diff options
Diffstat (limited to 'vendors/php-openid/Auth/OpenID/Consumer.php')
| -rw-r--r-- | vendors/php-openid/Auth/OpenID/Consumer.php | 2234 |
1 files changed, 2234 insertions, 0 deletions
diff --git a/vendors/php-openid/Auth/OpenID/Consumer.php b/vendors/php-openid/Auth/OpenID/Consumer.php new file mode 100644 index 000000000..bffed4d62 --- /dev/null +++ b/vendors/php-openid/Auth/OpenID/Consumer.php @@ -0,0 +1,2234 @@ +<?php + +/** + * This module documents the main interface with the OpenID consumer + * library. The only part of the library which has to be used and + * isn't documented in full here is the store required to create an + * Auth_OpenID_Consumer instance. More on the abstract store type and + * concrete implementations of it that are provided in the + * documentation for the Auth_OpenID_Consumer constructor. + * + * OVERVIEW + * + * The OpenID identity verification process most commonly uses the + * following steps, as visible to the user of this library: + * + * 1. The user enters their OpenID into a field on the consumer's + * site, and hits a login button. + * 2. The consumer site discovers the user's OpenID server using the + * YADIS protocol. + * 3. The consumer site sends the browser a redirect to the identity + * server. This is the authentication request as described in + * the OpenID specification. + * 4. The identity server's site sends the browser a redirect back + * to the consumer site. This redirect contains the server's + * response to the authentication request. + * + * The most important part of the flow to note is the consumer's site + * must handle two separate HTTP requests in order to perform the full + * identity check. + * + * LIBRARY DESIGN + * + * This consumer library is designed with that flow in mind. The goal + * is to make it as easy as possible to perform the above steps + * securely. + * + * At a high level, there are two important parts in the consumer + * library. The first important part is this module, which contains + * the interface to actually use this library. The second is the + * Auth_OpenID_Interface class, which describes the interface to use + * if you need to create a custom method for storing the state this + * library needs to maintain between requests. + * + * In general, the second part is less important for users of the + * library to know about, as several implementations are provided + * which cover a wide variety of situations in which consumers may use + * the library. + * + * This module contains a class, Auth_OpenID_Consumer, with methods + * corresponding to the actions necessary in each of steps 2, 3, and 4 + * described in the overview. Use of this library should be as easy + * as creating an Auth_OpenID_Consumer instance and calling the + * methods appropriate for the action the site wants to take. + * + * STORES AND DUMB MODE + * + * OpenID is a protocol that works best when the consumer site is able + * to store some state. This is the normal mode of operation for the + * protocol, and is sometimes referred to as smart mode. There is + * also a fallback mode, known as dumb mode, which is available when + * the consumer site is not able to store state. This mode should be + * avoided when possible, as it leaves the implementation more + * vulnerable to replay attacks. + * + * The mode the library works in for normal operation is determined by + * the store that it is given. The store is an abstraction that + * handles the data that the consumer needs to manage between http + * requests in order to operate efficiently and securely. + * + * Several store implementation are provided, and the interface is + * fully documented so that custom stores can be used as well. See + * the documentation for the Auth_OpenID_Consumer class for more + * information on the interface for stores. The implementations that + * are provided allow the consumer site to store the necessary data in + * several different ways, including several SQL databases and normal + * files on disk. + * + * There is an additional concrete store provided that puts the system + * in dumb mode. This is not recommended, as it removes the library's + * ability to stop replay attacks reliably. It still uses time-based + * checking to make replay attacks only possible within a small + * window, but they remain possible within that window. This store + * should only be used if the consumer site has no way to retain data + * between requests at all. + * + * IMMEDIATE MODE + * + * In the flow described above, the user may need to confirm to the + * lidentity server that it's ok to authorize his or her identity. + * The server may draw pages asking for information from the user + * before it redirects the browser back to the consumer's site. This + * is generally transparent to the consumer site, so it is typically + * ignored as an implementation detail. + * + * There can be times, however, where the consumer site wants to get a + * response immediately. When this is the case, the consumer can put + * the library in immediate mode. In immediate mode, there is an + * extra response possible from the server, which is essentially the + * server reporting that it doesn't have enough information to answer + * the question yet. + * + * USING THIS LIBRARY + * + * Integrating this library into an application is usually a + * relatively straightforward process. The process should basically + * follow this plan: + * + * Add an OpenID login field somewhere on your site. When an OpenID + * is entered in that field and the form is submitted, it should make + * a request to the your site which includes that OpenID URL. + * + * First, the application should instantiate the Auth_OpenID_Consumer + * class using the store of choice (Auth_OpenID_FileStore or one of + * the SQL-based stores). If the application has a custom + * session-management implementation, an object implementing the + * {@link Auth_Yadis_PHPSession} interface should be passed as the + * second parameter. Otherwise, the default uses $_SESSION. + * + * Next, the application should call the Auth_OpenID_Consumer object's + * 'begin' method. This method takes the OpenID URL. The 'begin' + * method returns an Auth_OpenID_AuthRequest object. + * + * Next, the application should call the 'redirectURL' method of the + * Auth_OpenID_AuthRequest object. The 'return_to' URL parameter is + * the URL that the OpenID server will send the user back to after + * attempting to verify his or her identity. The 'trust_root' is the + * URL (or URL pattern) that identifies your web site to the user when + * he or she is authorizing it. Send a redirect to the resulting URL + * to the user's browser. + * + * That's the first half of the authentication process. The second + * half of the process is done after the user's ID server sends the + * user's browser a redirect back to your site to complete their + * login. + * + * When that happens, the user will contact your site at the URL given + * as the 'return_to' URL to the Auth_OpenID_AuthRequest::redirectURL + * call made above. The request will have several query parameters + * added to the URL by the identity server as the information + * necessary to finish the request. + * + * Lastly, instantiate an Auth_OpenID_Consumer instance as above and + * call its 'complete' method, passing in all the received query + * arguments. + * + * There are multiple possible return types possible from that + * method. These indicate the whether or not the login was successful, + * and include any additional information appropriate for their type. + * + * PHP versions 4 and 5 + * + * LICENSE: See the COPYING file included in this distribution. + * + * @package OpenID + * @author JanRain, Inc. <openid@janrain.com> + * @copyright 2005-2008 Janrain, Inc. + * @license http://www.apache.org/licenses/LICENSE-2.0 Apache + */ + +/** + * Require utility classes and functions for the consumer. + */ +require_once "Auth/OpenID.php"; +require_once "Auth/OpenID/Message.php"; +require_once "Auth/OpenID/HMAC.php"; +require_once "Auth/OpenID/Association.php"; +require_once "Auth/OpenID/CryptUtil.php"; +require_once "Auth/OpenID/DiffieHellman.php"; +require_once "Auth/OpenID/KVForm.php"; +require_once "Auth/OpenID/Nonce.php"; +require_once "Auth/OpenID/Discover.php"; +require_once "Auth/OpenID/URINorm.php"; +require_once "Auth/Yadis/Manager.php"; +require_once "Auth/Yadis/XRI.php"; + +/** + * This is the status code returned when the complete method returns + * successfully. + */ +define('Auth_OpenID_SUCCESS', 'success'); + +/** + * Status to indicate cancellation of OpenID authentication. + */ +define('Auth_OpenID_CANCEL', 'cancel'); + +/** + * This is the status code completeAuth returns when the value it + * received indicated an invalid login. + */ +define('Auth_OpenID_FAILURE', 'failure'); + +/** + * This is the status code completeAuth returns when the + * {@link Auth_OpenID_Consumer} instance is in immediate mode, and the + * identity server sends back a URL to send the user to to complete his + * or her login. + */ +define('Auth_OpenID_SETUP_NEEDED', 'setup needed'); + +/** + * This is the status code beginAuth returns when the page fetched + * from the entered OpenID URL doesn't contain the necessary link tags + * to function as an identity page. + */ +define('Auth_OpenID_PARSE_ERROR', 'parse error'); + +/** + * An OpenID consumer implementation that performs discovery and does + * session management. See the Consumer.php file documentation for + * more information. + * + * @package OpenID + */ +class Auth_OpenID_Consumer { + + /** + * @access private + */ + var $discoverMethod = 'Auth_OpenID_discover'; + + /** + * @access private + */ + var $session_key_prefix = "_openid_consumer_"; + + /** + * @access private + */ + var $_token_suffix = "last_token"; + + /** + * Initialize a Consumer instance. + * + * You should create a new instance of the Consumer object with + * every HTTP request that handles OpenID transactions. + * + * @param Auth_OpenID_OpenIDStore $store This must be an object + * that implements the interface in {@link + * Auth_OpenID_OpenIDStore}. Several concrete implementations are + * provided, to cover most common use cases. For stores backed by + * MySQL, PostgreSQL, or SQLite, see the {@link + * Auth_OpenID_SQLStore} class and its sublcasses. For a + * filesystem-backed store, see the {@link Auth_OpenID_FileStore} + * module. As a last resort, if it isn't possible for the server + * to store state at all, an instance of {@link + * Auth_OpenID_DumbStore} can be used. + * + * @param mixed $session An object which implements the interface + * of the {@link Auth_Yadis_PHPSession} class. Particularly, this + * object is expected to have these methods: get($key), set($key), + * $value), and del($key). This defaults to a session object + * which wraps PHP's native session machinery. You should only + * need to pass something here if you have your own sessioning + * implementation. + * + * @param str $consumer_cls The name of the class to instantiate + * when creating the internal consumer object. This is used for + * testing. + */ + function Auth_OpenID_Consumer($store, $session = null, + $consumer_cls = null) + { + if ($session === null) { + $session = new Auth_Yadis_PHPSession(); + } + + $this->session = $session; + + if ($consumer_cls !== null) { + $this->consumer = new $consumer_cls($store); + } else { + $this->consumer = new Auth_OpenID_GenericConsumer($store); + } + + $this->_token_key = $this->session_key_prefix . $this->_token_suffix; + } + + /** + * Used in testing to define the discovery mechanism. + * + * @access private + */ + function getDiscoveryObject($session, $openid_url, + $session_key_prefix) + { + return new Auth_Yadis_Discovery($session, $openid_url, + $session_key_prefix); + } + + /** + * Start the OpenID authentication process. See steps 1-2 in the + * overview at the top of this file. + * + * @param string $user_url Identity URL given by the user. This + * method performs a textual transformation of the URL to try and + * make sure it is normalized. For example, a user_url of + * example.com will be normalized to http://example.com/ + * normalizing and resolving any redirects the server might issue. + * + * @param bool $anonymous True if the OpenID request is to be sent + * to the server without any identifier information. Use this + * when you want to transport data but don't want to do OpenID + * authentication with identifiers. + * + * @return Auth_OpenID_AuthRequest $auth_request An object + * containing the discovered information will be returned, with a + * method for building a redirect URL to the server, as described + * in step 3 of the overview. This object may also be used to add + * extension arguments to the request, using its 'addExtensionArg' + * method. + */ + function begin($user_url, $anonymous=false) + { + $openid_url = $user_url; + + $disco = $this->getDiscoveryObject($this->session, + $openid_url, + $this->session_key_prefix); + + // Set the 'stale' attribute of the manager. If discovery + // fails in a fatal way, the stale flag will cause the manager + // to be cleaned up next time discovery is attempted. + + $m = $disco->getManager(); + $loader = new Auth_Yadis_ManagerLoader(); + + if ($m) { + if ($m->stale) { + $disco->destroyManager(); + } else { + $m->stale = true; + $disco->session->set($disco->session_key, + serialize($loader->toSession($m))); + } + } + + $endpoint = $disco->getNextService($this->discoverMethod, + $this->consumer->fetcher); + + // Reset the 'stale' attribute of the manager. + $m = $disco->getManager(); + if ($m) { + $m->stale = false; + $disco->session->set($disco->session_key, + serialize($loader->toSession($m))); + } + + if ($endpoint === null) { + return null; + } else { + return $this->beginWithoutDiscovery($endpoint, + $anonymous); + } + } + + /** + * Start OpenID verification without doing OpenID server + * discovery. This method is used internally by Consumer.begin + * after discovery is performed, and exists to provide an + * interface for library users needing to perform their own + * discovery. + * + * @param Auth_OpenID_ServiceEndpoint $endpoint an OpenID service + * endpoint descriptor. + * + * @param bool anonymous Set to true if you want to perform OpenID + * without identifiers. + * + * @return Auth_OpenID_AuthRequest $auth_request An OpenID + * authentication request object. + */ + function beginWithoutDiscovery($endpoint, $anonymous=false) + { + $loader = new Auth_OpenID_ServiceEndpointLoader(); + $auth_req = $this->consumer->begin($endpoint); + $this->session->set($this->_token_key, + $loader->toSession($auth_req->endpoint)); + if (!$auth_req->setAnonymous($anonymous)) { + return new Auth_OpenID_FailureResponse(null, + "OpenID 1 requests MUST include the identifier " . + "in the request."); + } + return $auth_req; + } + + /** + * Called to interpret the server's response to an OpenID + * request. It is called in step 4 of the flow described in the + * consumer overview. + * + * @param string $current_url The URL used to invoke the application. + * Extract the URL from your application's web + * request framework and specify it here to have it checked + * against the openid.current_url value in the response. If + * the current_url URL check fails, the status of the + * completion will be FAILURE. + * + * @param array $query An array of the query parameters (key => + * value pairs) for this HTTP request. Defaults to null. If + * null, the GET or POST data are automatically gotten from the + * PHP environment. It is only useful to override $query for + * testing. + * + * @return Auth_OpenID_ConsumerResponse $response A instance of an + * Auth_OpenID_ConsumerResponse subclass. The type of response is + * indicated by the status attribute, which will be one of + * SUCCESS, CANCEL, FAILURE, or SETUP_NEEDED. + */ + function complete($current_url, $query=null) + { + if ($current_url && !is_string($current_url)) { + // This is ugly, but we need to complain loudly when + // someone uses the API incorrectly. + trigger_error("current_url must be a string; see NEWS file " . + "for upgrading notes.", + E_USER_ERROR); + } + + if ($query === null) { + $query = Auth_OpenID::getQuery(); + } + + $loader = new Auth_OpenID_ServiceEndpointLoader(); + $endpoint_data = $this->session->get($this->_token_key); + $endpoint = + $loader->fromSession($endpoint_data); + + $message = Auth_OpenID_Message::fromPostArgs($query); + $response = $this->consumer->complete($message, $endpoint, + $current_url); + $this->session->del($this->_token_key); + + if (in_array($response->status, array(Auth_OpenID_SUCCESS, + Auth_OpenID_CANCEL))) { + if ($response->identity_url !== null) { + $disco = $this->getDiscoveryObject($this->session, + $response->identity_url, + $this->session_key_prefix); + $disco->cleanup(true); + } + } + + return $response; + } +} + +/** + * A class implementing HMAC/DH-SHA1 consumer sessions. + * + * @package OpenID + */ +class Auth_OpenID_DiffieHellmanSHA1ConsumerSession { + var $session_type = 'DH-SHA1'; + var $hash_func = 'Auth_OpenID_SHA1'; + var $secret_size = 20; + var $allowed_assoc_types = array('HMAC-SHA1'); + + function Auth_OpenID_DiffieHellmanSHA1ConsumerSession($dh = null) + { + if ($dh === null) { + $dh = new Auth_OpenID_DiffieHellman(); + } + + $this->dh = $dh; + } + + function getRequest() + { + $math = Auth_OpenID_getMathLib(); + + $cpub = $math->longToBase64($this->dh->public); + + $args = array('dh_consumer_public' => $cpub); + + if (!$this->dh->usingDefaultValues()) { + $args = array_merge($args, array( + 'dh_modulus' => + $math->longToBase64($this->dh->mod), + 'dh_gen' => + $math->longToBase64($this->dh->gen))); + } + + return $args; + } + + function extractSecret($response) + { + if (!$response->hasKey(Auth_OpenID_OPENID_NS, + 'dh_server_public')) { + return null; + } + + if (!$response->hasKey(Auth_OpenID_OPENID_NS, + 'enc_mac_key')) { + return null; + } + + $math = Auth_OpenID_getMathLib(); + + $spub = $math->base64ToLong($response->getArg(Auth_OpenID_OPENID_NS, + 'dh_server_public')); + $enc_mac_key = base64_decode($response->getArg(Auth_OpenID_OPENID_NS, + 'enc_mac_key')); + + return $this->dh->xorSecret($spub, $enc_mac_key, $this->hash_func); + } +} + +/** + * A class implementing HMAC/DH-SHA256 consumer sessions. + * + * @package OpenID + */ +class Auth_OpenID_DiffieHellmanSHA256ConsumerSession extends + Auth_OpenID_DiffieHellmanSHA1ConsumerSession { + var $session_type = 'DH-SHA256'; + var $hash_func = 'Auth_OpenID_SHA256'; + var $secret_size = 32; + var $allowed_assoc_types = array('HMAC-SHA256'); +} + +/** + * A class implementing plaintext consumer sessions. + * + * @package OpenID + */ +class Auth_OpenID_PlainTextConsumerSession { + var $session_type = 'no-encryption'; + var $allowed_assoc_types = array('HMAC-SHA1', 'HMAC-SHA256'); + + function getRequest() + { + return array(); + } + + function extractSecret($response) + { + if (!$response->hasKey(Auth_OpenID_OPENID_NS, 'mac_key')) { + return null; + } + + return base64_decode($response->getArg(Auth_OpenID_OPENID_NS, + 'mac_key')); + } +} + +/** + * Returns available session types. + */ +function Auth_OpenID_getAvailableSessionTypes() +{ + $types = array( + 'no-encryption' => 'Auth_OpenID_PlainTextConsumerSession', + 'DH-SHA1' => 'Auth_OpenID_DiffieHellmanSHA1ConsumerSession', + 'DH-SHA256' => 'Auth_OpenID_DiffieHellmanSHA256ConsumerSession'); + + return $types; +} + +/** + * This class is the interface to the OpenID consumer logic. + * Instances of it maintain no per-request state, so they can be + * reused (or even used by multiple threads concurrently) as needed. + * + * @package OpenID + */ +class Auth_OpenID_GenericConsumer { + /** + * @access private + */ + var $discoverMethod = 'Auth_OpenID_discover'; + + /** + * This consumer's store object. + */ + var $store; + + /** + * @access private + */ + var $_use_assocs; + + /** + * @access private + */ + var $openid1_nonce_query_arg_name = 'janrain_nonce'; + + /** + * Another query parameter that gets added to the return_to for + * OpenID 1; if the user's session state is lost, use this claimed + * identifier to do discovery when verifying the response. + */ + var $openid1_return_to_identifier_name = 'openid1_claimed_id'; + + /** + * This method initializes a new {@link Auth_OpenID_Consumer} + * instance to access the library. + * + * @param Auth_OpenID_OpenIDStore $store This must be an object + * that implements the interface in {@link Auth_OpenID_OpenIDStore}. + * Several concrete implementations are provided, to cover most common use + * cases. For stores backed by MySQL, PostgreSQL, or SQLite, see + * the {@link Auth_OpenID_SQLStore} class and its sublcasses. For a + * filesystem-backed store, see the {@link Auth_OpenID_FileStore} module. + * As a last resort, if it isn't possible for the server to store + * state at all, an instance of {@link Auth_OpenID_DumbStore} can be used. + * + * @param bool $immediate This is an optional boolean value. It + * controls whether the library uses immediate mode, as explained + * in the module description. The default value is False, which + * disables immediate mode. + */ + function Auth_OpenID_GenericConsumer($store) + { + $this->store = $store; + $this->negotiator = Auth_OpenID_getDefaultNegotiator(); + $this->_use_assocs = (is_null($this->store) ? false : true); + + $this->fetcher = Auth_Yadis_Yadis::getHTTPFetcher(); + + $this->session_types = Auth_OpenID_getAvailableSessionTypes(); + } + + /** + * Called to begin OpenID authentication using the specified + * {@link Auth_OpenID_ServiceEndpoint}. + * + * @access private + */ + function begin($service_endpoint) + { + $assoc = $this->_getAssociation($service_endpoint); + $r = new Auth_OpenID_AuthRequest($service_endpoint, $assoc); + $r->return_to_args[$this->openid1_nonce_query_arg_name] = + Auth_OpenID_mkNonce(); + + if ($r->message->isOpenID1()) { + $r->return_to_args[$this->openid1_return_to_identifier_name] = + $r->endpoint->claimed_id; + } + + return $r; + } + + /** + * Given an {@link Auth_OpenID_Message}, {@link + * Auth_OpenID_ServiceEndpoint} and optional return_to URL, + * complete OpenID authentication. + * + * @access private + */ + function complete($message, $endpoint, $return_to) + { + $mode = $message->getArg(Auth_OpenID_OPENID_NS, 'mode', + '<no mode set>'); + + $mode_methods = array( + 'cancel' => '_complete_cancel', + 'error' => '_complete_error', + 'setup_needed' => '_complete_setup_needed', + 'id_res' => '_complete_id_res', + ); + + $method = Auth_OpenID::arrayGet($mode_methods, $mode, + '_completeInvalid'); + + return call_user_func_array(array($this, $method), + array($message, &$endpoint, $return_to)); + } + + /** + * @access private + */ + function _completeInvalid($message, $endpoint, $unused) + { + $mode = $message->getArg(Auth_OpenID_OPENID_NS, 'mode', + '<No mode set>'); + + return new Auth_OpenID_FailureResponse($endpoint, + sprintf("Invalid openid.mode '%s'", $mode)); + } + + /** + * @access private + */ + function _complete_cancel($message, $endpoint, $unused) + { + return new Auth_OpenID_CancelResponse($endpoint); + } + + /** + * @access private + */ + function _complete_error($message, $endpoint, $unused) + { + $error = $message->getArg(Auth_OpenID_OPENID_NS, 'error'); + $contact = $message->getArg(Auth_OpenID_OPENID_NS, 'contact'); + $reference = $message->getArg(Auth_OpenID_OPENID_NS, 'reference'); + + return new Auth_OpenID_FailureResponse($endpoint, $error, + $contact, $reference); + } + + /** + * @access private + */ + function _complete_setup_needed($message, $endpoint, $unused) + { + if (!$message->isOpenID2()) { + return $this->_completeInvalid($message, $endpoint); + } + + $user_setup_url = $message->getArg(Auth_OpenID_OPENID2_NS, + 'user_setup_url'); + return new Auth_OpenID_SetupNeededResponse($endpoint, $user_setup_url); + } + + /** + * @access private + */ + function _complete_id_res($message, $endpoint, $return_to) + { + $user_setup_url = $message->getArg(Auth_OpenID_OPENID1_NS, + 'user_setup_url'); + + if ($this->_checkSetupNeeded($message)) { + return new Auth_OpenID_SetupNeededResponse( + $endpoint, $user_setup_url); + } else { + return $this->_doIdRes($message, $endpoint, $return_to); + } + } + + /** + * @access private + */ + function _checkSetupNeeded($message) + { + // In OpenID 1, we check to see if this is a cancel from + // immediate mode by the presence of the user_setup_url + // parameter. + if ($message->isOpenID1()) { + $user_setup_url = $message->getArg(Auth_OpenID_OPENID1_NS, + 'user_setup_url'); + if ($user_setup_url !== null) { + return true; + } + } + + return false; + } + + /** + * @access private + */ + function _doIdRes($message, $endpoint, $return_to) + { + // Checks for presence of appropriate fields (and checks + // signed list fields) + $result = $this->_idResCheckForFields($message); + + if (Auth_OpenID::isFailure($result)) { + return $result; + } + + if (!$this->_checkReturnTo($message, $return_to)) { + return new Auth_OpenID_FailureResponse(null, + sprintf("return_to does not match return URL. Expected %s, got %s", + $return_to, + $message->getArg(Auth_OpenID_OPENID_NS, 'return_to'))); + } + + // Verify discovery information: + $result = $this->_verifyDiscoveryResults($message, $endpoint); + + if (Auth_OpenID::isFailure($result)) { + return $result; + } + + $endpoint = $result; + + $result = $this->_idResCheckSignature($message, + $endpoint->server_url); + + if (Auth_OpenID::isFailure($result)) { + return $result; + } + + $result = $this->_idResCheckNonce($message, $endpoint); + + if (Auth_OpenID::isFailure($result)) { + return $result; + } + + $signed_list_str = $message->getArg(Auth_OpenID_OPENID_NS, 'signed', + Auth_OpenID_NO_DEFAULT); + if (Auth_OpenID::isFailure($signed_list_str)) { + return $signed_list_str; + } + $signed_list = explode(',', $signed_list_str); + + $signed_fields = Auth_OpenID::addPrefix($signed_list, "openid."); + + return new Auth_OpenID_SuccessResponse($endpoint, $message, + $signed_fields); + + } + + /** + * @access private + */ + function _checkReturnTo($message, $return_to) + { + // Check an OpenID message and its openid.return_to value + // against a return_to URL from an application. Return True + // on success, False on failure. + + // Check the openid.return_to args against args in the + // original message. + $result = Auth_OpenID_GenericConsumer::_verifyReturnToArgs( + $message->toPostArgs()); + if (Auth_OpenID::isFailure($result)) { + return false; + } + + // Check the return_to base URL against the one in the + // message. + $msg_return_to = $message->getArg(Auth_OpenID_OPENID_NS, + 'return_to'); + if (Auth_OpenID::isFailure($return_to)) { + // XXX log me + return false; + } + + $return_to_parts = parse_url(Auth_OpenID_urinorm($return_to)); + $msg_return_to_parts = parse_url(Auth_OpenID_urinorm($msg_return_to)); + + // If port is absent from both, add it so it's equal in the + // check below. + if ((!array_key_exists('port', $return_to_parts)) && + (!array_key_exists('port', $msg_return_to_parts))) { + $return_to_parts['port'] = null; + $msg_return_to_parts['port'] = null; + } + + // If path is absent from both, add it so it's equal in the + // check below. + if ((!array_key_exists('path', $return_to_parts)) && + (!array_key_exists('path', $msg_return_to_parts))) { + $return_to_parts['path'] = null; + $msg_return_to_parts['path'] = null; + } + + // The URL scheme, authority, and path MUST be the same + // between the two URLs. + foreach (array('scheme', 'host', 'port', 'path') as $component) { + // If the url component is absent in either URL, fail. + // There should always be a scheme, host, port, and path. + if (!array_key_exists($component, $return_to_parts)) { + return false; + } + + if (!array_key_exists($component, $msg_return_to_parts)) { + return false; + } + + if (Auth_OpenID::arrayGet($return_to_parts, $component) !== + Auth_OpenID::arrayGet($msg_return_to_parts, $component)) { + return false; + } + } + + return true; + } + + /** + * @access private + */ + function _verifyReturnToArgs($query) + { + // Verify that the arguments in the return_to URL are present in this + // response. + + $message = Auth_OpenID_Message::fromPostArgs($query); + $return_to = $message->getArg(Auth_OpenID_OPENID_NS, 'return_to'); + + if (Auth_OpenID::isFailure($return_to)) { + return $return_to; + } + // XXX: this should be checked by _idResCheckForFields + if (!$return_to) { + return new Auth_OpenID_FailureResponse(null, + "Response has no return_to"); + } + + $parsed_url = parse_url($return_to); + + $q = array(); + if (array_key_exists('query', $parsed_url)) { + $rt_query = $parsed_url['query']; + $q = Auth_OpenID::parse_str($rt_query); + } + + foreach ($q as $rt_key => $rt_value) { + if (!array_key_exists($rt_key, $query)) { + return new Auth_OpenID_FailureResponse(null, + sprintf("return_to parameter %s absent from query", $rt_key)); + } else { + $value = $query[$rt_key]; + if ($rt_value != $value) { + return new Auth_OpenID_FailureResponse(null, + sprintf("parameter %s value %s does not match " . + "return_to value %s", $rt_key, + $value, $rt_value)); + } + } + } + + // Make sure all non-OpenID arguments in the response are also + // in the signed return_to. + $bare_args = $message->getArgs(Auth_OpenID_BARE_NS); + foreach ($bare_args as $key => $value) { + if (Auth_OpenID::arrayGet($q, $key) != $value) { + return new Auth_OpenID_FailureResponse(null, + sprintf("Parameter %s = %s not in return_to URL", + $key, $value)); + } + } + + return true; + } + + /** + * @access private + */ + function _idResCheckSignature($message, $server_url) + { + $assoc_handle = $message->getArg(Auth_OpenID_OPENID_NS, + 'assoc_handle'); + if (Auth_OpenID::isFailure($assoc_handle)) { + return $assoc_handle; + } + + $assoc = $this->store->getAssociation($server_url, $assoc_handle); + + if ($assoc) { + if ($assoc->getExpiresIn() <= 0) { + // XXX: It might be a good idea sometimes to re-start + // the authentication with a new association. Doing it + // automatically opens the possibility for + // denial-of-service by a server that just returns + // expired associations (or really short-lived + // associations) + return new Auth_OpenID_FailureResponse(null, + 'Association with ' . $server_url . ' expired'); + } + + if (!$assoc->checkMessageSignature($message)) { + // If we get a "bad signature" here, it means that the association + // is unrecoverabley corrupted in some way. Any futher attempts + // to login with this association is likely to fail. Drop it. + $this->store->removeAssociation($server_url, $assoc_handle); + return new Auth_OpenID_FailureResponse(null, + "Bad signature"); + } + } else { + // It's not an association we know about. Stateless mode + // is our only possible path for recovery. XXX - async + // framework will not want to block on this call to + // _checkAuth. + if (!$this->_checkAuth($message, $server_url)) { + return new Auth_OpenID_FailureResponse(null, + "Server denied check_authentication"); + } + } + + return null; + } + + /** + * @access private + */ + function _verifyDiscoveryResults($message, $endpoint=null) + { + if ($message->getOpenIDNamespace() == Auth_OpenID_OPENID2_NS) { + return $this->_verifyDiscoveryResultsOpenID2($message, + $endpoint); + } else { + return $this->_verifyDiscoveryResultsOpenID1($message, + $endpoint); + } + } + + /** + * @access private + */ + function _verifyDiscoveryResultsOpenID1($message, $endpoint) + { + $claimed_id = $message->getArg(Auth_OpenID_BARE_NS, + $this->openid1_return_to_identifier_name); + + if (($endpoint === null) && ($claimed_id === null)) { + return new Auth_OpenID_FailureResponse($endpoint, + 'When using OpenID 1, the claimed ID must be supplied, ' . + 'either by passing it through as a return_to parameter ' . + 'or by using a session, and supplied to the GenericConsumer ' . + 'as the argument to complete()'); + } else if (($endpoint !== null) && ($claimed_id === null)) { + $claimed_id = $endpoint->claimed_id; + } + + $to_match = new Auth_OpenID_ServiceEndpoint(); + $to_match->type_uris = array(Auth_OpenID_TYPE_1_1); + $to_match->local_id = $message->getArg(Auth_OpenID_OPENID1_NS, + 'identity'); + + // Restore delegate information from the initiation phase + $to_match->claimed_id = $claimed_id; + + if ($to_match->local_id === null) { + return new Auth_OpenID_FailureResponse($endpoint, + "Missing required field openid.identity"); + } + + $to_match_1_0 = $to_match->copy(); + $to_match_1_0->type_uris = array(Auth_OpenID_TYPE_1_0); + + if ($endpoint !== null) { + $result = $this->_verifyDiscoverySingle($endpoint, $to_match); + + if (is_a($result, 'Auth_OpenID_TypeURIMismatch')) { + $result = $this->_verifyDiscoverySingle($endpoint, + $to_match_1_0); + } + + if (Auth_OpenID::isFailure($result)) { + // oidutil.log("Error attempting to use stored + // discovery information: " + str(e)) + // oidutil.log("Attempting discovery to + // verify endpoint") + } else { + return $endpoint; + } + } + + // Endpoint is either bad (failed verification) or None + return $this->_discoverAndVerify($to_match->claimed_id, + array($to_match, $to_match_1_0)); + } + + /** + * @access private + */ + function _verifyDiscoverySingle($endpoint, $to_match) + { + // Every type URI that's in the to_match endpoint has to be + // present in the discovered endpoint. + foreach ($to_match->type_uris as $type_uri) { + if (!$endpoint->usesExtension($type_uri)) { + return new Auth_OpenID_TypeURIMismatch($endpoint, + "Required type ".$type_uri." not present"); + } + } + + // Fragments do not influence discovery, so we can't compare a + // claimed identifier with a fragment to discovered + // information. + list($defragged_claimed_id, $_) = + Auth_OpenID::urldefrag($to_match->claimed_id); + + if ($defragged_claimed_id != $endpoint->claimed_id) { + return new Auth_OpenID_FailureResponse($endpoint, + sprintf('Claimed ID does not match (different subjects!), ' . + 'Expected %s, got %s', $defragged_claimed_id, + $endpoint->claimed_id)); + } + + if ($to_match->getLocalID() != $endpoint->getLocalID()) { + return new Auth_OpenID_FailureResponse($endpoint, + sprintf('local_id mismatch. Expected %s, got %s', + $to_match->getLocalID(), $endpoint->getLocalID())); + } + + // If the server URL is None, this must be an OpenID 1 + // response, because op_endpoint is a required parameter in + // OpenID 2. In that case, we don't actually care what the + // discovered server_url is, because signature checking or + // check_auth should take care of that check for us. + if ($to_match->server_url === null) { + if ($to_match->preferredNamespace() != Auth_OpenID_OPENID1_NS) { + return new Auth_OpenID_FailureResponse($endpoint, + "Preferred namespace mismatch (bug)"); + } + } else if ($to_match->server_url != $endpoint->server_url) { + return new Auth_OpenID_FailureResponse($endpoint, + sprintf('OP Endpoint mismatch. Expected %s, got %s', + $to_match->server_url, $endpoint->server_url)); + } + + return null; + } + + /** + * @access private + */ + function _verifyDiscoveryResultsOpenID2($message, $endpoint) + { + $to_match = new Auth_OpenID_ServiceEndpoint(); + $to_match->type_uris = array(Auth_OpenID_TYPE_2_0); + $to_match->claimed_id = $message->getArg(Auth_OpenID_OPENID2_NS, + 'claimed_id'); + + $to_match->local_id = $message->getArg(Auth_OpenID_OPENID2_NS, + 'identity'); + + $to_match->server_url = $message->getArg(Auth_OpenID_OPENID2_NS, + 'op_endpoint'); + + if ($to_match->server_url === null) { + return new Auth_OpenID_FailureResponse($endpoint, + "OP Endpoint URL missing"); + } + + // claimed_id and identifier must both be present or both be + // absent + if (($to_match->claimed_id === null) && + ($to_match->local_id !== null)) { + return new Auth_OpenID_FailureResponse($endpoint, + 'openid.identity is present without openid.claimed_id'); + } + + if (($to_match->claimed_id !== null) && + ($to_match->local_id === null)) { + return new Auth_OpenID_FailureResponse($endpoint, + 'openid.claimed_id is present without openid.identity'); + } + + if ($to_match->claimed_id === null) { + // This is a response without identifiers, so there's + // really no checking that we can do, so return an + // endpoint that's for the specified `openid.op_endpoint' + return Auth_OpenID_ServiceEndpoint::fromOPEndpointURL( + $to_match->server_url); + } + + if (!$endpoint) { + // The claimed ID doesn't match, so we have to do + // discovery again. This covers not using sessions, OP + // identifier endpoints and responses that didn't match + // the original request. + // oidutil.log('No pre-discovered information supplied.') + return $this->_discoverAndVerify($to_match->claimed_id, + array($to_match)); + } else { + + // The claimed ID matches, so we use the endpoint that we + // discovered in initiation. This should be the most + // common case. + $result = $this->_verifyDiscoverySingle($endpoint, $to_match); + + if (Auth_OpenID::isFailure($result)) { + $endpoint = $this->_discoverAndVerify($to_match->claimed_id, + array($to_match)); + if (Auth_OpenID::isFailure($endpoint)) { + return $endpoint; + } + } + } + + // The endpoint we return should have the claimed ID from the + // message we just verified, fragment and all. + if ($endpoint->claimed_id != $to_match->claimed_id) { + $endpoint->claimed_id = $to_match->claimed_id; + } + + return $endpoint; + } + + /** + * @access private + */ + function _discoverAndVerify($claimed_id, $to_match_endpoints) + { + // oidutil.log('Performing discovery on %s' % (claimed_id,)) + list($unused, $services) = call_user_func($this->discoverMethod, + $claimed_id, + &$this->fetcher); + + if (!$services) { + return new Auth_OpenID_FailureResponse(null, + sprintf("No OpenID information found at %s", + $claimed_id)); + } + + return $this->_verifyDiscoveryServices($claimed_id, $services, + $to_match_endpoints); + } + + /** + * @access private + */ + function _verifyDiscoveryServices($claimed_id, + $services, $to_match_endpoints) + { + // Search the services resulting from discovery to find one + // that matches the information from the assertion + + foreach ($services as $endpoint) { + foreach ($to_match_endpoints as $to_match_endpoint) { + $result = $this->_verifyDiscoverySingle($endpoint, + $to_match_endpoint); + + if (!Auth_OpenID::isFailure($result)) { + // It matches, so discover verification has + // succeeded. Return this endpoint. + return $endpoint; + } + } + } + + return new Auth_OpenID_FailureResponse(null, + sprintf('No matching endpoint found after discovering %s: %s', + $claimed_id, $result->message)); + } + + /** + * Extract the nonce from an OpenID 1 response. Return the nonce + * from the BARE_NS since we independently check the return_to + * arguments are the same as those in the response message. + * + * See the openid1_nonce_query_arg_name class variable + * + * @returns $nonce The nonce as a string or null + * + * @access private + */ + function _idResGetNonceOpenID1($message, $endpoint) + { + return $message->getArg(Auth_OpenID_BARE_NS, + $this->openid1_nonce_query_arg_name); + } + + /** + * @access private + */ + function _idResCheckNonce($message, $endpoint) + { + if ($message->isOpenID1()) { + // This indicates that the nonce was generated by the consumer + $nonce = $this->_idResGetNonceOpenID1($message, $endpoint); + $server_url = ''; + } else { + $nonce = $message->getArg(Auth_OpenID_OPENID2_NS, + 'response_nonce'); + + $server_url = $endpoint->server_url; + } + + if ($nonce === null) { + return new Auth_OpenID_FailureResponse($endpoint, + "Nonce missing from response"); + } + + $parts = Auth_OpenID_splitNonce($nonce); + + if ($parts === null) { + return new Auth_OpenID_FailureResponse($endpoint, + "Malformed nonce in response"); + } + + list($timestamp, $salt) = $parts; + + if (!$this->store->useNonce($server_url, $timestamp, $salt)) { + return new Auth_OpenID_FailureResponse($endpoint, + "Nonce already used or out of range"); + } + + return null; + } + + /** + * @access private + */ + function _idResCheckForFields($message) + { + $basic_fields = array('return_to', 'assoc_handle', 'sig', 'signed'); + $basic_sig_fields = array('return_to', 'identity'); + + $require_fields = array( + Auth_OpenID_OPENID2_NS => array_merge($basic_fields, + array('op_endpoint')), + + Auth_OpenID_OPENID1_NS => array_merge($basic_fields, + array('identity')) + ); + + $require_sigs = array( + Auth_OpenID_OPENID2_NS => array_merge($basic_sig_fields, + array('response_nonce', + 'claimed_id', + 'assoc_handle', + 'op_endpoint')), + Auth_OpenID_OPENID1_NS => array_merge($basic_sig_fields, + array('nonce')) + ); + + foreach ($require_fields[$message->getOpenIDNamespace()] as $field) { + if (!$message->hasKey(Auth_OpenID_OPENID_NS, $field)) { + return new Auth_OpenID_FailureResponse(null, + "Missing required field '".$field."'"); + } + } + + $signed_list_str = $message->getArg(Auth_OpenID_OPENID_NS, + 'signed', + Auth_OpenID_NO_DEFAULT); + if (Auth_OpenID::isFailure($signed_list_str)) { + return $signed_list_str; + } + $signed_list = explode(',', $signed_list_str); + + foreach ($require_sigs[$message->getOpenIDNamespace()] as $field) { + // Field is present and not in signed list + if ($message->hasKey(Auth_OpenID_OPENID_NS, $field) && + (!in_array($field, $signed_list))) { + return new Auth_OpenID_FailureResponse(null, + "'".$field."' not signed"); + } + } + + return null; + } + + /** + * @access private + */ + function _checkAuth($message, $server_url) + { + $request = $this->_createCheckAuthRequest($message); + if ($request === null) { + return false; + } + + $resp_message = $this->_makeKVPost($request, $server_url); + if (($resp_message === null) || + (is_a($resp_message, 'Auth_OpenID_ServerErrorContainer'))) { + return false; + } + + return $this->_processCheckAuthResponse($resp_message, $server_url); + } + + /** + * @access private + */ + function _createCheckAuthRequest($message) + { + $signed = $message->getArg(Auth_OpenID_OPENID_NS, 'signed'); + if ($signed) { + foreach (explode(',', $signed) as $k) { + $value = $message->getAliasedArg($k); + if ($value === null) { + return null; + } + } + } + $ca_message = $message->copy(); + $ca_message->setArg(Auth_OpenID_OPENID_NS, 'mode', + 'check_authentication'); + return $ca_message; + } + + /** + * @access private + */ + function _processCheckAuthResponse($response, $server_url) + { + $is_valid = $response->getArg(Auth_OpenID_OPENID_NS, 'is_valid', + 'false'); + + $invalidate_handle = $response->getArg(Auth_OpenID_OPENID_NS, + 'invalidate_handle'); + + if ($invalidate_handle !== null) { + $this->store->removeAssociation($server_url, + $invalidate_handle); + } + + if ($is_valid == 'true') { + return true; + } + + return false; + } + + /** + * Adapt a POST response to a Message. + * + * @param $response Result of a POST to an OpenID endpoint. + * + * @access private + */ + static function _httpResponseToMessage($response, $server_url) + { + // Should this function be named Message.fromHTTPResponse instead? + $response_message = Auth_OpenID_Message::fromKVForm($response->body); + + if ($response->status == 400) { + return Auth_OpenID_ServerErrorContainer::fromMessage( + $response_message); + } else if ($response->status != 200 and $response->status != 206) { + return null; + } + + return $response_message; + } + + /** + * @access private + */ + function _makeKVPost($message, $server_url) + { + $body = $message->toURLEncoded(); + $resp = $this->fetcher->post($server_url, $body); + + if ($resp === null) { + return null; + } + + return $this->_httpResponseToMessage($resp, $server_url); + } + + /** + * @access private + */ + function _getAssociation($endpoint) + { + if (!$this->_use_assocs) { + return null; + } + + $assoc = $this->store->getAssociation($endpoint->server_url); + + if (($assoc === null) || + ($assoc->getExpiresIn() <= 0)) { + + $assoc = $this->_negotiateAssociation($endpoint); + + if ($assoc !== null) { + $this->store->storeAssociation($endpoint->server_url, + $assoc); + } + } + + return $assoc; + } + + /** + * Handle ServerErrors resulting from association requests. + * + * @return $result If server replied with an C{unsupported-type} + * error, return a tuple of supported C{association_type}, + * C{session_type}. Otherwise logs the error and returns null. + * + * @access private + */ + function _extractSupportedAssociationType($server_error, $endpoint, + $assoc_type) + { + // Any error message whose code is not 'unsupported-type' + // should be considered a total failure. + if (($server_error->error_code != 'unsupported-type') || + ($server_error->message->isOpenID1())) { + return null; + } + + // The server didn't like the association/session type that we + // sent, and it sent us back a message that might tell us how + // to handle it. + + // Extract the session_type and assoc_type from the error + // message + $assoc_type = $server_error->message->getArg(Auth_OpenID_OPENID_NS, + 'assoc_type'); + + $session_type = $server_error->message->getArg(Auth_OpenID_OPENID_NS, + 'session_type'); + + if (($assoc_type === null) || ($session_type === null)) { + return null; + } else if (!$this->negotiator->isAllowed($assoc_type, + $session_type)) { + return null; + } else { + return array($assoc_type, $session_type); + } + } + + /** + * @access private + */ + function _negotiateAssociation($endpoint) + { + // Get our preferred session/association type from the negotiatior. + list($assoc_type, $session_type) = $this->negotiator->getAllowedType(); + + $assoc = $this->_requestAssociation( + $endpoint, $assoc_type, $session_type); + + if (Auth_OpenID::isFailure($assoc)) { + return null; + } + + if (is_a($assoc, 'Auth_OpenID_ServerErrorContainer')) { + $why = $assoc; + + $supportedTypes = $this->_extractSupportedAssociationType( + $why, $endpoint, $assoc_type); + + if ($supportedTypes !== null) { + list($assoc_type, $session_type) = $supportedTypes; + + // Attempt to create an association from the assoc_type + // and session_type that the server told us it + // supported. + $assoc = $this->_requestAssociation( + $endpoint, $assoc_type, $session_type); + + if (is_a($assoc, 'Auth_OpenID_ServerErrorContainer')) { + // Do not keep trying, since it rejected the + // association type that it told us to use. + // oidutil.log('Server %s refused its suggested association + // 'type: session_type=%s, assoc_type=%s' + // % (endpoint.server_url, session_type, + // assoc_type)) + return null; + } else { + return $assoc; + } + } else { + return null; + } + } else { + return $assoc; + } + } + + /** + * @access private + */ + function _requestAssociation($endpoint, $assoc_type, $session_type) + { + list($assoc_session, $args) = $this->_createAssociateRequest( + $endpoint, $assoc_type, $session_type); + + $response_message = $this->_makeKVPost($args, $endpoint->server_url); + + if ($response_message === null) { + // oidutil.log('openid.associate request failed: %s' % (why[0],)) + return null; + } else if (is_a($response_message, + 'Auth_OpenID_ServerErrorContainer')) { + return $response_message; + } + + return $this->_extractAssociation($response_message, $assoc_session); + } + + /** + * @access private + */ + function _extractAssociation($assoc_response, $assoc_session) + { + // Extract the common fields from the response, raising an + // exception if they are not found + $assoc_type = $assoc_response->getArg( + Auth_OpenID_OPENID_NS, 'assoc_type', + Auth_OpenID_NO_DEFAULT); + + if (Auth_OpenID::isFailure($assoc_type)) { + return $assoc_type; + } + + $assoc_handle = $assoc_response->getArg( + Auth_OpenID_OPENID_NS, 'assoc_handle', + Auth_OpenID_NO_DEFAULT); + + if (Auth_OpenID::isFailure($assoc_handle)) { + return $assoc_handle; + } + + // expires_in is a base-10 string. The Python parsing will + // accept literals that have whitespace around them and will + // accept negative values. Neither of these are really in-spec, + // but we think it's OK to accept them. + $expires_in_str = $assoc_response->getArg( + Auth_OpenID_OPENID_NS, 'expires_in', + Auth_OpenID_NO_DEFAULT); + + if (Auth_OpenID::isFailure($expires_in_str)) { + return $expires_in_str; + } + + $expires_in = Auth_OpenID::intval($expires_in_str); + if ($expires_in === false) { + + $err = sprintf("Could not parse expires_in from association ". + "response %s", print_r($assoc_response, true)); + return new Auth_OpenID_FailureResponse(null, $err); + } + + // OpenID 1 has funny association session behaviour. + if ($assoc_response->isOpenID1()) { + $session_type = $this->_getOpenID1SessionType($assoc_response); + } else { + $session_type = $assoc_response->getArg( + Auth_OpenID_OPENID2_NS, 'session_type', + Auth_OpenID_NO_DEFAULT); + + if (Auth_OpenID::isFailure($session_type)) { + return $session_type; + } + } + + // Session type mismatch + if ($assoc_session->session_type != $session_type) { + if ($assoc_response->isOpenID1() && + ($session_type == 'no-encryption')) { + // In OpenID 1, any association request can result in + // a 'no-encryption' association response. Setting + // assoc_session to a new no-encryption session should + // make the rest of this function work properly for + // that case. + $assoc_session = new Auth_OpenID_PlainTextConsumerSession(); + } else { + // Any other mismatch, regardless of protocol version + // results in the failure of the association session + // altogether. + return null; + } + } + + // Make sure assoc_type is valid for session_type + if (!in_array($assoc_type, $assoc_session->allowed_assoc_types)) { + return null; + } + + // Delegate to the association session to extract the secret + // from the response, however is appropriate for that session + // type. + $secret = $assoc_session->extractSecret($assoc_response); + + if ($secret === null) { + return null; + } + + return Auth_OpenID_Association::fromExpiresIn( + $expires_in, $assoc_handle, $secret, $assoc_type); + } + + /** + * @access private + */ + function _createAssociateRequest($endpoint, $assoc_type, $session_type) + { + if (array_key_exists($session_type, $this->session_types)) { + $session_type_class = $this->session_types[$session_type]; + + if (is_callable($session_type_class)) { + $assoc_session = $session_type_class(); + } else { + $assoc_session = new $session_type_class(); + } + } else { + return null; + } + + $args = array( + 'mode' => 'associate', + 'assoc_type' => $assoc_type); + + if (!$endpoint->compatibilityMode()) { + $args['ns'] = Auth_OpenID_OPENID2_NS; + } + + // Leave out the session type if we're in compatibility mode + // *and* it's no-encryption. + if ((!$endpoint->compatibilityMode()) || + ($assoc_session->session_type != 'no-encryption')) { + $args['session_type'] = $assoc_session->session_type; + } + + $args = array_merge($args, $assoc_session->getRequest()); + $message = Auth_OpenID_Message::fromOpenIDArgs($args); + return array($assoc_session, $message); + } + + /** + * Given an association response message, extract the OpenID 1.X + * session type. + * + * This function mostly takes care of the 'no-encryption' default + * behavior in OpenID 1. + * + * If the association type is plain-text, this function will + * return 'no-encryption' + * + * @access private + * @return $typ The association type for this message + */ + function _getOpenID1SessionType($assoc_response) + { + // If it's an OpenID 1 message, allow session_type to default + // to None (which signifies "no-encryption") + $session_type = $assoc_response->getArg(Auth_OpenID_OPENID1_NS, + 'session_type'); + + // Handle the differences between no-encryption association + // respones in OpenID 1 and 2: + + // no-encryption is not really a valid session type for OpenID + // 1, but we'll accept it anyway, while issuing a warning. + if ($session_type == 'no-encryption') { + // oidutil.log('WARNING: OpenID server sent "no-encryption"' + // 'for OpenID 1.X') + } else if (($session_type == '') || ($session_type === null)) { + // Missing or empty session type is the way to flag a + // 'no-encryption' response. Change the session type to + // 'no-encryption' so that it can be handled in the same + // way as OpenID 2 'no-encryption' respones. + $session_type = 'no-encryption'; + } + + return $session_type; + } +} + +/** + * This class represents an authentication request from a consumer to + * an OpenID server. + * + * @package OpenID + */ +class Auth_OpenID_AuthRequest { + + /** + * Initialize an authentication request with the specified token, + * association, and endpoint. + * + * Users of this library should not create instances of this + * class. Instances of this class are created by the library when + * needed. + */ + function Auth_OpenID_AuthRequest($endpoint, $assoc) + { + $this->assoc = $assoc; + $this->endpoint = $endpoint; + $this->return_to_args = array(); + $this->message = new Auth_OpenID_Message( + $endpoint->preferredNamespace()); + $this->_anonymous = false; + } + + /** + * Add an extension to this checkid request. + * + * $extension_request: An object that implements the extension + * request interface for adding arguments to an OpenID message. + */ + function addExtension($extension_request) + { + $extension_request->toMessage($this->message); + } + + /** + * Add an extension argument to this OpenID authentication + * request. + * + * Use caution when adding arguments, because they will be + * URL-escaped and appended to the redirect URL, which can easily + * get quite long. + * + * @param string $namespace The namespace for the extension. For + * example, the simple registration extension uses the namespace + * 'sreg'. + * + * @param string $key The key within the extension namespace. For + * example, the nickname field in the simple registration + * extension's key is 'nickname'. + * + * @param string $value The value to provide to the server for + * this argument. + */ + function addExtensionArg($namespace, $key, $value) + { + return $this->message->setArg($namespace, $key, $value); + } + + /** + * Set whether this request should be made anonymously. If a + * request is anonymous, the identifier will not be sent in the + * request. This is only useful if you are making another kind of + * request with an extension in this request. + * + * Anonymous requests are not allowed when the request is made + * with OpenID 1. + */ + function setAnonymous($is_anonymous) + { + if ($is_anonymous && $this->message->isOpenID1()) { + return false; + } else { + $this->_anonymous = $is_anonymous; + return true; + } + } + + /** + * Produce a {@link Auth_OpenID_Message} representing this + * request. + * + * @param string $realm The URL (or URL pattern) that identifies + * your web site to the user when she is authorizing it. + * + * @param string $return_to The URL that the OpenID provider will + * send the user back to after attempting to verify her identity. + * + * Not specifying a return_to URL means that the user will not be + * returned to the site issuing the request upon its completion. + * + * @param bool $immediate If true, the OpenID provider is to send + * back a response immediately, useful for behind-the-scenes + * authentication attempts. Otherwise the OpenID provider may + * engage the user before providing a response. This is the + * default case, as the user may need to provide credentials or + * approve the request before a positive response can be sent. + */ + function getMessage($realm, $return_to=null, $immediate=false) + { + if ($return_to) { + $return_to = Auth_OpenID::appendArgs($return_to, + $this->return_to_args); + } else if ($immediate) { + // raise ValueError( + // '"return_to" is mandatory when + //using "checkid_immediate"') + return new Auth_OpenID_FailureResponse(null, + "'return_to' is mandatory when using checkid_immediate"); + } else if ($this->message->isOpenID1()) { + // raise ValueError('"return_to" is + // mandatory for OpenID 1 requests') + return new Auth_OpenID_FailureResponse(null, + "'return_to' is mandatory for OpenID 1 requests"); + } else if ($this->return_to_args) { + // raise ValueError('extra "return_to" arguments + // were specified, but no return_to was specified') + return new Auth_OpenID_FailureResponse(null, + "extra 'return_to' arguments where specified, " . + "but no return_to was specified"); + } + + if ($immediate) { + $mode = 'checkid_immediate'; + } else { + $mode = 'checkid_setup'; + } + + $message = $this->message->copy(); + if ($message->isOpenID1()) { + $realm_key = 'trust_root'; + } else { + $realm_key = 'realm'; + } + + $message->updateArgs(Auth_OpenID_OPENID_NS, + array( + $realm_key => $realm, + 'mode' => $mode, + 'return_to' => $return_to)); + + if (!$this->_anonymous) { + if ($this->endpoint->isOPIdentifier()) { + // This will never happen when we're in compatibility + // mode, as long as isOPIdentifier() returns False + // whenever preferredNamespace() returns OPENID1_NS. + $claimed_id = $request_identity = + Auth_OpenID_IDENTIFIER_SELECT; + } else { + $request_identity = $this->endpoint->getLocalID(); + $claimed_id = $this->endpoint->claimed_id; + } + + // This is true for both OpenID 1 and 2 + $message->setArg(Auth_OpenID_OPENID_NS, 'identity', + $request_identity); + + if ($message->isOpenID2()) { + $message->setArg(Auth_OpenID_OPENID2_NS, 'claimed_id', + $claimed_id); + } + } + + if ($this->assoc) { + $message->setArg(Auth_OpenID_OPENID_NS, 'assoc_handle', + $this->assoc->handle); + } + + return $message; + } + + function redirectURL($realm, $return_to = null, + $immediate = false) + { + $message = $this->getMessage($realm, $return_to, $immediate); + + if (Auth_OpenID::isFailure($message)) { + return $message; + } + + return $message->toURL($this->endpoint->server_url); + } + + /** + * Get html for a form to submit this request to the IDP. + * + * form_tag_attrs: An array of attributes to be added to the form + * tag. 'accept-charset' and 'enctype' have defaults that can be + * overridden. If a value is supplied for 'action' or 'method', it + * will be replaced. + */ + function formMarkup($realm, $return_to=null, $immediate=false, + $form_tag_attrs=null) + { + $message = $this->getMessage($realm, $return_to, $immediate); + + if (Auth_OpenID::isFailure($message)) { + return $message; + } + + return $message->toFormMarkup($this->endpoint->server_url, + $form_tag_attrs); + } + + /** + * Get a complete html document that will autosubmit the request + * to the IDP. + * + * Wraps formMarkup. See the documentation for that function. + */ + function htmlMarkup($realm, $return_to=null, $immediate=false, + $form_tag_attrs=null) + { + $form = $this->formMarkup($realm, $return_to, $immediate, + $form_tag_attrs); + + if (Auth_OpenID::isFailure($form)) { + return $form; + } + return Auth_OpenID::autoSubmitHTML($form); + } + + function shouldSendRedirect() + { + return $this->endpoint->compatibilityMode(); + } +} + +/** + * The base class for responses from the Auth_OpenID_Consumer. + * + * @package OpenID + */ +class Auth_OpenID_ConsumerResponse { + var $status = null; + + function setEndpoint($endpoint) + { + $this->endpoint = $endpoint; + if ($endpoint === null) { + $this->identity_url = null; + } else { + $this->identity_url = $endpoint->claimed_id; + } + } + + /** + * Return the display identifier for this response. + * + * The display identifier is related to the Claimed Identifier, but the + * two are not always identical. The display identifier is something the + * user should recognize as what they entered, whereas the response's + * claimed identifier (in the identity_url attribute) may have extra + * information for better persistence. + * + * URLs will be stripped of their fragments for display. XRIs will + * display the human-readable identifier (i-name) instead of the + * persistent identifier (i-number). + * + * Use the display identifier in your user interface. Use + * identity_url for querying your database or authorization server. + * + */ + function getDisplayIdentifier() + { + if ($this->endpoint !== null) { + return $this->endpoint->getDisplayIdentifier(); + } + return null; + } +} + +/** + * A response with a status of Auth_OpenID_SUCCESS. Indicates that + * this request is a successful acknowledgement from the OpenID server + * that the supplied URL is, indeed controlled by the requesting + * agent. This has three relevant attributes: + * + * claimed_id - The identity URL that has been authenticated + * + * signed_args - The arguments in the server's response that were + * signed and verified. + * + * status - Auth_OpenID_SUCCESS. + * + * @package OpenID + */ +class Auth_OpenID_SuccessResponse extends Auth_OpenID_ConsumerResponse { + var $status = Auth_OpenID_SUCCESS; + + /** + * @access private + */ + function Auth_OpenID_SuccessResponse($endpoint, $message, $signed_args=null) + { + $this->endpoint = $endpoint; + $this->identity_url = $endpoint->claimed_id; + $this->signed_args = $signed_args; + $this->message = $message; + + if ($this->signed_args === null) { + $this->signed_args = array(); + } + } + + /** + * Extract signed extension data from the server's response. + * + * @param string $prefix The extension namespace from which to + * extract the extension data. + */ + function extensionResponse($namespace_uri, $require_signed) + { + if ($require_signed) { + return $this->getSignedNS($namespace_uri); + } else { + return $this->message->getArgs($namespace_uri); + } + } + + function isOpenID1() + { + return $this->message->isOpenID1(); + } + + function isSigned($ns_uri, $ns_key) + { + // Return whether a particular key is signed, regardless of + // its namespace alias + return in_array($this->message->getKey($ns_uri, $ns_key), + $this->signed_args); + } + + function getSigned($ns_uri, $ns_key, $default = null) + { + // Return the specified signed field if available, otherwise + // return default + if ($this->isSigned($ns_uri, $ns_key)) { + return $this->message->getArg($ns_uri, $ns_key, $default); + } else { + return $default; + } + } + + function getSignedNS($ns_uri) + { + $args = array(); + + $msg_args = $this->message->getArgs($ns_uri); + if (Auth_OpenID::isFailure($msg_args)) { + return null; + } + + foreach ($msg_args as $key => $value) { + if (!$this->isSigned($ns_uri, $key)) { + unset($msg_args[$key]); + } + } + + return $msg_args; + } + + /** + * Get the openid.return_to argument from this response. + * + * This is useful for verifying that this request was initiated by + * this consumer. + * + * @return string $return_to The return_to URL supplied to the + * server on the initial request, or null if the response did not + * contain an 'openid.return_to' argument. + */ + function getReturnTo() + { + return $this->getSigned(Auth_OpenID_OPENID_NS, 'return_to'); + } +} + +/** + * A response with a status of Auth_OpenID_FAILURE. Indicates that the + * OpenID protocol has failed. This could be locally or remotely + * triggered. This has three relevant attributes: + * + * claimed_id - The identity URL for which authentication was + * attempted, if it can be determined. Otherwise, null. + * + * message - A message indicating why the request failed, if one is + * supplied. Otherwise, null. + * + * status - Auth_OpenID_FAILURE. + * + * @package OpenID + */ +class Auth_OpenID_FailureResponse extends Auth_OpenID_ConsumerResponse { + var $status = Auth_OpenID_FAILURE; + + function Auth_OpenID_FailureResponse($endpoint, $message = null, + $contact = null, $reference = null) + { + $this->setEndpoint($endpoint); + $this->message = $message; + $this->contact = $contact; + $this->reference = $reference; + } +} + +/** + * A specific, internal failure used to detect type URI mismatch. + * + * @package OpenID + */ +class Auth_OpenID_TypeURIMismatch extends Auth_OpenID_FailureResponse { +} + +/** + * Exception that is raised when the server returns a 400 response + * code to a direct request. + * + * @package OpenID + */ +class Auth_OpenID_ServerErrorContainer { + function Auth_OpenID_ServerErrorContainer($error_text, + $error_code, + $message) + { + $this->error_text = $error_text; + $this->error_code = $error_code; + $this->message = $message; + } + + /** + * @access private + */ + static function fromMessage($message) + { + $error_text = $message->getArg( + Auth_OpenID_OPENID_NS, 'error', '<no error message supplied>'); + $error_code = $message->getArg(Auth_OpenID_OPENID_NS, 'error_code'); + return new Auth_OpenID_ServerErrorContainer($error_text, + $error_code, + $message); + } +} + +/** + * A response with a status of Auth_OpenID_CANCEL. Indicates that the + * user cancelled the OpenID authentication request. This has two + * relevant attributes: + * + * claimed_id - The identity URL for which authentication was + * attempted, if it can be determined. Otherwise, null. + * + * status - Auth_OpenID_SUCCESS. + * + * @package OpenID + */ +class Auth_OpenID_CancelResponse extends Auth_OpenID_ConsumerResponse { + var $status = Auth_OpenID_CANCEL; + + function Auth_OpenID_CancelResponse($endpoint) + { + $this->setEndpoint($endpoint); + } +} + +/** + * A response with a status of Auth_OpenID_SETUP_NEEDED. Indicates + * that the request was in immediate mode, and the server is unable to + * authenticate the user without further interaction. + * + * claimed_id - The identity URL for which authentication was + * attempted. + * + * setup_url - A URL that can be used to send the user to the server + * to set up for authentication. The user should be redirected in to + * the setup_url, either in the current window or in a new browser + * window. Null in OpenID 2. + * + * status - Auth_OpenID_SETUP_NEEDED. + * + * @package OpenID + */ +class Auth_OpenID_SetupNeededResponse extends Auth_OpenID_ConsumerResponse { + var $status = Auth_OpenID_SETUP_NEEDED; + + function Auth_OpenID_SetupNeededResponse($endpoint, + $setup_url = null) + { + $this->setEndpoint($endpoint); + $this->setup_url = $setup_url; + } +} + + |