diff options
Diffstat (limited to 'share')
4 files changed, 227 insertions, 7 deletions
diff --git a/share/provision/files/njalla-wireguard/etc/ferm/ferm.conf b/share/provision/files/njalla-wireguard/etc/ferm/ferm.conf new file mode 100644 index 0000000..9ef8208 --- /dev/null +++ b/share/provision/files/njalla-wireguard/etc/ferm/ferm.conf @@ -0,0 +1,179 @@ +# -*- shell-script -*- +# +# Configuration file for ferm(1). +# +# V: 0.1 +# +# ferm manual: http://ferm.foo-projects.org/download/2.2/ferm.html +# Blog post: https://blog.ipredator.se/linux-firewall-howto.html +# + +# Really make sure that these modules exist and are loaded. +@hook pre "/sbin/modprobe nf_conntrack_ftp"; +@hook pre "/sbin/modprobe nfnetlink_log"; + +# Network interfaces. +#@def $DEV_LAN = eth0; +@def $DEV_LAN = ens3; +@def $DEV_LOOPBACK = lo0; +@def $DEV_VPN = wg0; + +# Network definition for the loopback device. This is needed to allow +# DNS resolution on Ubuntu Linux where the local resolver is bound +# to 127.0.1.1 - as opposed to the default 127.0.0.1. +@def $NET_LOOPBACK = 127.0.0.0/8; + +# Common application ports. +@def $PORT_DNS = 53; +@def $PORT_FTP = ( 20 21 ); +@def $PORT_NTP = 123; +@def $PORT_SSH = 22; +@def $PORT_WEB = ( 80 443 ); + +# The ports we allow to connect to. +@def $PORT_WIREGUARD = ( 51820 ); + +# See https://blog.ipredator.se/howto/restricting-transmission-to-the-vpn-interface-on-ubuntu-linux.html +# Ports Transmission is allowed to use. +@def $PORT_TRANSMISSION = 16384:65535; + +# Public DNS servers and those that are only reachable via VPN. +# DNS servers are specified in the outbound DNS rules to prevent DNS leaks +# (https://www.dnsleaktest.com/). The public DNS servers configured on your +# system should be the IPredator ones (https://www.ipredator.se/page/services#service_dns), +# but you need to verify this. +# +@def $IP_DNS_IPR_PUBLIC = ( 95.215.19.53/32 ); + +# Add your ISP name server to this object if you want to restrict +# which DNS servers can be queried. +@def $IP_DNS_PUBLIC = 0.0.0.0/0; + +# DNS server available within the VPN. +@def $IP_DNS_VPN = ( 95.215.19.53/32 ); + +# Make sure to use the proper VPN interface (e.g. wg0 in this case). +# Note: You cannot reference $DEV_VPN here, substition does not take +# place for commands passed to a sub shell. +@def $VPN_ACTIVE = `ip link show wg0 >/dev/null 2>/dev/null && echo 1 || echo`; + +# VPN interface conditional. If true the following rules are loaded. +@if $VPN_ACTIVE { + domain ip { + table filter { + chain INPUT { + interface $DEV_VPN { + proto (tcp udp) dport $PORT_TRANSMISSION ACCEPT; + } + } + chain OUTPUT { + # Default allowed outbound services on the VPN interface. + # If you need more simply add your rules here. + outerface $DEV_VPN { + proto (tcp udp) daddr ( $IP_DNS_VPN $IP_DNS_IPR_PUBLIC ) dport $PORT_DNS ACCEPT; + proto tcp dport $PORT_FTP ACCEPT; + proto udp dport $PORT_NTP ACCEPT; + proto tcp dport $PORT_SSH ACCEPT; + proto (tcp udp) sport $PORT_TRANSMISSION ACCEPT; + proto tcp dport $PORT_WEB ACCEPT; + } + } + } + } +} + +# The main IPv4 rule set. +domain ip { + table filter { + chain INPUT { + # The default policy for the chain. Usually ACCEPT or DROP or REJECT. + policy DROP; + + # Connection tracking. + mod state state INVALID DROP; + mod state state (ESTABLISHED RELATED) ACCEPT; + + # Allow local traffic to loopback interface. + daddr $NET_LOOPBACK ACCEPT; + + # Allow inbound SSH on your LAN interface _only_. + interface $DEV_LAN { + proto tcp dport $PORT_SSH ACCEPT; + } + + # Respond to ping ... makes debugging easier. + proto icmp icmp-type echo-request ACCEPT; + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + + chain OUTPUT { + policy DROP; + + # Connection tracking. + mod state state INVALID DROP; + mod state state (ESTABLISHED RELATED) ACCEPT; + + # Allow local traffic from the loopback interface. + saddr $NET_LOOPBACK ACCEPT; + + # Respond to ping. + proto icmp icmp-type echo-request ACCEPT; + + # Allowed services on the LAN interface. + outerface $DEV_LAN { + proto (tcp udp) daddr $IP_DNS_PUBLIC dport $PORT_DNS ACCEPT; + proto udp dport $PORT_NTP ACCEPT; + proto (tcp udp) dport $PORT_WIREGUARD ACCEPT; + proto tcp dport $PORT_SSH ACCEPT; + } + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + + chain FORWARD { + policy DROP; + + # If you use your machine to route traffic eg. + # from a VM you have to add rules here! + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + } +} + +# IPv6 is generally disabled, communication on the loopback device is allowed. +domain ip6 { + table filter { + chain INPUT { + policy DROP; + + # Allow local traffic. + interface $DEV_LOOPBACK ACCEPT; + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + chain OUTPUT { + policy DROP; + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + chain FORWARD { + policy DROP; + + # Log dropped packets. + NFLOG nflog-group 1; + DROP; + } + } +} diff --git a/share/provision/files/njalla-wireguard/etc/udev/rules.d/81-vpn-firewall.rules b/share/provision/files/njalla-wireguard/etc/udev/rules.d/81-vpn-firewall.rules new file mode 100644 index 0000000..8c9d744 --- /dev/null +++ b/share/provision/files/njalla-wireguard/etc/udev/rules.d/81-vpn-firewall.rules @@ -0,0 +1,2 @@ +KERNEL=="wg0", ACTION=="add", RUN+="/usr/local/bin/fermreload.sh add" +KERNEL=="wg0", ACTION=="remove", RUN+="/usr/local/bin/fermreload.sh remove" diff --git a/share/provision/files/njalla-wireguard/usr/local/bin/fermreload.sh b/share/provision/files/njalla-wireguard/usr/local/bin/fermreload.sh new file mode 100755 index 0000000..cebf7cc --- /dev/null +++ b/share/provision/files/njalla-wireguard/usr/local/bin/fermreload.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# +# fermreload.sh +# V: 0.1 +# +# Reloads the ferm firewall ruleset and is invoked by +# the udev via /etc/udev/rules.d/81-vpn-firewall.rules. +# +# IPredator 2014 +# Released under the Kopimi license. +# +# Blog post: https://blog.ipredator.se/linux-firewall-howto.html +# + +LOGGER=/usr/bin/logger +LOGGER_TAG=$0 + +UDEV_ACTION=$1 + +FERM=/usr/sbin/ferm +FERM_CONF=/etc/ferm/ferm.conf + +MSG_FW_RULE_ADD="Adding VPN firewall rules." +MSG_FW_RULE_REMOVE="Removing VPN firewall rules." +MSG_UDEV_ACTION_UNKNOWN="Unknown udev action." + +case "$UDEV_ACTION" in + add) + $LOGGER -t $LOGGER_TAG $MSG_FW_RULE_ADD + $FERM $FERM_CONF + ;; + remove) + $LOGGER -t $LOGGER_TAG $MSG_FW_RULE_REMOVE + $FERM $FERM_CONF + ;; + *) + $LOGGER -t $LOGGER_TAG $MSG_UDEV_ACTION_UNKNOWN + exit 1 +esac diff --git a/share/provision/njalla-wireguard b/share/provision/njalla-wireguard index fe3d7fe..df364bf 100755 --- a/share/provision/njalla-wireguard +++ b/share/provision/njalla-wireguard @@ -30,13 +30,13 @@ APT_INSTALL="sudo LC_ALL=C DEBIAN_FRONTEND=noninteractive apt-get install -y" $DIRNAME/wireguard $HOSTNAME $DOMAIN $MIRROR # Firewall -#$APT_INSTALL ferm ulogd2 ulogd2-pcap -#sudo cp $DIRNAME/files/njalla-wireguard/etc/ferm/ferm.conf /etc/ferm -#sudo cp $DIRNAME/files/njalla-wireguard/etc/udev/rules.d/81-vpn-firewall.rules /etc/udev/rules.d -#sudo cp $DIRNAME/files/njalla-wireguard/usr/local/bin/fermreload.sh /usr/local/bin -#sudo chmod 555 /usr/local/bin/fermreload.sh -#sudo sed -i -e 's/^ENABLED=.*$/ENABLED="yes"/' /etc/default/ferm -#sudo service ferm restart +$APT_INSTALL ferm ulogd2 ulogd2-pcap +sudo cp $DIRNAME/files/njalla-wireguard/etc/ferm/ferm.conf /etc/ferm +sudo cp $DIRNAME/files/njalla-wireguard/etc/udev/rules.d/81-vpn-firewall.rules /etc/udev/rules.d +sudo cp $DIRNAME/files/njalla-wireguard/usr/local/bin/fermreload.sh /usr/local/bin +sudo chmod 555 /usr/local/bin/fermreload.sh +sudo sed -i -e 's/^ENABLED=.*$/ENABLED="yes"/' /etc/default/ferm +sudo service ferm restart # Njalla echo "Please configure /etc/wireguard/ng0.conf" |