diff options
Diffstat (limited to 'handlers/sys')
| -rwxr-xr-x | handlers/sys | 498 |
1 files changed, 0 insertions, 498 deletions
diff --git a/handlers/sys b/handlers/sys deleted file mode 100755 index 2e181c8..0000000 --- a/handlers/sys +++ /dev/null @@ -1,498 +0,0 @@ -# -*- mode: sh; sh-basic-offset: 3; indent-tabs-mode: nil; -*- -# -# this handler will save various reports of vital system information. -# by default, all the reports are enabled and are saved in /var/backups. -# -# (1) a list of all the packages installed and removed. -# this file can be used to restore the state of installed packages -# by running "dpkg --set-selections < dpkg-selections.txt -# -# (2) the partition table of all disks. -# this partition table can be used to format another disk of -# the same size. this can be handy if using software raid and -# you have a disk go bad. just replace the disk and partition it -# by running "sfdisk /dev/sdb < partitions.sdb.txt" -# (MAKE SURE YOU PARTITION THE CORRECT DISK!!!) -# -# (3) hardware information. -# write to a text file the important things which hwinfo can gleen. -# - -if [ -f /etc/debian_version ] -then - os=debian - debug "Debian detected" - osversion="/etc/debian_version" -elif [ -f /etc/redhat-release ] -then - os=redhat - debug "Redhat detected" - osversion="/etc/redhat-release" -else - warning "Unknown OS detected!" -fi - -getconf packages yes -getconf dosfdisk yes -getconf dohwinfo yes -if [ $os = "debian" ] -then - getconf packagesfile /var/backups/dpkg-selections.txt - getconf packagemgr `which dpkg` - getconf packagemgroptions ' --get-selections *' -elif [ $os = "redhat" ] -then - getconf packagesfile /var/backups/rpmpackages.txt - getconf packagemgr `which rpm` - getconf packagemgroptions ' -qa ' - - getconf SYSREPORT `which sysreport` - getconf sysreport_options ' -norpm ' -else - getconf packagesfile /var/backups/unknownOS.txt -fi -packagemgroptions="${packagemgroptions//__star__/*}" - -getconf partitions yes -getconf partitionsfile /var/backups/partitions.__star__.txt - -getconf hardware yes -getconf hardwarefile /var/backups/hardware.txt - -getconf sysreport yes -getconf sysreportfile /var/backups/sysreport.txt - -getconf SFDISK `which sfdisk` -getconf HWINFO `which hwinfo` -getconf sfdisk_options "" -getconf hwinfo_options "" - -# See if vservers are configured -local usevserver=no -if [ $vservers_are_available = yes ] -then - info "vserver method enabled" - usevserver=yes -fi - -## PACKAGES ############################## - -# -# here we grab a list of the packages installed and removed. -# - -if [ "$packages" == "yes" ]; then - - if [ $usevserver = yes ]; then - info "vserver root directory set to: $VROOTDIR" - for vserver in $found_vservers; do - info "examining vserver: $vserver" - # is it running ? - $VSERVERINFO -q $vserver RUNNING - if [ $? -ne 0 ]; then - warning "The vserver $vserver is not running." - continue - fi - # is $packagemgr available inside $vserver ? - if [ ! -x "$VROOTDIR/$vserver`$VSERVER $vserver exec which $packagemgr`" ]; then - warning "can't find $packagemgr in vserver $vserver, skipping installed packages report." - continue - fi - # don't expand * since it can be used in $packagemgroptions - set -o noglob - debug "$VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile" - $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile" - set +o noglob - done - fi - - # We want to perform this on the host as well - if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then - warning "can't find ${packagemgr}, skipping installed packages report." - else - # don't expand * since it can be used in $packagemgroptions - set -o noglob - debug "$packagemgr $packagemgroptions > $packagesfile" - $packagemgr $packagemgroptions > $packagesfile || fatal "can not save $packagemgr info to $packagesfile" - set +o noglob - fi - -fi - -## System report ############################## - -# -# here we grab a bunch of system stuff for a report -# - -export STATUS - -HASHES="#################################################################" -DASHES="-----------------------------------------------------------------" - -cat /dev/null > $sysreportfile || fatal "can not write to $sysreportfile" - - -catiffile () { - echo $HASHES >> $sysreportfile - echo "# $STATUS" >> $sysreportfile - echo $HASHES >> $sysreportfile - if [ -f $1 ]; then - echo "file: $1" >> $sysreportfile - echo $DASHES >> $sysreportfile - cat $1 >> $sysreportfile 2>&1 || info "reading of $1 failed" - fi - if [ -d $1 ]; then - echo "directory: $1" >> $sysreportfile - echo $DASHES >> $sysreportfile - for file in `find $1 -maxdepth 3 -noleaf -type f` - do - catiffile $file - done - fi - echo $DASHES >> $sysreportfile -} - -catifexec () { - echo $HASHES >> $sysreportfile - echo "# $STATUS" >> $sysreportfile - echo $HASHES >> $sysreportfile - $1 >> $sysreportfile 2>&1 || info "executing of $1 failed" -} - - -STATUS="Determining $os version:" -catiffile $osversion - -STATUS="Determinding your current hostname: " -catifexec "/bin/hostname" - -STATUS="Getting the date:" -catifexec "/bin/date" - -STATUS="Checking your systems current uptime and load average:" -catifexec "/usr/bin/uptime" - -STATUS="Checking available memory:" -catifexec "/usr/bin/free" - -STATUS="Checking free disk space:" -catifexec "/bin/df" "-al" - -STATUS="Collecting what services run at what run level:" -if [ $os = "redhat" ]; then - catifexec "/sbin/chkconfig --list" - STATUS="Collecting information about /etc/rc.d:" - catiffile "/bin/ls /etc/rc.d/rc*.d/" - -elif [ $os = "debian" ]; then - for level in 0 1 2 3 4 5 6 S; do - echo "Level: $level" >> $sysreportfile - for f in /etc/rc${level}.d/*; do - # Remove /etc/Knn or Snn from beginning - ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__') - if [ $f != $ff ]; then - echo $ff >> $sysreportfile - fi - done - echo "" >> $sysreportfile - done -fi - -STATUS="Getting bootloader information:" -catifexec "/bin/ls -alR /boot" - -# This covers sparc, alpha, and intel (respectively) -# updated for grub -mpg -if [ -f /etc/silo.conf ]; then - STATUS="Collecting information about the boot process (silo):" - catiffile "/etc/silo.conf" -fi -if [ -f /etc/milo.conf ]; then - STATUS="Collecting information about the boot process (milo):" - catiffile "/etc/milo.conf" -fi -if [ -f /etc/lilo.conf ]; then - STATUS="Collecting information about the boot process (lilo):" - catiffile "/etc/lilo.conf" - catifexec "/sbin/lilo -q" -fi -if [ -d /boot/grub -a -f /boot/grub/grub.conf -a -f /boot/grub/device.map ]; then - STATUS="Collecting information about the boot process (grub.conf):" - catiffile "/boot/grub/grub.conf" - STATUS="Collecting information about the boot process (grub.map):" - catiffile "/boot/grub/device.map" -fi -if [ -f /etc/cluster.conf -o -f /etc/cluster.xml ] ; then - STATUS="Gathering information on cluster setup" - # 2.1 AS - if [ -f /etc/cluster.conf ] ; then - catiffile "/etc/cluster.conf" - fi - # Taroon - if [ -f /etc/cluster.xml ] ; then - catiffile "/etc/cluster.xml" - fi -fi - -STATUS="Gathering sysctl information (sysctl -a):" -catiffile "sysctl -a 2>/dev/null" -STATUS="Gathering sysctl information (/etc/sysctl.conf):" -catiffile "/etc/sysctl.conf" - -STATUS="Gathering IP information (/sbin/ifconfig):" -catifexec "/sbin/ifconfig -a" - -STATUS="Gathering additional IP information (/bin/ip addr list):" -catifexec "/bin/ip addr list" - -STATUS="Checking network routes:" -catifexec "/sbin/route -n" - -STATUS="Collecting Name Service Switch config information:" -catiffile "/etc/nsswitch.conf" - -STATUS="Collecting information about system authentication (pam):" -catiffile "/etc/pam.conf" -catiffile "/etc/pam.d" - -echo -echo "Getting information about the kernel." -echo -STATUS="Getting kernel version:" -catifexec "/bin/uname" "-a" -STATUS="Checking module information:" -catifexec "/sbin/lsmod" -for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null -) ; do - STATUS="Checking module information $x:" - catifexec "/sbin/modinfo $x" -done - -STATUS="Currently getting ksysms information:" -catifexec "/sbin/ksyms" - -STATUS="Gathering information about your filesystems:" -catiffile "/proc/filesystems" - -STATUS="Gathering information about your system stat:" -catiffile "/proc/stat" - -STATUS="Gathering information about your partitions:" -catiffile "/proc/partitions" - -STATUS="Gathering information about your ksyms:" -catiffile "/proc/ksyms" - -STATUS="Gathering information about slabinfo:" -catiffile "/proc/slabinfo" - -# Added support to cover for the new modules.conf layout in Red Hat 7 -STATUS="Collecting information regarding kernel modules" -VER=`uname -r` -catiffile "/lib/modules/$VER/modules.dep" -if [ -f /etc/conf.modules ]; then - STATUS="Collecting information regarding kernel modules (conf.modules)" - catiffile "/etc/conf.modules" -fi -if [ -f /etc/modules.conf ]; then - STATUS="Collecting information regarding kernel modules (modules.conf)" - catiffile "/etc/modules.conf" -fi -if [ -f /etc/modprobe.conf ]; then - STATUS="Collecting information regarding kernel modules (modeprobe.conf)" - catiffile "/etc/modprobe.conf" -fi - -# dkms status -if [ -x /usr/sbin/dkms ] ; then - STATUS="Gathering current status of modules, versions and kernels (dkms):" - catifexec "/usr/sbin/dkms" "status" -fi - -if [ -f /etc/sysconfig/isdncard ] ; then - STATUS="Gathering information about ISDN:" - catiffile "/etc/sysconfig/isdncard" -fi - -STATUS="Collecting information from the proc directory:" -catiffile "/proc/pci" - -STATUS="Getting kernel command line" -catiffile "/proc/cmdline" - -STATUS="Gathering information about your CPU:" -catiffile "/proc/cpuinfo" - -STATUS="Gathering information about your Ram:" -catiffile "/proc/meminfo" - -STATUS="Gathering information about your ioports:" -catiffile "/proc/ioports" - -STATUS="Gathering information about your interrupts:" -catiffile "/proc/interrupts" - -STATUS="Gathering information about your scsi devices:" -catiffile "/proc/scsi" - -STATUS="Gathering information about your dma:" -catiffile "/proc/dma" - -STATUS="Gathering information about your devices (/proc/devices):" -catiffile "/proc/devices" - -STATUS="Gathering information about your rtc:" -catiffile "/proc/rtc" - -STATUS="Gathering information about your ide drivers:" -catiffile "/proc/ide" - -STATUS="Gathering information about your bus:" -catifexec lspci -catiffile "/proc/bus" - -echo -echo "Getting disk and filesystem information." -echo - -STATUS="Collecting information from /etc/fstab:" -catiffile "/etc/fstab" - -STATUS="Collecting disk partition information:" -catifexec "fdisk -l" - -STATUS="Checking mounted file systems (mount) " -catifexec "/bin/mount" - -STATUS="Checking mounted file systems (/proc/mounts)" -catiffile "/proc/mounts" - -STATUS="Collecting Software RAID information (/proc/mdstat)" -catiffile "/proc/mdstat" - -STATUS="Collecting Software RAID information (/etc/raidtab)" -catiffile "/etc/raidtab" - -STATUS="Collecting Software RAID information (/etc/mdadm.conf)" -catiffile "/etc/mdadm.conf" - -STATUS="Collecting Automount information (auto.master)" -catiffile "/etc/auto.master" - -STATUS="Collecting Automount information (auto.misc)" -catiffile "/etc/auto.misc" - -STATUS="Collecting Automount information (auto.net)" -catiffile "/etc/auto.net" - -STATUS="Collecting LVM information:" -if [ $os = "redhat" ]; then - catifexec "/usr/sbin/vgdisplay" "-vv" -elif [ $os = "debian" ]; then - catifexec "/sbin/vgdisplay" "-vv" -fi - -STATUS="Collecting SCSI Tape information (/etc/stinit.def)" -catiffile "/etc/stinit.def" - -if [ -x /sbin/lsusb ] ; then - STATUS="Collecting USB devices list (lsusb):" - catifexec "/sbin/lsusb" -fi - -if [ -x /usr/bin/lshal ] ; then - STATUS="Collecting global devices list (lshal):" - catifexec "/usr/bin/lshal" -fi - - -STATUS="Gathering information on SELinux setup" -catifexec "/usr/bin/selinuxconfig" -catifexec "/usr/sbin/sestatus" -if [ $os = "redhat" ]; then - catifexec "rpm" "-q -V selinux-policy-targeted" - catifexec "rpm" "-q -V selinux-policy-strict" -fi - -if [ $usevserver = yes ]; then - STATUS="Gathering vserver information" - catiffile "/proc/virtual" -fi - -if [ "$partitions" == "yes" ]; then - if [ "$dosfdisk" == "yes" ]; then - if [ ! -x "$SFDISK" ]; then - warning "can't find sfdisk, skipping sfdisk report." - partitions="no" - fi - fi - if [ "$dohwinfo" == "yes" ]; then - if [ ! -x "$HWINFO" ]; then - warning "can't find hwinfo, skipping partition report." - partitions="no" - fi - fi -fi - -if [ "$hardware" == "yes" ]; then - if [ ! -x "$HWINFO" ]; then - warning "can't find hwinfo, skipping hardware report." - hardware="no" - fi -fi - -## HARDWARE ############################# - -# -# here we use hwinfo to dump a table listing all the -# information we can find on the hardware of this machine -# - -if [ "$hardware" == "yes" ]; then - if [ "dohwinfo" == "yes" ]; then - if [ -f $hardwarefile ]; then - rm $hardwarefile - fi - touch $hardwarefile - echo -e "\n\n====================== summary ======================\n" >> $hardwarefile - debug "$HWINFO --short --cpu --network --disk --pci >> $hardwarefile" - $HWINFO --short --cpu --network --disk --pci >> $hardwarefile - for flag in cpu network bios pci; do - echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile - $HWINFO --$flag >> $hardwarefile - done - fi -fi - - -## PARTITIONS ############################# - -# here we use sfdisk to dump a listing of all the partitions. -# these files can be used to directly partition a disk of the same size. - -if [ "$partitions" == "yes" ]; then - if [ "$dosfdisk" == "yes" ]; then - devices=`LC_ALL=C $SFDISK -l 2>/dev/null | grep "^Disk /dev" | @AWK@ '{print $2}' | cut -d: -f1` - if [ "$devices" == "" ]; then - warning "No harddisks found" - fi - for dev in $devices; do - debug "$SFDISK will try to backup partition tables for device $dev" - [ -b $dev ] || continue - label=${dev#/dev/} - label=${label//\//-} - outputfile=${partitionsfile//__star__/$label} - debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null" - $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null - if [ $? -ne 0 ]; then - warning "The partition table for $dev could not be saved." - fi - done - fi - if [ "$dohwinfo" == "yes" ]; then - debug "Using $HWINFO to get all available disk information" - echo -e "\n\n====================== $disk ======================\n" >> $hardwarefile - $HWINFO --disk >> $hardwarefile - fi -fi |