diff options
Diffstat (limited to 'handlers')
| -rw-r--r-- | handlers/rsync.in | 1128 |
1 files changed, 922 insertions, 206 deletions
diff --git a/handlers/rsync.in b/handlers/rsync.in index 9baa2f2..de746d5 100644 --- a/handlers/rsync.in +++ b/handlers/rsync.in @@ -2,10 +2,11 @@ # backupninja handler to do incremental backups using # rsync and hardlinks, based on # -# http://www.mikerubel.org/computers/rsync_snapshots/ +# - http://www.mikerubel.org/computers/rsync_snapshots/ +# - rsnap handler by paulv at bikkel.org +# - maildir handler from backupninja # # feedback: rhatto at riseup.net | gpl -# lot of enhancements grabbed from "rsnap" handler by paulv at bikkel.org # # Config file options # ------------------- @@ -15,21 +16,29 @@ # partition = partition where the backup lives # fscheck = set to 1 if fsck should run on $partition after the backup is made # read_only = set to 1 if $partition is mounted read-only -# mountpoint = backup partition mountpoint or backup main folder -# backupdir = folder relative do $mountpoint where the backup should be stored -# days = number of backup increments (min = 5) +# mountpoint = backup partition mountpoint or backup main folder (either local or remote) +# backupdir = folder relative do $mountpoint where the backup should be stored (local or remote) +# format = specify backup storage format: short, long or mirror (i.e, no rotations) +# days = for short storage format, specify the number of backup increments (min = 5) +# keepdaily = for long storage format, specify the number of daily backup increments +# keepweekly = for long storage format, specify the number of weekly backup increments +# keepmonthly = for long storage format, specify the number of monthly backup increments # lockfile = lockfile to be kept during backup execution # nicelevel = rsync command nice level # enable_mv_timestamp_bug = set to "yes" if your system isnt handling timestamps correctly # tmp = temp folder +# multiconnection = set to "yes" if you want to use multiconnection ssh support # # [source] # from = local or remote # host = source hostname or ip, if remote backup +# port = remote port number (remote source only) +# user = remote user name (remote source only) # testconnect = when "yes", test the connection for a remote source before backup # include = include folder on backup # exclude = exclude folder on backup -# ssh = ssh command line (remote only) +# ssh = ssh command line (remote source only) +# protocol = ssh or rsync (remote source only) # rsync = rsync program # rsync_options = rsync command options # exclude_vserver = vserver-name (valid only if vservers = yes on backupninja.conf) @@ -37,6 +46,28 @@ # compress = if set to 1, compress data on rsync (remote source only) # bandwidthlimit = set a badnwidth limit in kbps (remote source only) # remote_rsync = remote rsync program (remote source only) +# id_file = ssh key file (remote source only) +# batch = set to "yes" to rsync use a batch file as source +# batchbase = folder where the batch file is located +# filelist = set yes if you want rsync to use a file list source +# filelistbase = folder where the file list is placed +# +# [dest] +# dest = backup destination type (local or remote) +# testconnect = when "yes", test the connection for a remote source before backup +# ssh = ssh command line (remote dest only) +# protocol = ssh or rsync (remote dest only) +# numericids = when set to 1, use numeric ids instead of user/group mappings on rsync +# compress = if set to 1, compress data on rsync (remote source only) +# host = destination host name (remote destination only) +# port = remote port number (remote destination only) +# user = remote user name (remote destination only) +# id_file = ssh key file (remote destination only) +# bandwidthlimit = set a badnwidth limit in kbps (remote destination only) +# remote_rsync = remote rsync program (remote dest only) +# batch = set to "yes" to rsync write a batch file from the changes +# batchbase = folder where the batch file should be written +# fakesuper = set to yes so rsync use the --fake-super flag (remote destination only) # # [services] # initscripts = absolute path where scripts are located @@ -54,297 +85,982 @@ # You dont need to manually specify vservers using "include = /vservers". # They are automatically backuped if vserver is set to "yes" on you backupninja.conf. # - -# config file evaluation - -setsection system -getconf rm rm -getconf cp cp -getconf touch touch -getconf mv mv -getconf fsck fsck - -setsection general -getconf log /var/log/backup/rsync.log -getconf partition -getconf fscheck -getconf read_only -getconf mountpoint -getconf backupdir -getconf rotate -getconf days -getconf lockfile -getconf nicelevel 0 -getconf enable_mv_timestamp_bug no -getconf tmp /tmp - -setsection source -getconf from local -getconf testconnect no -getconf rsync $RSYNC -getconf rsync_options "-av --delete" -getconf ssh ssh -getconf user -getconf host -getconf include -getconf exclude -getconf exclude_vserver -getconf numericids 0 -getconf compress 0 -getconf bandwidthlimit -getconf remote_rsync rsync - -setsection services -getconf initscripts -getconf service +# Changelog +# --------- +# +# 20090329 - rhatto at riseup.net +# +# - Added support for: +# - Remote destinations +# - Long rotation format similar to maildir handler +# - Batch files through --read-batch and --write-batch +# - Custom file list using --files-from +# - SSH persistent connection using ControlMaster +# - The rsync:// protocol +# - Metadata folder for each backup folder +# - General refactoring +# - Code cleanup +# # function definitions -function rotate { +function eval_config { + + # system section + + setsection system + getconf rm rm + getconf cp cp + getconf touch touch + getconf mv mv + getconf fsck fsck + + # general section + + setsection general + getconf log /var/log/backup/rsync.log + getconf partition + getconf fscheck + getconf read_only + getconf mountpoint + getconf backupdir + getconf format short + getconf days + getconf keepdaily 5 + getconf keepweekly 3 + getconf keepmonthly 1 + getconf lockfile + getconf nicelevel 0 + getconf enable_mv_timestamp_bug no + getconf tmp /tmp + getconf multiconnection no + + # source section + + setsection source + getconf from local + getconf rsync $RSYNC + getconf rsync_options "-av --delete --recursive" + + if [ "$from" == "remote" ]; then + getconf testconnect no + getconf protocol ssh + getconf ssh ssh + getconf host + + if [ "$protocol" == "ssh" ]; then + # sshd default listen port + getconf port 22 + else + # rsyncd default listen port + getconf port 873 + fi + + getconf user + getconf bandwidthlimit + getconf remote_rsync rsync + getconf id_file /root/.ssh/id_dsa + fi + + getconf batch no - if [[ "$2" < 4 ]]; then + if [ "$batch" == "yes" ]; then + getconf batchbase + if [ ! -z "$batchbase" ]; then + batch="read" + fi + fi + + getconf filelist no + getconf filelistbase + getconf include + getconf exclude + getconf exclude_vserver + getconf numericids 0 + getconf compress 0 + + # dest section + + setsection dest + getconf dest local + getconf fakesuper no + + if [ "$dest" == "remote" ]; then + getconf testconnect no + getconf protocol ssh + getconf ssh ssh + getconf host + + if [ "$protocol" == "ssh" ]; then + # sshd default listen port + getconf port 22 + else + # rsyncd default listen port + getconf port 873 + fi + + getconf user + getconf bandwidthlimit + getconf remote_rsync rsync + getconf id_file /root/.ssh/id_dsa + fi + + getconf batch no + + if [ "$batch" != "yes" ]; then + getconf batch no + if [ "$batch" == "yes" ]; then + getconf batchbase + if [ ! -z "$batchbase" ]; then + batch="write" + fi + fi + fi + + getconf numericids 0 + getconf compress 0 + + # services section + + setsection services + getconf initscripts /etc/init.d + getconf service + + # config check + + if [ "$dest" != "local" ] && [ "$from" == "remote" ]; then + fatal "When source is remote, destination should be local." + exit 1 + fi + + if [ "$from" != "local" ] && [ "$from" != "remote" ]; then + fatal "Invalid source $from" + exit 1 + fi + + backupdir="$mountpoint/$backupdir" + + if [ "$dest" == "local" ] && [ ! -d "$backupdir" ]; then + error "Backupdir $backupdir does not exist" + exit 1 + fi + + if [ ! -z "$log" ]; then + mkdir -p `dirname $log` + fi + + if [ "$format" == "short" ]; then + if [ -z "$days" ]; then + keep="4" + else + keep="`echo $days - 1 | bc -l`" + fi + fi + + if [ ! -z "$nicelevel" ]; then + nice="nice -n $nicelevel" + else + nice="" + fi + + ssh_cmd="ssh -T -o PasswordAuthentication=no $host -p $port -l $user -i $id_file" + + if [ "$from" == "remote" ] || [ "$dest" == "remote" ]; then + if [ "$testconnect" == "yes" ] && [ "$protocol" == "ssh" ]; then + test_connect $host $port $user $id_file + fi + fi + + if [ "$multiconnection" == "yes" ]; then + ssh_cmd="$ssh_cmd -S $tmp/%r@%h:%p" + fi + + if [ $enable_mv_timestamp_bug == "yes" ]; then + mv=move_files + fi + + for path in $exclude; do + excludes="$excludes --exclude=$path" + done + +} + +function rotate_short { + + local dest + local folder="$1" + local keep="$2" + local metadata="`dirname $folder`/metadata" + + if [[ "$keep" < 4 ]]; then error "Rotate: minimum of 4 rotations" exit 1 fi - if [ -d $1.$2 ]; then - $nice $mv /$1.$2 /$1.tmp + if [ -d $folder.$keep ]; then + $nice $mv /$folder.$keep /$folder.tmp fi - for ((n=`echo "$2 - 1" | bc`; n >= 0; n--)); do - if [ -d $1.$n ]; then + for ((n=`echo "$keep - 1" | bc`; n >= 0; n--)); do + if [ -d $folder.$n ]; then dest=`echo "$n + 1" | bc` - $nice $mv /$1.$n /$1.$dest - $touch /$1.$dest + $nice $mv /$folder.$n /$folder.$dest + $touch /$folder.$dest + mkdir -p $metadata/`basename $folder`.$dest + date +%c%n%s > $metadata/`basename $folder`.$dest/rotated + fi + done + + if [ -d $folder.tmp ]; then + $nice $mv /$folder.tmp /$folder.0 + fi + + if [ -d $folder.1 ]; then + $nice $cp -alf /$folder.1/. /$folder.0 + fi + +} + +function rotate_short_remote { + + local folder="$1" + local metadata="`dirname $folder`/metadata" + local keep="$2" + + if [[ "$2" < 4 ]]; then + error "Rotate: minimum of 4 rotations" + exit 1 + fi + +( + $ssh_cmd <<EOF + ##### BEGIN REMOTE SCRIPT ##### + + if [ -d $folder.$keep ]; then + $nice mv /$folder.$keep /$folder.tmp + fi + + for ((n=$(($keep - 1)); n >= 0; n--)); do + if [ -d $folder.\$n ]; then + dest=\$((\$n + 1)) + $nice mv /$folder.\$n /$folder.\$dest + touch /$folder.\$dest + mkdir -p $metadata/`basename $folder`.\$dest + date +%c%n%s > $metadata/`basename $folder`.\$dest/rotated + fi + done + + if [ -d $folder.tmp ]; then + $nice mv /$folder.tmp /$folder.0 + fi + + if [ -d $folder.1 ]; then + $nice $cp -alf /$folder.1/. /$folder.0 + fi + ##### END REMOTE SCRIPT ####### +EOF +) | (while read a; do passthru $a; done) + +} + +function rotate_long { + + backuproot="$1" + seconds_daily=86400 + seconds_weekly=604800 + seconds_monthly=2628000 + keepdaily=$keepdaily + keepweekly=$keepweekly + keepmonthly=$keepmonthly + now=`date +%s` + + local metadata + + if [ ! -d "$backuproot" ]; then + echo "Debug: skipping rotate of $backuproot as it doesn't exist." + exit + fi + + for rottype in daily weekly monthly; do + seconds=$((seconds_${rottype})) + + dir="$backuproot/$rottype" + metadata="$backuproot/metadata/$rottype.1" + mkdir -p $metadata + if [ ! -d $dir.1 ]; then + echo "Debug: $dir.1 does not exist, skipping." + continue 1 + elif [ ! -f $metadata/created ] && [ ! -f $metadata/rotated ]; then + echo "Warning: metadata does not exist for $dir.1. This backup may be only partially completed. Skipping rotation." + continue 1 + fi + + # Rotate the current list of backups, if we can. + oldest=`find $backuproot -maxdepth 1 -type d -name $rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1` + [ "$oldest" == "" ] && oldest=0 + for (( i=$oldest; i > 0; i-- )); do + if [ -d $dir.$i ]; then + if [ -f $metadata/created ]; then + created=`tail -1 $metadata/created` + elif [ -f $metadata/rotated ]; then + created=`tail -1 $metadata/rotated` + else + created=0 + fi + cutoff_time=$(( now - (seconds*(i-1)) )) + if [ ! $created -gt $cutoff_time ]; then + next=$(( i + 1 )) + if [ ! -d $dir.$next ]; then + echo "Debug: $rottype.$i --> $rottype.$next" + $nice mv $dir.$i $dir.$next + mkdir -p $backuproot/metadata/$rottype.$next + date +%c%n%s > $backuproot/metadata/$rottype.$next/rotated + else + echo "Debug: skipping rotation of $dir.$i because $dir.$next already exists." + fi + else + echo "Debug: skipping rotation of $dir.$i because it was created" $(( (now-created)/86400)) "days ago ("$(( (now-cutoff_time)/86400))" needed)." + fi + fi + done + done + + max=$((keepdaily+1)) + if [ $keepweekly -gt 0 -a -d $backuproot/daily.$max -a ! -d $backuproot/weekly.1 ]; then + echo "Debug: daily.$max --> weekly.1" + $nice mv $backuproot/daily.$max $backuproot/weekly.1 + mkdir -p $backuproot/metadata/weekly.1 + date +%c%n%s > $backuproot/metadata/weekly.1/rotated + fi + + max=$((keepweekly+1)) + if [ $keepmonthly -gt 0 -a -d $backuproot/weekly.$max -a ! -d $backuproot/monthly.1 ]; then + echo "Debug: weekly.$max --> monthly.1" + $nice mv $backuproot/weekly.$max $backuproot/monthly.1 + mkdir -p $backuproot/metadata/monthly.1 + date +%c%n%s > $backuproot/metadata/monthly.1/rotated + fi + + for rottype in daily weekly monthly; do + max=$((keep${rottype}+1)) + dir="$backuproot/$rottype" + oldest=`find $backuproot -maxdepth 1 -type d -name $rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1` + [ "$oldest" == "" ] && oldest=0 + # if we've rotated the last backup off the stack, remove it. + for (( i=$oldest; i >= $max; i-- )); do + if [ -d $dir.$i ]; then + if [ -d $backuproot/rotate.tmp ]; then + echo "Debug: removing rotate.tmp" + $nice rm -rf $backuproot/rotate.tmp + fi + echo "Debug: moving $rottype.$i to rotate.tmp" + $nice mv $dir.$i $backuproot/rotate.tmp + fi + done + done + +} + +function rotate_long_remote { + + local backuproot="$1" + +( + $ssh_cmd <<EOF + ##### BEGIN REMOTE SCRIPT ##### + + seconds_daily=86400 + seconds_weekly=604800 + seconds_monthly=2628000 + keepdaily=$keepdaily + keepweekly=$keepweekly + keepmonthly=$keepmonthly + now=\`date +%s\` + + if [ ! -d "$backuproot" ]; then + echo "Debug: skipping rotate of $backuproot as it doesn't exist." + exit + fi + + for rottype in daily weekly monthly; do + seconds=\$((seconds_\${rottype})) + + dir="$backuproot/\$rottype" + metadata="$backuproot/metadata/\$rottype.1" + mkdir -p \$metadata + if [ ! -d \$dir.1 ]; then + echo "Debug: \$dir.1 does not exist, skipping." + continue 1 + elif [ ! -f \$metadata/created ] && [ ! -f \$metadata/rotated ]; then + echo "Warning: metadata does not exist for \$dir.1. This backup may be only partially completed. Skipping rotation." + continue 1 fi + + # Rotate the current list of backups, if we can. + oldest=\`find $backuproot -maxdepth 1 -type d -name \$rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1\` + [ "\$oldest" == "" ] && oldest=0 + for (( i=\$oldest; i > 0; i-- )); do + if [ -d \$dir.\$i ]; then + if [ -f \$metadata/created ]; then + created=\`tail -1 \$metadata/created\` + elif [ -f \$metadata/rotated ]; then + created=\`tail -1 \$metadata/rotated\` + else + created=0 + fi + cutoff_time=\$(( now - (seconds*(i-1)) )) + if [ ! \$created -gt \$cutoff_time ]; then + next=\$(( i + 1 )) + if [ ! -d \$dir.\$next ]; then + echo "Debug: \$rottype.\$i --> \$rottype.\$next" + $nice mv \$dir.\$i \$dir.\$next + mkdir -p $backuproot/metadata/\$rottype.\$next + date +%c%n%s > $backuproot/metadata/\$rottype.\$next/rotated + else + echo "Debug: skipping rotation of \$dir.\$i because \$dir.\$next already exists." + fi + else + echo "Debug: skipping rotation of \$dir.\$i because it was created" \$(( (now-created)/86400)) "days ago ("\$(( (now-cutoff_time)/86400))" needed)." + fi + fi + done + done + + max=\$((keepdaily+1)) + if [ \$keepweekly -gt 0 -a -d $backuproot/daily.\$max -a ! -d \$backuproot/weekly.1 ]; then + echo "Debug: daily.\$max --> weekly.1" + $nice mv $backuproot/daily.\$max $backuproot/weekly.1 + mkdir -p $backuproot/metadata/weekly.1 + date +%c%n%s > $backuproot/metadata/weekly.1/rotated + fi + + max=\$((keepweekly+1)) + if [ \$keepmonthly -gt 0 -a -d $backuproot/weekly.\$max -a ! -d $backuproot/monthly.1 ]; then + echo "Debug: weekly.\$max --> monthly.1" + $nice mv $backuproot/weekly.\$max $backuproot/monthly.1 + mkdir -p $backuproot/metadata/monthly.1 + date +%c%n%s > $backuproot/metadata/monthly.1/rotated + fi + + for rottype in daily weekly monthly; do + max=\$((keep\${rottype}+1)) + dir="$backuproot/\$rottype" + oldest=\`find $backuproot -maxdepth 1 -type d -name \$rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1\` + [ "\$oldest" == "" ] && oldest=0 + # if we've rotated the last backup off the stack, remove it. + for (( i=\$oldest; i >= \$max; i-- )); do + if [ -d \$dir.\$i ]; then + if [ -d $backuproot/rotate.tmp ]; then + echo "Debug: removing rotate.tmp" + $nice rm -rf $backuproot/rotate.tmp + fi + echo "Debug: moving \$rottype.\$i to rotate.tmp" + $nice mv \$dir.\$i $backuproot/rotate.tmp + fi + done done + ##### END REMOTE SCRIPT ####### +EOF +) | (while read a; do passthru $a; done) + +} + +function setup_long_dirs { + + local destdir=$1 + local backuptype=$2 + local dir="$destdir/$backuptype" + local tmpdir="$destdir/rotate.tmp" + local metadata="$destdir/metadata/$backuptype.1" + + if [ ! -d $destdir ]; then + echo "Creating destination directory $destdir..." + mkdir -p $destdir + fi + + if [ -d $dir.1 ]; then + if [ -f $metadata/created ]; then + echo "Warning: $dir.1 already exists. Overwriting contents." + else + echo "Warning: we seem to be resuming a partially written $dir.1" + fi + else + if [ -d $tmpdir ]; then + mv $tmpdir $dir.1 + if [ $? == 1 ]; then + echo "Fatal: could mv $destdir/rotate.tmp $dir.1 on host $host" + exit 1 + fi + else + mkdir --parents $dir.1 + if [ $? == 1 ]; then + echo "Fatal: could not create directory $dir.1 on host $host" + exit 1 + fi + fi + if [ -d $dir.2 ]; then + echo "Debug: update links $backuptype.2 --> $backuptype.1" + cp -alf $dir.2/. $dir.1 + #if [ $? == 1 ]; then + # echo "Fatal: could not create hard links to $dir.1 on host $host" + # exit 1 + #fi + fi + fi + [ -f $metadata/created ] && rm $metadata/created + [ -f $metadata/rotated ] && rm $metadata/rotated + +} + +function setup_long_dirs_remote { - if [ -d $1.tmp ]; then - $nice $mv /$1.tmp /$1.0 + local destdir=$1 + local backuptype=$2 + local dir="$destdir/$backuptype" + local tmpdir="$destdir/rotate.tmp" + local metadata="$destdir/metadata/$backuptype.1" + +( + $ssh_cmd <<EOF + ##### BEGIN REMOTE SCRIPT ##### + if [ ! -d $destdir ]; then + echo "Creating destination directory $destdir on $host..." + mkdir -p $destdir fi - if [ -d $1.1 ]; then - $nice $cp -alf /$1.1/. /$1.0 + if [ -d $dir.1 ]; then + if [ -f $metadata/created ]; then + echo "Warning: $dir.1 already exists. Overwriting contents." + else + echo "Warning: we seem to be resuming a partially written $dir.1" + fi + else + if [ -d $tmpdir ]; then + mv $tmpdir $dir.1 + if [ \$? == 1 ]; then + echo "Fatal: could mv $destdir/rotate.tmp $dir.1 on host $host" + exit 1 + fi + else + mkdir --parents $dir.1 + if [ \$? == 1 ]; then + echo "Fatal: could not create directory $dir.1 on host $host" + exit 1 + fi + fi + if [ -d $dir.2 ]; then + echo "Debug: update links $backuptype.2 --> $backuptype.1" + cp -alf $dir.2/. $dir.1 + #if [ \$? == 1 ]; then + # echo "Fatal: could not create hard links to $dir.1 on host $host" + # exit 1 + #fi + fi fi + [ -f $metadata/created ] && rm $metadata/created + [ -f $metadata/rotated ] && rm $metadata/rotated + ##### END REMOTE SCRIPT ####### +EOF +) | (while read a; do passthru $a; done) } function move_files { - ref=$tmp/makesnapshot-mymv-$$; - $touch -r $1 $ref; - $mv $1 $2; - $touch -r $ref $2; - $rm $ref; + ref=$tmp/makesnapshot-mymv-$$; + $touch -r $1 $ref; + $mv $1 $2; + $touch -r $ref $2; + $rm $ref; } -backupdir="$mountpoint/$backupdir" +function prepare_storage { -# does $backupdir exists? + section="`basename $SECTION`" -if [ ! -d "$backupdir" ]; then - error "Backupdir $backupdir does not exist" - exit 1 -fi + if [ "$format" == "short" ]; then -# setup number of increments + suffix="$section.0" + info "Rotating $backupdir/$SECTION..." + echo "Rotating $backupdir/$SECTION..." >> $log -if [ -z "$days" ]; then - keep="4" -else - keep="`echo $days - 1 | bc -l`" -fi + if [ "$dest" == "remote" ]; then + rotate_short_remote $backupdir/$SECTION/$section $keep + else + rotate_short $backupdir/$SECTION/$section $keep + if [ ! -d "$backupdir/$SECTION/$section.0" ]; then + mkdir -p $backupdir/$SECTION/$section.0 + fi + fi -# lockfile setup + elif [ "$format" == "long" ]; then -if [ ! -z "$lockfile" ]; then - $touch $lockfile || warning "Could not create lockfile $lockfile" -fi + if [ $keepdaily -gt 0 ]; then + btype=daily + elif [ $keepweekly -gt 0 ]; then + btype=weekly + elif [ $keepmonthly -gt 0 ]; then + btype=monthly + else + fatal "keeping no backups"; + exit 1 + fi -# nicelevel setup + suffix="$btype.1" + info "Rotating $backupdir/$SECTION/..." + echo "Rotating $backupdir/$SECTION/..." >> $log -if [ ! -z "$nicelevel" ]; then - nice="nice -n $nicelevel" -else - nice="" -fi + if [ "$dest" == "remote" ]; then + rotate_long_remote $backupdir/$SECTION + setup_long_dirs_remote $backupdir/$SECTION $btype + else + rotate_long $backupdir/$SECTION + setup_long_dirs $backupdir/$SECTION $btype + fi -# connection test + elif [ "$format" == "mirror" ]; then + suffix="" + else + fatal "Invalid backup format $format" + exit 1 + fi -if [ "$from" == "remote" ] && [ "$testconnect" == "yes" ]; then - debug "$ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'" - result=`ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'` - if [ "$result" != "1" ]; then - fatal "Can't connect to $host as $user." +} + +function set_orig { + + if [ "$from" == "local" ]; then + orig="/$SECTION/" + elif [ "$from" == "remote" ]; then + if [ "$protocol" == "rsync" ]; then + orig="rsync://$user@$host:$port/$SECTION/" + else + orig="$user@$host:/$SECTION/" + fi + fi + +} + +function set_dest { + + if [ "$dest" == "local" ]; then + dest_path="$backupdir/$SECTION/$suffix/" else - debug "Connected to $srchost successfully" + if [ "$protocol" == "rsync" ]; then + dest_path="rsync://$user@$host:$port/$backupdir/$SECTION/$suffix/" + else + dest_path="$user@$host:$backupdir/$SECTION/$suffix/" + fi fi -fi -# rsync options for local sources +} -if [ "$from" == "local" ]; then +function set_batch_mode { - rsync_local_options="$rsync_options" + local batch_file="$batchbase/$SECTION/$suffix" - if [ ! -z "$numericids" ]; then - rsync_local_options="$rsync_local_options --numeric-ids " + if [ "$batch" == "read" ]; then + if [ -e "$batch_file" ]; then + orig="" + excludes="" + batch_option="--read-batch=$batch_file" + else + fatal "Batch file not found: $batch_file" + exit 1 + fi + elif [ "$batch" == "write" ]; then + mkdir -p `dirname $batch_file` + batch_option="--write-batch=$batch_file" fi -fi +} -# rsync options for remote sources +function update_metadata { -if [ "$from" == "remote" ]; then + local metadata + local folder - rsync_remote_options="$rsync_options --rsync-path=$remote_rsync" + if [ "$dest" == "local" ]; then + metadata="`dirname $dest_path`/metadata/`basename $dest_path`" + mkdir -p $metadata + date +%c%n%s > $metadata/created + $touch $backupdir/$SECTION/$suffix + else + folder="`echo $dest_path | cut -d : -f 2`" + metadata="`dirname $folder`/metadata/`basename $folder`" + +( + $ssh_cmd <<EOF + ##### BEGIN REMOTE SCRIPT ##### + mkdir -p $metadata + date +%c%n%s > $metadata/created + ##### END REMOTE SCRIPT ####### +EOF +) | (while read a; do passthru $a; done) - if [ "$compress" == "1" ]; then - rsync_remote_options="$rsync_remote_options --compress" fi - if [ ! -z "$bandwidthlimit" ]; then - rsync_remote_options="$rsync_remote_options --bwlimit=$bandwidthlimit" +} + +function test_connect { + + local host="$1" + local port="$2" + local user="$3" + local id_file="$4" + + if [ -z "$host" ] || [ -z "$user" ]; then + fatal "Remote host or user not set" + exit 1 fi - if [ ! -z "$numericids" ]; then - rsync_remote_options="$rsync_remote_options --numeric-ids" + debug "$ssh_cmd 'echo -n 1'" + result=`$ssh_cmd 'echo -n 1'` + + if [ "$result" != "1" ]; then + fatal "Can't connect to $host as $user." + exit 1 + else + debug "Connected to $host successfully" fi -fi +} -# set mv procedure +function set_lockfile { -if [ $enable_mv_timestamp_bug == "yes" ]; then - mv=move_files -fi + if [ ! -z "$lockfile" ]; then + $touch $lockfile || warning "Could not create lockfile $lockfile" + fi -# set excludes +} -for path in $exclude; do - EXCLUDES="$EXCLUDES --exclude=$path" -done +function unset_lockfile { -# stop services + if [ ! -z "$lockfile" ]; then + $rm $lockfile || warning "Could not remove lockfile $lockfile" + fi -if [ ! -z "$service" ]; then - for daemon in $service; do - info "Stopping service $daemon..." - $initscripts/$daemon stop - done -fi +} -echo "Starting backup at `date`" >> $log +function set_filelist { -# mount backup destination folder as read-write + filelist_flag="" -if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then - if [ -d "$mountpoint" ]; then - mount -o remount,rw $mountpoint - if (($?)); then - error "Could not mount $mountpoint" - exit 1 + if [ "$filelist" == "yes" ]; then + if [ ! -z "$filelistbase" ]; then + if [ -e "$filelistbase/$SECTION/$suffix" ]; then + filelist_flag="--files-from=$filelistbase/$SECTION/$suffix" + else + warning "File list $filelistbase/$SECTION/$suffix not found." + fi + else + warning "No filelistbase set." fi fi -fi -# add vservers to included folders +} + +function set_rsync_options { + + if [ ! -z "$numericids" ]; then + rsync_options="$rsync_options --numeric-ids" + fi + + if [ "$from" == "local" ] || [ "$dest" == "local" ]; then + # rsync options for local sources or destinations + rsync_options="$rsync_options" + fi + + if [ "$from" == "remote" ] || [ "$dest" == "remote" ]; then + + # rsync options for remote sources or destinations + + if [ "$compress" == "1" ]; then + rsync_options="$rsync_options --compress" + fi -if [ "$vservers_are_available" == "yes" ]; then + if [ ! -z "$bandwidthlimit" ]; then + rsync_options="$rsync_options --bwlimit=$bandwidthlimit" + fi + + if [ "$fakesuper" == "yes" ]; then + remote_rsync="$remote_rsync --fake-super" + fi - # sane permission on backup - mkdir -p $backupdir/$VROOTDIR - chmod 000 $backupdir/$VROOTDIR + rsync_options=($rsync_options --rsync-path="$remote_rsync") - for candidate in $found_vservers; do - candidate="`basename $candidate`" - found_excluded_vserver="0" - for excluded_vserver in $exclude_vserver; do - if [ "$excluded_vserver" == "$candidate" ]; then - found_excluded_vserver="1" - break + if [ "$protocol" == "ssh" ]; then + if [ ! -e "$id_file" ]; then + fatal "SSH Identity file $id_file not found" + exit 1 + else + debug RSYNC_RSH=\"$ssh_cmd\" + echo RSYNC_RSH=\"$ssh_cmd\" >> $log + RSYNC_RSH="$ssh_cmd" fi - done - if [ "$found_excluded_vserver" == "0" ]; then - include="$include $VROOTDIR/$candidate" fi - done -fi -# the backup procedure + fi -for SECTION in $include; do + include_vservers - section="`basename $SECTION`" +} + +function stop_services { - if [ ! -d "$backupdir/$SECTION/$section.0" ]; then - mkdir -p $backupdir/$SECTION/$section.0 + if [ ! -z "$service" ]; then + for daemon in $service; do + info "Stopping service $daemon..." + $initscripts/$daemon stop + done fi - - info "Rotating $backupdir/$SECTION/$section..." - echo "Rotating $backupdir/$SECTION/$section..." >> $log - rotate $backupdir/$SECTION/$section $keep - info "Syncing $SECTION on $backupdir/$SECTION/$section.0..." - if [ "$from" == "local" ]; then - debug $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ - $nice $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ >> $log - if [ "$?" != "0" ]; then - warning "Rsync error when trying to transfer $SECTION" +} + +function start_services { + + # restart services + + if [ ! -z "$service" ]; then + for daemon in $service; do + info "Starting service $daemon..." + $initscripts/$daemon start + done + fi + +} + +function mount_rw { + + # mount backup destination folder as read-write + + if [ "$dest" == "local" ]; then + if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then + if [ -d "$mountpoint" ]; then + mount -o remount,rw $mountpoint + if (($?)); then + error "Could not mount $mountpoint" + exit 1 + fi + fi fi - elif [ "$from" == "remote" ]; then - if [ -z "$user" ] || [ -z "$host" ]; then - error "Config file error: either user or host was not specified" - exit 1 - else - debug $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 - $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 >> $log - if [ "$?" != "0" ]; then - warning "Rsync error when trying to transfer $SECTION" + fi + +} + +function mount_ro { + + # remount backup destination as read-only + + if [ "$dest" == "local" ]; then + if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then + mount -o remount,ro $mountpoint + fi + fi + +} + +function run_fsck { + + # check partition for errors + + if [ "$dest" == "local" ]; then + if [ "$fscheck" == "1" ] || [ "$fscheck" == "yes" ]; then + umount $mountpoint + if (($?)); then + warning "Could not umount $mountpoint to run fsck" + else + $nice $fsck -v -y $partition >> $log + mount $mountpoint fi fi - else - error "Invalid source $from" - exit 1 fi - $touch $backupdir/$SECTION/$section.0 +} -done +function include_vservers { -# remount backup destination as read-only + # add vservers to included folders -if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then - mount -o remount,ro $mountpoint -fi + if [ "$vservers_are_available" == "yes" ]; then -# check partition for errors + # sane permission on backup + mkdir -p $backupdir/$VROOTDIR + chmod 000 $backupdir/$VROOTDIR -if [ "$fscheck" == "1" ] || [ "$fscheck" == "yes" ]; then - umount $mountpoint - if (($?)); then - warning "Could not umount $mountpoint to run fsck" - else - $nice $fsck -v -y $partition >> $log - mount $mountpoint + for candidate in $found_vservers; do + candidate="`basename $candidate`" + found_excluded_vserver="0" + for excluded_vserver in $exclude_vserver; do + if [ "$excluded_vserver" == "$candidate" ]; then + found_excluded_vserver="1" + break + fi + done + if [ "$found_excluded_vserver" == "0" ]; then + include="$include $VROOTDIR/$candidate" + fi + done fi -fi -# restart services +} -if [ ! -z "$service" ]; then - for daemon in $service; do - info "Starting service $daemon..." - $initscripts/$daemon start - done -fi +function start_mux { + + if [ "$multiconnection" == "yes" ]; then + debug "Starting master ssh connection" + $ssh_cmd -M sleep 1d & + sleep 1 + fi + +} -# removes the lockfile +function end_mux { + + if [ "$multiconnection" == "yes" ]; then + debug "Stopping master ssh connection" + $ssh_cmd pkill sleep + fi + +} + +# the backup procedure + +eval_config +set_lockfile +set_rsync_options +start_mux +stop_services +mount_rw + +echo "Starting backup at `date`" >> $log + +for SECTION in $include; do + + prepare_storage + set_orig + set_batch_mode + set_filelist + set_dest + + info "Syncing $SECTION on $dest_path..." + debug $nice $rsync "${rsync_options[@]}" $filelist_flag $excludes $batch_option $orig $dest_path + $nice $rsync "${rsync_options[@]}" $filelist_flag $excludes $batch_option $orig $dest_path >> $log + + if [ "$?" != "0" ]; then + warning "Rsync error when trying to transfer $SECTION" + fi + + update_metadata + +done -if [ ! -z "$lockfile" ]; then - $rm $lockfile || warning "Could not remove lockfile $lockfile" -fi +mount_ro +run_fsck +start_services +unset_lockfile +end_mux echo "Finnishing backup at `date`" >> $log |