#!/bin/bash
#
# firma v0.2.4: encrypted mailing list manager
# feedback: rhatto@riseup.net luis@riseup.net | GPL
#
# list configuration is passed thru the config file,
# where you put PARAMETER=value (whithout spaces)
#
# MAIL= path for mail program
# GPG= path for gnupg binary
# LISTNAME= list email
# LISTADMIN= list administrator email addresses (space separated)
# GPGDIR= gpg dir for the lists' keyring
# PASSWD= passwd for the lists' keyring
#

VERSION=0.2.4

function usage {
  echo usage: $0 firma \<option\> \<config-file\>
  echo -c: create a new list using config-file
  echo -p: process a message 
  echo -a: admin commands
}

function check_config {
  # check configuration file parameters
  if [ ! -f $GPG -o ! -x $GPG ]; then
    echo -e "\n$1: GPG binary ($GPG) could not be found.\n"
    exit 1
  elif [ ! -f $MAIL -o ! -x $MAIL ]; then
    echo -e "\n$1: Mail program ($MAIL) could not be found.\n"
    exit 1
  elif [ ! -d $GPGDIR -o ! -f $GPGDIR/pubring.gpg -o ! -f $GPGDIR/secring.gpg ]; then
    echo -e "\n$1: GPG home directory ($GPGDIR) or the GPG keyrings could not be found.\n"
      exit 1
  elif [ -z "$(cat $CONFIG | grep -o ^PASSWD=\'[^\']*\'$)" -o \
         -z "$(echo -n $PASSWD)" -o \
         "$(echo -n $PASSWD | wc -m)" -lt "25" -o \
         -z "$(echo -n $PASSWD | grep -o [[:lower:][:upper:]])" -o \
         -z "$(echo -n $PASSWD | grep -o [[:digit:]])" -o \
         "$(echo -n $PASSWD | grep -o [[:punct:]] | wc -l)" -lt "5" ]; then
    echo -e "\n$CONFIG: PASSWD is empty or does not meet the minimum complexity requirements."
    echo "$1: Please set a new passphrase for the list's private key. Make it at least"
    echo "$1: 25 characters long (using a combination of letters, numbers and at least"
    echo "$1: 5 special characters) and enclose it in 'single quotes'. The passphrase"
    echo -e "$CONFIG: itself, though, cannot contain any single quote.\n"
    exit 1
  elif [ -z "$($GPGLIST | grep ^pub | cut -d : -f 10 | grep -i \<$LISTNAME\>$)" ]; then
    echo -e "\n$CONFIG: GPG key for list \"$LISTNAME\" could not be found."
    echo -e "$CONFIG: Note that this parameter expects an email address.\n"
    exit 1
  else
    for ADMIN in $LISTADMIN; do {
      if [ -z "$($GPGLIST | grep ^pub | cut -d : -f 10 | grep -i \<$ADMIN\>$)" ]; then
        echo -e "\n$CONFIG: GPG key for list administrator \"$ADMIN\" could not be found."
        echo -e "$CONFIG: Note that this parameter expects one or more space separated email addresses.\n"
        exit 1
      fi; }
    done
  fi
}

function GPGSTDERR {
  # discard $GPGDECRYPT STDOUT and get its STDERR instead, for signature checking
  echo -e "$PASSWD\n${GPG_MESSAGE[@]}" | sed -e 's/^ //' | ($GPGDECRYPT --status-fd 2 1> /dev/null) 2>&1 ;
}

function SUBSCRIBERS {
  # get list susbscriber's addresses
  $GPGLIST | sed -ne "/$LISTNAME/Id" -e '/pub/p' | cut -d : -f 10 | grep -o '<[^<>]*>$' | sed -e 's/[<>]//g' ;
}

function get_message {
  n=0;
  while read STDIN; do
    MESSAGE[$n]="$STDIN\n"
    ((++n))
  done
}

function get_gpg_message {
  signal=0; x=0;
  for ((count=0;count<=n;count++)); do
    if [[ $signal == "0" ]] && [[ "$(echo "${MESSAGE[$count]}" | grep -v -e "-----BEGIN PGP MESSAGE-----")" == "" ]]; then
      GPG_MESSAGE[$x]=${MESSAGE[$count]}; ((++x))
      signal=1
    elif [[ $signal == "1" ]]; then
      GPG_MESSAGE[$x]=${MESSAGE[$count]}
      ((++x))
      if [[ "$(echo "${MESSAGE[$count]}" | grep -v -e "-----END PGP MESSAGE-----")" == "" ]]; then
        signal=0
      fi
    fi
  done
}

function get_headers {
  # get the message headers and the sender's email address
  FROM=$(echo -e "${MESSAGE[@]}" | grep -m 1 "From:" | cut -d : -f 2- | sed -e 's/^ //')
  FROMADD=$(if [ -z "$(echo $FROM | grep '>$')" ] ; then echo $FROM ; else echo $FROM | grep -o '<[^<>]*>$' | sed -e 's/[<>]//
g' ; fi)
  DATE=$(echo -e "${MESSAGE[@]}" | grep -m 1 "Date:")
  SUBJECT=$(echo -e "${MESSAGE[@]}" | grep -m 1 "Subject:" | cut -d : -f 2- | sed -e 's/^ //')
}

function process_message {
  # process a message sent to the list

  get_message
  get_headers 
  get_gpg_message

  # if signature is Good, encrypt and send it for each list subscriber
  # todo: declare a function to decrypt, re-encrypt and send the list messages
  if (GPGSTDERR | grep -Fq GOODSIG) ; then
  
    for EMAIL in $(SUBSCRIBERS); do 
  
    echo "$PASSWD
    Message from: $FROM
    Subject: $SUBJECT
    $DATE
  
    $(GPGSTDERR | grep -F 'gpg: Signature made')
    $(GPGSTDERR | grep -F 'gpg: Good signature from')
  
  $(echo -e "$PASSWD\n${GPG_MESSAGE[@]}" | $GPGDECRYPT 2> /dev/null)" | sed -e 's/=20$//' | $GPGENCRYPT $EMAIL | $MAIL -r $LISTNAME $EMAIL
  
    done
  
  # else, if signature is BAD, email it back to the list admins and to sender
  elif (GPGSTDERR | grep -Fq BADSIG) ; then
  
    for EMAIL in $(echo $LISTADMIN $FROMADD); do
  
    echo "$PASSWD
    Message from: $FROM
    Subject: [BAD SIGNATURE] $SUBJECT
    $DATE
  
    $(GPGSTDERR | grep -F 'gpg: Signature made')
    $(GPGSTDERR | grep -F 'gpg: BAD signature from')
  
  $(echo -e "$PASSWD\n${GPG_MESSAGE[@]}" | $GPGDECRYPT 2> /dev/null)" | sed -e 's/=20$//' | $GPGENCRYPT $EMAIL | $MAIL -r $LISTNAME $EMAIL
  
    done
  
  # else, probably either the message was not signed or the sender is not subscribed to the list
  # email the message back to sender including a note about this
  # todo: parse STDERR to find out why the signature couldn't be checked and send more specific errors back to sender
  else
  
    echo "
    Message from: $FROM
    Subject: [RETURNED MAIL] $SUBJECT
    $DATE
  
    [ It was not possible to process this message. Either or both
      the message was not encrypted and/or signed, or you are not
      subscribed to this list.  Contact the list administrator if
      you have any questions. ]
 
    -- 
    firma v$VERSION" | $MAIL -r $LISTNAME $FROMADD
  
  fi
   
}

# main -
# command line checking
if [ -z $2 ]; then
  usage; exit 1
else
  CONFIG=$2
fi

# if the configuration file exists, disable "sourcepath" and evaluate the parameters
if [ -f $CONFIG ] && [[ $1 != "-c" ]]; then
  shopt -u sourcepath && source $CONFIG
else
  echo -e "\nConfiguration file \"$CONFIG\" could not be found.\n"
  exit 1
fi

declare -a MESSAGE
declare -a GPG_MESSAGE
declare n
export LANG=en_US

# declare GPG variables
GPGCOMMAND="$GPG --quiet --homedir $GPGDIR --batch --no-tty --no-use-agent --no-permission-warning"
GPGLIST="$GPGCOMMAND --list-keys --with-colons"
GPGDECRYPT="$GPGCOMMAND --passphrase-fd 0 --decrypt"
GPGENCRYPT="$GPGCOMMAND --passphrase-fd 0 --always-trust --encrypt --sign --armor --recipient"

# then check the config
check_config

# command line parsing
if [[ $1 == "-c" ]]; then
  newlist 
elif [[ $1 == "-p" ]]; then
  process_message
elif [[ $1 == "-a" ]]; then
  admin_task
else
  usage; exit 1
fi