Map option: NERDTreeMapToggleHidden +Applies to: no restrictions. + +Toggles whether hidden files (i.e. "dot files") are displayed. + +------------------------------------------------------------------------------ + *NERDTree-f* +Default key: f +Map option: NERDTreeMapToggleFilters +Applies to: no restrictions. + +Toggles whether file filters are used. See |'NERDTreeIgnore'| for details. + +------------------------------------------------------------------------------ + *NERDTree-F* +Default key: F +Map option: NERDTreeMapToggleFiles +Applies to: no restrictions. + +Toggles whether file nodes are displayed. + +------------------------------------------------------------------------------ + *NERDTree-B* +Default key: B +Map option: NERDTreeMapToggleBookmarks +Applies to: no restrictions. + +Toggles whether the bookmarks table is displayed. + +------------------------------------------------------------------------------ + *NERDTree-q* +Default key: q +Map option: NERDTreeMapQuit +Applies to: no restrictions. + +Closes the NERDtree window. + +------------------------------------------------------------------------------ + *NERDTree-A* +Default key: A +Map option: NERDTreeMapToggleZoom +Applies to: no restrictions. + +Maximize (zoom) and minimize the NERDtree window. + +------------------------------------------------------------------------------ + *NERDTree-?* +Default key: ? +Map option: NERDTreeMapHelp +Applies to: no restrictions. + +Toggles whether the quickhelp is displayed. + +------------------------------------------------------------------------------ +2.3. The NERD tree menu *NERDTreeMenu* + +The NERD tree has a menu that can be programmed via the an API (see +|NERDTreeMenuAPI|). The idea is to simulate the "right click" menus that most +file explorers have. + +The script comes with two default menu plugins: exec_menuitem.vim and +fs_menu.vim. fs_menu.vim adds some basic filesystem operations to the menu for +creating/deleting/moving/copying files and dirs. exec_menuitem.vim provides a +menu item to execute executable files. + +Related tags: |NERDTree-m| |NERDTreeApi| + +============================================================================== +3. Customisation *NERDTreeOptions* + + +------------------------------------------------------------------------------ +3.1. Customisation summary *NERDTreeOptionSummary* + +The script provides the following options that can customise the behaviour the +NERD tree. These options should be set in your vimrc. + +|'loaded_nerd_tree'| Turns off the script. + +|'NERDChristmasTree'| Tells the NERD tree to make itself colourful + and pretty. + +|'NERDTreeAutoCenter'| Controls whether the NERD tree window centers + when the cursor moves within a specified + distance to the top/bottom of the window. +|'NERDTreeAutoCenterThreshold'| Controls the sensitivity of autocentering. + +|'NERDTreeCaseSensitiveSort'| Tells the NERD tree whether to be case + sensitive or not when sorting nodes. + +|'NERDTreeChDirMode'| Tells the NERD tree if/when it should change + vim's current working directory. + +|'NERDTreeHighlightCursorline'| Tell the NERD tree whether to highlight the + current cursor line. + +|'NERDTreeHijackNetrw'| Tell the NERD tree whether to replace the netrw + autocommands for exploring local directories. + +|'NERDTreeIgnore'| Tells the NERD tree which files to ignore. + +|'NERDTreeBookmarksFile'| Where the bookmarks are stored. + +|'NERDTreeMouseMode'| Tells the NERD tree how to handle mouse + clicks. + +|'NERDTreeQuitOnOpen'| Closes the tree window after opening a file. + +|'NERDTreeShowBookmarks'| Tells the NERD tree whether to display the + bookmarks table on startup. + +|'NERDTreeShowFiles'| Tells the NERD tree whether to display files + in the tree on startup. + +|'NERDTreeShowHidden'| Tells the NERD tree whether to display hidden + files on startup. + +|'NERDTreeShowLineNumbers'| Tells the NERD tree whether to display line + numbers in the tree window. + +|'NERDTreeSortOrder'| Tell the NERD tree how to sort the nodes in + the tree. + +|'NERDTreeStatusline'| Set a statusline for NERD tree windows. + +|'NERDTreeWinPos'| Tells the script where to put the NERD tree + window. + +|'NERDTreeWinSize'| Sets the window size when the NERD tree is + opened. + +------------------------------------------------------------------------------ +3.2. Customisation details *NERDTreeOptionDetails* + +To enable any of the below options you should put the given line in your +~/.vimrc + + *'loaded_nerd_tree'* +If this plugin is making you feel homicidal, it may be a good idea to turn it +off with this line in your vimrc: > + let loaded_nerd_tree=1 +< +------------------------------------------------------------------------------ + *'NERDChristmasTree'* +Values: 0 or 1. +Default: 1. + +If this option is set to 1 then some extra syntax highlighting elements are +added to the nerd tree to make it more colourful. + +Set it to 0 for a more vanilla looking tree. + +------------------------------------------------------------------------------ + *'NERDTreeAutoCenter'* +Values: 0 or 1. +Default: 1 + +If set to 1, the NERD tree window will center around the cursor if it moves to +within |'NERDTreeAutoCenterThreshold'| lines of the top/bottom of the window. + +This is ONLY done in response to tree navigation mappings, +i.e. |NERDTree-J| |NERDTree-K| |NERDTree-C-J| |NERDTree-C-K| |NERDTree-p| +|NERDTree-P| + +The centering is done with a |zz| operation. + +------------------------------------------------------------------------------ + *'NERDTreeAutoCenterThreshold'* +Values: Any natural number. +Default: 3 + +This option controls the "sensitivity" of the NERD tree auto centering. See +|'NERDTreeAutoCenter'| for details. + +------------------------------------------------------------------------------ + *'NERDTreeCaseSensitiveSort'* +Values: 0 or 1. +Default: 0. + +By default the NERD tree does not sort nodes case sensitively, i.e. nodes +could appear like this: > + bar.c + Baz.c + blarg.c + boner.c + Foo.c +< +But, if you set this option to 1 then the case of the nodes will be taken into +account. The above nodes would then be sorted like this: > + Baz.c + Foo.c + bar.c + blarg.c + boner.c +< +------------------------------------------------------------------------------ + *'NERDTreeChDirMode'* + +Values: 0, 1 or 2. +Default: 0. + +Use this option to tell the script when (if at all) to change the current +working directory (CWD) for vim. + +If it is set to 0 then the CWD is never changed by the NERD tree. + +If set to 1 then the CWD is changed when the NERD tree is first loaded to the +directory it is initialized in. For example, if you start the NERD tree with > + :NERDTree /home/marty/foobar +< +then the CWD will be changed to /home/marty/foobar and will not be changed +again unless you init another NERD tree with a similar command. + +If the option is set to 2 then it behaves the same as if set to 1 except that +the CWD is changed whenever the tree root is changed. For example, if the CWD +is /home/marty/foobar and you make the node for /home/marty/foobar/baz the new +root then the CWD will become /home/marty/foobar/baz. + +------------------------------------------------------------------------------ + *'NERDTreeHighlightCursorline'* +Values: 0 or 1. +Default: 1. + +If set to 1, the current cursor line in the NERD tree buffer will be +highlighted. This is done using the |'cursorline'| option. + +------------------------------------------------------------------------------ + *'NERDTreeHijackNetrw'* +Values: 0 or 1. +Default: 1. + +If set to 1, doing a > + :edit +< +will open up a "secondary" NERD tree instead of a netrw in the target window. + +Secondary NERD trees behaves slighly different from a regular trees in the +following respects: + 1. 'o' will open the selected file in the same window as the tree, + replacing it. + 2. you can have as many secondary tree as you want in the same tab. + +------------------------------------------------------------------------------ + *'NERDTreeIgnore'* +Values: a list of regular expressions. +Default: ['\~$']. + +This option is used to specify which files the NERD tree should ignore. It +must be a list of regular expressions. When the NERD tree is rendered, any +files/dirs that match any of the regex's in 'NERDTreeIgnore' wont be +displayed. + +For example if you put the following line in your vimrc: > + let NERDTreeIgnore=['\.vim$', '\~$'] +< +then all files ending in .vim or ~ will be ignored. + +Note: to tell the NERD tree not to ignore any files you must use the following +line: > + let NERDTreeIgnore=[] +< + +The file filters can be turned on and off dynamically with the |NERDTree-f| +mapping. + +------------------------------------------------------------------------------ + *'NERDTreeBookmarksFile'* +Values: a path +Default: $HOME/.NERDTreeBookmarks + +This is where bookmarks are saved. See |NERDTreeBookmarkCommands|. + +------------------------------------------------------------------------------ + *'NERDTreeMouseMode'* +Values: 1, 2 or 3. +Default: 1. + +If set to 1 then a double click on a node is required to open it. +If set to 2 then a single click will open directory nodes, while a double +click will still be required for file nodes. +If set to 3 then a single click will open any node. + +Note: a double click anywhere on a line that a tree node is on will +activate it, but all single-click activations must be done on name of the node +itself. For example, if you have the following node: > + | | |-application.rb +< +then (to single click activate it) you must click somewhere in +'application.rb'. + +------------------------------------------------------------------------------ + *'NERDTreeQuitOnOpen'* + +Values: 0 or 1. +Default: 0 + +If set to 1, the NERD tree window will close after opening a file with the +|NERDTree-o|, |NERDTree-i|, |NERDTree-t| and |NERDTree-T| mappings. + +------------------------------------------------------------------------------ + *'NERDTreeShowBookmarks'* +Values: 0 or 1. +Default: 0. + +If this option is set to 1 then the bookmarks table will be displayed. + +This option can be toggled dynamically, per tree, with the |NERDTree-B| +mapping. + +------------------------------------------------------------------------------ + *'NERDTreeShowFiles'* +Values: 0 or 1. +Default: 1. + +If this option is set to 1 then files are displayed in the NERD tree. If it is +set to 0 then only directories are displayed. + +This option can be toggled dynamically, per tree, with the |NERDTree-F| +mapping and is useful for drastically shrinking the tree when you are +navigating to a different part of the tree. + +------------------------------------------------------------------------------ + *'NERDTreeShowHidden'* +Values: 0 or 1. +Default: 0. + +This option tells vim whether to display hidden files by default. This option +can be dynamically toggled, per tree, with the |NERDTree-I| mapping. Use one +of the follow lines to set this option: > + let NERDTreeShowHidden=0 + let NERDTreeShowHidden=1 +< + +------------------------------------------------------------------------------ + *'NERDTreeShowLineNumbers'* +Values: 0 or 1. +Default: 0. + +This option tells vim whether to display line numbers for the NERD tree +window. Use one of the follow lines to set this option: > + let NERDTreeShowLineNumbers=0 + let NERDTreeShowLineNumbers=1 +< + +------------------------------------------------------------------------------ + *'NERDTreeSortOrder'* +Values: a list of regular expressions. +Default: ['\/$', '*', '\.swp$', '\.bak$', '\~$'] + +This option is set to a list of regular expressions which are used to +specify the order of nodes under their parent. + +For example, if the option is set to: > + ['\.vim$', '\.c$', '\.h$', '*', 'foobar'] +< +then all .vim files will be placed at the top, followed by all .c files then +all .h files. All files containing the string 'foobar' will be placed at the +end. The star is a special flag: it tells the script that every node that +doesnt match any of the other regexps should be placed here. + +If no star is present in 'NERDTreeSortOrder' then one is automatically +appended to the array. + +The regex '\/$' should be used to match directory nodes. + +After this sorting is done, the files in each group are sorted alphabetically. + +Other examples: > + (1) ['*', '\/$'] + (2) [] + (3) ['\/$', '\.rb$', '\.php$', '*', '\.swp$', '\.bak$', '\~$'] +< +1. Directories will appear last, everything else will appear above. +2. Everything will simply appear in alphabetical order. +3. Dirs will appear first, then ruby and php. Swap files, bak files and vim + backup files will appear last with everything else preceding them. + +------------------------------------------------------------------------------ + *'NERDTreeStatusline'* +Values: Any valid statusline setting. +Default: %{b:NERDTreeRoot.path.strForOS(0)} + +Tells the script what to use as the |'statusline'| setting for NERD tree +windows. + +Note that the statusline is set using |:let-&| not |:set| so escaping spaces +isn't necessary. + +Setting this option to -1 will will deactivate it so that your global +statusline setting is used instead. + +------------------------------------------------------------------------------ + *'NERDTreeWinPos'* +Values: "left" or "right" +Default: "left". + +This option is used to determine where NERD tree window is placed on the +screen. + +This option makes it possible to use two different explorer plugins +simultaneously. For example, you could have the taglist plugin on the left of +the window and the NERD tree on the right. + +------------------------------------------------------------------------------ + *'NERDTreeWinSize'* +Values: a positive integer. +Default: 31. + +This option is used to change the size of the NERD tree when it is loaded. + +============================================================================== +4. The NERD tree API *NERDTreeAPI* + +The NERD tree script allows you to add custom key mappings and menu items via +a set of API calls. Any scripts that use this API should be placed in +~/.vim/nerdtree_plugin/ (*nix) or ~/vimfiles/nerdtree_plugin (windows). + +The script exposes some prototype objects that can be used to manipulate the +tree and/or get information from it: > + g:NERDTreePath + g:NERDTreeDirNode + g:NERDTreeFileNode + g:NERDTreeBookmark +< +See the code/comments in NERD_tree.vim to find how to use these objects. The +following code conventions are used: + * class members start with a capital letter + * instance members start with a lower case letter + * private members start with an underscore + +See this blog post for more details: + http://got-ravings.blogspot.com/2008/09/vim-pr0n-prototype-based-objects.html + +------------------------------------------------------------------------------ +4.1. Key map API *NERDTreeKeymapAPI* + +NERDTreeAddKeyMap({options}) *NERDTreeAddKeyMap()* + Adds a new keymapping for all NERD tree buffers. + {options} must be a dictionary, and must contain the following keys: + "key" - the trigger key for the new mapping + "callback" - the function the new mapping will be bound to + "quickhelpText" - the text that will appear in the quickhelp (see + |NERDTree-?|) + + Example: > + call NERDTreeAddKeyMap({ + \ 'key': 'b', + \ 'callback': 'NERDTreeEchoCurrentNode', + \ 'quickhelpText': 'echo full path of current node' }) + + function! NERDTreeEchoCurrentNode() + let n = g:NERDTreeFileNode.GetSelected() + if n != {} + echomsg 'Current node: ' . n.path.str() + endif + endfunction +< + This code should sit in a file like ~/.vim/nerdtree_plugin/mymapping.vim. + It adds a (rather useless) mapping on 'b' which echos the full path to the + current node. + +------------------------------------------------------------------------------ +4.2. Menu API *NERDTreeMenuAPI* + +NERDTreeAddSubmenu({options}) *NERDTreeAddSubmenu()* + Creates and returns a new submenu. + + {options} must be a dictionary and must contain the following keys: + "text" - the text of the submenu that the user will see + "shortcut" - a shortcut key for the submenu (need not be unique) + + The following keys are optional: + "isActiveCallback" - a function that will be called to determine whether + this submenu item will be displayed or not. The callback function must return + 0 or 1. + "parent" - the parent submenu of the new submenu (returned from a previous + invocation of NERDTreeAddSubmenu()). If this key is left out then the new + submenu will sit under the top level menu. + + See below for an example. + +NERDTreeAddMenuItem({options}) *NERDTreeAddMenuItem()* + Adds a new menu item to the NERD tree menu (see |NERDTreeMenu|). + + {options} must be a dictionary and must contain the + following keys: + "text" - the text of the menu item which the user will see + "shortcut" - a shortcut key for the menu item (need not be unique) + "callback" - the function that will be called when the user activates the + menu item. + + The following keys are optional: + "isActiveCallback" - a function that will be called to determine whether + this menu item will be displayed or not. The callback function must return + 0 or 1. + "parent" - if the menu item belongs under a submenu then this key must be + specified. This value for this key will be the object that + was returned when the submenu was created with |NERDTreeAddSubmenu()|. + + See below for an example. + +NERDTreeAddMenuSeparator([{options}]) *NERDTreeAddMenuSeparator()* + Adds a menu separator (a row of dashes). + + {options} is an optional dictionary that may contain the following keys: + "isActiveCallback" - see description in |NERDTreeAddMenuItem()|. + +Below is an example of the menu API in action. > + call NERDTreeAddMenuSeparator() + + call NERDTreeAddMenuItem({ + \ 'text': 'a (t)op level menu item', + \ 'shortcut': 't', + \ 'callback': 'SomeFunction' }) + + let submenu = NERDTreeAddSubmenu({ + \ 'text': 'a (s)ub menu', + \ 'shortcut': 's' }) + + call NERDTreeAddMenuItem({ + \ 'text': '(n)ested item 1', + \ 'shortcut': 'n', + \ 'callback': 'SomeFunction', + \ 'parent': submenu }) + + call NERDTreeAddMenuItem({ + \ 'text': '(n)ested item 2', + \ 'shortcut': 'n', + \ 'callback': 'SomeFunction', + \ 'parent': submenu }) +< +This will create the following menu: > + -------------------- + a (t)op level menu item + a (s)ub menu +< +Where selecting "a (s)ub menu" will lead to a second menu: > + (n)ested item 1 + (n)ested item 2 +< +When any of the 3 concrete menu items are selected the function "SomeFunction" +will be called. + +------------------------------------------------------------------------------ +NERDTreeRender() *NERDTreeRender()* + Re-renders the NERD tree buffer. Useful if you change the state of the + tree and you want to it to be reflected in the UI. + +============================================================================== +5. About *NERDTreeAbout* + +The author of the NERD tree is a terrible terrible monster called Martyzilla +who gobbles up small children with milk and sugar for breakfast. + +He can be reached at martin.grenfell at gmail dot com. He would love to hear +from you, so feel free to send him suggestions and/or comments about this +plugin. Don't be shy --- the worst he can do is slaughter you and stuff you in +the fridge for later ;) + +The latest stable versions can be found at + http://www.vim.org/scripts/script.php?script_id=1658 + +The latest dev versions are on github + http://github.com/scrooloose/nerdtree + + +============================================================================== +6. Changelog *NERDTreeChangelog* + +4.1.0 + features: + - NERDTreeFind to reveal the node for the current buffer in the tree, + see |NERDTreeFind|. This effectively merges the FindInNERDTree plugin (by + Doug McInnes) into the script. + - make NERDTreeQuitOnOpen apply to the t/T keymaps too. Thanks to Stefan + Ritter and Rémi Prévost. + - truncate the root node if wider than the tree window. Thanks to Victor + Gonzalez. + + bugfixes: + - really fix window state restoring + - fix some win32 path escaping issues. Thanks to Stephan Baumeister, Ricky, + jfilip1024, and Chris Chambers + +4.0.0 + - add a new programmable menu system (see :help NERDTreeMenu). + - add new APIs to add menus/menu-items to the menu system as well as + custom key mappings to the NERD tree buffer (see :help NERDTreeAPI). + - removed the old API functions + - added a mapping to maximize/restore the size of nerd tree window, thanks + to Guillaume Duranceau for the patch. See :help NERDTree-A for details. + + - fix a bug where secondary nerd trees (netrw hijacked trees) and + NERDTreeQuitOnOpen didnt play nicely, thanks to Curtis Harvey. + - fix a bug where the script ignored directories whose name ended in a dot, + thanks to Aggelos Orfanakos for the patch. + - fix a bug when using the x mapping on the tree root, thanks to Bryan + Venteicher for the patch. + - fix a bug where the cursor position/window size of the nerd tree buffer + wasnt being stored on closing the window, thanks to Richard Hart. + - fix a bug where NERDTreeMirror would mirror the wrong tree + +3.1.1 + - fix a bug where a non-listed no-name buffer was getting created every + time the tree windows was created, thanks to Derek Wyatt and owen1 + - make behave the same as the 'o' mapping + - some helptag fixes in the doc, thanks strull + - fix a bug when using :set nohidden and opening a file where the previous + buf was modified. Thanks iElectric + - other minor fixes + +3.1.0 + New features: + - add mappings to open files in a vsplit, see :help NERDTree-s and :help + NERDTree-gs + - make the statusline for the nerd tree window default to something + hopefully more useful. See :help 'NERDTreeStatusline' + Bugfixes: + - make the hijack netrw functionality work when vim is started with "vim + " (thanks to Alf Mikula for the patch). + - fix a bug where the CWD wasnt being changed for some operations even when + NERDTreeChDirMode==2 (thanks to Lucas S. Buchala) + - add -bar to all the nerd tree :commands so they can chain with other + :commands (thanks to tpope) + - fix bugs when ignorecase was set (thanks to nach) + - fix a bug with the relative path code (thanks to nach) + - fix a bug where doing a :cd would cause :NERDTreeToggle to fail (thanks nach) + + +3.0.1 + Bugfixes: + - fix bugs with :NERDTreeToggle and :NERDTreeMirror when 'hidden + was not set + - fix a bug where :NERDTree would fail if was relative and + didnt start with a ./ or ../ Thanks to James Kanze. + - make the q mapping work with secondary (:e style) trees, + thanks to jamessan + - fix a bunch of small bugs with secondary trees + + More insane refactoring. + +3.0.0 + - hijack netrw so that doing an :edit will put a NERD tree in + the window rather than a netrw browser. See :help 'NERDTreeHijackNetrw' + - allow sharing of trees across tabs, see :help :NERDTreeMirror + - remove "top" and "bottom" as valid settings for NERDTreeWinPos + - change the '' mapping to 'i' + - change the 'H' mapping to 'I' + - lots of refactoring + +============================================================================== +7. Credits *NERDTreeCredits* + +Thanks to the following people for testing, bug reports, ideas etc. Without +you I probably would have got bored of the hacking the NERD tree and +just downloaded pr0n instead. + + Tim Carey-Smith (halorgium) + Vigil + Nick Brettell + Thomas Scott Urban + Terrance Cohen + Yegappan Lakshmanan + Jason Mills + Michael Geddes (frogonwheels) + Yu Jun + Michael Madsen + AOYAMA Shotaro + Zhang Weiwu + Niels Aan de Brugh + Olivier Yiptong + Zhang Shuhan + Cory Echols + Piotr Czachur + Yuan Jiang + Matan Nassau + Maxim Kim + Charlton Wang + Matt Wozniski (godlygeek) + knekk + Sean Chou + Ryan Penn + Simon Peter Nicholls + Michael Foobar + Tomasz Chomiuk + Denis Pokataev + Tim Pope (tpope) + James Kanze + James Vega (jamessan) + Frederic Chanal (nach) + Alf Mikula + Lucas S. Buchala + Curtis Harvey + Guillaume Duranceau + Richard Hart (hates) + Doug McInnes + Stefan Ritter + Rémi Prévost + Victor Gonzalez + Stephan Baumeister + Ricky + jfilip1024 + Chris Chambers + +============================================================================== +8. License *NERDTreeLicense* + +The NERD tree is released under the wtfpl. +See http://sam.zoy.org/wtfpl/COPYING. diff --git a/modules/vim/vim.dot.link/doc/bufexplorer.txt b/modules/vim/vim.dot.link/doc/bufexplorer.txt new file mode 100644 index 0000000..5d2fbcf --- /dev/null +++ b/modules/vim/vim.dot.link/doc/bufexplorer.txt @@ -0,0 +1,547 @@ +*bufexplorer.txt* Buffer Explorer Last Change: 23 Dec 2012 + +Buffer Explorer *buffer-explorer* *bufexplorer* + Version 7.3.2 + +Plugin for easily exploring (or browsing) Vim |:buffers|. + +|bufexplorer-installation| Installation +|bufexplorer-usage| Usage +|bufexplorer-windowlayout| Window Layout +|bufexplorer-customization| Customization +|bufexplorer-changelog| Change Log +|bufexplorer-todo| Todo +|bufexplorer-credits| Credits + +For Vim version 7.0 and above. +This plugin is only available if 'compatible' is not set. + +{Vi does not have any of this} + +============================================================================== +INSTALLATION *bufexplorer-installation* + +To install: + - Download the bufexplorer.zip. + - Extract the zip archive into your runtime directory. + The archive contains plugin/bufexplorer.vim, and doc/bufexplorer.txt. + - Start Vim or goto an existing instance of Vim. + - Execute the following command: +> + :helptag /doc +< + This will generate all the help tags for any file located in the doc + directory. + +============================================================================== +USAGE *bufexplorer-usage* + +To start exploring in the current window, use: > + \be or :BufExplorer or Your custom key mapping +To start exploring in a newly split horizontal window, use: > + \bs or :BufExplorerHorizontalSplit or Your custom key mapping +To start exploring in a newly split vertical window, use: > + \bv or :BufExplorerVerticalSplit or Your custom key mapping + +If you would like to use something other than '\', you may simply change the +leader (see |mapleader|). + +Note: If the current buffer is modified when bufexplorer started, the current + window is always split and the new bufexplorer is displayed in that new + window. + +Commands to use once exploring: + + Toggle help information. + Opens the buffer that is under the cursor into the current + window. + Opens the buffer that is under the cursor into the current + window. + Opens the buffer that is under the cursor in another tab. + B Works in association with the|ShowTabBuffer|option. If + |ShowTabBuffer|is set to 1, this toggles if BufExplorer is to + only store the most recent tab for this buffer or not. + d |:delete|the buffer under the cursor from the list. The + buffer's 'buflisted' is cleared. This allows for the buffer to + be displayed again using the 'show unlisted' command. + D |:wipeout|the buffer under the cursor from the list. When a + buffers is wiped, it will not be shown when unlisted buffer are + displayed. + f Toggles whether you are taken to the active window when + selecting a buffer or not. + o Opens the buffer that is under the cursor into the current + window. + p Toggles the showing of a split filename/pathname. + q Exit/Close bufexplorer. + r Reverses the order the buffers are listed in. + R Toggles relative path/absolute path. + s Cycle thru how the buffers are listed. Either by buffer + number, file name, file extension, most recently used (MRU), or + full path. + S Cycle thru how the buffers are listed, in reverse order. + Either by buffer number, file name, file extension, most + recently used (MRU), or full path. + T Toggles to show only buffers for this tab or not. + t Opens the buffer that is under the cursor in another tab. + u Toggles the showing of "unlisted" buffers. + +Once invoked, Buffer Explorer displays a sorted list (MRU is the default +sort method) of all the buffers that are currently opened. You are then +able to move the cursor to the line containing the buffer's name you are +wanting to act upon. Once you have selected the buffer you would like, +you can then either open it, close it(delete), resort the list, reverse +the sort, quit exploring and so on... + +=============================================================================== +WINDOW LAYOUT *bufexplorer-windowlayout* + +------------------------------------------------------------------------------- +" Press for Help +" Sorted by mru | Locate buffer | Absolute Split path +"= + 01 %a bufexplorer.txt C:\Vim\vimfiles\doc line 87 + 02 # bufexplorer.vim c:\Vim\vimfiles\plugin line 1 +------------------------------------------------------------------------------- + | | | | | + | | | | +-- Current Line #. + | | | +-- Relative/Full Path + | | +-- Buffer Name. + | +-- Buffer Attributes. See|:buffers|for more information. + +-- Buffer Number. See|:buffers|for more information. + +=============================================================================== +CUSTOMIZATION *bufexplorer-customization* + +If you do not like the default key mappings of \be, \bs, and \bv, you can +override bufexplorer's default mappings by setting up something like the +following in your vimrc file: + + noremap :BufExplorer + noremap :BufExplorerHorizontalSplit + noremap :BufExplorerVerticalSplit + + *g:bufExplorerChgWin* +If set, bufexplorer will bring up the selected buffer in the window specified +by g:bufExplorerChgWin. + + *g:bufExplorerDefaultHelp* +To control whether the default help is displayed or not, use: > + let g:bufExplorerDefaultHelp=0 " Do not show default help. + let g:bufExplorerDefaultHelp=1 " Show default help. +The default is to show the default help. + + *g:bufExplorerDetailedHelp* +To control whether detailed help is display by, use: > + let g:bufExplorerDetailedHelp=0 " Do not show detailed help. + let g:bufExplorerDetailedHelp=1 " Show detailed help. +The default is NOT to show detailed help. + + *g:bufExplorerFindActive* +To control whether you are taken to the active window when selecting a buffer, +use: > + let g:bufExplorerFindActive=0 " Do not go to active window. + let g:bufExplorerFindActive=1 " Go to active window. +The default is to be taken to the active window. + + *g:bufExplorerFuncRef* +When a buffer is selected, the functions specified either singly or as a list +will be called. + + *g:bufExplorerReverseSort* +To control whether to sort the buffer in reverse order or not, use: > + let g:bufExplorerReverseSort=0 " Do not sort in reverse order. + let g:bufExplorerReverseSort=1 " Sort in reverse order. +The default is NOT to sort in reverse order. + + *g:bufExplorerShowDirectories* +Directories usually show up in the list from using a command like ":e .". +To control whether to show directories in the buffer list or not, use: > + let g:bufExplorerShowDirectories=1 " Show directories. + let g:bufExplorerShowDirectories=0 " Don't show directories. +The default is to show directories. + + *g:bufExplorerShowRelativePath* +To control whether to show absolute paths or relative to the current +directory, use: > + let g:bufExplorerShowRelativePath=0 " Show absolute paths. + let g:bufExplorerShowRelativePath=1 " Show relative paths. +The default is to show absolute paths. + + *g:bufExplorerShowTabBuffer* +To control weither or not to show buffers on for the specific tab or not, use: > + let g:bufExplorerShowTabBuffer=0 " No. + let g:bufExplorerShowTabBuffer=1 " Yes. +The default is not to show. + + *g:bufExplorerShowUnlisted* +To control whether to show unlisted buffer or not, use: > + let g:bufExplorerShowUnlisted=0 " Do not show unlisted buffers. + let g:bufExplorerShowUnlisted=1 " Show unlisted buffers. +The default is to NOT show unlisted buffers. + + *g:bufExplorerSortBy* +To control what field the buffers are sorted by, use: > + let g:bufExplorerSortBy='extension' " Sort by file extension. + let g:bufExplorerSortBy='fullpath' " Sort by full file path name. + let g:bufExplorerSortBy='mru' " Sort by most recently used. + let g:bufExplorerSortBy='name' " Sort by the buffer's name. + let g:bufExplorerSortBy='number' " Sort by the buffer's number. +The default is to sort by mru. + + *g:bufExplorerSplitBelow* +To control where the new split window will be placed above or below the +current window, use: > + let g:bufExplorerSplitBelow=1 " Split new window below current. + let g:bufExplorerSplitBelow=0 " Split new window above current. +The default is to use what ever is set by the global &splitbelow +variable. + + *g:bufExplorerSplitOutPathName* +To control whether to split out the path and file name or not, use: > + let g:bufExplorerSplitOutPathName=1 " Split the path and file name. + let g:bufExplorerSplitOutPathName=0 " Don't split the path and file + " name. +The default is to split the path and file name. + + *g:bufExplorerSplitRight* +To control where the new vsplit window will be placed to the left or right of +current window, use: > + let g:bufExplorerSplitRight=0 " Split left. + let g:bufExplorerSplitRight=1 " Split right. +The default is to use the global &splitright. + +=============================================================================== +CHANGE LOG *bufexplorer-changelog* + +7.3.2 - Fix: + * Thanks go out to Michael Henry for pointing out that I completely + missed yet another function, ReverseSortSelect(), during the + refactoring. This function has now returned. +7.3.1 - Fix: + * Thanks go out to Brett Rasmussen for pointing out that the feature + added way back in version 7.2.3 by Yuriy Ershov to automatically + reposition the cursor to the line containing the active buffer, was + no longer in the plugin. That bit of code has been re-added and + all is well. +7.3.0 - It has been quite a while since I published a new version and this + is the first version since Vim 7.3 was released. + * Thanks to Tim Johnson for testing out this new version. + * I have put some time into reworking and cleaning up the code as + * well as various bug fixes. + * I have hopefully allowed for better mapping of the main public + methods as is explained in the|bufexplorer-customization|section + of the documentation. + * Add new 'B', 'o', and 'S' key mappings. + * Overall, I am hopeful that I not forgotten or lost a feature. +7.2.8 - Enhancements: + * Thanks to Charles Campbell for integrating bufexplorer with GDBMGR. + http://mysite.verizon.net/astronaut/vim/index.html#GDBMGR +7.2.7 - Fix: + * My 1st attempt to fix the "cache" issue where buffers information + has changed but the cache/display does not reflect those changes. + More work still needs to be done. +7.2.6 - Fix: + * Thanks to Michael Henry for pointing out that I totally forgot to + update the inline help to reflect the previous change to the 'd' + and 'D' keys. Opps! +7.2.5 - Fix: + * Philip Morant suggested switching the command (bwipe) associated + with the 'd' key with the command (bdelete) associated with the 'D' + key. This made sense since the 'd' key is more likely to be used + compared to the 'D' key. +7.2.4 - Fix: + * I did not implement the patch provided by Godefroid Chapelle + correctly. I missed one line which happened to be the most + important one :) +7.2.3 - Enhancements: + * Thanks to David Fishburn for helping me out with a much needed + code overhaul as well as some awesome performance enhancements. + He also reworked the handling of tabs. + * Thanks to Vladimir Dobriakov for making the suggestions on + enhancing the documentation to include a better explaination of + what is contained in the main bufexplorer window. + * Thanks to Yuriy Ershov for added code that when the bufexplorer + window is opened, the cursor is now positioned at the line with the + active buffer (useful in non-MRU sort modes). + * Yuriy also added the abiltiy to cycle through the sort fields in + reverse order. + Fixes: + * Thanks to Michael Henry for supplying a patch that allows + bufexplorer to be opened even when there is one buffer or less. + * Thanks to Godefroid Chapelle for supplying a patch that fixed + MRU sort order after loading a session. +7.2.2 - Fixes: + * Thanks to David L. Dight for spotting and fixing an issue when + using ctrl^. bufexplorer would incorrectly handle the previous + buffer so that when ctrl^ was pressed the incorrect file was opened. +7.2.1 - Fixes: + * Thanks to Dimitar for spotting and fixing a feature that was + inadvertently left out of the previous version. The feature was + when bufexplorer was used together with WinManager, you could use + the tab key to open a buffer in a split window. +7.2.0 - Enhancements: + * For all those missing the \bs and \bv commands, these have now + returned. Thanks to Phil O'Connell for asking for the return of + these missing features and helping test out this version. + Fixes: + * Fixed problem with the bufExplorerFindActive code not working + correctly. + * Fixed an incompatibility between bufexplorer and netrw that caused + buffers to be incorrectly removed from the MRU list. +7.1.7 - Fixes: + * TaCahiroy fixed several issues related to opening a buffer in a + tab. +7.1.6 - Fixes: + * Removed ff=unix from modeline in bufexplorer.txt. Found by Bill + McCarthy. +7.1.5 - Fixes: + * Could not open unnamed buffers. Fixed by TaCahiroy. +7.1.4 - Fixes: + * Sometimes when a file's path has 'white space' in it, extra buffers + would be created containing each piece of the path. i.e: + opening c:\document and settings\test.txt would create a buffer + named "and" and a buffer named "Documents". This was reported and + fixed by TaCa Yoss. +7.1.3 - Fixes: + * Added code to allow only one instance of the plugin to run at a + time. Thanks Dennis Hostetler. +7.1.2 - Fixes: + * Fixed a jumplist issue spotted by JiangJun. I overlooked the + 'jumplist' and with a couple calls to 'keepjumps', everything is + fine again. + * Went back to just having a plugin file, no autoload file. By having + the autoload, WinManager was no longer working and without really + digging into the cause, it was easier to go back to using just a + plugin file. +7.1.1 - Fixes: + * A problem spotted by Thomas Arendsen Hein. + When running Vim (7.1.94), error E493 was being thrown. + Enhancements: + * Added 'D' for 'delete' buffer as the 'd' command was a 'wipe' + buffer. +7.1.0 - Another 'major' update, some by Dave Larson, some by me. + * Making use of 'autoload' now to make the plugin load quicker. + * Removed '\bs' and '\bv'. These are now controlled by the user. The + user can issue a ':sp' or ':vs' to create a horizontal or vertical + split window and then issue a '\be' + * Added handling of tabs. +7.0.17 - Fixed issue with 'drop' command. + Various enhancements and improvements. +7.0.16 - Fixed issue reported by Liu Jiaping on non Windows systems, which was + ... + Open file1, open file2, modify file1, open bufexplorer, you get the + following error: + + --------8<-------- + Error detected while processing function + 14_StartBufExplorer..14_SplitOpen: + line 4: + E37: No write since last change (add ! to override) + + But the worse thing is, when I want to save the current buffer and + type ':w', I get another error message: + E382: Cannot write, 'buftype' option is set + --------8<-------- + +7.0.15 - Thanks to Mark Smithfield for suggesting bufexplorer needed to handle + the ':args' command. +7.0.14 - Thanks to Randall Hansen for removing the requirement of terminal + versions to be recompiled with 'gui' support so the 'drop' command + would work. The 'drop' command is really not needed in terminal + versions. +7.0.13 - Fixed integration with WinManager. + Thanks to Dave Eggum for another update. + - Fix: The detailed help didn't display the mapping for toggling + the split type, even though the split type is displayed. + - Fixed incorrect description in the detailed help for toggling + relative or full paths. + - Deprecated s:ExtractBufferNbr(). Vim's str2nr() does the same + thing. + - Created a s:Set() function that sets a variable only if it hasn't + already been defined. It's useful for initializing all those + default settings. + - Removed checks for repetitive command definitions. They were + unnecessary. + - Made the help highlighting a little more fancy. + - Minor reverse compatibility issue: Changed ambiguous setting + names to be more descriptive of what they do (also makes the code + easier to follow): + Changed bufExplorerSortDirection to bufExplorerReverseSort + Changed bufExplorerSplitType to bufExplorerSplitVertical + Changed bufExplorerOpenMode to bufExplorerUseCurrentWindow + - When the BufExplorer window closes, all the file-local marks are + now deleted. This may have the benefit of cleaning up some of the + jumplist. + - Changed the name of the parameter for StartBufExplorer from + "split" to "open". The parameter is a string which specifies how + the buffer will be open, not if it is split or not. + - Deprecated DoAnyMoreBuffersExist() - it is a one line function + only used in one spot. + - Created four functions (SplitOpen(), RebuildBufferList(), + UpdateHelpStatus() and ReSortListing()) all with one purpose - to + reduce repeated code. + - Changed the name of AddHeader() to CreateHelp() to be more + descriptive of what it does. It now returns an array instead of + updating the window directly. This has the benefit of making the + code more efficient since the text the function returns is used a + little differently in the two places the function is called. + - Other minor simplifications. +7.0.12 - MAJOR Update. + This version will ONLY run with Vim version 7.0 or greater. + Dave Eggum has made some 'significant' updates to this latest + version: + - Added BufExplorerGetAltBuf() global function to be used in the + user’s rulerformat. + - Added g:bufExplorerSplitRight option. + - Added g:bufExplorerShowRelativePath option with mapping. + - Added current line highlighting. + - The split type can now be changed whether bufexplorer is opened + in split mode or not. + - Various major and minor bug fixes and speed improvements. + - Sort by extension. + Other improvements/changes: + - Changed the help key from '?' to to be more 'standard'. + - Fixed splitting of vertical bufexplorer window. + Hopefully I have not forgot something :) +7.0.11 - Fixed a couple of highlighting bugs, reported by David Eggum. He also + changed passive voice to active on a couple of warning messages. +7.0.10 - Fixed bug report by Xiangjiang Ma. If the 'ssl' option is set, + the slash character used when displaying the path was incorrect. +7.0.9 - Martin Grenfell found and eliminated an annoying bug in the + bufexplorer/winmanager integration. The bug was were an + annoying message would be displayed when a window was split or + a new file was opened in a new window. Thanks Martin! +7.0.8 - Thanks to Mike Li for catching a bug in the WinManager integration. + The bug was related to the incorrect displaying of the buffer + explorer's window title. +7.0.7 - Thanks to Jeremy Cowgar for adding a new enhancement. This + enhancement allows the user to press 'S', that is capital S, which + will open the buffer under the cursor in a newly created split + window. +7.0.6 - Thanks to Larry Zhang for finding a bug in the "split" buffer code. + If you force set g:bufExplorerSplitType='v' in your vimrc, and if you + tried to do a \bs to split the bufexplorer window, it would always + split horizontal, not vertical. He also found that I had a typeo in + that the variable g:bufExplorerSplitVertSize was all lower case in + the documentation which was incorrect. +7.0.5 - Thanks to Mun Johl for pointing out a bug that if a buffer was + modified, the '+' was not showing up correctly. +7.0.4 - Fixed a problem discovered first by Xiangjiang Ma. Well since I've + been using vim 7.0 and not 6.3, I started using a function (getftype) + that is not in 6.3. So for backward compatibility, I conditionaly use + this function now. Thus, the g:bufExplorerShowDirectories feature is + only available when using vim 7.0 and above. +7.0.3 - Thanks to Erwin Waterlander for finding a problem when the last + buffer was deleted. This issue got me to rewrite the buffer display + logic (which I've wanted to do for sometime now). + Also great thanks to Dave Eggum for coming up with idea for + g:bufExplorerShowDirectories. Read the above information about this + feature. +7.0.2 - Thanks to Thomas Arendsen Hein for finding a problem when a user + has the default help turned off and then brought up the explorer. An + E493 would be displayed. +7.0.1 - Thanks to Erwin Waterlander for finding a couple problems. + The first problem allowed a modified buffer to be deleted. Opps! The + second problem occurred when several files were opened, BufExplorer + was started, the current buffer was deleted using the 'd' option, and + then BufExplorer was exited. The deleted buffer was still visible + while it is not in the buffers list. Opps again! +7.0.0 - Thanks to Shankar R. for suggesting to add the ability to set + the fixed width (g:bufExplorerSplitVertSize) of a new window + when opening bufexplorer vertically and fixed height + (g:bufExplorerSplitHorzSize) of a new window when opening + bufexplorer horizontally. By default, the windows are normally + split to use half the existing width or height. +6.3.0 - Added keepjumps so that the jumps list would not get cluttered with + bufexplorer related stuff. +6.2.3 - Thanks to Jay Logan for finding a bug in the vertical split position + of the code. When selecting that the window was to be split + vertically by doing a '\bv', from then on, all splits, i.e. '\bs', + were split vertically, even though g:bufExplorerSplitType was not set + to 'v'. +6.2.2 - Thanks to Patrik Modesto for adding a small improvement. For some + reason his bufexplorer window was always showing up folded. He added + 'setlocal nofoldenable' and it was fixed. +6.2.1 - Thanks goes out to Takashi Matsuo for added the 'fullPath' sorting + logic and option. +6.2.0 - Thanks goes out to Simon Johann-Ganter for spotting and fixing a + problem in that the last search pattern is overridden by the search + pattern for blank lines. +6.1.6 - Thanks to Artem Chuprina for finding a pesky bug that has been around + for sometime now. The key mapping was causing the buffer + explored to close prematurely when vim was run in an xterm. The + key mapping is now removed. +6.1.5 - Thanks to Khorev Sergey. Added option to show default help or not. +6.1.4 - Thanks goes out to Valery Kondakoff for suggesting the addition of + setlocal nonumber and foldcolumn=0. This allows for line numbering + and folding to be turned off temporarily while in the explorer. +6.1.3 - Added folding. Did some code cleanup. Added the ability to force the + newly split window to be temporarily vertical, which was suggested by + Thomas Glanzmann. +6.1.2 - Now pressing the key will quit, just like 'q'. + Added folds to hide winmanager configuration. + If anyone had the 'C' option in their cpoptions they would receive + a E10 error on startup of BufExplorer. cpo is now saved, updated and + restored. Thanks to Charles E Campbell, Jr. + Attempted to make sure there can only be one BufExplorer window open + at a time. +6.1.1 - Thanks to Brian D. Goodwin for adding toupper to FileNameCmp. This + way buffers sorted by name will be in the correct order regardless of + case. +6.0.16 - Thanks to Andre Pang for the original patch/idea to get bufexplorer + to work in insertmode/modeless mode (evim). Added Initialize + and Cleanup autocommands to handle commands that need to be + performed when starting or leaving bufexplorer. +6.0.15 - Srinath Avadhanulax added a patch for winmanager.vim. +6.0.14 - Fix a few more bug that I thought I already had fixed. Thanks + to Eric Bloodworth for adding 'Open Mode/Edit in Place'. Added + vertical splitting. +6.0.13 - Thanks to Charles E Campbell, Jr. for pointing out some embarrassing + typos that I had in the documentation. I guess I need to run + the spell checker more :o) +6.0.12 - Thanks to Madoka Machitani, for the tip on adding the augroup command + around the MRUList autocommands. +6.0.11 - Fixed bug report by Xiangjiang Ma. '"=' was being added to the + search history which messed up hlsearch. +6.0.10 - Added the necessary hooks so that the Srinath Avadhanula's + winmanager.vim script could more easily integrate with this script. + Tried to improve performance. +6.0.9 - Added MRU (Most Recently Used) sort ordering. +6.0.8 - Was not resetting the showcmd command correctly. + Added nifty help file. +6.0.7 - Thanks to Brett Carlane for some great enhancements. Some are added, + some are not, yet. Added highlighting of current and alternate + filenames. Added splitting of path/filename toggle. Reworked + ShowBuffers(). + Changed my email address. +6.0.6 - Copyright notice added. Needed this so that it could be distributed + with Debian Linux. Fixed problem with the SortListing() function + failing when there was only one buffer to display. +6.0.5 - Fixed problems reported by David Pascoe, in that you where unable to + hit 'd' on a buffer that belonged to a files that no longer existed + and that the 'yank' buffer was being overridden by the help text when + the bufexplorer was opened. +6.0.4 - Thanks to Charles Campbell, Jr. for making this plugin more plugin + *compliant*, adding default keymappings of be and bs + as well as fixing the 'w:sortDirLabel not being defined' bug. +6.0.3 - Added sorting capabilities. Sort taken from explorer.vim. +6.0.2 - Can't remember. (2001-07-25) +6.0.1 - Initial release. + +=============================================================================== +TODO *bufexplorer-todo* + +- Nothing as of now, buf if you have any suggestions, drop me an email. + +=============================================================================== +CREDITS *bufexplorer-credits* + +Author: Jeff Lanzarotta + +Credit must go out to Bram Moolenaar and all the Vim developers for +making the world's best editor (IMHO). I also want to thank everyone who +helped and gave me suggestions. I wouldn't want to leave anyone out so I +won't list names. + +=============================================================================== +vim:tw=78:noet:wrap:ts=8:ft=help:norl: diff --git a/modules/vim/vim.dot.link/doc/git-vim.txt b/modules/vim/vim.dot.link/doc/git-vim.txt new file mode 100644 index 0000000..5fba807 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/git-vim.txt @@ -0,0 +1,95 @@ +*git-vim.txt* Git Bindings for Vim + +============================================================================== +CONTENTS *git-vim-contents* + + 1. Introduction.............................|git-vim| + 2. Commands.................................|git-vim-commands| + 3. Keymaps..................................|git-vim-keymaps| + 4. License..................................|git-vim-license| + +============================================================================== +1. Introduction *git-vim* + +Git-vim provides: + +* Plugin files for calling git functions from inside Vim +* Syntax files for git displays + +============================================================================== +2. Commands *git-vim-commands* + +:GitAdd + git-add or current file if not specified. + +:GitCommit + git-commit. + +:GitStatus + Show git-status of current file or repository. + +:GitLog + Show git-log of current file or repository. + +:GitCheckout + git-checkout. Completes git commits. + +:GitDiff + git-diff. Completes git commits. + +:GitPull + git-pull. + +:GitPullRebase + git-pull —rebase. + +:GitPush + git-push. Defaults to +git push origin +. + +:GitCatFile + git-cat-file. + +:Git + Does any git command. + +:GitVimDiffMerge + Experimental. Call this command on unmerged file to enter vimdiff mode. + +:GitVimDiffMergeDone + Call this command after merging. + +============================================================================== +3. Keymaps *git-vim-keymaps* + +gd + :GitDiff + +gD + :GitDiff —cached + +gs + :GitStatus + +gl + :GitLog + +ga + :GitAdd + +gA + :GitAdd + +gc + :GitCommit + +In the git-status buffer: + + + :GitAdd + +============================================================================== +4. License *git-vim-license* + +The MIT License + + vim:tw=78:ts=8:ft=help diff --git a/modules/vim/vim.dot.link/doc/indexer.txt b/modules/vim/vim.dot.link/doc/indexer.txt new file mode 100644 index 0000000..330b486 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/indexer.txt @@ -0,0 +1,211 @@ +*indexer.txt* Plugin for automatically index project files using ctags + For Vim 7.x version + + + + By Dmitry Frank + dimon.frank email-at-sign gmail.com + + + *indexer* *indexer-plugin* + Contents: + + Options.....................|indexer-options| + Commands...................|indexer-commands| + +You can use this plugin to automatically index your project files +using ctags. This can be very useful when it's used together with plugins +omnicppcomplete (for c, c++ development), code_complete.vim +and other plugins that using tags. +You also will able to jump from function call to its definition +just by pressing Ctrl-] or g] + +This plugin can work as add-on for project.tar.gz plugin. +Indexer reads project file, parses it and builds tags for all files +in project. But it can also work without this plugin. + +Actually, if you using project.vim plugin and you projects file is +default (~/.vimprojects), then setting indexer up is very easily: +you can just copy indexer.vim to your plugins directory, start Vim +and open any file from your project. +The indexer plugin will detect that opened file from project +and automatically start ctags for each file in this project. +It also set &path and &tags options for Vim. + +If you are using project.vim but you have another projects file, +you should set option g:indexer_projectsSettingsFilename in your +vimrc. See |indexer-options| for details + +If you don't use project.vim then you can use ".indexer_files" to +define projects to index. +Default location of this file is "~/.indexer_files". You can change +it by modifying variable g:indexer_indexerListFilename + +Note that this file overrides "~/.vimprojects". If both files exists +only "~/.indexer_files" will be used. + +Syntax of this file is very easy. Propably the best way to explain it +is show an example. + +Example file "~/.indexer_files" > + [CoolProject] + + /home/user/myproject/src/*.c + /home/user/myproject/src/*.h + /home/user/myproject/inc/*.h + + [AnotherProject] + + /home/user/myproject2**/*.c + /home/user/myproject2**/*.h + + +I think, there's all obvious: +there's two projects: CoolProject and AnotherProject. +in CoolProject there's all *.c files in "myproject/src" and all header +files in "myproject/inc". in AnotherProject there's both *.c and *.h +files in "myproject2" and all subdirectories recursively. +( "**" means recursively ) +It's able to use environment variables in your paths. + +You can define the same AnotherProject simplier: + > + [AnotherProject] + + /home/user/myproject2**/*.[ch] + +And, finally, it can autodetect project root. So, you can move your +project to another place in filesystem, and all files will indexed anyway. +More detailed see in options, variable "g:indexer_lookForProjectDir". + +======================================================================== +OPTIONS *indexer-options* + +You can set these variables in your vimrc file before the plugin is loaded to +change its default behavior + +g:indexer_lookForProjectDir (default: 1) + + if on, then plugin will recursively-up search for ".vimprj" directory. + If it will be found, then plugin will source all "*.vim" files in it, + and also will set environment variable $INDEXER_PROJECT_ROOT to + directory in which is ".vimprj" directory. + + Your directory tree example: + + | home + | | user + | | | myproject + | | | | src + | | | | |-file1.c + | | | | |-file2.c + | | | | |-file3.c + | | | | | + | | | | inc + | | | | |-file1.h + | | | | |-file2.h + | | | | |-file3.h + | | | | | + | | | | .vimprj + | | | | |-conf.vim + + For example, you typing: > + $ gvim /home/user/myproject/src/file1.c +---- + + Then indexer will detect your /home/user/myproject/.vimprj directory + and source all files *.vim from it, + and set $INDEXER_PROJECT_ROOT="/home/user/myproject" + + so, you can define any settings that are individual for + your project, such as another .vimprojects file, or any other. + + This is great for people like me, that likes when ALL project files + is in only one directory. + + When i need to copy project to another computer i just copying the + whole folder, and all is done. I using $INDEXER_PROJECT_ROOT variable + in my .vimprojects file, so that i can put project in any place in + filesystem, and all files will be indexed, because + $INDEXER_PROJECT_ROOT will be always my real project root. + +g:indexer_dirNameForSearch (default: ".vimprj") + + directory name with project settings for search (".vimprj" by default) + +g:indexer_recurseUpCount (default: 10) + + count of recurse-up for search ".vimprj" directory + +g:indexer_indexerListFilename (default: "~/.indexer_files") + + indexer filename. If this file exists then projects file are ignored. + +g:indexer_projectsSettingsFilename (default: "~/.vimprojects") + + project filename. (the project file that plugin project.vim using) + +g:indexer_projectName (default: '') + + if you don't wand to index any project, you can define one name. + If it is empty, then indexes any found projects. + By default is empty. + +g:indexer_enableWhenProjectDirFound (default: 1) + + If this option is set, then if gvim started from project directory, this project + will be indexed. Otherwise project will be indexed only if there's file + from this project opened + +g:indexer_tagsDirname (default: "~/.vimtags") + + directory to save tags file. (this is directory because there's propably + several files in next versions) + + Note: If ".vimprj" directory is found, then this option is ignored and tags + directory becomes ".vimprj/tags" + +g:indexer_ctagsCommandLineOptions + + ctags command line options. By default is: + "--c++-kinds=+p+l --fields=+iaS --extra=+q" + +g:indexer_ctagsJustAppendTagsAtFileSave (default: 1) + + when there's project file saving, we need to update tags. + If this option is on, then ctags will be started just for + current file with "-a" key, otherwise tags for all project + files will be rebuild. + + There is different sides: + If just append tags, then old tags will not be removed until + you rebuild all tags by typing ":IndexerRebuild" or just restart + Vim. If rebuild tags every time, it would take long time + (depending on project size, of course) + + By default this option is on. + +======================================================================== +COMMANDS *indexer-commands* + +:IndexerInfo + + prints information about current state of plugin, such as projects file + using, files not found, and other. + + The first thing you should do if plugin doesn't work is type this command :) + +:IndexerFiles + + prints list of indexed files + +:IndexerRebuild + + rebuild tags for all files in project + +:IndexerFilesAvail + + prints list of all available files that has been read from projects file + + + vim:ft=help:tw=78: diff --git a/modules/vim/vim.dot.link/doc/project.txt b/modules/vim/vim.dot.link/doc/project.txt new file mode 100644 index 0000000..8f85c23 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/project.txt @@ -0,0 +1,710 @@ +*project.txt* Plugin for managing multiple projects with multiple sources + For Vim version 6.x and Vim version 7.x. + Last Change: Fri 13 Oct 2006 10:20:13 AM EDT + + + By Aric Blumer + aricvim email-at-sign charter.net + + *project* *project-plugin* + Contents: + + Commands...................|project-invoking| + Inheritance.............|project-inheritance| + Mappings...................|project-mappings| + Adding Mappings.....|project-adding-mappings| + Settings...................|project-settings| + Example File................|project-example| + Tips...........................|project-tips| + + +You can use this plugin's basic functionality to set up a list of +frequently-accessed files for easy navigation. The list of files will be +displayed in a window on the left side of the Vim window, and you can press + or double-click on filenames in the list to open the files. I find +this easier to use than having to navigate a directory hierarchy with the +|file-explorer|. + +You can also instruct the Plugin to change to a directory and to run Vim +scripts when you select a file. These scripts can, for example, modify the +environment to include compilers in $PATH. This makes it very easy to use +quickfix with multiple projects that use different environments. + +Other features include: + o Loading/Unloading all the files in a Project (\l, \L, \w, and \W) + o Grepping all the files in a Project (\g and \G) + o Running a user-specified script on a file (can be used to launch an + external program on the file) (\1 through \9) + o Running a user-specified script on all the files in a Project + (\f1-\f9 and \F1-\F9) + o High degree of user-configurability + o Also works with |netrw| using the XXXX://... notation where XXXX is + ftp, rcp, scp, or http. + +All of this is specified within a simple text file and a few global variables +in your vimrc file. + +You must set 'nocompatible' in your |vimrc| file to use this plugin. You can +stop the plugin from being loaded by setting the "loaded_project" variable: > + :let loaded_project = 1 + + +============================================================================== +COMMANDS *project-invoking* + +You can use the plugin by placing it in your plugin directory (e.g., +~/.vim/plugin). See |add-global-plugin|. When you start vim the next time, you +then enter the command > + :Project +or > + :Project {file} + +If you do not specify the filename, $HOME/.vimprojects is used. + +To have Vim come up with the Project Window enabled automatically (say, from a +GUI launcher), run Vim like this: [g]vim +Project + +Note that you can invoke :Project on only one file at a time. If you wish to +change the Project File, do a :bwipe in the Project Buffer, then re-invoke the +Plugin as described above. + +Several Projects can be kept and displayed in the same file, each in a fold +delimited by { and } (see |fold.txt|). There can be any number of nested +folds to provide you with a Project hierarchy. Any line without a { or a } in +the file is considered to be a filename. Blank lines are ignored, and any +text after a # is ignored. + +Because the plugin uses standard Vim folds, you can use any of the +|fold-commands|. You can double-click on the first line of a fold to open and +close it. You can select a file to open by putting the cursor on its name and +pressing or by double-clicking on it. The plugin will create a new +window to the right or use the |CTRL-W_p| equivalent if it exists. + + *project-syntax* +Each Project Entry has this form: + +project_entry ::= + ={projpath} [{options}] { + [ filename ] + [ project_entry ] + } + +{options} is one or more of the following (on the same line): + CD={path} + in={filename} + out={filename} + filter="{pat}" + flags={flag} + +Note that a project_entry can reside within a project_entry. This allows you +to set up a hierarchy within your Project. + +The will be displayed in the foldtext and cannot contain "=". +There can be no space character directly on either side of the =. + +The {projpath} is the path in which the files listed in the Project's fold +will be found, and it may contain environment variables. If the path is a +relative path, then the plugin constructs the whole path from the Project's +parent, grandparent, etc., all the way up the hierarchy. An outermost +project_entry must have an absolute path. See the |project-inheritance| +example below. {projpath} may contain spaces, but they must be escaped like +normal Vim escapes. Here are two examples of the same directory: +> + Example=/my/directory/with\ spaces { + } + Example="/my/directory/with spaces" { + } + +I recommend this for Windows®: > + + Example="c:\My Documents" { + } + +But Vim is smart enough to do this, too: > + + Example=c:\My\ Documents { + } + +CD= provides the directory that Vim will change to when you select a file in +that fold (using |:cd|). This allows you, for example, to enter |:make| to use +the local Makefile. A CD=. means that Vim will make {projpath} or its +inherited equivalent the current working directory. When CD is omitted, the +directory is not changed. There can be no space on either side of the =. The +value of CD can also be a relative path from a parent's CD. See the +|project-inheritance| example below. This directive is ignored for |netrw| +projects. Spaces are allowed in the path as for {projpath}. + +in= and out= provide the means to run arbitrary Vim scripts whenever you enter +or leave a file's buffer (see the |BufEnter| and |BufLeave| autocommand +events). The idea is to have a Vim script that sets up or tears down the +environment for the Project like this: + +in.vim: > + let $PROJECT_HOME='~/my_project' + " Put the compiler in $PATH + if $PATH !~ '/path/to/my/compiler' + let $PATH=$PATH.':/path/to/my/compiler' + endif + +out.vim: > + " Remove compiler from $PATH + if $PATH =~ '/path/to/my/compiler' + let $PATH=substitute($PATH, ':/path/to/my/compiler', '', 'g') + endif + +Then you can use :make with the proper environment depending on what file you +are currently editing. If the path to the script is relative, then it is +relative from {projpath}. These directives are inherited by Subprojects +unless the Subproject specifies its own. For use with |netrw| projects, the +paths specified for in= and out= must be absolute and local. + +filter= specifies a |glob()| file pattern. It is used to regenerate the list +of files in a Project fold when using the \r (r) map in the +Project Window. The filter value must be in quotes because it can contain +multiple file patterns. If filter is omitted, then the * pattern is used. +There can be no space on either side of the =. A Subproject will inherit the +filter of its parent unless it specifies its own filter. + +flags= provides the means to enable/disable features for a particular fold. +The general mnemonic scheme is for lower case to turn something off and upper +case to turn something on. {flag} can contain any of the following +characters: + + flag Description ~ + + l Turn off recursion for this fold for \L. Subfolds are also + blocked from the recursion. + + r Turn off refresh. When present, do not refresh this fold when + \r or \R is used. This does not affect subfold recursion. + + S Turn on sorting for refresh and create. + + s Turn off sorting for refresh and create. + + T Turn on top gravity. Forces folds to the top of the current + fold when refreshing. It has the same affect as the 'T' flag + in g:proj_flags, but controls the feature on a per-fold basis. + + t Turn off top gravity. Forces folds to the bottom of the + current fold when refreshing. + + w Turn off recursion for this fold for \W. Subfolds are also + blocked from the recursion. + + +Flags are not inherited by Subprojects. + +Any text outside a fold is ignored. + + +============================================================================== +INHERITANCE *project-inheritance* + +It's best to show inheritance by comparing these two Project Files: +> + Parent=~/my_project CD=. filter="Make* *.mk" flags=r { + Child1=c_code { + } + Child2=include CD=. filter="*.h" { + } + } + +Child1's path is "~/my_project/c_code" because ~/my_project is inherited. It +also inherits the CD from Parent. Since Parent has CD=., the Parent's cwd is +"~/my_project". Child1 therefore inherits a CD of "~/my_project". Finally, +Child1 inherits the filter from Parent. The flags are not inherited. + +Child2 only inherits the "~/my_project" from Parent. + +Thus, the example above is exactly equivalent to this: +> + Parent=~/my_project CD=. filter="Make* *.mk" flags=r { + Child1=~/my_project/c_code CD=~/my_project filter="Make* *.mk" { + } + Child2=~/my_project/include CD=~/my_project/include filter="*.h" { + } + } + +(For a real Project, Child1 would not want to inherit its parent's filter, but +this example shows the concept.) You can always enter \i to display what the +cursor's project inherits. + + +============================================================================== +MAPPINGS *project-mappings* + +Map Action ~ + +\r Refreshes the Project fold that the cursor is in by placing in the + fold all the files that match the filter. The Project is refreshed + using an indent of one space for every foldlevel in the hierarchy. + + You may place a "# pragma keep" (without the quotes) at the end of a + line, and the file entry on that line will not be removed when you + refresh. This is useful, for example, when you have . as an entry so + you can easily browse the directory. + + Note that this mapping is actually r, and the default of + || is \. + + This does not work for Projects using |netrw|. + +\R Executes \r recursively in the current fold and all folds below. + This does not work for Projects using |netrw|. + +\c Creates a Project fold entry. It asks for the description, the path + to the files, the CD parameter, and the filename |glob()| pattern. + From this information, it will create the Project Entry below the + cursor. + + This does not work for Projects using |netrw|. + +\C Creates a Project fold entry like \c, but recursively includes all the + subdirectories. + + + Select a file to open in the |CTRL-W_p| window or in a new window. If + the cursor is on a fold, open or close it. + + +\s + Same as but horizontally split the target window. + s is provided for those terminals that don't recognize + . + +\S + Load all files in a project by doing horizontal splits. + + +\o + Same as but ensure that the opened file is the only other + window. o is provided for those terminals that don't + recognize . + + +\v + Same as but only display the file--the cursor stays in the + Project Window. + +<2-LeftMouse> + (Double-click) If on a closed fold, open it. If on an open fold + boundary, close it. If on a filename, open the file in the |CTRL-W_p| + window or in a new window. + + + Same as . + + + Same as . + + + Increase the width of the Project Window by g:proj_window_increment or + toggle between a width of + g:proj_window_width + g:proj_window_increment + and + g:proj_window_width. + + Whether you toggle or monotonically increase the width is determined + by the 't' flag of the g:proj_flags variable (see |project-flags|). + + Note that a Right Mouse click will not automatically place the cursor + in the Project Window if it is in a different window. The window will + go back to the g:proj_window_width width when you leave the window. + + Same as + + +\ + Move the text or fold under the cursor up one row. This may not work + in a terminal because the terminal is unaware of this key combination. + is provided for those terminals that don't recognize + . + + + +\ + Move the text or fold under the cursor down one row. This may not work + in a terminal because the terminal is unaware of this key combination. + is provided for those terminals that don't + recognize . + +\i Show in the status line the completely resolved and inherited + parameters for the fold the cursor is in. This is intended for + debugging your relative path and inherited parameters for manually + entered Projects. + +\I Show in the status line the completely resolved filename. Uses the + Project_GetFname(line('.')) function. + +\1 - \9 + Run the command specified in g:proj_run{x} where {x} is the number + of the key. See the documentation of g:proj_run1 below. + +\f1-\f9 + Run the command specified in g:proj_run_fold{x} where {x} is the + number of the key. The command is run on the files at the current + Project level. See the |project-settings| below. + +\F1-\F9 + Run the command specified in g:proj_run_fold{x} where {x} is the + number of the key. The command is run on the files at the current + Project level and all Subprojects. See the |project-settings| below. + +\0 Display the commands that are defined for \1 through \9. + +\f0 Display the commands that are defined for \f1 through \f9 and \F1 + through \F0. Same as \F0. + +\l Load all the files in the current Project level into Vim. While files + are being loaded, you may press any key to stop. + +\L Load all the files in the current Project and all Subprojects into + Vim. Use this mapping with caution--I wouldn't suggest using \L to + load a Project with thousands of files. (BTW, my Project file has more + than 5,300 files in it!) While files are being loaded, you may press + any key to stop. + +\w Wipe all the files in the current Project level from Vim. (If files + are modified, they will be saved first.) While files are being wiped, + you may press any key to stop. + +\W Wipe all the files in the current Project and all Subprojects from + Vim. (If files are modified, they will be saved first.) While files + are being wiped, you may press any key to stop. + +\g Grep all the files in the current Project level. + +\G Grep all the files in the current Project level and all Subprojects. + +\e Set up the Environment for the Project File as though you had selected + it with . This allows you to do a \e and a :make without + having to open any files in the project. + +\E Explore (using |file-explorer|) the directory of the project the + cursor is in. Does not work with netrw. + + When the 'g' flag is present in g:proj_flags (see |project-flags|) + this key toggles the Project Window open and closed. You may remap + this toggle function by putting the following in your vimrc and + replacing P with whatever key combination you wish: + + nmap P ToggleProject + +Note that the Project Plugin remaps :help because the Help Window and the +Project Window get into a fight over placement. The mapping avoids the +problem. + +============================================================================== +ADDING MAPPINGS *project-adding-mappings* + +You can add your own mappings or change the mappings of the plugin by placing +them in the file $HOME/.vimproject_mappings. This file, if it exists, will be +sourced when the plugin in loaded. Here is an example that will count the +number of entries in a project when you press \K (Kount, C is taken :-): > + + function! s:Wc() + let b:loadcount=0 + function! SpawnExec(infoline, fname, lineno, data) + let b:loadcount = b:loadcount + 1 + if getchar(0) != 0 | let b:stop_everything=1 | endif + endfunction + call Project_ForEach(1, line('.'), "*SpawnExec", 0, '') + delfunction SpawnExec + echon b:loadcount." Files\r" + unlet b:loadcount + if exists("b:stop_everything") + unlet b:stop_everything + echon "Aborted.\r" + endif + endfunction + + nnoremap K :call Wc() + +Here's another example of how I integrated the use of perforce with the plugin +in my $HOME/.vimproject_mappings: +> + function! s:DoP4(cmd) + let name=Project_GetFname(line('.')) + let dir=substitute(name, '\(.*\)/.*', '\1', 'g') + exec 'cd '.dir + exec "!".a:cmd.' '.Project_GetFname(line('.')) + cd - + endfunction + + nmap \pa :call DoP4("p4add") + nmap \pe :call DoP4("p4edit") +< +(Note that I CD to the directory the file is in so I can pick of the $P4CONFIG +file. See the perforce documentation.) + +This creates the mappings \pe to check out the file for edit and \pa to add +the file to the depot. + +Here is another example where I remap the mapping to use an external +program to launch a special kind of file (in this case, it launches ee to view +a jpg file). It is a bit contrived, but it works. +> + let s:sid = substitute(maparg('', 'n'), '.*\(.\{-}\)_.*', '\1', '') + function! s:LaunchOrWhat() + let fname=Project_GetFname(line('.')) + if fname =~ '\.jpg$' + exec 'silent! !ee "'.fname.'"&' + else + call {s:sid}_DoFoldOrOpenEntry('', 'e') + endif + endfunction + nnoremap \|:call LaunchOrWhat() +< +If the file ends in .jpg, the external program is launched, otherwise the +original mapping of is run. + +============================================================================== +SETTINGS *project-settings* + +You can set these variables in your vimrc file before the plugin is loaded to +change its default behavior + +g:proj_window_width + The width of the Project Window that the plugin attempts to maintain. + Default: 24 + + The Project Plugin is not always successful in keeping the window + where I want it with the size specified here, but it does a decent + job. + +g:proj_window_increment + The increment by which to increase the width of the Project Window + when pressing or clicking the . Default: 100 + (See |project-mappings|.) + + *project-flags* +g:proj_flags + Default: "imst" + Various flags to control the behavior of the Project Plugin. This + variable can contain any of the following character flags. + + flag Description ~ + + b When present, use the |browse()| when selecting directories + for \c and \C. This is off by default for Windows, because + the windows browser does not allow you to select directories. + + c When present, the Project Window will automatically close when + you select a file. + + F Float the Project Window. That is, turn off automatic + resizing and placement. This allows placement between other + windows that wish to share similar placement at the side of + the screen. It is also particularly helpful for external + window managers. + + g When present, the mapping for will be created to toggle + the Project Window open and closed. + + i When present, display the filename and the current working + directory in the command line when a file is selected for + opening. + + l When present, the Project Plugin will use the |:lcd| command + rather than |:cd| to change directories when you select a file + to open. This flag is really obsolete and not of much use + because of L below. + + L Similar to l, but install a BufEnter/Leave |:autocommand| to + ensure that the current working directory is changed to the + one specified in the fold CD specification whenever that + buffer is active. (|:lcd| only changes the CWD for a window, + not a buffer.) + + m Turn on mapping of the |CTRL-W_o| and |CTRL-W_CTRL_O| normal + mode commands to make the current buffer the only visible + buffer, but keep the Project Window visible, too. + + n When present, numbers will be turned on for the project + window. + + s When present, the Project Plugin will use syntax highlighting + in the Project Window. + + S Turn on sorting for refresh and create. + + t When present, toggle the size of the window rather than just + increase the size when pressing or right-clicking. + See the entry for in |project-mappings|. + + T When present, put Subproject folds at the top of the fold when + refreshing. + + v When present, use :vimgrep rather than :grep when using \G. + +g:proj_run1 ... g:proj_run9 + Contains a Vim command to execute on the file. See the + mappings of \1 to \9 above. + + %f is replaced with the full path and filename + %F is replaced with the full path and filename with spaces + quoted + %n is replaced with the filename alone + %N is replaced with the filename alone with spaces quoted + %h is replaced with the home directory + %H is replaced with the home directory with spaces quoted + %r is replaced with the directory relative to the CD path + %R is replaced with the directory relative to the CD path + with spaces quoted + %d is replaced with the CD directory. + %D is replaced with the CD directory.with spaces quoted + %% is replaced with a single % that is not used in + expansion. + + (Deprecated: %s is also replaced with the full path and + filename for backward compatibility.) + + For example, gvim will be launched on the file under the + cursor when you enter \3 if the following is in your vimrc + file: > + let g:proj_run3='silent !gvim %f' +< Here are a few other examples: > + let g:proj_run1='!p4 edit %f' + let g:proj_run2='!p4 add %f' + let g:proj_run4="echo 'Viewing %f'|sil !xterm -e less %f &" +< + On Windows systems you will want to put the %f, %h, and %d in + single quotes to avoid \ escaping. + +g:proj_run_fold1 ... g:proj_run_fold9 + Contains a Vim command to execute on the files in a fold. See + the mappings of \f1 to \f9 and \F1 to \F9 above. + + %f is the filename, %h is replaced with the project home + directory, and %d is replaced with the CD directory. Multiple + filenames can be handled in two ways: + + The first (default) way is to have %f replaced with all the + absolute filenames, and the command is run once. The second + is to have the command run for each of the non-absolute + filenames (%f is replaced with one filename at a time). To + select the second behavior, put an '*' character at the + beginning of the g:proj_run_fold{x} variable. (The '*' is + stripped before the command is run.) + + For example, note the difference between the following: > + let g:proj_run_fold3="*echo '%h/%f'" + let g:proj_run_fold4="echo '%f'" +< + Note that on Windows systems, you will want the %f, %h, and %c + within single quotes, or the \ in the paths will cause + problems. The alternative is to put them in |escape()|. + + +============================================================================== +PROJECT EXAMPLE FILE *project-example* + +Here is an example ~/.vimprojects file: > + + 1 My Project=~/c/project CD=. in=in.vim out=out.vim flags=r { + 2 Makefile + 3 in.vim + 4 out.vim + 5 GUI Files=. filter="gui*.c gui*.h" { + 6 gui_window.c + 7 gui_dialog.c + 8 gui_list.c + 9 gui.h # Header file + 10 } + 11 Database Files=. filter="data*.c data*.h" { + 12 data_read.c + 13 data_write.c + 14 data.h + 15 } + 16 OS-Specific Files { + 17 Win32=. filter="os_win32*.c os_win32*.h" { + 18 os_win32_gui.c + 19 os_win32_io.c + 20 } + 21 Unix=. filter="os_unix*.c os_unix*.h" { + 22 os_unix_gui.c + 23 os_unix_io.c + 24 } + 25 } + 26 } + +(Don't type in the line numbers, of course.) + + +============================================================================== +TIPS ON USING PROJECT PLUGIN *project-tips* + +1. You can create a Project Entry by entering this: > + + Label=~/wherever CD=. filter="*.c *.h" { + } +< + Then you can put the cursor in the fold and press \r. The script will fill + in the files (C files in this case) from this directory for you. This is + equivalent to \c without any dialogs. + +2. You can edit the Project File at any time to add, remove, or reorder files + in the Project list. + +3. If the Project Window ever gets closed, you can just enter > + :Project +< to bring it back again. (You don't need to give it the filename; the + plugin remembers.) + + If you have the 'm' flag set in g:proj_flags, then you get the Project + Window to show up again by pressing |CTRL-W_o|. This, of course, will + close any other windows that may be open that the cursor is not in. + +4. Adding files to a Project is very easy. To add, for example, the 'more.c' + file to the Project, just insert the filename in the Project Entry then + hit on it. + +5. When |quickfix| loads files, it is not equivalent to pressing on + a filename, so the directory will not be changed and the scripts will not + be run. (If I could make this otherwise, I would.) The solution is to use + the \L key to load all of the files in the Project before running + quickfix. + +6. If the Project window gets a bit cluttered with folds partially + open/closed, you can press |zM| to close everything and tidy it up. + +7. For advanced users, I am exporting the function Project_GetAllFnames() + which returns all the filenames within a fold and optionally all its + Subprojects. Also, I export Project_ForEach() for running a function for + each filename in the project. See the code for examples on how to use + these. Finally, I export Project_GetFname(line_number) so that you can + write your own mappings and get the filename for it. + +8. Some people have asked how to do a global mapping to take the cursor to + the Project window. One of my goals for the plugin is for it to be as + self-contained as possible, so I'm not going to add it by default. But you + can put this in your vimrc: +> + nmap P :Project + +< +9. You can put the . entry in a project, and it will launch the + |file-explorer| plugin on the directory. To avoid removal when you + refresh, make the entry look like this: +> + . # pragma keep +< +============================================================================== +THANKS + + The following people have sent me patches to help with the Project + Plugin development: + + Tomas Zellerin + Lawrence Kesteloot + Dave Eggum + A Harrison + Thomas Link + Richard Bair + Eric Arnold + Peter Jones + Eric Van Dewoestine + + + vim:ts=8 sw=8 noexpandtab tw=78 ft=help: diff --git a/modules/vim/vim.dot.link/doc/snipMate.txt b/modules/vim/vim.dot.link/doc/snipMate.txt new file mode 100644 index 0000000..704d44a --- /dev/null +++ b/modules/vim/vim.dot.link/doc/snipMate.txt @@ -0,0 +1,286 @@ +*snipMate.txt* Plugin for using TextMate-style snippets in Vim. + +snipMate *snippet* *snippets* *snipMate* +Last Change: July 13, 2009 + +|snipMate-description| Description +|snipMate-syntax| Snippet syntax +|snipMate-usage| Usage +|snipMate-settings| Settings +|snipMate-features| Features +|snipMate-disadvantages| Disadvantages to TextMate +|snipMate-contact| Contact + +For Vim version 7.0 or later. +This plugin only works if 'compatible' is not set. +{Vi does not have any of these features.} + +============================================================================== +DESCRIPTION *snipMate-description* + +snipMate.vim implements some of TextMate's snippets features in Vim. A +snippet is a piece of often-typed text that you can insert into your +document using a trigger word followed by a . + +For instance, in a C file using the default installation of snipMate.vim, if +you type "for" in insert mode, it will expand a typical for loop in C: > + + for (i = 0; i < count; i++) { + + } + + +To go to the next item in the loop, simply over to it; if there is +repeated code, such as the "i" variable in this example, you can simply +start typing once it's highlighted and all the matches specified in the +snippet will be updated. To go in reverse, use . + +============================================================================== +SYNTAX *snippet-syntax* + +Snippets can be defined in two ways. They can be in their own file, named +after their trigger in 'snippets//.snippet', or they can be +defined together in a 'snippets/.snippets' file. Note that dotted +'filetype' syntax is supported -- e.g., you can use > + + :set ft=html.eruby + +to activate snippets for both HTML and eRuby for the current file. + +The syntax for snippets in *.snippets files is the following: > + + snippet trigger + expanded text + more expanded text + +Note that the first hard tab after the snippet trigger is required, and not +expanded in the actual snippet. The syntax for *.snippet files is the same, +only without the trigger declaration and starting indentation. + +Also note that snippets must be defined using hard tabs. They can be expanded +to spaces later if desired (see |snipMate-indenting|). + +"#" is used as a line-comment character in *.snippets files; however, they can +only be used outside of a snippet declaration. E.g.: > + + # this is a correct comment + snippet trigger + expanded text + snippet another_trigger + # this isn't a comment! + expanded text +< +This should hopefully be obvious with the included syntax highlighting. + + *snipMate-${#}* +Tab stops ~ + +By default, the cursor is placed at the end of a snippet. To specify where the +cursor is to be placed next, use "${#}", where the # is the number of the tab +stop. E.g., to place the cursor first on the id of a
tag, and then allow +the user to press to go to the middle of it: + > + snippet div +
+ ${2} +
+< + *snipMate-placeholders* *snipMate-${#:}* *snipMate-$#* +Placeholders ~ + +Placeholder text can be supplied using "${#:text}", where # is the number of +the tab stop. This text then can be copied throughout the snippet using "$#", +given # is the same number as used before. So, to make a C for loop: > + + snippet for + for (${2:i}; $2 < ${1:count}; $1++) { + ${4} + } + +This will cause "count" to first be selected and change if the user starts +typing. When is pressed, the "i" in ${2}'s position will be selected; +all $2 variables will default to "i" and automatically be updated if the user +starts typing. +NOTE: "$#" syntax is used only for variables, not for tab stops as in TextMate. + +Variables within variables are also possible. For instance: > + + snippet opt + + +Will, as usual, cause "option" to first be selected and update all the $1 +variables if the user starts typing. Since one of these variables is inside of +${2}, this text will then be used as a placeholder for the next tab stop, +allowing the user to change it if he wishes. + +To copy a value throughout a snippet without supplying default text, simply +use the "${#:}" construct without the text; e.g.: > + + snippet foo + ${1:}bar$1 +< *snipMate-commands* +Interpolated Vim Script ~ + +Snippets can also contain Vim script commands that are executed (via |eval()|) +when the snippet is inserted. Commands are given inside backticks (`...`); for +TextMates's functionality, use the |system()| function. E.g.: > + + snippet date + `system("date +%Y-%m-%d")` + +will insert the current date, assuming you are on a Unix system. Note that you +can also (and should) use |strftime()| for this example. + +Filename([{expr}] [, {defaultText}]) *snipMate-filename* *Filename()* + +Since the current filename is used often in snippets, a default function +has been defined for it in snipMate.vim, appropriately called Filename(). + +With no arguments, the default filename without an extension is returned; +the first argument specifies what to place before or after the filename, +and the second argument supplies the default text to be used if the file +has not been named. "$1" in the first argument is replaced with the filename; +if you only want the filename to be returned, the first argument can be left +blank. Examples: > + + snippet filename + `Filename()` + snippet filename_with_default + `Filename('', 'name')` + snippet filename_foo + `filename('$1_foo')` + +The first example returns the filename if it the file has been named, and an +empty string if it hasn't. The second returns the filename if it's been named, +and "name" if it hasn't. The third returns the filename followed by "_foo" if +it has been named, and an empty string if it hasn't. + + *multi_snip* +To specify that a snippet can have multiple matches in a *.snippets file, use +this syntax: > + + snippet trigger A description of snippet #1 + expand this text + snippet trigger A description of snippet #2 + expand THIS text! + +In this example, when "trigger" is typed, a numbered menu containing all +of the descriptions of the "trigger" will be shown; when the user presses the +corresponding number, that snippet will then be expanded. + +To create a snippet with multiple matches using *.snippet files, +simply place all the snippets in a subdirectory with the trigger name: +'snippets///.snippet'. + +============================================================================== +USAGE *snipMate-usage* + + *'snippets'* *g:snippets_dir* +Snippets are by default looked for any 'snippets' directory in your +'runtimepath'. Typically, it is located at '~/.vim/snippets/' on *nix or +'$HOME\vimfiles\snippets\' on Windows. To change that location or add another +one, change the g:snippets_dir variable in your |.vimrc| to your preferred +directory, or use the |ExtractSnips()|function. This will be used by the +|globpath()| function, and so accepts the same syntax as it (e.g., +comma-separated paths). + +ExtractSnipsFile({directory}, {filetype}) *ExtractSnipsFile()* *.snippets* + +ExtractSnipsFile() extracts the specified *.snippets file for the given +filetype. A .snippets file contains multiple snippet declarations for the +filetype. It is further explained above, in |snippet-syntax|. + +ExtractSnips({directory}, {filetype}) *ExtractSnips()* *.snippet* + +ExtractSnips() extracts *.snippet files from the specified directory and +defines them as snippets for the given filetype. The directory tree should +look like this: 'snippets//.snippet'. If the snippet has +multiple matches, it should look like this: +'snippets///.snippet' (see |multi_snip|). + + *ResetSnippets()* +The ResetSnippets() function removes all snippets from memory. This is useful +to put at the top of a snippet setup file for if you would like to |:source| +it multiple times. + + *list-snippets* *i_CTRL-R_* +If you would like to see what snippets are available, simply type +in the current buffer to show a list via |popupmenu-completion|. + +============================================================================== +SETTINGS *snipMate-settings* *g:snips_author* + +The g:snips_author string (similar to $TM_FULLNAME in TextMate) should be set +to your name; it can then be used in snippets to automatically add it. E.g.: > + + let g:snips_author = 'Hubert Farnsworth' + snippet name + `g:snips_author` +< + *snipMate-expandtab* *snipMate-indenting* +If you would like your snippets to be expanded using spaces instead of tabs, +just enable 'expandtab' and set 'softtabstop' to your preferred amount of +spaces. If 'softtabstop' is not set, 'shiftwidth' is used instead. + + *snipMate-remap* +snipMate does not come with a setting to customize the trigger key, but you +can remap it easily in the two lines it's defined in the 'after' directory +under 'plugin/snipMate.vim'. For instance, to change the trigger key +to CTRL-J, just change this: > + + ino =TriggerSnippet() + snor i=TriggerSnippet() + +to this: > + ino =TriggerSnippet() + snor i=TriggerSnippet() + +============================================================================== +FEATURES *snipMate-features* + +snipMate.vim has the following features among others: + - The syntax of snippets is very similar to TextMate's, allowing + easy conversion. + - The position of the snippet is kept transparently (i.e. it does not use + markers/placeholders written to the buffer), which allows you to escape + out of an incomplete snippet, something particularly useful in Vim. + - Variables in snippets are updated as-you-type. + - Snippets can have multiple matches. + - Snippets can be out of order. For instance, in a do...while loop, the + condition can be added before the code. + - [New] File-based snippets are supported. + - [New] Triggers after non-word delimiters are expanded, e.g. "foo" + in "bar.foo". + - [New] can now be used to jump tab stops in reverse order. + +============================================================================== +DISADVANTAGES *snipMate-disadvantages* + +snipMate.vim currently has the following disadvantages to TextMate's snippets: + - There is no $0; the order of tab stops must be explicitly stated. + - Placeholders within placeholders are not possible. E.g.: > + + '${3}
' +< + In TextMate this would first highlight ' id="some_id"', and if + you hit delete it would automatically skip ${2} and go to ${3} + on the next , but if you didn't delete it it would highlight + "some_id" first. You cannot do this in snipMate.vim. + - Regex cannot be performed on variables, such as "${1/.*/\U&}" + - Placeholders cannot span multiple lines. + - Activating snippets in different scopes of the same file is + not possible. + +Perhaps some of these features will be added in a later release. + +============================================================================== +CONTACT *snipMate-contact* *snipMate-author* + +To contact the author (Michael Sanders), please email: + msanders42+snipmate gmail com + +I greatly appreciate any suggestions or improvements offered for the script. + +============================================================================== + +vim:tw=78:ts=8:ft=help:norl: diff --git a/modules/vim/vim.dot.link/doc/taglist.txt b/modules/vim/vim.dot.link/doc/taglist.txt new file mode 100755 index 0000000..6a62b39 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/taglist.txt @@ -0,0 +1,1501 @@ +*taglist.txt* Plugin for browsing source code + +Author: Yegappan Lakshmanan (yegappan AT yahoo DOT com) +For Vim version 6.0 and above +Last change: 2007 May 24 + +1. Overview |taglist-intro| +2. Taglist on the internet |taglist-internet| +3. Requirements |taglist-requirements| +4. Installation |taglist-install| +5. Usage |taglist-using| +6. Options |taglist-options| +7. Commands |taglist-commands| +8. Global functions |taglist-functions| +9. Extending |taglist-extend| +10. FAQ |taglist-faq| +11. License |taglist-license| +12. Todo |taglist-todo| + +============================================================================== + *taglist-intro* +1. Overview~ + +The "Tag List" plugin is a source code browser plugin for Vim. This plugin +allows you to efficiently browse through source code files for different +programming languages. The "Tag List" plugin provides the following features: + + * Displays the tags (functions, classes, structures, variables, etc.) + defined in a file in a vertically or horizontally split Vim window. + * In GUI Vim, optionally displays the tags in the Tags drop-down menu and + in the popup menu. + * Automatically updates the taglist window as you switch between + files/buffers. As you open new files, the tags defined in the new files + are added to the existing file list and the tags defined in all the + files are displayed grouped by the filename. + * When a tag name is selected from the taglist window, positions the + cursor at the definition of the tag in the source file. + * Automatically highlights the current tag name. + * Groups the tags by their type and displays them in a foldable tree. + * Can display the prototype and scope of a tag. + * Can optionally display the tag prototype instead of the tag name in the + taglist window. + * The tag list can be sorted either by name or by chronological order. + * Supports the following language files: Assembly, ASP, Awk, Beta, C, + C++, C#, Cobol, Eiffel, Erlang, Fortran, HTML, Java, Javascript, Lisp, + Lua, Make, Pascal, Perl, PHP, Python, Rexx, Ruby, Scheme, Shell, Slang, + SML, Sql, TCL, Verilog, Vim and Yacc. + * Can be easily extended to support new languages. Support for + existing languages can be modified easily. + * Provides functions to display the current tag name in the Vim status + line or the window title bar. + * The list of tags and files in the taglist can be saved and + restored across Vim sessions. + * Provides commands to get the name and prototype of the current tag. + * Runs in both console/terminal and GUI versions of Vim. + * Works with the winmanager plugin. Using the winmanager plugin, you + can use Vim plugins like the file explorer, buffer explorer and the + taglist plugin at the same time like an IDE. + * Can be used in both Unix and MS-Windows systems. + +============================================================================== + *taglist-internet* +2. Taglist on the internet~ + +The home page of the taglist plugin is at: +> + http://vim-taglist.sourceforge.net/ +< +You can subscribe to the taglist mailing list to post your questions or +suggestions for improvement or to send bug reports. Visit the following page +for subscribing to the mailing list: +> + http://groups.yahoo.com/group/taglist +< +============================================================================== + *taglist-requirements* +3. Requirements~ + +The taglist plugin requires the following: + + * Vim version 6.0 and above + * Exuberant ctags 5.0 and above + +The taglist plugin will work on all the platforms where the exuberant ctags +utility and Vim are supported (this includes MS-Windows and Unix based +systems). + +The taglist plugin relies on the exuberant ctags utility to dynamically +generate the tag listing. The exuberant ctags utility must be installed in +your system to use this plugin. The exuberant ctags utility is shipped with +most of the Linux distributions. You can download the exuberant ctags utility +from +> + http://ctags.sourceforge.net +< +The taglist plugin doesn't use or create a tags file and there is no need to +create a tags file to use this plugin. The taglist plugin will not work with +the GNU ctags or the Unix ctags utility. + +This plugin relies on the Vim "filetype" detection mechanism to determine the +type of the current file. You have to turn on the Vim filetype detection by +adding the following line to your .vimrc file: +> + filetype on +< +The taglist plugin will not work if you run Vim in the restricted mode (using +the -Z command-line argument). + +The taglist plugin uses the Vim system() function to invoke the exuberant +ctags utility. If Vim is compiled without the system() function then you +cannot use the taglist plugin. Some of the Linux distributions (Suse) compile +Vim without the system() function for security reasons. + +============================================================================== + *taglist-install* +4. Installation~ + +1. Download the taglist.zip file and unzip the files to the $HOME/.vim or the + $HOME/vimfiles or the $VIM/vimfiles directory. After this step, you should + have the following two files (the directory structure should be preserved): + + plugin/taglist.vim - main taglist plugin file + doc/taglist.txt - documentation (help) file + + Refer to the |add-plugin|and |'runtimepath'| Vim help pages for more + details about installing Vim plugins. +2. Change to the $HOME/.vim/doc or $HOME/vimfiles/doc or $VIM/vimfiles/doc + directory, start Vim and run the ":helptags ." command to process the + taglist help file. Without this step, you cannot jump to the taglist help + topics. +3. If the exuberant ctags utility is not present in one of the directories in + the PATH environment variable, then set the 'Tlist_Ctags_Cmd' variable to + point to the location of the exuberant ctags utility (not to the directory) + in the .vimrc file. +4. If you are running a terminal/console version of Vim and the terminal + doesn't support changing the window width then set the + 'Tlist_Inc_Winwidth' variable to 0 in the .vimrc file. +5. Restart Vim. +6. You can now use the ":TlistToggle" command to open/close the taglist + window. You can use the ":help taglist" command to get more information + about using the taglist plugin. + +To uninstall the taglist plugin, remove the plugin/taglist.vim and +doc/taglist.txt files from the $HOME/.vim or $HOME/vimfiles directory. + +============================================================================== + *taglist-using* +5. Usage~ + +The taglist plugin can be used in several different ways. + +1. You can keep the taglist window open during the entire editing session. On + opening the taglist window, the tags defined in all the files in the Vim + buffer list will be displayed in the taglist window. As you edit files, the + tags defined in them will be added to the taglist window. You can select a + tag from the taglist window and jump to it. The current tag will be + highlighted in the taglist window. You can close the taglist window when + you no longer need the window. +2. You can configure the taglist plugin to process the tags defined in all the + edited files always. In this configuration, even if the taglist window is + closed and the taglist menu is not displayed, the taglist plugin will + processes the tags defined in newly edited files. You can then open the + taglist window only when you need to select a tag and then automatically + close the taglist window after selecting the tag. +3. You can configure the taglist plugin to display only the tags defined in + the current file in the taglist window. By default, the taglist plugin + displays the tags defined in all the files in the Vim buffer list. As you + switch between files, the taglist window will be refreshed to display only + the tags defined in the current file. +4. In GUI Vim, you can use the Tags pull-down and popup menu created by the + taglist plugin to display the tags defined in the current file and select a + tag to jump to it. You can use the menu without opening the taglist window. + By default, the Tags menu is disabled. +5. You can configure the taglist plugin to display the name of the current tag + in the Vim window status line or in the Vim window title bar. For this to + work without the taglist window or menu, you need to configure the taglist + plugin to process the tags defined in a file always. +6. You can save the tags defined in multiple files to a taglist session file + and load it when needed. You can also configure the taglist plugin to not + update the taglist window when editing new files. You can then manually add + files to the taglist window. + +Opening the taglist window~ +You can open the taglist window using the ":TlistOpen" or the ":TlistToggle" +commands. The ":TlistOpen" command opens the taglist window and jumps to it. +The ":TlistToggle" command opens or closes (toggle) the taglist window and the +cursor remains in the current window. If the 'Tlist_GainFocus_On_ToggleOpen' +variable is set to 1, then the ":TlistToggle" command opens the taglist window +and moves the cursor to the taglist window. + +You can map a key to invoke these commands. For example, the following command +creates a normal mode mapping for the key to toggle the taglist window. +> + nnoremap :TlistToggle +< +Add the above mapping to your ~/.vimrc or $HOME/_vimrc file. + +To automatically open the taglist window on Vim startup, set the +'Tlist_Auto_Open' variable to 1. + +You can also open the taglist window on startup using the following command +line: +> + $ vim +TlistOpen +< +Closing the taglist window~ +You can close the taglist window from the taglist window by pressing 'q' or +using the Vim ":q" command. You can also use any of the Vim window commands to +close the taglist window. Invoking the ":TlistToggle" command when the taglist +window is opened, closes the taglist window. You can also use the +":TlistClose" command to close the taglist window. + +To automatically close the taglist window when a tag or file is selected, you +can set the 'Tlist_Close_On_Select' variable to 1. To exit Vim when only the +taglist window is present, set the 'Tlist_Exit_OnlyWindow' variable to 1. + +Jumping to a tag or a file~ +You can select a tag in the taglist window either by pressing the key +or by double clicking the tag name using the mouse. To jump to a tag on a +single mouse click set the 'Tlist_Use_SingleClick' variable to 1. + +If the selected file is already opened in a window, then the cursor is moved +to that window. If the file is not currently opened in a window then the file +is opened in the window used by the taglist plugin to show the previously +selected file. If there are no usable windows, then the file is opened in a +new window. The file is not opened in special windows like the quickfix +window, preview window and windows containing buffer with the 'buftype' option +set. + +To jump to the tag in a new window, press the 'o' key. To open the file in the +previous window (Ctrl-W_p) use the 'P' key. You can press the 'p' key to jump +to the tag but still keep the cursor in the taglist window (preview). + +To open the selected file in a tab, use the 't' key. If the file is already +present in a tab then the cursor is moved to that tab otherwise the file is +opened in a new tab. To jump to a tag in a new tab press Ctrl-t. The taglist +window is automatically opened in the newly created tab. + +Instead of jumping to a tag, you can open a file by pressing the key +or by double clicking the file name using the mouse. + +In the taglist window, you can use the [[ or key to jump to the +beginning of the previous file. You can use the ]] or key to jump to the +beginning of the next file. When you reach the first or last file, the search +wraps around and the jumps to the next/previous file. + +Highlighting the current tag~ +The taglist plugin automatically highlights the name of the current tag in the +taglist window. The Vim |CursorHold| autocmd event is used for this. If the +current tag name is not visible in the taglist window, then the taglist window +contents are scrolled to make that tag name visible. You can also use the +":TlistHighlightTag" command to force the highlighting of the current tag. + +The tag name is highlighted if no activity is performed for |'updatetime'| +milliseconds. The default value for this Vim option is 4 seconds. To avoid +unexpected problems, you should not set the |'updatetime'| option to a very +low value. + +To disable the automatic highlighting of the current tag name in the taglist +window, set the 'Tlist_Auto_Highlight_Tag' variable to zero. + +When entering a Vim buffer/window, the taglist plugin automatically highlights +the current tag in that buffer/window. If you like to disable the automatic +highlighting of the current tag when entering a buffer, set the +'Tlist_Highlight_Tag_On_BufEnter' variable to zero. + +Adding files to the taglist~ +When the taglist window is opened, all the files in the Vim buffer list are +processed and the supported files are added to the taglist. When you edit a +file in Vim, the taglist plugin automatically processes this file and adds it +to the taglist. If you close the taglist window, the tag information in the +taglist is retained. + +To process files even when the taglist window is not open, set the +'Tlist_Process_File_Always' variable to 1. + +You can manually add multiple files to the taglist without opening them using +the ":TlistAddFiles" and the ":TlistAddFilesRecursive" commands. + +For example, to add all the C files in the /my/project/dir directory to the +taglist, you can use the following command: +> + :TlistAddFiles /my/project/dir/*.c +< +Note that when adding several files with a large number of tags or a large +number of files, it will take several seconds to several minutes for the +taglist plugin to process all the files. You should not interrupt the taglist +plugin by pressing . + +You can recursively add multiple files from a directory tree using the +":TlistAddFilesRecursive" command: +> + :TlistAddFilesRecursive /my/project/dir *.c +< +This command takes two arguments. The first argument specifies the directory +from which to recursively add the files. The second optional argument +specifies the wildcard matching pattern for selecting the files to add. The +default pattern is * and all the files are added. + +Displaying tags for only one file~ +The taglist window displays the tags for all the files in the Vim buffer list +and all the manually added files. To display the tags for only the current +active buffer, set the 'Tlist_Show_One_File' variable to 1. + +Removing files from the taglist~ +You can remove a file from the taglist window, by pressing the 'd' key when the +cursor is on one of the tags listed for the file in the taglist window. The +removed file will no longer be displayed in the taglist window in the current +Vim session. To again display the tags for the file, open the file in a Vim +window and then use the ":TlistUpdate" command or use ":TlistAddFiles" command +to add the file to the taglist. + +When a buffer is removed from the Vim buffer list using the ":bdelete" or the +":bwipeout" command, the taglist is updated to remove the stored information +for this buffer. + +Updating the tags displayed for a file~ +The taglist plugin keeps track of the modification time of a file. When the +modification time changes (the file is modified), the taglist plugin +automatically updates the tags listed for that file. The modification time of +a file is checked when you enter a window containing that file or when you +load that file. + +You can also update or refresh the tags displayed for a file by pressing the +"u" key in the taglist window. If an existing file is modified, after the file +is saved, the taglist plugin automatically updates the tags displayed for the +file. + +You can also use the ":TlistUpdate" command to update the tags for the current +buffer after you made some changes to it. You should save the modified buffer +before you update the taglist window. Otherwise the listed tags will not +include the new tags created in the buffer. + +If you have deleted the tags displayed for a file in the taglist window using +the 'd' key, you can again display the tags for that file using the +":TlistUpdate" command. + +Controlling the taglist updates~ +To disable the automatic processing of new files or modified files, you can +set the 'Tlist_Auto_Update' variable to zero. When this variable is set to +zero, the taglist is updated only when you use the ":TlistUpdate" command or +the ":TlistAddFiles" or the ":TlistAddFilesRecursive" commands. You can use +this option to control which files are added to the taglist. + +You can use the ":TlistLock" command to lock the taglist contents. After this +command is executed, new files are not automatically added to the taglist. +When the taglist is locked, you can use the ":TlistUpdate" command to add the +current file or the ":TlistAddFiles" or ":TlistAddFilesRecursive" commands to +add new files to the taglist. To unlock the taglist, use the ":TlistUnlock" +command. + +Displaying the tag prototype~ +To display the prototype of the tag under the cursor in the taglist window, +press the space bar. If you place the cursor on a tag name in the taglist +window, then the tag prototype is displayed at the Vim status line after +|'updatetime'| milliseconds. The default value for the |'updatetime'| Vim +option is 4 seconds. + +You can get the name and prototype of a tag without opening the taglist window +and the taglist menu using the ":TlistShowTag" and the ":TlistShowPrototype" +commands. These commands will work only if the current file is already present +in the taglist. To use these commands without opening the taglist window, set +the 'Tlist_Process_File_Always' variable to 1. + +You can use the ":TlistShowTag" command to display the name of the tag at or +before the specified line number in the specified file. If the file name and +line number are not supplied, then this command will display the name of the +current tag. For example, +> + :TlistShowTag + :TlistShowTag myfile.java 100 +< +You can use the ":TlistShowPrototype" command to display the prototype of the +tag at or before the specified line number in the specified file. If the file +name and the line number are not supplied, then this command will display the +prototype of the current tag. For example, +> + :TlistShowPrototype + :TlistShowPrototype myfile.c 50 +< +In the taglist window, when the mouse is moved over a tag name, the tag +prototype is displayed in a balloon. This works only in GUI versions where +balloon evaluation is supported. + +Taglist window contents~ +The taglist window contains the tags defined in various files in the taglist +grouped by the filename and by the tag type (variable, function, class, etc.). +For tags with scope information (like class members, structures inside +structures, etc.), the scope information is displayed in square brackets "[]" +after the tag name. + +The contents of the taglist buffer/window are managed by the taglist plugin. +The |'filetype'| for the taglist buffer is set to 'taglist'. The Vim +|'modifiable'| option is turned off for the taglist buffer. You should not +manually edit the taglist buffer, by setting the |'modifiable'| flag. If you +manually edit the taglist buffer contents, then the taglist plugin will be out +of sync with the taglist buffer contents and the plugin will no longer work +correctly. To redisplay the taglist buffer contents again, close the taglist +window and reopen it. + +Opening and closing the tag and file tree~ +In the taglist window, the tag names are displayed as a foldable tree using +the Vim folding support. You can collapse the tree using the '-' key or using +the Vim |zc| fold command. You can open the tree using the '+' key or using +the Vim |zo| fold command. You can open all the folds using the '*' key or +using the Vim |zR| fold command. You can also use the mouse to open/close the +folds. You can close all the folds using the '=' key. You should not manually +create or delete the folds in the taglist window. + +To automatically close the fold for the inactive files/buffers and open only +the fold for the current buffer in the taglist window, set the +'Tlist_File_Fold_Auto_Close' variable to 1. + +Sorting the tags for a file~ +The tags displayed in the taglist window can be sorted either by their name or +by their chronological order. The default sorting method is by the order in +which the tags appear in a file. You can change the default sort method by +setting the 'Tlist_Sort_Type' variable to either "name" or "order". You can +sort the tags by their name by pressing the "s" key in the taglist window. You +can again sort the tags by their chronological order using the "s" key. Each +file in the taglist window can be sorted using different order. + +Zooming in and out of the taglist window~ +You can press the 'x' key in the taglist window to maximize the taglist +window width/height. The window will be maximized to the maximum possible +width/height without closing the other existing windows. You can again press +'x' to restore the taglist window to the default width/height. + + *taglist-session* +Taglist Session~ +A taglist session refers to the group of files and their tags stored in the +taglist in a Vim session. + +You can save and restore a taglist session (and all the displayed tags) using +the ":TlistSessionSave" and ":TlistSessionLoad" commands. + +To save the information about the tags and files in the taglist to a file, use +the ":TlistSessionSave" command and specify the filename: +> + :TlistSessionSave +< +To load a saved taglist session, use the ":TlistSessionLoad" command: > + + :TlistSessionLoad +< +When you load a taglist session file, the tags stored in the file will be +added to the tags already stored in the taglist. + +The taglist session feature can be used to save the tags for large files or a +group of frequently used files (like a project). By using the taglist session +file, you can minimize the amount to time it takes to load/refresh the taglist +for multiple files. + +You can create more than one taglist session file for multiple groups of +files. + +Displaying the tag name in the Vim status line or the window title bar~ +You can use the Tlist_Get_Tagname_By_Line() function provided by the taglist +plugin to display the current tag name in the Vim status line or the window +title bar. Similarly, you can use the Tlist_Get_Tag_Prototype_By_Line() +function to display the current tag prototype in the Vim status line or the +window title bar. + +For example, the following command can be used to display the current tag name +in the status line: +> + :set statusline=%<%f%=%([%{Tlist_Get_Tagname_By_Line()}]%) +< +The following command can be used to display the current tag name in the +window title bar: +> + :set title titlestring=%<%f\ %([%{Tlist_Get_Tagname_By_Line()}]%) +< +Note that the current tag name can be displayed only after the file is +processed by the taglist plugin. For this, you have to either set the +'Tlist_Process_File_Always' variable to 1 or open the taglist window or use +the taglist menu. For more information about configuring the Vim status line, +refer to the documentation for the Vim |'statusline'| option. + +Changing the taglist window highlighting~ +The following Vim highlight groups are defined and used to highlight the +various entities in the taglist window: + + TagListTagName - Used for tag names + TagListTagScope - Used for tag scope + TagListTitle - Used for tag titles + TagListComment - Used for comments + TagListFileName - Used for filenames + +By default, these highlight groups are linked to the standard Vim highlight +groups. If you want to change the colors used for these highlight groups, +prefix the highlight group name with 'My' and define it in your .vimrc or +.gvimrc file: MyTagListTagName, MyTagListTagScope, MyTagListTitle, +MyTagListComment and MyTagListFileName. For example, to change the colors +used for tag names, you can use the following command: +> + :highlight MyTagListTagName guifg=blue ctermfg=blue +< +Controlling the taglist window~ +To use a horizontally split taglist window, instead of a vertically split +window, set the 'Tlist_Use_Horiz_Window' variable to 1. + +To use a vertically split taglist window on the rightmost side of the Vim +window, set the 'Tlist_Use_Right_Window' variable to 1. + +You can specify the width of the vertically split taglist window, by setting +the 'Tlist_WinWidth' variable. You can specify the height of the horizontally +split taglist window, by setting the 'Tlist_WinHeight' variable. + +When opening a vertically split taglist window, the Vim window width is +increased to accommodate the new taglist window. When the taglist window is +closed, the Vim window is reduced. To disable this, set the +'Tlist_Inc_Winwidth' variable to zero. + +To reduce the number of empty lines in the taglist window, set the +'Tlist_Compact_Format' variable to 1. + +To not display the Vim fold column in the taglist window, set the +'Tlist_Enable_Fold_Column' variable to zero. + +To display the tag prototypes instead of the tag names in the taglist window, +set the 'Tlist_Display_Prototype' variable to 1. + +To not display the scope of the tags next to the tag names, set the +'Tlist_Display_Tag_Scope' variable to zero. + + *taglist-keys* +Taglist window key list~ +The following table lists the description of the keys that can be used +in the taglist window. + + Key Description~ + + Jump to the location where the tag under cursor is + defined. + o Jump to the location where the tag under cursor is + defined in a new window. + P Jump to the tag in the previous (Ctrl-W_p) window. + p Display the tag definition in the file window and + keep the cursor in the taglist window itself. + t Jump to the tag in a new tab. If the file is already + opened in a tab, move to that tab. + Ctrl-t Jump to the tag in a new tab. + Display the prototype of the tag under the cursor. + For file names, display the full path to the file, + file type and the number of tags. For tag types, display the + tag type and the number of tags. + u Update the tags listed in the taglist window + s Change the sort order of the tags (by name or by order) + d Remove the tags for the file under the cursor + x Zoom-in or Zoom-out the taglist window + + Open a fold + - Close a fold + * Open all folds + = Close all folds + [[ Jump to the beginning of the previous file + Jump to the beginning of the previous file + ]] Jump to the beginning of the next file + Jump to the beginning of the next file + q Close the taglist window + Display help + +The above keys will work in both the normal mode and the insert mode. + + *taglist-menu* +Taglist menu~ +When using GUI Vim, the taglist plugin can display the tags defined in the +current file in the drop-down menu and the popup menu. By default, this +feature is turned off. To turn on this feature, set the 'Tlist_Show_Menu' +variable to 1. + +You can jump to a tag by selecting the tag name from the menu. You can use the +taglist menu independent of the taglist window i.e. you don't need to open the +taglist window to get the taglist menu. + +When you switch between files/buffers, the taglist menu is automatically +updated to display the tags defined in the current file/buffer. + +The tags are grouped by their type (variables, functions, classes, methods, +etc.) and displayed as a separate sub-menu for each type. If all the tags +defined in a file are of the same type (e.g. functions), then the sub-menu is +not used. + +If the number of items in a tag type submenu exceeds the value specified by +the 'Tlist_Max_Submenu_Items' variable, then the submenu will be split into +multiple submenus. The default setting for 'Tlist_Max_Submenu_Items' is 25. +The first and last tag names in the submenu are used to form the submenu name. +The menu items are prefixed by alpha-numeric characters for easy selection by +keyboard. + +If the popup menu support is enabled (the |'mousemodel'| option contains +"popup"), then the tags menu is added to the popup menu. You can access +the popup menu by right clicking on the GUI window. + +You can regenerate the tags menu by selecting the 'Tags->Refresh menu' entry. +You can sort the tags listed in the menu either by name or by order by +selecting the 'Tags->Sort menu by->Name/Order' menu entry. + +You can tear-off the Tags menu and keep it on the side of the Vim window +for quickly locating the tags. + +Using the taglist plugin with the winmanager plugin~ +You can use the taglist plugin with the winmanager plugin. This will allow you +to use the file explorer, buffer explorer and the taglist plugin at the same +time in different windows. To use the taglist plugin with the winmanager +plugin, set 'TagList' in the 'winManagerWindowLayout' variable. For example, +to use the file explorer plugin and the taglist plugin at the same time, use +the following setting: > + + let winManagerWindowLayout = 'FileExplorer|TagList' +< +Getting help~ +If you have installed the taglist help file (this file), then you can use the +Vim ":help taglist-" command to get help on the various taglist +topics. + +You can press the key in the taglist window to display the help +information about using the taglist window. If you again press the key, +the help information is removed from the taglist window. + + *taglist-debug* +Debugging the taglist plugin~ +You can use the ":TlistDebug" command to enable logging of the debug messages +from the taglist plugin. To display the logged debug messages, you can use the +":TlistMessages" command. To disable the logging of the debug messages, use +the ":TlistUndebug" command. + +You can specify a file name to the ":TlistDebug" command to log the debug +messages to a file. Otherwise, the debug messages are stored in a script-local +variable. In the later case, to minimize memory usage, only the last 3000 +characters from the debug messages are stored. + +============================================================================== + *taglist-options* +6. Options~ + +A number of Vim variables control the behavior of the taglist plugin. These +variables are initialized to a default value. By changing these variables you +can change the behavior of the taglist plugin. You need to change these +settings only if you want to change the behavior of the taglist plugin. You +should use the |:let| command in your .vimrc file to change the setting of any +of these variables. + +The configurable taglist variables are listed below. For a detailed +description of these variables refer to the text below this table. + +|'Tlist_Auto_Highlight_Tag'| Automatically highlight the current tag in the + taglist. +|'Tlist_Auto_Open'| Open the taglist window when Vim starts. +|'Tlist_Auto_Update'| Automatically update the taglist to include + newly edited files. +|'Tlist_Close_On_Select'| Close the taglist window when a file or tag is + selected. +|'Tlist_Compact_Format'| Remove extra information and blank lines from + the taglist window. +|'Tlist_Ctags_Cmd'| Specifies the path to the ctags utility. +|'Tlist_Display_Prototype'| Show prototypes and not tags in the taglist + window. +|'Tlist_Display_Tag_Scope'| Show tag scope next to the tag name. +|'Tlist_Enable_Fold_Column'| Show the fold indicator column in the taglist + window. +|'Tlist_Exit_OnlyWindow'| Close Vim if the taglist is the only window. +|'Tlist_File_Fold_Auto_Close'| Close tag folds for inactive buffers. +|'Tlist_GainFocus_On_ToggleOpen'| + Jump to taglist window on open. +|'Tlist_Highlight_Tag_On_BufEnter'| + On entering a buffer, automatically highlight + the current tag. +|'Tlist_Inc_Winwidth'| Increase the Vim window width to accommodate + the taglist window. +|'Tlist_Max_Submenu_Items'| Maximum number of items in a tags sub-menu. +|'Tlist_Max_Tag_Length'| Maximum tag length used in a tag menu entry. +|'Tlist_Process_File_Always'| Process files even when the taglist window is + closed. +|'Tlist_Show_Menu'| Display the tags menu. +|'Tlist_Show_One_File'| Show tags for the current buffer only. +|'Tlist_Sort_Type'| Sort method used for arranging the tags. +|'Tlist_Use_Horiz_Window'| Use a horizontally split window for the + taglist window. +|'Tlist_Use_Right_Window'| Place the taglist window on the right side. +|'Tlist_Use_SingleClick'| Single click on a tag jumps to it. +|'Tlist_WinHeight'| Horizontally split taglist window height. +|'Tlist_WinWidth'| Vertically split taglist window width. + + *'Tlist_Auto_Highlight_Tag'* +Tlist_Auto_Highlight_Tag~ +The taglist plugin will automatically highlight the current tag in the taglist +window. If you want to disable this, then you can set the +'Tlist_Auto_Highlight_Tag' variable to zero. Note that even though the current +tag highlighting is disabled, the tags for a new file will still be added to +the taglist window. +> + let Tlist_Auto_Highlight_Tag = 0 +< +With the above variable set to 1, you can use the ":TlistHighlightTag" command +to highlight the current tag. + + *'Tlist_Auto_Open'* +Tlist_Auto_Open~ +To automatically open the taglist window, when you start Vim, you can set the +'Tlist_Auto_Open' variable to 1. By default, this variable is set to zero and +the taglist window will not be opened automatically on Vim startup. +> + let Tlist_Auto_Open = 1 +< +The taglist window is opened only when a supported type of file is opened on +Vim startup. For example, if you open text files, then the taglist window will +not be opened. + + *'Tlist_Auto_Update'* +Tlist_Auto_Update~ +When a new file is edited, the tags defined in the file are automatically +processed and added to the taglist. To stop adding new files to the taglist, +set the 'Tlist_Auto_Update' variable to zero. By default, this variable is set +to 1. +> + let Tlist_Auto_Update = 0 +< +With the above variable set to 1, you can use the ":TlistUpdate" command to +add the tags defined in the current file to the taglist. + + *'Tlist_Close_On_Select'* +Tlist_Close_On_Select~ +If you want to close the taglist window when a file or tag is selected, then +set the 'Tlist_Close_On_Select' variable to 1. By default, this variable is +set zero and when you select a tag or file from the taglist window, the window +is not closed. +> + let Tlist_Close_On_Select = 1 +< + *'Tlist_Compact_Format'* +Tlist_Compact_Format~ +By default, empty lines are used to separate different tag types displayed for +a file and the tags displayed for different files in the taglist window. If +you want to display as many tags as possible in the taglist window, you can +set the 'Tlist_Compact_Format' variable to 1 to get a compact display. +> + let Tlist_Compact_Format = 1 +< + *'Tlist_Ctags_Cmd'* +Tlist_Ctags_Cmd~ +The 'Tlist_Ctags_Cmd' variable specifies the location (path) of the exuberant +ctags utility. If exuberant ctags is present in any one of the directories in +the PATH environment variable, then there is no need to set this variable. + +The exuberant ctags tool can be installed under different names. When the +taglist plugin starts up, if the 'Tlist_Ctags_Cmd' variable is not set, it +checks for the names exuberant-ctags, exctags, ctags, ctags.exe and tags in +the PATH environment variable. If any one of the named executable is found, +then the Tlist_Ctags_Cmd variable is set to that name. + +If exuberant ctags is not present in one of the directories specified in the +PATH environment variable, then set this variable to point to the location of +the ctags utility in your system. Note that this variable should point to the +fully qualified exuberant ctags location and NOT to the directory in which +exuberant ctags is installed. If the exuberant ctags tool is not found in +either PATH or in the specified location, then the taglist plugin will not be +loaded. Examples: +> + let Tlist_Ctags_Cmd = 'd:\tools\ctags.exe' + let Tlist_Ctags_Cmd = '/usr/local/bin/ctags' +< + *'Tlist_Display_Prototype'* +Tlist_Display_Prototype~ +By default, only the tag name will be displayed in the taglist window. If you +like to see tag prototypes instead of names, set the 'Tlist_Display_Prototype' +variable to 1. By default, this variable is set to zero and only tag names +will be displayed. +> + let Tlist_Display_Prototype = 1 +< + *'Tlist_Display_Tag_Scope'* +Tlist_Display_Tag_Scope~ +By default, the scope of a tag (like a C++ class) will be displayed in +square brackets next to the tag name. If you don't want the tag scopes +to be displayed, then set the 'Tlist_Display_Tag_Scope' to zero. By default, +this variable is set to 1 and the tag scopes will be displayed. +> + let Tlist_Display_Tag_Scope = 0 +< + *'Tlist_Enable_Fold_Column'* +Tlist_Enable_Fold_Column~ +By default, the Vim fold column is enabled and displayed in the taglist +window. If you wish to disable this (for example, when you are working with a +narrow Vim window or terminal), you can set the 'Tlist_Enable_Fold_Column' +variable to zero. +> + let Tlist_Enable_Fold_Column = 1 +< + *'Tlist_Exit_OnlyWindow'* +Tlist_Exit_OnlyWindow~ +If you want to exit Vim if only the taglist window is currently opened, then +set the 'Tlist_Exit_OnlyWindow' variable to 1. By default, this variable is +set to zero and the Vim instance will not be closed if only the taglist window +is present. +> + let Tlist_Exit_OnlyWindow = 1 +< + *'Tlist_File_Fold_Auto_Close'* +Tlist_File_Fold_Auto_Close~ +By default, the tags tree displayed in the taglist window for all the files is +opened. You can close/fold the tags tree for the files manually. To +automatically close the tags tree for inactive files, you can set the +'Tlist_File_Fold_Auto_Close' variable to 1. When this variable is set to 1, +the tags tree for the current buffer is automatically opened and for all the +other buffers is closed. +> + let Tlist_File_Fold_Auto_Close = 1 +< + *'Tlist_GainFocus_On_ToggleOpen'* +Tlist_GainFocus_On_ToggleOpen~ +When the taglist window is opened using the ':TlistToggle' command, this +option controls whether the cursor is moved to the taglist window or remains +in the current window. By default, this option is set to 0 and the cursor +remains in the current window. When this variable is set to 1, the cursor +moves to the taglist window after opening the taglist window. +> + let Tlist_GainFocus_On_ToggleOpen = 1 +< + *'Tlist_Highlight_Tag_On_BufEnter'* +Tlist_Highlight_Tag_On_BufEnter~ +When you enter a Vim buffer/window, the current tag in that buffer/window is +automatically highlighted in the taglist window. If the current tag name is +not visible in the taglist window, then the taglist window contents are +scrolled to make that tag name visible. If you like to disable the automatic +highlighting of the current tag when entering a buffer, you can set the +'Tlist_Highlight_Tag_On_BufEnter' variable to zero. The default setting for +this variable is 1. +> + let Tlist_Highlight_Tag_On_BufEnter = 0 +< + *'Tlist_Inc_Winwidth'* +Tlist_Inc_Winwidth~ +By default, when the width of the window is less than 100 and a new taglist +window is opened vertically, then the window width is increased by the value +set in the 'Tlist_WinWidth' variable to accommodate the new window. The value +of this variable is used only if you are using a vertically split taglist +window. + +If your terminal doesn't support changing the window width from Vim (older +version of xterm running in a Unix system) or if you see any weird problems in +the screen due to the change in the window width or if you prefer not to +adjust the window width then set the 'Tlist_Inc_Winwidth' variable to zero. +CAUTION: If you are using the MS-Windows version of Vim in a MS-DOS command +window then you must set this variable to zero, otherwise the system may hang +due to a Vim limitation (explained in :help win32-problems) +> + let Tlist_Inc_Winwidth = 0 +< + *'Tlist_Max_Submenu_Items'* +Tlist_Max_Submenu_Items~ +If a file contains too many tags of a particular type (function, variable, +class, etc.), greater than that specified by the 'Tlist_Max_Submenu_Items' +variable, then the menu for that tag type will be split into multiple +sub-menus. The default setting for the 'Tlist_Max_Submenu_Items' variable is +25. This can be changed by setting the 'Tlist_Max_Submenu_Items' variable: +> + let Tlist_Max_Submenu_Items = 20 +< +The name of the submenu is formed using the names of the first and the last +tag entries in that submenu. + + *'Tlist_Max_Tag_Length'* +Tlist_Max_Tag_Length~ +Only the first 'Tlist_Max_Tag_Length' characters from the tag names will be +used to form the tag type submenu name. The default value for this variable is +10. Change the 'Tlist_Max_Tag_Length' setting if you want to include more or +less characters: +> + let Tlist_Max_Tag_Length = 10 +< + *'Tlist_Process_File_Always'* +Tlist_Process_File_Always~ +By default, the taglist plugin will generate and process the tags defined in +the newly opened files only when the taglist window is opened or when the +taglist menu is enabled. When the taglist window is closed, the taglist plugin +will stop processing the tags for newly opened files. + +You can set the 'Tlist_Process_File_Always' variable to 1 to generate the list +of tags for new files even when the taglist window is closed and the taglist +menu is disabled. +> + let Tlist_Process_File_Always = 1 +< +To use the ":TlistShowTag" and the ":TlistShowPrototype" commands without the +taglist window and the taglist menu, you should set this variable to 1. + + *'Tlist_Show_Menu'* +Tlist_Show_Menu~ +When using GUI Vim, you can display the tags defined in the current file in a +menu named "Tags". By default, this feature is turned off. To turn on this +feature, set the 'Tlist_Show_Menu' variable to 1: +> + let Tlist_Show_Menu = 1 +< + *'Tlist_Show_One_File'* +Tlist_Show_One_File~ +By default, the taglist plugin will display the tags defined in all the loaded +buffers in the taglist window. If you prefer to display the tags defined only +in the current buffer, then you can set the 'Tlist_Show_One_File' to 1. When +this variable is set to 1, as you switch between buffers, the taglist window +will be refreshed to display the tags for the current buffer and the tags for +the previous buffer will be removed. +> + let Tlist_Show_One_File = 1 +< + *'Tlist_Sort_Type'* +Tlist_Sort_Type~ +The 'Tlist_Sort_Type' variable specifies the sort order for the tags in the +taglist window. The tags can be sorted either alphabetically by their name or +by the order of their appearance in the file (chronological order). By +default, the tag names will be listed by the order in which they are defined +in the file. You can change the sort type (from name to order or from order to +name) by pressing the "s" key in the taglist window. You can also change the +default sort order by setting 'Tlist_Sort_Type' to "name" or "order": +> + let Tlist_Sort_Type = "name" +< + *'Tlist_Use_Horiz_Window'* +Tlist_Use_Horiz_Window~ +Be default, the tag names are displayed in a vertically split window. If you +prefer a horizontally split window, then set the 'Tlist_Use_Horiz_Window' +variable to 1. If you are running MS-Windows version of Vim in a MS-DOS +command window, then you should use a horizontally split window instead of a +vertically split window. Also, if you are using an older version of xterm in a +Unix system that doesn't support changing the xterm window width, you should +use a horizontally split window. +> + let Tlist_Use_Horiz_Window = 1 +< + *'Tlist_Use_Right_Window'* +Tlist_Use_Right_Window~ +By default, the vertically split taglist window will appear on the left hand +side. If you prefer to open the window on the right hand side, you can set the +'Tlist_Use_Right_Window' variable to 1: +> + let Tlist_Use_Right_Window = 1 +< + *'Tlist_Use_SingleClick'* +Tlist_Use_SingleClick~ +By default, when you double click on the tag name using the left mouse +button, the cursor will be positioned at the definition of the tag. You +can set the 'Tlist_Use_SingleClick' variable to 1 to jump to a tag when +you single click on the tag name using the mouse. By default this variable +is set to zero. +> + let Tlist_Use_SingleClick = 1 +< +Due to a bug in Vim, if you set 'Tlist_Use_SingleClick' to 1 and try to resize +the taglist window using the mouse, then Vim will crash. This problem is fixed +in Vim 6.3 and above. In the meantime, instead of resizing the taglist window +using the mouse, you can use normal Vim window resizing commands to resize the +taglist window. + + *'Tlist_WinHeight'* +Tlist_WinHeight~ +The default height of the horizontally split taglist window is 10. This can be +changed by modifying the 'Tlist_WinHeight' variable: +> + let Tlist_WinHeight = 20 +< +The |'winfixheight'| option is set for the taglist window, to maintain the +height of the taglist window, when new Vim windows are opened and existing +windows are closed. + + *'Tlist_WinWidth'* +Tlist_WinWidth~ +The default width of the vertically split taglist window is 30. This can be +changed by modifying the 'Tlist_WinWidth' variable: +> + let Tlist_WinWidth = 20 +< +Note that the value of the |'winwidth'| option setting determines the minimum +width of the current window. If you set the 'Tlist_WinWidth' variable to a +value less than that of the |'winwidth'| option setting, then Vim will use the +value of the |'winwidth'| option. + +When new Vim windows are opened and existing windows are closed, the taglist +plugin will try to maintain the width of the taglist window to the size +specified by the 'Tlist_WinWidth' variable. + +============================================================================== + *taglist-commands* +7. Commands~ + +The taglist plugin provides the following ex-mode commands: + +|:TlistAddFiles| Add multiple files to the taglist. +|:TlistAddFilesRecursive| + Add files recursively to the taglist. +|:TlistClose| Close the taglist window. +|:TlistDebug| Start logging of taglist debug messages. +|:TlistLock| Stop adding new files to the taglist. +|:TlistMessages| Display the logged taglist plugin debug messages. +|:TlistOpen| Open and jump to the taglist window. +|:TlistSessionSave| Save the information about files and tags in the + taglist to a session file. +|:TlistSessionLoad| Load the information about files and tags stored + in a session file to taglist. +|:TlistShowPrototype| Display the prototype of the tag at or before the + specified line number. +|:TlistShowTag| Display the name of the tag defined at or before the + specified line number. +|:TlistHighlightTag| Highlight the current tag in the taglist window. +|:TlistToggle| Open or close (toggle) the taglist window. +|:TlistUndebug| Stop logging of taglist debug messages. +|:TlistUnlock| Start adding new files to the taglist. +|:TlistUpdate| Update the tags for the current buffer. + + *:TlistAddFiles* +:TlistAddFiles {file(s)} [file(s) ...] + Add one or more specified files to the taglist. You can + specify multiple filenames using wildcards. To specify a + file name with space character, you should escape the space + character with a backslash. + Examples: +> + :TlistAddFiles *.c *.cpp + :TlistAddFiles file1.html file2.html +< + If you specify a large number of files, then it will take some + time for the taglist plugin to process all of them. The + specified files will not be edited in a Vim window and will + not be added to the Vim buffer list. + + *:TlistAddFilesRecursive* +:TlistAddFilesRecursive {directory} [ {pattern} ] + Add files matching {pattern} recursively from the specified + {directory} to the taglist. If {pattern} is not specified, + then '*' is assumed. To specify the current directory, use "." + for {directory}. To specify a directory name with space + character, you should escape the space character with a + backslash. + Examples: +> + :TlistAddFilesRecursive myproject *.java + :TlistAddFilesRecursive smallproject +< + If large number of files are present in the specified + directory tree, then it will take some time for the taglist + plugin to process all of them. + + *:TlistClose* +:TlistClose Close the taglist window. This command can be used from any + one of the Vim windows. + + *:TlistDebug* +:TlistDebug [filename] + Start logging of debug messages from the taglist plugin. + If {filename} is specified, then the debug messages are stored + in the specified file. Otherwise, the debug messages are + stored in a script local variable. If the file {filename} is + already present, then it is overwritten. + + *:TlistLock* +:TlistLock + Lock the taglist and don't process new files. After this + command is executed, newly edited files will not be added to + the taglist. + + *:TlistMessages* +:TlistMessages + Display the logged debug messages from the taglist plugin + in a window. This command works only when logging to a + script-local variable. + + *:TlistOpen* +:TlistOpen Open and jump to the taglist window. Creates the taglist + window, if the window is not opened currently. After executing + this command, the cursor is moved to the taglist window. When + the taglist window is opened for the first time, all the files + in the buffer list are processed and the tags defined in them + are displayed in the taglist window. + + *:TlistSessionSave* +:TlistSessionSave {filename} + Saves the information about files and tags in the taglist to + the specified file. This command can be used to save and + restore the taglist contents across Vim sessions. + + *:TlistSessionLoad* +:TlistSessionLoad {filename} + Load the information about files and tags stored in the + specified session file to the taglist. + + *:TlistShowPrototype* +:TlistShowPrototype [filename] [linenumber] + Display the prototype of the tag at or before the specified + line number. If the file name and the line number are not + specified, then the current file name and line number are + used. A tag spans multiple lines starting from the line where + it is defined to the line before the next tag. This command + displays the prototype for the tag for any line number in this + range. + + *:TlistShowTag* +:TlistShowTag [filename] [linenumber] + Display the name of the tag defined at or before the specified + line number. If the file name and the line number are not + specified, then the current file name and line number are + used. A tag spans multiple lines starting from the line where + it is defined to the line before the next tag. This command + displays the tag name for any line number in this range. + + *:TlistHighlightTag* +:TlistHighlightTag + Highlight the current tag in the taglist window. By default, + the taglist plugin periodically updates the taglist window to + highlight the current tag. This command can be used to force + the taglist plugin to highlight the current tag. + + *:TlistToggle* +:TlistToggle Open or close (toggle) the taglist window. Opens the taglist + window, if the window is not opened currently. Closes the + taglist window, if the taglist window is already opened. When + the taglist window is opened for the first time, all the files + in the buffer list are processed and the tags are displayed in + the taglist window. After executing this command, the cursor + is not moved from the current window to the taglist window. + + *:TlistUndebug* +:TlistUndebug + Stop logging of debug messages from the taglist plugin. + + *:TlistUnlock* +:TlistUnlock + Unlock the taglist and start processing newly edited files. + + *:TlistUpdate* +:TlistUpdate Update the tags information for the current buffer. This + command can be used to re-process the current file/buffer and + get the tags information. As the taglist plugin uses the file + saved in the disk (instead of the file displayed in a Vim + buffer), you should save a modified buffer before you update + the taglist. Otherwise the listed tags will not include the + new tags created in the buffer. You can use this command even + when the taglist window is not opened. + +============================================================================== + *taglist-functions* +8. Global functions~ + +The taglist plugin provides several global functions that can be used from +other Vim plugins to interact with the taglist plugin. These functions are +described below. + +|Tlist_Update_File_Tags()| Update the tags for the specified file +|Tlist_Get_Tag_Prototype_By_Line()| Return the prototype of the tag at or + before the specified line number in the + specified file. +|Tlist_Get_Tagname_By_Line()| Return the name of the tag at or + before the specified line number in + the specified file. +|Tlist_Set_App()| Set the name of the application + controlling the taglist window. + + *Tlist_Update_File_Tags()* +Tlist_Update_File_Tags({filename}, {filetype}) + Update the tags for the file {filename}. The second argument + specifies the Vim filetype for the file. If the taglist plugin + has not processed the file previously, then the exuberant + ctags tool is invoked to generate the tags for the file. + + *Tlist_Get_Tag_Prototype_By_Line()* +Tlist_Get_Tag_Prototype_By_Line([{filename}, {linenumber}]) + Return the prototype of the tag at or before the specified + line number in the specified file. If the filename and line + number are not specified, then the current buffer name and the + current line number are used. + + *Tlist_Get_Tagname_By_Line()* +Tlist_Get_Tagname_By_Line([{filename}, {linenumber}]) + Return the name of the tag at or before the specified line + number in the specified file. If the filename and line number + are not specified, then the current buffer name and the + current line number are used. + + *Tlist_Set_App()* +Tlist_Set_App({appname}) + Set the name of the plugin that controls the taglist plugin + window and buffer. This can be used to integrate the taglist + plugin with other Vim plugins. + + For example, the winmanager plugin and the Cream package use + this function and specify the appname as "winmanager" and + "cream" respectively. + + By default, the taglist plugin is a stand-alone plugin and + controls the taglist window and buffer. If the taglist window + is controlled by an external plugin, then the appname should + be set appropriately. + +============================================================================== + *taglist-extend* +9. Extending~ + +The taglist plugin supports all the languages supported by the exuberant ctags +tool, which includes the following languages: Assembly, ASP, Awk, Beta, C, +C++, C#, Cobol, Eiffel, Erlang, Fortran, HTML, Java, Javascript, Lisp, Lua, +Make, Pascal, Perl, PHP, Python, Rexx, Ruby, Scheme, Shell, Slang, SML, Sql, +TCL, Verilog, Vim and Yacc. + +You can extend the taglist plugin to add support for new languages and also +modify the support for the above listed languages. + +You should NOT make modifications to the taglist plugin script file to add +support for new languages. You will lose these changes when you upgrade to the +next version of the taglist plugin. Instead you should follow the below +described instructions to extend the taglist plugin. + +You can extend the taglist plugin by setting variables in the .vimrc or _vimrc +file. The name of these variables depends on the language name and is +described below. + +Modifying support for an existing language~ +To modify the support for an already supported language, you have to set the +tlist_xxx_settings variable in the ~/.vimrc or $HOME/_vimrc file. Replace xxx +with the Vim filetype name for the language file. For example, to modify the +support for the perl language files, you have to set the tlist_perl_settings +variable. To modify the support for java files, you have to set the +tlist_java_settings variable. + +To determine the filetype name used by Vim for a file, use the following +command in the buffer containing the file: + + :set filetype + +The above command will display the Vim filetype for the current buffer. + +The format of the value set in the tlist_xxx_settings variable is + + ;flag1:name1;flag2:name2;flag3:name3 + +The different fields in the value are separated by the ';' character. + +The first field 'language_name' is the name used by exuberant ctags to refer +to this language file. This name can be different from the file type name used +by Vim. For example, for C++, the language name used by ctags is 'c++' but the +filetype name used by Vim is 'cpp'. To get the list of language names +supported by exuberant ctags, use the following command: + + $ ctags --list-maps=all + +The remaining fields follow the format "flag:name". The sub-field 'flag' is +the language specific flag used by exuberant ctags to generate the +corresponding tags. For example, for the C language, to list only the +functions, the 'f' flag is used. To get the list of flags supported by +exuberant ctags for the various languages use the following command: + + $ ctags --list-kinds=all + +The sub-field 'name' specifies the title text to use for displaying the tags +of a particular type. For example, 'name' can be set to 'functions'. This +field can be set to any text string name. + +For example, to list only the classes and functions defined in a C++ language +file, add the following line to your .vimrc file: + + let tlist_cpp_settings = 'c++;c:class;f:function' + +In the above setting, 'cpp' is the Vim filetype name and 'c++' is the name +used by the exuberant ctags tool. 'c' and 'f' are the flags passed to +exuberant ctags to list C++ classes and functions and 'class' is the title +used for the class tags and 'function' is the title used for the function tags +in the taglist window. + +For example, to display only functions defined in a C file and to use "My +Functions" as the title for the function tags, use + + let tlist_c_settings = 'c;f:My Functions' + +When you set the tlist_xxx_settings variable, you will override the default +setting used by the taglist plugin for the 'xxx' language. You cannot add to +the default options used by the taglist plugin for a particular file type. To +add to the options used by the taglist plugin for a language, copy the option +values from the taglist plugin file to your .vimrc file and modify it. + +Adding support for a new language~ +If you want to add support for a new language to the taglist plugin, you need +to first extend the exuberant ctags tool. For more information about extending +exuberant ctags, visit the following page: + + http://ctags.sourceforge.net/EXTENDING.html + +To add support for a new language, set the tlist_xxx_settings variable in the +~/.vimrc file appropriately as described above. Replace 'xxx' in the variable +name with the Vim filetype name for the new language. + +For example, to extend the taglist plugin to support the latex language, you +can use the following line (assuming, you have already extended exuberant +ctags to support the latex language): + + let tlist_tex_settings='latex;b:bibitem;c:command;l:label' + +With the above line, when you edit files of filetype "tex" in Vim, the taglist +plugin will invoke the exuberant ctags tool passing the "latex" filetype and +the flags b, c and l to generate the tags. The text heading 'bibitem', +'command' and 'label' will be used in the taglist window for the tags which +are generated for the flags b, c and l respectively. + +============================================================================== + *taglist-faq* +10. Frequently Asked Questions~ + +Q. The taglist plugin doesn't work. The taglist window is empty and the tags + defined in a file are not displayed. +A. Are you using Vim version 6.0 and above? The taglist plugin relies on the + features supported by Vim version 6.0 and above. You can use the following + command to get the Vim version: +> + $ vim --version +< + Are you using exuberant ctags version 5.0 and above? The taglist plugin + relies on the features supported by exuberant ctags and will not work with + GNU ctags or the Unix ctags utility. You can use the following command to + determine whether the ctags installed in your system is exuberant ctags: +> + $ ctags --version +< + Is exuberant ctags present in one of the directories in your PATH? If not, + you need to set the Tlist_Ctags_Cmd variable to point to the location of + exuberant ctags. Use the following Vim command to verify that this is setup + correctly: +> + :echo system(Tlist_Ctags_Cmd . ' --version') +< + The above command should display the version information for exuberant + ctags. + + Did you turn on the Vim filetype detection? The taglist plugin relies on + the filetype detected by Vim and passes the filetype to the exuberant ctags + utility to parse the tags. Check the output of the following Vim command: +> + :filetype +< + The output of the above command should contain "filetype detection:ON". + To turn on the filetype detection, add the following line to the .vimrc or + _vimrc file: +> + filetype on +< + Is your version of Vim compiled with the support for the system() function? + The following Vim command should display 1: +> + :echo exists('*system') +< + In some Linux distributions (particularly Suse Linux), the default Vim + installation is built without the support for the system() function. The + taglist plugin uses the system() function to invoke the exuberant ctags + utility. You need to rebuild Vim after enabling the support for the + system() function. If you use the default build options, the system() + function will be supported. + + Do you have the |'shellslash'| option set? You can try disabling the + |'shellslash'| option. When the taglist plugin invokes the exuberant ctags + utility with the path to the file, if the incorrect slashes are used, then + you will see errors. + + Check the shell related Vim options values using the following command: +> + :set shell? shellcmdflag? shellpipe? + :set shellquote? shellredir? shellxquote? +< + If these options are set in your .vimrc or _vimrc file, try removing those + lines. + + Are you using a Unix shell in a MS-Windows environment? For example, + the Unix shell from the MKS-toolkit. Do you have the SHELL environment + set to point to this shell? You can try resetting the SHELL environment + variable. + + If you are using a Unix shell on MS-Windows, you should try to use + exuberant ctags that is compiled for Unix-like environments so that + exuberant ctags will understand path names with forward slash characters. + + Is your filetype supported by the exuberant ctags utility? The file types + supported by the exuberant ctags utility are listed in the ctags help. If a + file type is not supported, you have to extend exuberant ctags. You can use + the following command to list the filetypes supported by exuberant ctags: +> + ctags --list-languages +< + Run the following command from the shell prompt and check whether the tags + defined in your file are listed in the output from exuberant ctags: +> + ctags -f - --format=2 --excmd=pattern --fields=nks +< + If you see your tags in the output from the above command, then the + exuberant ctags utility is properly parsing your file. + + Do you have the .ctags or _ctags or the ctags.cnf file in your home + directory for specifying default options or for extending exuberant ctags? + If you do have this file, check the options in this file and make sure + these options are not interfering with the operation of the taglist plugin. + + If you are using MS-Windows, check the value of the TEMP and TMP + environment variables. If these environment variables are set to a path + with space characters in the name, then try using the DOS 8.3 short name + for the path or set them to a path without the space characters in the + name. For example, if the temporary directory name is "C:\Documents and + Settings\xyz\Local Settings\Temp", then try setting the TEMP variable to + the following: +> + set TEMP=C:\DOCUMEN~1\xyz\LOCALS~1\Temp +< + If exuberant ctags is installed in a directory with space characters in the + name, then try adding the directory to the PATH environment variable or try + setting the 'Tlist_Ctags_Cmd' variable to the shortest path name to ctags + or try copying the exuberant ctags to a path without space characters in + the name. For example, if exuberant ctags is installed in the directory + "C:\Program Files\Ctags", then try setting the 'Tlist_Ctags_Cmd' variable + as below: +> + let Tlist_Ctags_Cmd='C:\Progra~1\Ctags\ctags.exe' +< + If you are using a cygwin compiled version of exuberant ctags on MS-Windows, + make sure that either you have the cygwin compiled sort utility installed + and available in your PATH or compile exuberant ctags with internal sort + support. Otherwise, when exuberant ctags sorts the tags output by invoking + the sort utility, it may end up invoking the MS-Windows version of + sort.exe, thereby resulting in failure. + +Q. When I try to open the taglist window, I am seeing the following error + message. How do I fix this problem? + + Taglist: Failed to generate tags for /my/path/to/file + ctags: illegal option -- -^@usage: ctags [-BFadtuwvx] [-f tagsfile] file ... + +A. The taglist plugin will work only with the exuberant ctags tool. You + cannot use the GNU ctags or the Unix ctags program with the taglist plugin. + You will see an error message similar to the one shown above, if you try + use a non-exuberant ctags program with Vim. To fix this problem, either add + the exuberant ctags tool location to the PATH environment variable or set + the 'Tlist_Ctags_Cmd' variable. + +Q. A file has more than one tag with the same name. When I select a tag name + from the taglist window, the cursor is positioned at the incorrect tag + location. +A. The taglist plugin uses the search pattern generated by the exuberant ctags + utility to position the cursor at the location of a tag definition. If a + file has more than one tag with the same name and same prototype, then the + search pattern will be the same. In this case, when searching for the tag + pattern, the cursor may be positioned at the incorrect location. + +Q. I have made some modifications to my file and introduced new + functions/classes/variables. I have not yet saved my file. The taglist + plugin is not displaying the new tags when I update the taglist window. +A. The exuberant ctags utility will process only files that are present in the + disk. To list the tags defined in a file, you have to save the file and + then update the taglist window. + +Q. I have created a ctags file using the exuberant ctags utility for my source + tree. How do I configure the taglist plugin to use this tags file? +A. The taglist plugin doesn't use a tags file stored in disk. For every opened + file, the taglist plugin invokes the exuberant ctags utility to get the + list of tags dynamically. The Vim system() function is used to invoke + exuberant ctags and get the ctags output. This function internally uses a + temporary file to store the output. This file is deleted after the output + from the command is read. So you will never see the file that contains the + output of exuberant ctags. + +Q. When I set the |'updatetime'| option to a low value (less than 1000) and if + I keep pressing a key with the taglist window open, the current buffer + contents are changed. Why is this? +A. The taglist plugin uses the |CursorHold| autocmd to highlight the current + tag. The CursorHold autocmd triggers for every |'updatetime'| milliseconds. + If the |'updatetime'| option is set to a low value, then the CursorHold + autocmd will be triggered frequently. As the taglist plugin changes + the focus to the taglist window to highlight the current tag, this could + interfere with the key movement resulting in changing the contents of + the current buffer. The workaround for this problem is to not set the + |'updatetime'| option to a low value. + +============================================================================== + *taglist-license* +11. License~ +Permission is hereby granted to use and distribute the taglist plugin, with or +without modifications, provided that this copyright notice is copied with it. +Like anything else that's free, taglist.vim is provided *as is* and comes with +no warranty of any kind, either expressed or implied. In no event will the +copyright holder be liable for any damamges resulting from the use of this +software. + +============================================================================== + *taglist-todo* +12. Todo~ + +1. Group tags according to the scope and display them. For example, + group all the tags belonging to a C++/Java class +2. Support for displaying tags in a modified (not-yet-saved) file. +3. Automatically open the taglist window only for selected filetypes. + For other filetypes, close the taglist window. +4. When using the shell from the MKS toolkit, the taglist plugin + doesn't work. +5. The taglist plugin doesn't work with files edited remotely using the + netrw plugin. The exuberant ctags utility cannot process files over + scp/rcp/ftp, etc. + +============================================================================== + +vim:tw=78:ts=8:noet:ft=help: diff --git a/modules/vim/vim.dot.link/doc/tags b/modules/vim/vim.dot.link/doc/tags new file mode 100644 index 0000000..0726233 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/tags @@ -0,0 +1,304 @@ +'NERDChristmasTree' NERD_tree.txt /*'NERDChristmasTree'* +'NERDTreeAutoCenter' NERD_tree.txt /*'NERDTreeAutoCenter'* +'NERDTreeAutoCenterThreshold' NERD_tree.txt /*'NERDTreeAutoCenterThreshold'* +'NERDTreeBookmarksFile' NERD_tree.txt /*'NERDTreeBookmarksFile'* +'NERDTreeCaseSensitiveSort' NERD_tree.txt /*'NERDTreeCaseSensitiveSort'* +'NERDTreeChDirMode' NERD_tree.txt /*'NERDTreeChDirMode'* +'NERDTreeHighlightCursorline' NERD_tree.txt /*'NERDTreeHighlightCursorline'* +'NERDTreeHijackNetrw' NERD_tree.txt /*'NERDTreeHijackNetrw'* +'NERDTreeIgnore' NERD_tree.txt /*'NERDTreeIgnore'* +'NERDTreeMouseMode' NERD_tree.txt /*'NERDTreeMouseMode'* +'NERDTreeQuitOnOpen' NERD_tree.txt /*'NERDTreeQuitOnOpen'* +'NERDTreeShowBookmarks' NERD_tree.txt /*'NERDTreeShowBookmarks'* +'NERDTreeShowFiles' NERD_tree.txt /*'NERDTreeShowFiles'* +'NERDTreeShowHidden' NERD_tree.txt /*'NERDTreeShowHidden'* +'NERDTreeShowLineNumbers' NERD_tree.txt /*'NERDTreeShowLineNumbers'* +'NERDTreeSortOrder' NERD_tree.txt /*'NERDTreeSortOrder'* +'NERDTreeStatusline' NERD_tree.txt /*'NERDTreeStatusline'* +'NERDTreeWinPos' NERD_tree.txt /*'NERDTreeWinPos'* +'NERDTreeWinSize' NERD_tree.txt /*'NERDTreeWinSize'* +'Tlist_Auto_Highlight_Tag' taglist.txt /*'Tlist_Auto_Highlight_Tag'* +'Tlist_Auto_Open' taglist.txt /*'Tlist_Auto_Open'* +'Tlist_Auto_Update' taglist.txt /*'Tlist_Auto_Update'* +'Tlist_Close_On_Select' taglist.txt /*'Tlist_Close_On_Select'* +'Tlist_Compact_Format' taglist.txt /*'Tlist_Compact_Format'* +'Tlist_Ctags_Cmd' taglist.txt /*'Tlist_Ctags_Cmd'* +'Tlist_Display_Prototype' taglist.txt /*'Tlist_Display_Prototype'* +'Tlist_Display_Tag_Scope' taglist.txt /*'Tlist_Display_Tag_Scope'* +'Tlist_Enable_Fold_Column' taglist.txt /*'Tlist_Enable_Fold_Column'* +'Tlist_Exit_OnlyWindow' taglist.txt /*'Tlist_Exit_OnlyWindow'* +'Tlist_File_Fold_Auto_Close' taglist.txt /*'Tlist_File_Fold_Auto_Close'* +'Tlist_GainFocus_On_ToggleOpen' taglist.txt /*'Tlist_GainFocus_On_ToggleOpen'* +'Tlist_Highlight_Tag_On_BufEnter' taglist.txt /*'Tlist_Highlight_Tag_On_BufEnter'* +'Tlist_Inc_Winwidth' taglist.txt /*'Tlist_Inc_Winwidth'* +'Tlist_Max_Submenu_Items' taglist.txt /*'Tlist_Max_Submenu_Items'* +'Tlist_Max_Tag_Length' taglist.txt /*'Tlist_Max_Tag_Length'* +'Tlist_Process_File_Always' taglist.txt /*'Tlist_Process_File_Always'* +'Tlist_Show_Menu' taglist.txt /*'Tlist_Show_Menu'* +'Tlist_Show_One_File' taglist.txt /*'Tlist_Show_One_File'* +'Tlist_Sort_Type' taglist.txt /*'Tlist_Sort_Type'* +'Tlist_Use_Horiz_Window' taglist.txt /*'Tlist_Use_Horiz_Window'* +'Tlist_Use_Right_Window' taglist.txt /*'Tlist_Use_Right_Window'* +'Tlist_Use_SingleClick' taglist.txt /*'Tlist_Use_SingleClick'* +'Tlist_WinHeight' taglist.txt /*'Tlist_WinHeight'* +'Tlist_WinWidth' taglist.txt /*'Tlist_WinWidth'* +'loaded_nerd_tree' NERD_tree.txt /*'loaded_nerd_tree'* +'snippets' snipMate.txt /*'snippets'* +.snippet snipMate.txt /*.snippet* +.snippets snipMate.txt /*.snippets* +:CVSEdit vcscommand.txt /*:CVSEdit* +:CVSEditors vcscommand.txt /*:CVSEditors* +:CVSUnedit vcscommand.txt /*:CVSUnedit* +:CVSWatch vcscommand.txt /*:CVSWatch* +:CVSWatchAdd vcscommand.txt /*:CVSWatchAdd* +:CVSWatchOff vcscommand.txt /*:CVSWatchOff* +:CVSWatchOn vcscommand.txt /*:CVSWatchOn* +:CVSWatchRemove vcscommand.txt /*:CVSWatchRemove* +:CVSWatchers vcscommand.txt /*:CVSWatchers* +:NERDTree NERD_tree.txt /*:NERDTree* +:NERDTreeClose NERD_tree.txt /*:NERDTreeClose* +:NERDTreeFind NERD_tree.txt /*:NERDTreeFind* +:NERDTreeFromBookmark NERD_tree.txt /*:NERDTreeFromBookmark* +:NERDTreeMirror NERD_tree.txt /*:NERDTreeMirror* +:NERDTreeToggle NERD_tree.txt /*:NERDTreeToggle* +:TlistAddFiles taglist.txt /*:TlistAddFiles* +:TlistAddFilesRecursive taglist.txt /*:TlistAddFilesRecursive* +:TlistClose taglist.txt /*:TlistClose* +:TlistDebug taglist.txt /*:TlistDebug* +:TlistHighlightTag taglist.txt /*:TlistHighlightTag* +:TlistLock taglist.txt /*:TlistLock* +:TlistMessages taglist.txt /*:TlistMessages* +:TlistOpen taglist.txt /*:TlistOpen* +:TlistSessionLoad taglist.txt /*:TlistSessionLoad* +:TlistSessionSave taglist.txt /*:TlistSessionSave* +:TlistShowPrototype taglist.txt /*:TlistShowPrototype* +:TlistShowTag taglist.txt /*:TlistShowTag* +:TlistToggle taglist.txt /*:TlistToggle* +:TlistUndebug taglist.txt /*:TlistUndebug* +:TlistUnlock taglist.txt /*:TlistUnlock* +:TlistUpdate taglist.txt /*:TlistUpdate* +:VCSAdd vcscommand.txt /*:VCSAdd* +:VCSAnnotate vcscommand.txt /*:VCSAnnotate* +:VCSBlame vcscommand.txt /*:VCSBlame* +:VCSCommit vcscommand.txt /*:VCSCommit* +:VCSDelete vcscommand.txt /*:VCSDelete* +:VCSDiff vcscommand.txt /*:VCSDiff* +:VCSGotoOriginal vcscommand.txt /*:VCSGotoOriginal* +:VCSInfo vcscommand.txt /*:VCSInfo* +:VCSLock vcscommand.txt /*:VCSLock* +:VCSLog vcscommand.txt /*:VCSLog* +:VCSRemove vcscommand.txt /*:VCSRemove* +:VCSRevert vcscommand.txt /*:VCSRevert* +:VCSReview vcscommand.txt /*:VCSReview* +:VCSStatus vcscommand.txt /*:VCSStatus* +:VCSUnlock vcscommand.txt /*:VCSUnlock* +:VCSUpdate vcscommand.txt /*:VCSUpdate* +:VCSVimDiff vcscommand.txt /*:VCSVimDiff* +ExtractSnips() snipMate.txt /*ExtractSnips()* +ExtractSnipsFile() snipMate.txt /*ExtractSnipsFile()* +Filename() snipMate.txt /*Filename()* +NERDTree NERD_tree.txt /*NERDTree* +NERDTree-? NERD_tree.txt /*NERDTree-?* +NERDTree-A NERD_tree.txt /*NERDTree-A* +NERDTree-B NERD_tree.txt /*NERDTree-B* +NERDTree-C NERD_tree.txt /*NERDTree-C* +NERDTree-C-J NERD_tree.txt /*NERDTree-C-J* +NERDTree-C-K NERD_tree.txt /*NERDTree-C-K* +NERDTree-D NERD_tree.txt /*NERDTree-D* +NERDTree-F NERD_tree.txt /*NERDTree-F* +NERDTree-I NERD_tree.txt /*NERDTree-I* +NERDTree-J NERD_tree.txt /*NERDTree-J* +NERDTree-K NERD_tree.txt /*NERDTree-K* +NERDTree-O NERD_tree.txt /*NERDTree-O* +NERDTree-P NERD_tree.txt /*NERDTree-P* +NERDTree-R NERD_tree.txt /*NERDTree-R* +NERDTree-T NERD_tree.txt /*NERDTree-T* +NERDTree-U NERD_tree.txt /*NERDTree-U* +NERDTree-X NERD_tree.txt /*NERDTree-X* +NERDTree-cd NERD_tree.txt /*NERDTree-cd* +NERDTree-contents NERD_tree.txt /*NERDTree-contents* +NERDTree-e NERD_tree.txt /*NERDTree-e* +NERDTree-f NERD_tree.txt /*NERDTree-f* +NERDTree-gi NERD_tree.txt /*NERDTree-gi* +NERDTree-go NERD_tree.txt /*NERDTree-go* +NERDTree-gs NERD_tree.txt /*NERDTree-gs* +NERDTree-i NERD_tree.txt /*NERDTree-i* +NERDTree-m NERD_tree.txt /*NERDTree-m* +NERDTree-o NERD_tree.txt /*NERDTree-o* +NERDTree-p NERD_tree.txt /*NERDTree-p* +NERDTree-q NERD_tree.txt /*NERDTree-q* +NERDTree-r NERD_tree.txt /*NERDTree-r* +NERDTree-s NERD_tree.txt /*NERDTree-s* +NERDTree-t NERD_tree.txt /*NERDTree-t* +NERDTree-u NERD_tree.txt /*NERDTree-u* +NERDTree-x NERD_tree.txt /*NERDTree-x* +NERDTreeAPI NERD_tree.txt /*NERDTreeAPI* +NERDTreeAbout NERD_tree.txt /*NERDTreeAbout* +NERDTreeAddKeyMap() NERD_tree.txt /*NERDTreeAddKeyMap()* +NERDTreeAddMenuItem() NERD_tree.txt /*NERDTreeAddMenuItem()* +NERDTreeAddMenuSeparator() NERD_tree.txt /*NERDTreeAddMenuSeparator()* +NERDTreeAddSubmenu() NERD_tree.txt /*NERDTreeAddSubmenu()* +NERDTreeBookmarkCommands NERD_tree.txt /*NERDTreeBookmarkCommands* +NERDTreeBookmarkTable NERD_tree.txt /*NERDTreeBookmarkTable* +NERDTreeBookmarks NERD_tree.txt /*NERDTreeBookmarks* +NERDTreeChangelog NERD_tree.txt /*NERDTreeChangelog* +NERDTreeCredits NERD_tree.txt /*NERDTreeCredits* +NERDTreeFunctionality NERD_tree.txt /*NERDTreeFunctionality* +NERDTreeGlobalCommands NERD_tree.txt /*NERDTreeGlobalCommands* +NERDTreeInvalidBookmarks NERD_tree.txt /*NERDTreeInvalidBookmarks* +NERDTreeKeymapAPI NERD_tree.txt /*NERDTreeKeymapAPI* +NERDTreeLicense NERD_tree.txt /*NERDTreeLicense* +NERDTreeMappings NERD_tree.txt /*NERDTreeMappings* +NERDTreeMenu NERD_tree.txt /*NERDTreeMenu* +NERDTreeMenuAPI NERD_tree.txt /*NERDTreeMenuAPI* +NERDTreeOptionDetails NERD_tree.txt /*NERDTreeOptionDetails* +NERDTreeOptionSummary NERD_tree.txt /*NERDTreeOptionSummary* +NERDTreeOptions NERD_tree.txt /*NERDTreeOptions* +NERDTreeRender() NERD_tree.txt /*NERDTreeRender()* +NERD_tree.txt NERD_tree.txt /*NERD_tree.txt* +ResetSnippets() snipMate.txt /*ResetSnippets()* +Tlist_Get_Tag_Prototype_By_Line() taglist.txt /*Tlist_Get_Tag_Prototype_By_Line()* +Tlist_Get_Tagname_By_Line() taglist.txt /*Tlist_Get_Tagname_By_Line()* +Tlist_Set_App() taglist.txt /*Tlist_Set_App()* +Tlist_Update_File_Tags() taglist.txt /*Tlist_Update_File_Tags()* +VCSCommandCVSDiffOpt vcscommand.txt /*VCSCommandCVSDiffOpt* +VCSCommandCVSExec vcscommand.txt /*VCSCommandCVSExec* +VCSCommandCommitOnWrite vcscommand.txt /*VCSCommandCommitOnWrite* +VCSCommandDeleteOnHide vcscommand.txt /*VCSCommandDeleteOnHide* +VCSCommandDiffSplit vcscommand.txt /*VCSCommandDiffSplit* +VCSCommandDisableAll vcscommand.txt /*VCSCommandDisableAll* +VCSCommandDisableExtensionMappings vcscommand.txt /*VCSCommandDisableExtensionMappings* +VCSCommandDisableMappings vcscommand.txt /*VCSCommandDisableMappings* +VCSCommandDisableMenu vcscommand.txt /*VCSCommandDisableMenu* +VCSCommandEdit vcscommand.txt /*VCSCommandEdit* +VCSCommandEnableBufferSetup vcscommand.txt /*VCSCommandEnableBufferSetup* +VCSCommandMapPrefix vcscommand.txt /*VCSCommandMapPrefix* +VCSCommandMappings vcscommand.txt /*VCSCommandMappings* +VCSCommandMenuPriority vcscommand.txt /*VCSCommandMenuPriority* +VCSCommandMenuRoot vcscommand.txt /*VCSCommandMenuRoot* +VCSCommandResultBufferNameExtension vcscommand.txt /*VCSCommandResultBufferNameExtension* +VCSCommandResultBufferNameFunction vcscommand.txt /*VCSCommandResultBufferNameFunction* +VCSCommandSVKExec vcscommand.txt /*VCSCommandSVKExec* +VCSCommandSVNDiffExt vcscommand.txt /*VCSCommandSVNDiffExt* +VCSCommandSVNDiffOpt vcscommand.txt /*VCSCommandSVNDiffOpt* +VCSCommandSVNExec vcscommand.txt /*VCSCommandSVNExec* +VCSCommandSplit vcscommand.txt /*VCSCommandSplit* +VCSCommandVCSTypeOverride vcscommand.txt /*VCSCommandVCSTypeOverride* +b:VCSCommandCommand vcscommand.txt /*b:VCSCommandCommand* +b:VCSCommandOriginalBuffer vcscommand.txt /*b:VCSCommandOriginalBuffer* +b:VCSCommandSourceFile vcscommand.txt /*b:VCSCommandSourceFile* +b:VCSCommandVCSType vcscommand.txt /*b:VCSCommandVCSType* +bufexplorer bufexplorer.txt /*bufexplorer* +bufexplorer-changelog bufexplorer.txt /*bufexplorer-changelog* +bufexplorer-credits bufexplorer.txt /*bufexplorer-credits* +bufexplorer-customization bufexplorer.txt /*bufexplorer-customization* +bufexplorer-installation bufexplorer.txt /*bufexplorer-installation* +bufexplorer-todo bufexplorer.txt /*bufexplorer-todo* +bufexplorer-usage bufexplorer.txt /*bufexplorer-usage* +bufexplorer-windowlayout bufexplorer.txt /*bufexplorer-windowlayout* +bufexplorer.txt bufexplorer.txt /*bufexplorer.txt* +buffer-explorer bufexplorer.txt /*buffer-explorer* +cvscommand-changes vcscommand.txt /*cvscommand-changes* +g:bufExplorerChgWin bufexplorer.txt /*g:bufExplorerChgWin* +g:bufExplorerDefaultHelp bufexplorer.txt /*g:bufExplorerDefaultHelp* +g:bufExplorerDetailedHelp bufexplorer.txt /*g:bufExplorerDetailedHelp* +g:bufExplorerFindActive bufexplorer.txt /*g:bufExplorerFindActive* +g:bufExplorerFuncRef bufexplorer.txt /*g:bufExplorerFuncRef* +g:bufExplorerReverseSort bufexplorer.txt /*g:bufExplorerReverseSort* +g:bufExplorerShowDirectories bufexplorer.txt /*g:bufExplorerShowDirectories* +g:bufExplorerShowRelativePath bufexplorer.txt /*g:bufExplorerShowRelativePath* +g:bufExplorerShowTabBuffer bufexplorer.txt /*g:bufExplorerShowTabBuffer* +g:bufExplorerShowUnlisted bufexplorer.txt /*g:bufExplorerShowUnlisted* +g:bufExplorerSortBy bufexplorer.txt /*g:bufExplorerSortBy* +g:bufExplorerSplitBelow bufexplorer.txt /*g:bufExplorerSplitBelow* +g:bufExplorerSplitOutPathName bufexplorer.txt /*g:bufExplorerSplitOutPathName* +g:bufExplorerSplitRight bufexplorer.txt /*g:bufExplorerSplitRight* +g:snippets_dir snipMate.txt /*g:snippets_dir* +g:snips_author snipMate.txt /*g:snips_author* +git-vim git-vim.txt /*git-vim* +git-vim-commands git-vim.txt /*git-vim-commands* +git-vim-contents git-vim.txt /*git-vim-contents* +git-vim-keymaps git-vim.txt /*git-vim-keymaps* +git-vim-license git-vim.txt /*git-vim-license* +git-vim.txt git-vim.txt /*git-vim.txt* +i_CTRL-R_ snipMate.txt /*i_CTRL-R_* +indexer indexer.txt /*indexer* +indexer-commands indexer.txt /*indexer-commands* +indexer-options indexer.txt /*indexer-options* +indexer-plugin indexer.txt /*indexer-plugin* +indexer.txt indexer.txt /*indexer.txt* +list-snippets snipMate.txt /*list-snippets* +multi_snip snipMate.txt /*multi_snip* +project project.txt /*project* +project-adding-mappings project.txt /*project-adding-mappings* +project-example project.txt /*project-example* +project-flags project.txt /*project-flags* +project-inheritance project.txt /*project-inheritance* +project-invoking project.txt /*project-invoking* +project-mappings project.txt /*project-mappings* +project-plugin project.txt /*project-plugin* +project-settings project.txt /*project-settings* +project-syntax project.txt /*project-syntax* +project-tips project.txt /*project-tips* +project.txt project.txt /*project.txt* +snipMate snipMate.txt /*snipMate* +snipMate-$# snipMate.txt /*snipMate-$#* +snipMate-${#:} snipMate.txt /*snipMate-${#:}* +snipMate-${#} snipMate.txt /*snipMate-${#}* +snipMate-author snipMate.txt /*snipMate-author* +snipMate-commands snipMate.txt /*snipMate-commands* +snipMate-contact snipMate.txt /*snipMate-contact* +snipMate-description snipMate.txt /*snipMate-description* +snipMate-disadvantages snipMate.txt /*snipMate-disadvantages* +snipMate-expandtab snipMate.txt /*snipMate-expandtab* +snipMate-features snipMate.txt /*snipMate-features* +snipMate-filename snipMate.txt /*snipMate-filename* +snipMate-indenting snipMate.txt /*snipMate-indenting* +snipMate-placeholders snipMate.txt /*snipMate-placeholders* +snipMate-remap snipMate.txt /*snipMate-remap* +snipMate-settings snipMate.txt /*snipMate-settings* +snipMate-usage snipMate.txt /*snipMate-usage* +snipMate.txt snipMate.txt /*snipMate.txt* +snippet snipMate.txt /*snippet* +snippet-syntax snipMate.txt /*snippet-syntax* +snippets snipMate.txt /*snippets* +taglist-commands taglist.txt /*taglist-commands* +taglist-debug taglist.txt /*taglist-debug* +taglist-extend taglist.txt /*taglist-extend* +taglist-faq taglist.txt /*taglist-faq* +taglist-functions taglist.txt /*taglist-functions* +taglist-install taglist.txt /*taglist-install* +taglist-internet taglist.txt /*taglist-internet* +taglist-intro taglist.txt /*taglist-intro* +taglist-keys taglist.txt /*taglist-keys* +taglist-license taglist.txt /*taglist-license* +taglist-menu taglist.txt /*taglist-menu* +taglist-options taglist.txt /*taglist-options* +taglist-requirements taglist.txt /*taglist-requirements* +taglist-session taglist.txt /*taglist-session* +taglist-todo taglist.txt /*taglist-todo* +taglist-using taglist.txt /*taglist-using* +taglist.txt taglist.txt /*taglist.txt* +vcscommand vcscommand.txt /*vcscommand* +vcscommand-buffer-management vcscommand.txt /*vcscommand-buffer-management* +vcscommand-buffer-variables vcscommand.txt /*vcscommand-buffer-variables* +vcscommand-bugs vcscommand.txt /*vcscommand-bugs* +vcscommand-commands vcscommand.txt /*vcscommand-commands* +vcscommand-config vcscommand.txt /*vcscommand-config* +vcscommand-contents vcscommand.txt /*vcscommand-contents* +vcscommand-customize vcscommand.txt /*vcscommand-customize* +vcscommand-events vcscommand.txt /*vcscommand-events* +vcscommand-install vcscommand.txt /*vcscommand-install* +vcscommand-intro vcscommand.txt /*vcscommand-intro* +vcscommand-manual vcscommand.txt /*vcscommand-manual* +vcscommand-mappings vcscommand.txt /*vcscommand-mappings* +vcscommand-mappings-override vcscommand.txt /*vcscommand-mappings-override* +vcscommand-naming vcscommand.txt /*vcscommand-naming* +vcscommand-options vcscommand.txt /*vcscommand-options* +vcscommand-ssh vcscommand.txt /*vcscommand-ssh* +vcscommand-ssh-config vcscommand.txt /*vcscommand-ssh-config* +vcscommand-ssh-env vcscommand.txt /*vcscommand-ssh-env* +vcscommand-ssh-other vcscommand.txt /*vcscommand-ssh-other* +vcscommand-ssh-wrapper vcscommand.txt /*vcscommand-ssh-wrapper* +vcscommand-statusline vcscommand.txt /*vcscommand-statusline* +vcscommand.txt vcscommand.txt /*vcscommand.txt* diff --git a/modules/vim/vim.dot.link/doc/vcscommand.txt b/modules/vim/vim.dot.link/doc/vcscommand.txt new file mode 100644 index 0000000..5e0c4c0 --- /dev/null +++ b/modules/vim/vim.dot.link/doc/vcscommand.txt @@ -0,0 +1,835 @@ +*vcscommand.txt* vcscommand +Copyright (c) Bob Hiestand + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to +deal in the Software without restriction, including without limitation the +rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +sell copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +IN THE SOFTWARE. + +For instructions on installing this file, type + :help add-local-help +inside Vim. + +Author: Bob Hiestand +Credits: Benji Fisher's excellent MatchIt documentation + +============================================================================== +1. Contents *vcscommand-contents* + + Installation : |vcscommand-install| + vcscommand Intro : |vcscommand| + vcscommand Manual : |vcscommand-manual| + Customization : |vcscommand-customize| + SSH "integration" : |vcscommand-ssh| + Changes from cvscommand : |cvscommand-changes| + Bugs : |vcscommand-bugs| + +============================================================================== + +2. vcscommand Installation *vcscommand-install* + +The vcscommand plugin comprises five files: vcscommand.vim, vcssvn.vim, +vcscvs.vim, vcssvk.vim and vcscommand.txt (this file). In order to install +the plugin, place the vcscommand.vim, vcssvn.vim, vcssvk.vim, and vcscvs.vim +files into a plugin directory in your runtime path (please see +|add-global-plugin| and |'runtimepath'|. + +This help file can be included in the VIM help system by copying it into a +'doc' directory in your runtime path and then executing the |:helptags| +command, specifying the full path of the 'doc' directory. Please see +|add-local-help| for more details. + +vcscommand may be customized by setting variables, creating maps, and +specifying event handlers. Please see |vcscommand-customize| for more +details. + +============================================================================== + +3. vcscommand Intro *vcscommand* + *vcscommand-intro* + +The vcscommand plugin provides global ex commands for manipulating +version-controlled source files, currently those controlled either by CVS or +Subversion. In general, each command operates on the current buffer and +accomplishes a separate source control function, such as update, commit, log, +and others (please see |vcscommand-commands| for a list of all available +commands). The results of each operation are displayed in a scratch buffer. +Several buffer variables are defined for those scratch buffers (please see +|vcscommand-buffer-variables|). + +The notion of "current file" means either the current buffer, or, in the case +of a directory buffer (such as Explorer or netrw buffers), the directory (and +all subdirectories) represented by the the buffer. + +For convenience, any vcscommand invoked on a vcscommand scratch buffer acts as +though it was invoked on the original file and splits the screen so that the +output appears in a new window. + +Many of the commands accept revisions as arguments. By default, most operate +on the most recent revision on the current branch if no revision is specified. + +Each vcscommand is mapped to a key sequence starting with the || +keystroke. The default mappings may be overridden by supplying different +mappings before the plugin is loaded, such as in the vimrc, in the standard +fashion for plugin mappings. For examples, please see +|vcscommand-mappings-override|. + +The vcscommand plugin may be configured in several ways. For more details, +please see |vcscommand-customize|. + +============================================================================== + +4. vcscommand Manual *vcscommand-manual* + +4.1 vcscommand commands *vcscommand-commands* + +vcscommand defines the following commands: + +|:VCSAdd| +|:VCSAnnotate| +|:VCSBlame| +|:VCSCommit| +|:VCSDelete| +|:VCSDiff| +|:VCSGotoOriginal| +|:VCSLog| +|:VCSRemove| +|:VCSRevert| +|:VCSReview| +|:VCSStatus| +|:VCSUpdate| +|:VCSVimDiff| + +The following commands are specific to CVS files: + +|:CVSEdit| +|:CVSEditors| +|:CVSUnedit| +|:CVSWatch| +|:CVSWatchAdd| +|:CVSWatchOn| +|:CVSWatchOff| +|:CVSWatchRemove| +|:CVSWatchers| + +:VCSAdd *:VCSAdd* + +This command adds the current file to source control. Please note, this does +not commit the newly-added file. All parameters to the command are passed to +the underlying VCS. + +:VCSAnnotate[!] *:VCSAnnotate* + +This command displays the current file with each line annotated with the +version in which it was most recently changed. If an argument is given, the +argument is used as a revision number to display. If not given an argument, +it uses the most recent version of the file (on the current branch, if under +CVS control). Additionally, if the current buffer is a VCSAnnotate buffer +already, the version number on the current line is used. + +If '!' is used, the view of the annotated buffer is split so that the +annotation is in a separate window from the content, and each is highlighted +separately. + +For CVS buffers, the 'VCSCommandCVSAnnotateParent' option, if set to non-zero, +will cause the above behavior to change. Instead of annotating the version on +the current line, the parent revision is used instead, crossing branches if +necessary. + +With no arguments the cursor will jump to the line in the annotated buffer +corresponding to the current line in the source buffer. + +:VCSBlame[!] *:VCSBlame* + +Alias for |:VCSAnnotate|. + +:VCSCommit[!] *:VCSCommit* + +This command commits changes to the current file to source control. + +If called with arguments, the arguments are the log message. + +If '!' is used, an empty log message is committed. + +If called with no arguments, this is a two-step command. The first step opens +a buffer to accept a log message. When that buffer is written, it is +automatically closed and the file is committed using the information from that +log message. The commit can be abandoned if the log message buffer is deleted +or wiped before being written. + +Alternatively, the mapping that is used to invoke :VCSCommit (by default +||cc, please see |vcscommand-mappings|) can be used in the log message +buffer in Normal mode to immediately commit. This is useful if the +|VCSCommandCommitOnWrite| variable is set to 0 to disable the normal +commit-on-write behavior. + +:VCSDelete *:VCSDelete* + +Deletes the current file and removes it from source control. All parameters +to the command are passed to the underlying VCS. + +:VCSDiff *:VCSDiff* + +With no arguments, this displays the differences between the current file and +its parent version under source control in a new scratch buffer. + +With one argument, the diff is performed on the current file against the +specified revision. + +With two arguments, the diff is performed between the specified revisions of +the current file. + +For CVS, this command uses the |VCSCommandCVSDiffOpt| variable to specify diff +options. If that variable does not exist, a plugin-specific default is used. +If you wish to have no options, then set it to the empty string. + +For SVN, this command uses the |VCSCommandSVNDiffOpt| variable to specify diff +options. If that variable does not exist, the SVN default is used. +Additionally, |VCSCommandSVNDiffExt| can be used to select an external diff +application. + +:VCSGotoOriginal *:VCSGotoOriginal* + +This command jumps to the source buffer if the current buffer is a VCS scratch +buffer. + +:VCSGotoOriginal! + +Like ":VCSGotoOriginal" but also executes :bufwipeout on all VCS scrach +buffers associated with the original file. + +:VCSInfo *:VCSInfo* + +This command displays extended information about the current file in a new +scratch buffer. + +:VCSLock *:VCSLock* + +This command locks the current file in order to prevent other users from +concurrently modifying it. The exact semantics of this command depend on the +underlying VCS. This does nothing in CVS. All parameters are passed to the +underlying VCS. + +:VCSLog *:VCSLog* + +Displays the version history of the current file in a new scratch buffer. If +there is one parameter supplied, it is taken as as a revision parameters to be +passed through to the underlying VCS. Otherwise, all parameters are passed to +the underlying VCS. + +:VCSRemove *:VCSRemove* + +Alias for |:VCSDelete|. + +:VCSRevert *:VCSRevert* + +This command replaces the current file with the most recent version from the +repository in order to wipe out any undesired changes. + +:VCSReview *:VCSReview* + +Displays a particular version of the current file in a new scratch buffer. If +no argument is given, the most recent version of the file on the current +branch is retrieved. + +:VCSStatus *:VCSStatus* + +Displays versioning information about the current file in a new scratch +buffer. All parameters are passed to the underlying VCS. + + +:VCSUnlock *:VCSUnlock* + +Unlocks the current file in order to allow other users from concurrently +modifying it. The exact semantics of this command depend on the underlying +VCS. All parameters are passed to the underlying VCS. + +:VCSUpdate *:VCSUpdate* + +Updates the current file with any relevant changes from the repository. This +intentionally does not automatically reload the current buffer, though vim +should prompt the user to do so if the underlying file is altered by this +command. + +:VCSVimDiff *:VCSVimDiff* + +Uses vimdiff to display differences between versions of the current file. + +If no revision is specified, the most recent version of the file on the +current branch is used. With one argument, that argument is used as the +revision as above. With two arguments, the differences between the two +revisions is displayed using vimdiff. + +With either zero or one argument, the original buffer is used to perform the +vimdiff. When the scratch buffer is closed, the original buffer will be +returned to normal mode. + +Once vimdiff mode is started using the above methods, additional vimdiff +buffers may be added by passing a single version argument to the command. +There may be up to 4 vimdiff buffers total. + +Using the 2-argument form of the command resets the vimdiff to only those 2 +versions. Additionally, invoking the command on a different file will close +the previous vimdiff buffers. + +:CVSEdit *:CVSEdit* + +This command performs "cvs edit" on the current file. Yes, the output buffer +in this case is almost completely useless. + +:CVSEditors *:CVSEditors* + +This command performs "cvs edit" on the current file. + +:CVSUnedit *:CVSUnedit* + +Performs "cvs unedit" on the current file. Again, yes, the output buffer here +is basically useless. + +:CVSWatch *:CVSWatch* + +This command takes an argument which must be one of [on|off|add|remove]. The +command performs "cvs watch" with the given argument on the current file. + +:CVSWatchAdd *:CVSWatchAdd* + +This command is an alias for ":CVSWatch add" + +:CVSWatchOn *:CVSWatchOn* + +This command is an alias for ":CVSWatch on" + +:CVSWatchOff *:CVSWatchOff* + +This command is an alias for ":CVSWatch off" + +:CVSWatchRemove *:CVSWatchRemove* + +This command is an alias for ":CVSWatch remove" + +:CVSWatchers *:CVSWatchers* + +This command performs "cvs watchers" on the current file. + +4.2 Mappings *vcscommand-mappings* + +By default, a mapping is defined for each command. These mappings execute the +default (no-argument) form of each command. + +||ca VCSAdd +||cn VCSAnnotate +||cN VCSAnnotate! +||cc VCSCommit +||cD VCSDelete +||cd VCSDiff +||cg VCSGotoOriginal +||cG VCSGotoOriginal! +||ci VCSInfo +||cl VCSLog +||cL VCSLock +||cr VCSReview +||cs VCSStatus +||cu VCSUpdate +||cU VCSUnlock +||cv VCSVimDiff + +Only for CVS buffers: + +||ce CVSEdit +||cE CVSEditors +||ct CVSUnedit +||cwv CVSWatchers +||cwa CVSWatchAdd +||cwn CVSWatchOn +||cwf CVSWatchOff +||cwf CVSWatchRemove + + *vcscommand-mappings-override* + +The default mappings can be overridden by user-provided instead by mapping to +CommandName. This is especially useful when these mappings collide with +other existing mappings (vim will warn of this during plugin initialization, +but will not clobber the existing mappings). + +There are three methods for controlling mapping: + +First, maps can be overriden for individual commands. For instance, to +override the default mapping for :VCSAdd to set it to '\add', add the +following to the vimrc: + +nmap \add VCSAdd + +Second, the default map prefix ('c') can be overridden by defining the +|VCSCommandMapPrefix| variable. + +Third, the entire set of default maps can be overridden by defining the +|VCSCommandMappings| variable. + + +4.3 Automatic buffer variables *vcscommand-buffer-variables* + +Several buffer variables are defined in each vcscommand result buffer. These +may be useful for additional customization in callbacks defined in the event +handlers (please see |vcscommand-events|). + +The following variables are automatically defined: + +b:VCSCommandOriginalBuffer *b:VCSCommandOriginalBuffer* + +This variable is set to the buffer number of the source file. + +b:VCSCommandCommand *b:VCSCommandCommand* + +This variable is set to the name of the vcscommand that created the result +buffer. + +b:VCSCommandSourceFile *b:VCSCommandSourceFile* + +This variable is set to the name of the original file under source control. + +b:VCSCommandVCSType *b:VCSCommandVCSType* + +This variable is set to the type of the source control. This variable is also +set on the original file itself. +============================================================================== + +5. Configuration and customization *vcscommand-customize* + *vcscommand-config* + +The vcscommand plugin can be configured in several ways: by setting +configuration variables (see |vcscommand-options|) or by defining vcscommand +event handlers (see |vcscommand-events|). Additionally, the vcscommand plugin +supports a customized status line (see |vcscommand-statusline| and +|vcscommand-buffer-management|). + +5.1 vcscommand configuration variables *vcscommand-options* + +Several variables affect the plugin's behavior. These variables are checked +at time of execution, and may be defined at the window, buffer, or global +level and are checked in that order of precedence. + + +The following variables are available: + +|VCSCommandCommitOnWrite| +|VCSCommandCVSDiffOpt| +|VCSCommandCVSExec| +|VCSCommandDeleteOnHide| +|VCSCommandDiffSplit| +|VCSCommandDisableAll| +|VCSCommandDisableMappings| +|VCSCommandDisableExtensionMappings| +|VCSCommandDisableMenu| +|VCSCommandEdit| +|VCSCommandEnableBufferSetup| +|VCSCommandMappings| +|VCSCommandMapPrefix| +|VCSCommandMenuPriority| +|VCSCommandMenuRoot| +|VCSCommandResultBufferNameExtension| +|VCSCommandResultBufferNameFunction| +|VCSCommandSplit| +|VCSCommandSVKExec| +|VCSCommandSVNDiffExt| +|VCSCommandSVNDiffOpt| +|VCSCommandSVNExec| +|VCSCommandVCSTypeOverride| + +VCSCommandCommitOnWrite *VCSCommandCommitOnWrite* + +This variable, if set to a non-zero value, causes the pending commit +to take place immediately as soon as the log message buffer is written. +If set to zero, only the VCSCommit mapping will cause the pending commit to +occur. If not set, it defaults to 1. + +VCSCommandCVSExec *VCSCommandCVSExec* + +This variable controls the executable used for all CVS commands If not set, +it defaults to "cvs". + +VCSCommandDeleteOnHide *VCSCommandDeleteOnHide* + +This variable, if set to a non-zero value, causes the temporary result buffers +to automatically delete themselves when hidden. + +VCSCommandCVSDiffOpt *VCSCommandCVSDiffOpt* + +This variable, if set, determines the options passed to the diff command of +CVS. If not set, it defaults to 'u'. + +VCSCommandDiffSplit *VCSCommandDiffSplit* + +This variable overrides the |VCSCommandSplit| variable, but only for buffers +created with |:VCSVimDiff|. + +VCSCommandDisableAll *VCSCommandDisableAll* + +This variable, if set, prevents the plugin or any extensions from loading at +all. This is useful when a single runtime distribution is used on multiple +systems with varying versions. + +VCSCommandDisableMappings *VCSCommandDisableMappings* + +This variable, if set to a non-zero value, prevents the default command +mappings from being set. This supercedes +|VCSCommandDisableExtensionMappings|. + +VCSCommandDisableExtensionMappings *VCSCommandDisableExtensionMappings* + +This variable, if set to a non-zero value, prevents the default command +mappings from being set for commands specific to an individual VCS. + +VCSCommandEdit *VCSCommandEdit* + +This variable controls whether the original buffer is replaced ('edit') or +split ('split'). If not set, it defaults to 'split'. + +VCSCommandDisableMenu *VCSCommandDisableMenu* + +This variable, if set to a non-zero value, prevents the default command menu +from being set. + +VCSCommandEnableBufferSetup *VCSCommandEnableBufferSetup* + +This variable, if set to a non-zero value, activates VCS buffer management +mode see (|vcscommand-buffer-management|). This mode means that the +'VCSCommandBufferInfo' variable is filled with version information if the file +is VCS-controlled. This is useful for displaying version information in the +status bar. + +VCSCommandMappings *VCSCommandMappings* + +This variable, if set, overrides the default mappings used for shortcuts. It +should be a List of 2-element Lists, each containing a shortcut and function +name pair. The value of the '|VCSCommandMapPrefix|' variable will be added to +each shortcut. + +VCSCommandMapPrefix *VCSCommandMapPrefix* + +This variable, if set, overrides the default mapping prefix ('c'). +This allows customization of the mapping space used by the vcscommand +shortcuts. + +VCSCommandMenuPriority *VCSCommandMenuPriority* + +This variable, if set, overrides the default menu priority '' (empty) + +VCSCommandMenuRoot *VCSCommandMenuRoot* + +This variable, if set, overrides the default menu root 'Plugin.VCS' + +VCSCommandResultBufferNameExtension *VCSCommandResultBufferNameExtension* + +This variable, if set to a non-blank value, is appended to the name of the VCS +command output buffers. For example, '.vcs'. Using this option may help +avoid problems caused by autocommands dependent on file extension. + +VCSCommandResultBufferNameFunction *VCSCommandResultBufferNameFunction* + +This variable, if set, specifies a custom function for naming VCS command +output buffers. This function is expected to return the new buffer name, and +will be passed the following arguments: + + command - name of the VCS command being executed (such as 'Log' or + 'Diff'). + + originalBuffer - buffer number of the source file. + + vcsType - type of VCS controlling this file (such as 'CVS' or 'SVN'). + + statusText - extra text associated with the VCS action (such as version + numbers). + +VCSCommandSplit *VCSCommandSplit* + +This variable controls the orientation of the various window splits that +may occur. + +If set to 'horizontal', the resulting windows will be on stacked on top of +one another. If set to 'vertical', the resulting windows will be +side-by-side. If not set, it defaults to 'horizontal' for all but +VCSVimDiff windows. VCSVimDiff windows default to the user's 'diffopt' +setting, if set, otherwise 'vertical'. + +VCSCommandSVKExec *VCSCommandSVKExec* + +This variable controls the executable used for all SVK commands If not set, +it defaults to "svk". + +VCSCommandSVNDiffExt *VCSCommandSVNDiffExt* + +This variable, if set, is passed to SVN via the --diff-cmd command to select +an external application for performing the diff. + +VCSCommandSVNDiffOpt *VCSCommandSVNDiffOpt* + +This variable, if set, determines the options passed with the '-x' parameter +to the SVN diff command. If not set, no options are passed. + +VCSCommandSVNExec *VCSCommandSVNExec* + +This variable controls the executable used for all SVN commands If not set, +it defaults to "svn". + +VCSCommandVCSTypeOverride *VCSCommandVCSTypeOverride* + +This variable allows the VCS type detection to be overridden on a path-by-path +basis. The value of this variable is expected to be a List of Lists. Each +item in the high-level List is a List containing two elements. The first +element is a regular expression that will be matched against the full file +name of a given buffer. If it matches, the second element will be used as the +VCS type. + +5.2 VCSCommand events *vcscommand-events* + +For additional customization, vcscommand can trigger user-defined events. +Event handlers are provided by defining User event autocommands (see +|autocommand|, |User|) in the vcscommand group with patterns matching the +event name. + +For instance, the following could be added to the vimrc to provide a 'q' +mapping to quit a vcscommand scratch buffer: + +augroup VCSCommand + au User VCSBufferCreated silent! nmap q :bwipeout +augroup END + +The following hooks are available: + +VCSBufferCreated This event is fired just after a vcscommand + result buffer is created and populated. It is + executed within the context of the vcscommand + buffer. The vcscommand buffer variables may + be useful for handlers of this event (please + see |vcscommand-buffer-variables|). + +VCSBufferSetup This event is fired just after vcscommand buffer + setup occurs, if enabled. + +VCSPluginInit This event is fired when the vcscommand plugin + first loads. + +VCSPluginFinish This event is fired just after the vcscommand + plugin loads. + +VCSVimDiffFinish This event is fired just after the VCSVimDiff + command executes to allow customization of, + for instance, window placement and focus. + +Additionally, there is another hook which is used internally to handle loading +the multiple scripts in order. This hook should probably not be used by an +end user without a good idea of how it works. Among other things, any events +associated with this hook are cleared after they are executed (during +vcscommand.vim script initialization). + +VCSLoadExtensions This event is fired just before the + VCSPluginFinish. It is used internally to + execute any commands from the VCS + implementation plugins that needs to be + deferred until the primary plugin is + initialized. + +5.3 vcscommand buffer naming *vcscommand-naming* + +vcscommand result buffers use the following naming convention: +[{VCS type} {VCS command} {Source file name}] + +If additional buffers are created that would otherwise conflict, a +distinguishing number is added: + +[{VCS type} {VCS command} {Source file name}] (1,2, etc) + +5.4 vcscommand status line support *vcscommand-statusline* + +It is intended that the user will customize the |'statusline'| option to +include vcscommand result buffer attributes. A sample function that may be +used in the |'statusline'| option is provided by the plugin, +VCSCommandGetStatusLine(). In order to use that function in the status line, do +something like the following: + +set statusline=%<%f\ %{VCSCommandGetStatusLine()}\ %h%m%r%=%l,%c%V\ %P + +of which %{VCSCommandGetStatusLine()} is the relevant portion. + +The sample VCSCommandGetStatusLine() function handles both vcscommand result +buffers and VCS-managed files if vcscommand buffer management is enabled +(please see |vcscommand-buffer-management|). + +5.5 vcscommand buffer management *vcscommand-buffer-management* + +The vcscommand plugin can operate in buffer management mode, which means that +it attempts to set a buffer variable ('VCSCommandBufferInfo') upon entry into +a buffer. This is rather slow because it means that the VCS will be invoked +at each entry into a buffer (during the |BufEnter| autocommand). + +This mode is disabled by default. In order to enable it, set the +|VCSCommandEnableBufferSetup| variable to a true (non-zero) value. Enabling +this mode simply provides the buffer variable mentioned above. The user must +explicitly include information from the variable in the |'statusline'| option +if they are to appear in the status line (but see |vcscommand-statusline| for +a simple way to do that). + +The 'VCSCommandBufferInfo' variable is a list which contains, in order, the +revision of the current file, the latest revision of the file in the +repository, and (for CVS) the name of the branch. If those values cannot be +determined, the list is a single element: 'Unknown'. + +============================================================================== + +6. SSH "integration" *vcscommand-ssh* + +The following instructions are intended for use in integrating the +vcscommand.vim plugin with an SSH-based CVS environment. + +Familiarity with SSH and CVS are assumed. + +These instructions assume that the intent is to have a message box pop up in +order to allow the user to enter a passphrase. If, instead, the user is +comfortable using certificate-based authentication, then only instructions +6.1.1 and 6.1.2 (and optionally 6.1.4) need to be followed; ssh should then +work transparently. + +6.1 Environment settings *vcscommand-ssh-env* + +6.1.1 CVSROOT should be set to something like: + + :ext:user@host:/path_to_repository + +6.1.2 CVS_RSH should be set to: + + ssh + + Together, those settings tell CVS to use ssh as the transport when + performing CVS calls. + +6.1.3 SSH_ASKPASS should be set to the password-dialog program. In my case, + running gnome, it's set to: + + /usr/libexec/openssh/gnome-ssh-askpass + + This tells SSH how to get passwords if no input is available. + +6.1.4 OPTIONAL. You may need to set SSH_SERVER to the location of the cvs + executable on the remote (server) machine. + +6.2 CVS wrapper program *vcscommand-ssh-wrapper* + +Now you need to convince SSH to use the password-dialog program. This means +you need to execute SSH (and therefore CVS) without standard input. The +following script is a simple perl wrapper that dissasociates the CVS command +from the current terminal. Specific steps to do this may vary from system to +system; the following example works for me on linux. + +#!/usr/bin/perl -w +use strict; +use POSIX qw(setsid); +open STDIN, '/dev/null'; +fork and do {wait; exit;}; +setsid; +exec('cvs', @ARGV); + +6.3 Configuring vcscommand.vim *vcscommand-ssh-config* + +At this point, you should be able to use your wrapper script to invoke CVS with +various commands, and get the password dialog. All that's left is to make CVS +use your newly-created wrapper script. + +6.3.1 Tell vcscommand.vim what CVS executable to use. The easiest way to do this + is globally, by putting the following in your .vimrc: + + let VCSCommandCVSExec=/path/to/cvs/wrapper/script + +6.4 Where to go from here *vcscommand-ssh-other* + +The script given above works even when non-SSH CVS connections are used, +except possibly when interactively entering the message for CVS commit log +(depending on the editor you use... VIM works fine). Since the vcscommand.vim +plugin handles that message without a terminal, the wrapper script can be used +all the time. + +This allows mixed-mode operation, where some work is done with SSH-based CVS +repositories, and others with pserver or local access. + +It is possible, though beyond the scope of the plugin, to dynamically set the +CVS executable based on the CVSROOT for the file being edited. The user +events provided (such as VCSBufferCreated and VCSBufferSetup) can be used to +set a buffer-local value (b:VCSCommandCVSExec) to override the CVS executable +on a file-by-file basis. Alternatively, much the same can be done (less +automatically) by the various project-oriented plugins out there. + +It is highly recommended for ease-of-use that certificates with no passphrase +or ssh-agent are employed so that the user is not given the password prompt +too often. + +============================================================================== + +7. Changes from cvscommand *cvscommand-changes* + +1. Require Vim 7 in order to leverage several convenient features; also +because I wanted to play with Vim 7. + +2. Renamed commands to start with 'VCS' instead of 'CVS'. The exceptions are +the 'CVSEdit' and 'CVSWatch' family of commands, which are specific to CVS. + +3. Renamed options, events to start with 'VCSCommand'. + +4. Removed option to jump to the parent version of the current line in an +annotated buffer, as opposed to the version on the current line. This made +little sense in the branching scheme used by subversion, where jumping to a +parent branch required finding a different location in the repository. It +didn't work consistently in CVS anyway. + +5. Removed option to have nameless scratch buffers. + +6. Changed default behavior of scratch buffers to split the window instead of +displaying in the current window. This may still be overridden using the +'VCSCommandEdit' option. + +7. Split plugin into multiple plugins. + +8. Added 'VCSLock' and 'VCSUnlock' commands. These are implemented for +subversion but not for CVS. These were not kept specific to subversion as they +seemed more general in nature and more likely to be supported by any future VCS +supported by this plugin. + +9. Changed name of buffer variables set by commands. + +'b:cvsOrigBuffNR' became 'b:VCSCommandOriginalBuffer' +'b:cvscmd' became 'b:VCSCommandCommand' + +10. Added new automatic variables to command result buffers. + +'b:VCSCommandSourceFile' +'b:VCSCommandVCSType' + +============================================================================== + +8. Known bugs *vcscommand-bugs* + +Please let me know if you run across any. + +CVSUnedit may, if a file is changed from the repository, provide prompt text +to determine whether the changes should be thrown away. Currently, that text +shows up in the CVS result buffer as information; there is no way for the user +to actually respond to the prompt and the CVS unedit command does nothing. If +this really bothers anyone, please let me know. + +VCSVimDiff, when using the original (real) source buffer as one of the diff +buffers, uses some hacks to try to restore the state of the original buffer +when the scratch buffer containing the other version is destroyed. There may +still be bugs in here, depending on many configuration details. + +vim:tw=78:ts=8:ft=help -- cgit v1.2.3