13 files changed, 0 insertions, 419 deletions
diff --git a/debian/README.Debian b/debian/README.Debian
deleted file mode 100644
index cc5f42d..0000000
--- a/debian/README.Debian
+++ /dev/null
@@ -1,6 +0,0 @@
-keyringer for Debian
---------------------
-
-<possible notes regarding this package - if none, delete this file>
-
- -- Silvio Rhatto <rhatto@riseup.net>  Tue, 26 Jun 2012 16:33:57 -0300
diff --git a/debian/README.source b/debian/README.source
deleted file mode 100644
index da1fcdf..0000000
--- a/debian/README.source
+++ /dev/null
@@ -1,9 +0,0 @@
-keyringer for Debian
---------------------
-
-<this file describes information about the source package, see Debian policy
-manual section 4.14. You WILL either need to modify or delete this file>
-
-
-
-
diff --git a/debian/emacsen-install.ex b/debian/emacsen-install.ex
deleted file mode 100644
index a710d38..0000000
--- a/debian/emacsen-install.ex
+++ /dev/null
@@ -1,45 +0,0 @@
-#! /bin/sh -e
-# /usr/lib/emacsen-common/packages/install/keyringer
-
-# Written by Jim Van Zandt <jrv@debian.org>, borrowing heavily
-# from the install scripts for gettext by Santiago Vila
-# <sanvila@ctv.es> and octave by Dirk Eddelbuettel <edd@debian.org>.
-
-FLAVOR=$1
-PACKAGE=keyringer
-
-if [ ${FLAVOR} = emacs ]; then exit 0; fi
-
-echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR}
-
-#FLAVORTEST=`echo $FLAVOR | cut -c-6`
-#if [ ${FLAVORTEST} = xemacs ] ; then
-#    SITEFLAG="-no-site-file"
-#else
-#    SITEFLAG="--no-site-file"
-#fi
-FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
-
-ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
-ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-
-# Install-info-altdir does not actually exist.
-# Maybe somebody will write it.
-if test -x /usr/sbin/install-info-altdir; then
-    echo install/${PACKAGE}: install Info links for ${FLAVOR}
-    install-info-altdir --quiet --section "" "" --dirname=${FLAVOR} /usr/share/info/${PACKAGE}.info.gz
-fi
-
-install -m 755 -d ${ELCDIR}
-cd ${ELDIR}
-FILES=`echo *.el`
-cp ${FILES} ${ELCDIR}
-cd ${ELCDIR}
-
-cat << EOF > path.el
-(setq load-path (cons "." load-path) byte-compile-warnings nil)
-EOF
-${FLAVOR} ${FLAGS} ${FILES}
-rm -f *.el path.el
-
-exit 0
diff --git a/debian/emacsen-remove.ex b/debian/emacsen-remove.ex
deleted file mode 100644
index 62b90e5..0000000
--- a/debian/emacsen-remove.ex
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh -e
-# /usr/lib/emacsen-common/packages/remove/keyringer
-
-FLAVOR=$1
-PACKAGE=keyringer
-
-if [ ${FLAVOR} != emacs ]; then
-    if test -x /usr/sbin/install-info-altdir; then
-        echo remove/${PACKAGE}: removing Info links for ${FLAVOR}
-        install-info-altdir --quiet --remove --dirname=${FLAVOR} /usr/share/info/keyringer.info.gz
-    fi
-
-    echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR}
-    rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE}
-fi
diff --git a/debian/emacsen-startup.ex b/debian/emacsen-startup.ex
deleted file mode 100644
index aa39fde..0000000
--- a/debian/emacsen-startup.ex
+++ /dev/null
@@ -1,25 +0,0 @@
-;; -*-emacs-lisp-*-
-;;
-;; Emacs startup file, e.g.  /etc/emacs/site-start.d/50keyringer.el
-;; for the Debian keyringer package
-;;
-;; Originally contributed by Nils Naumann <naumann@unileoben.ac.at>
-;; Modified by Dirk Eddelbuettel <edd@debian.org>
-;; Adapted for dh-make by Jim Van Zandt <jrv@debian.org>
-
-;; The keyringer package follows the Debian/GNU Linux 'emacsen' policy and
-;; byte-compiles its elisp files for each 'emacs flavor' (emacs19,
-;; xemacs19, emacs20, xemacs20...).  The compiled code is then
-;; installed in a subdirectory of the respective site-lisp directory.
-;; We have to add this to the load-path:
-(let ((package-dir (concat "/usr/share/"
-                           (symbol-name flavor)
-                           "/site-lisp/keyringer")))
-;; If package-dir does not exist, the keyringer package must have
-;; removed but not purged, and we should skip the setup.
-  (when (file-directory-p package-dir)
-    (setq load-path (cons package-dir load-path))
-    (autoload 'keyringer-mode "keyringer-mode"
-      "Major mode for editing keyringer files." t)
-    (add-to-list 'auto-mode-alist '("\\.keyringer$" . keyringer-mode))))
-
diff --git a/debian/init.d.ex b/debian/init.d.ex
deleted file mode 100644
index 34773e0..0000000
--- a/debian/init.d.ex
+++ /dev/null
@@ -1,154 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          keyringer
-# Required-Start:    $network $local_fs
-# Required-Stop:
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: <Enter a short description of the sortware>
-# Description:       <Enter a long description of the software>
-#                    <...>
-#                    <...>
-### END INIT INFO
-
-# Author: Silvio Rhatto <rhatto@riseup.net>
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC=keyringer             # Introduce a short description here
-NAME=keyringer             # Introduce the short server's name here
-DAEMON=/usr/sbin/keyringer # Introduce the server's location here
-DAEMON_ARGS=""             # Arguments to run the daemon with
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x $DAEMON ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
-		$DAEMON_ARGS \
-		|| return 2
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
-}
-
-case "$1" in
-  start)
-    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
-    do_start
-    case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-  ;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-       ;;
-  #reload|force-reload)
-	#
-	# If do_reload() is not implemented then leave this commented out
-	# and leave 'force-reload' as an alias for 'restart'.
-	#
-	#log_daemon_msg "Reloading $DESC" "$NAME"
-	#do_reload
-	#log_end_msg $?
-	#;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-	  	# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-:
diff --git a/debian/keyringer.cron.d.ex b/debian/keyringer.cron.d.ex
deleted file mode 100644
index 2bf1942..0000000
--- a/debian/keyringer.cron.d.ex
+++ /dev/null
@@ -1,4 +0,0 @@
-#
-# Regular cron jobs for the keyringer package
-#
-0 4	* * *	root	[ -x /usr/bin/keyringer_maintenance ] && /usr/bin/keyringer_maintenance
diff --git a/debian/keyringer.default.ex b/debian/keyringer.default.ex
deleted file mode 100644
index 808251b..0000000
--- a/debian/keyringer.default.ex
+++ /dev/null
@@ -1,10 +0,0 @@
-# Defaults for keyringer initscript
-# sourced by /etc/init.d/keyringer
-# installed at /etc/default/keyringer by the maintainer scripts
-
-#
-# This is a POSIX shell fragment
-#
-
-# Additional options that are passed to the Daemon.
-DAEMON_OPTS=""
diff --git a/debian/menu.ex b/debian/menu.ex
deleted file mode 100644
index 30b4aa5..0000000
--- a/debian/menu.ex
+++ /dev/null
@@ -1,2 +0,0 @@
-?package(keyringer):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\
-  title="keyringer" command="/usr/bin/keyringer"
diff --git a/debian/postinst.ex b/debian/postinst.ex
deleted file mode 100644
index 4c62489..0000000
--- a/debian/postinst.ex
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-# postinst script for keyringer
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
diff --git a/debian/postrm.ex b/debian/postrm.ex
deleted file mode 100644
index 65dec06..0000000
--- a/debian/postrm.ex
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-# postrm script for keyringer
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
diff --git a/debian/preinst.ex b/debian/preinst.ex
deleted file mode 100644
index 6421ff8..0000000
--- a/debian/preinst.ex
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-# preinst script for keyringer
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <new-preinst> `install'
-#        * <new-preinst> `install' <old-version>
-#        * <new-preinst> `upgrade' <old-version>
-#        * <old-preinst> `abort-upgrade' <new-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    install|upgrade)
-    ;;
-
-    abort-upgrade)
-    ;;
-
-    *)
-        echo "preinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
diff --git a/debian/prerm.ex b/debian/prerm.ex
deleted file mode 100644
index 3ed5387..0000000
--- a/debian/prerm.ex
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# prerm script for keyringer
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <prerm> `remove'
-#        * <old-prerm> `upgrade' <new-version>
-#        * <new-prerm> `failed-upgrade' <old-version>
-#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
-#        * <deconfigured's-prerm> `deconfigure' `in-favour'
-#          <package-being-installed> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0