From 3577626b1014036e0df1786b616ddd53c6225081 Mon Sep 17 00:00:00 2001
From: Silvio Rhatto <rhatto@riseup.net>
Date: Tue, 10 Apr 2012 12:56:19 -0300
Subject: Provision: using parted for automatic partitioning; option to not use
 a swap device

---
 share/hydractl/provision | 78 ++++++++++++++++++++++++++++--------------------
 1 file changed, 46 insertions(+), 32 deletions(-)

(limited to 'share/hydractl')

diff --git a/share/hydractl/provision b/share/hydractl/provision
index f12bb5a..26abd8e 100755
--- a/share/hydractl/provision
+++ b/share/hydractl/provision
@@ -22,7 +22,7 @@ hydra_config_load
 
 # Setup.
 hydra_user_input device /dev/sdb "Destination device"
-hydra_user_input swap_device /dev/sda1 "Final swap device"
+hydra_user_input swap y "Use swap? (y/n)"
 hydra_user_input encrypt y "Encrypt system and storage volumes? (y/n)"
 hydra_user_input garbage y "Pre-fill volumes with garbage? (y/n)"
 hydra_user_input hostname $HOSTNAME "Hostname"
@@ -34,43 +34,51 @@ hydra_user_input grub n "Setup GRUB? (y/n)"
 hydra_user_input mirror http://cdn.debian.net/debian/ "Debian mirror"
 
 # Check for requirements.
-for req in debootstrap cryptsetup grub-pc lvm2; do
+for req in debootstrap cryptsetup grub-pc lvm2 parted; do
   hydra_install_package $req
 done
 
 # Warning.
 cat <<-EOF
-Make sure you have chosen the right parameters and that $device has the needed partitions:
-
-    # fdisk -l $device
-    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
-    255 heads, 63 sectors/track, 121601 cylinders
-    Units = cilindros of 16065 * 512 = 8225280 bytes
-    Disk identifier: 0x00000000
-    
-    Dispositivo Boot      Start         End      Blocks   Id  System
-    ${device}1               1         249     2000061   82  Linux swap
-    ${device}2   *         250         273      192780   83  Linux
-    ${device}3             274      121601   974567160   8e  Linux LVM
-
-The number of blocks are figurative: the important thing is to have the
-partition layout listed above.
-
+WARNING: about to partition $device!
 Press ENTER to continue, Ctrl-C to abort."
 EOF
 read answer
 
+# Disk partitioning.
+if [ "$swap" == "y" ]; then
+  parted -s -- $device unit MB mkpart primary linux-swap 0     2000
+  parted -s -- $device unit MB mkpart primary ext2       2000  2200
+  parted -s -- $device unit MB mkpart primary ext2       2200 -1
+  parted -s -- set 2 boot on
+  parted -s -- set 3 lvm  on
+
+  # Change devices to absolute path names.
+  swap_device="$device"1
+  boot_device="$device"2
+  syst_device="$device"3
+else
+  parted -s -- $device unit MB mkpart primary ext2 0    200
+  parted -s -- $device unit MB mkpart primary ext2 200 -1
+  parted -s -- set 1 boot on
+  parted -s -- set 2 lvm  on
+
+  # Change devices to absolute path names.
+  boot_device="$device"1
+  syst_device="$device"2
+fi
+
 # Create volumes.
 echo "Creating the needed disk volumes..."
 
-if ! pvdisplay "$device"3 &> /dev/null; then
+if ! pvdisplay $syst_device &> /dev/null; then
   echo "Creating physical volume..."
-  pvcreate "$device"3
+  pvcreate $syst_device
 fi
 
 if ! vgdisplay $vg &> /dev/null; then
   echo "Creating volume group..."
-  vgcreate $vg "$device"3
+  vgcreate $vg $syst_device
 fi
 
 if ! lvdisplay $vg/root &> /dev/null; then
@@ -84,7 +92,9 @@ vgchange -a y $vg
 if [ "$garbage" == "y" ]; then
   echo "Filling volumes with garbage..."
   dd if=/dev/urandom of=/dev/$vg/root
-  dd if=/dev/urandom of="$device"1
+  if [ "$swap" == "y" ]; then
+    dd if=/dev/urandom of=$swap_device
+  fi
 fi
 
 # Setup mountpoint and make sure it's not mounted due to a failed install.
@@ -138,14 +148,17 @@ chroot /tmp/debootstrap/ apt-get install locales cryptsetup lvm2 initramfs-tools
 
 # Crypttab.
 echo "Configuring crypttab..."
+echo "" > /tmp/debootstrap/etc/crypttab
+
 if [ "$encrypt" == "y" ]; then
   cat > /tmp/debootstrap/etc/crypttab <<-EOF
 # <target name> <source device>   <key file>  <options>
 root            /dev/mapper/vg-root     none            luks,cipher=aes-cbc-essiv:sha256
-cswap           $swap_device               /dev/random     swap,cipher=aes-cbc-essiv:sha256
 EOF
-else
-  cat > /tmp/debootstrap/etc/crypttab <<-EOF
+fi
+
+if [ "$swap" == "y" ]; then
+  cat >> /tmp/debootstrap/etc/crypttab <<-EOF
 # <target name> <source device>   <key file>  <options>
 cswap           $swap_device               /dev/random     swap,cipher=aes-cbc-essiv:sha256
 EOF
@@ -153,24 +166,25 @@ fi
 
 # Fstab.
 echo "Configuring fstab..."
+echo "" > /tmp/debootstrap/etc/fstab
 if [ "$encrypt" == "y" ]; then
   cat > /tmp/debootstrap/etc/fstab <<-EOF
-/dev/mapper/cswap none swap sw 0 0
 /dev/mapper/root  /    ext3 defaults,errors=remount-ro 0 1
 EOF
-else
-  cat > /tmp/debootstrap/etc/fstab <<-EOF
+fi
+
+if [ "$swap" == "y" ]; then
+  cat >> /tmp/debootstrap/etc/fstab <<-EOF
 /dev/mapper/cswap none swap sw 0 0
-/dev/vg/root      /    ext3 defaults,errors=remount-ro 0 1
 EOF
 fi
 
 # Grub.
 if [ "$grub" == "y" ]; then
   echo "Boot device setup..."
-  mkfs.ext3 "$device"2
-  mount "$device"2 /tmp/debootstrap/boot
-  echo "$device""2 /boot ext3 defaults,errors=remount-ro 0 2" >> /tmp/debootstrap/etc/fstab
+  mkfs.ext3 $boot_device
+  mount $boot_device /tmp/debootstrap/boot
+  echo "$boot_device /boot ext3 defaults,errors=remount-ro 0 2" >> /tmp/debootstrap/etc/fstab
 
   echo "Setting up GRUB..."
   chroot /tmp/debootstrap/ apt-get install grub-pc -y
-- 
cgit v1.2.3