aboutsummaryrefslogtreecommitdiff
path: root/handlers/sys.in
diff options
context:
space:
mode:
Diffstat (limited to 'handlers/sys.in')
-rwxr-xr-xhandlers/sys.in498
1 files changed, 498 insertions, 0 deletions
diff --git a/handlers/sys.in b/handlers/sys.in
new file mode 100755
index 0000000..2e181c8
--- /dev/null
+++ b/handlers/sys.in
@@ -0,0 +1,498 @@
+# -*- mode: sh; sh-basic-offset: 3; indent-tabs-mode: nil; -*-
+#
+# this handler will save various reports of vital system information.
+# by default, all the reports are enabled and are saved in /var/backups.
+#
+# (1) a list of all the packages installed and removed.
+# this file can be used to restore the state of installed packages
+# by running "dpkg --set-selections < dpkg-selections.txt
+#
+# (2) the partition table of all disks.
+# this partition table can be used to format another disk of
+# the same size. this can be handy if using software raid and
+# you have a disk go bad. just replace the disk and partition it
+# by running "sfdisk /dev/sdb < partitions.sdb.txt"
+# (MAKE SURE YOU PARTITION THE CORRECT DISK!!!)
+#
+# (3) hardware information.
+# write to a text file the important things which hwinfo can gleen.
+#
+
+if [ -f /etc/debian_version ]
+then
+ os=debian
+ debug "Debian detected"
+ osversion="/etc/debian_version"
+elif [ -f /etc/redhat-release ]
+then
+ os=redhat
+ debug "Redhat detected"
+ osversion="/etc/redhat-release"
+else
+ warning "Unknown OS detected!"
+fi
+
+getconf packages yes
+getconf dosfdisk yes
+getconf dohwinfo yes
+if [ $os = "debian" ]
+then
+ getconf packagesfile /var/backups/dpkg-selections.txt
+ getconf packagemgr `which dpkg`
+ getconf packagemgroptions ' --get-selections *'
+elif [ $os = "redhat" ]
+then
+ getconf packagesfile /var/backups/rpmpackages.txt
+ getconf packagemgr `which rpm`
+ getconf packagemgroptions ' -qa '
+
+ getconf SYSREPORT `which sysreport`
+ getconf sysreport_options ' -norpm '
+else
+ getconf packagesfile /var/backups/unknownOS.txt
+fi
+packagemgroptions="${packagemgroptions//__star__/*}"
+
+getconf partitions yes
+getconf partitionsfile /var/backups/partitions.__star__.txt
+
+getconf hardware yes
+getconf hardwarefile /var/backups/hardware.txt
+
+getconf sysreport yes
+getconf sysreportfile /var/backups/sysreport.txt
+
+getconf SFDISK `which sfdisk`
+getconf HWINFO `which hwinfo`
+getconf sfdisk_options ""
+getconf hwinfo_options ""
+
+# See if vservers are configured
+local usevserver=no
+if [ $vservers_are_available = yes ]
+then
+ info "vserver method enabled"
+ usevserver=yes
+fi
+
+## PACKAGES ##############################
+
+#
+# here we grab a list of the packages installed and removed.
+#
+
+if [ "$packages" == "yes" ]; then
+
+ if [ $usevserver = yes ]; then
+ info "vserver root directory set to: $VROOTDIR"
+ for vserver in $found_vservers; do
+ info "examining vserver: $vserver"
+ # is it running ?
+ $VSERVERINFO -q $vserver RUNNING
+ if [ $? -ne 0 ]; then
+ warning "The vserver $vserver is not running."
+ continue
+ fi
+ # is $packagemgr available inside $vserver ?
+ if [ ! -x "$VROOTDIR/$vserver`$VSERVER $vserver exec which $packagemgr`" ]; then
+ warning "can't find $packagemgr in vserver $vserver, skipping installed packages report."
+ continue
+ fi
+ # don't expand * since it can be used in $packagemgroptions
+ set -o noglob
+ debug "$VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile"
+ $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile"
+ set +o noglob
+ done
+ fi
+
+ # We want to perform this on the host as well
+ if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then
+ warning "can't find ${packagemgr}, skipping installed packages report."
+ else
+ # don't expand * since it can be used in $packagemgroptions
+ set -o noglob
+ debug "$packagemgr $packagemgroptions > $packagesfile"
+ $packagemgr $packagemgroptions > $packagesfile || fatal "can not save $packagemgr info to $packagesfile"
+ set +o noglob
+ fi
+
+fi
+
+## System report ##############################
+
+#
+# here we grab a bunch of system stuff for a report
+#
+
+export STATUS
+
+HASHES="#################################################################"
+DASHES="-----------------------------------------------------------------"
+
+cat /dev/null > $sysreportfile || fatal "can not write to $sysreportfile"
+
+
+catiffile () {
+ echo $HASHES >> $sysreportfile
+ echo "# $STATUS" >> $sysreportfile
+ echo $HASHES >> $sysreportfile
+ if [ -f $1 ]; then
+ echo "file: $1" >> $sysreportfile
+ echo $DASHES >> $sysreportfile
+ cat $1 >> $sysreportfile 2>&1 || info "reading of $1 failed"
+ fi
+ if [ -d $1 ]; then
+ echo "directory: $1" >> $sysreportfile
+ echo $DASHES >> $sysreportfile
+ for file in `find $1 -maxdepth 3 -noleaf -type f`
+ do
+ catiffile $file
+ done
+ fi
+ echo $DASHES >> $sysreportfile
+}
+
+catifexec () {
+ echo $HASHES >> $sysreportfile
+ echo "# $STATUS" >> $sysreportfile
+ echo $HASHES >> $sysreportfile
+ $1 >> $sysreportfile 2>&1 || info "executing of $1 failed"
+}
+
+
+STATUS="Determining $os version:"
+catiffile $osversion
+
+STATUS="Determinding your current hostname: "
+catifexec "/bin/hostname"
+
+STATUS="Getting the date:"
+catifexec "/bin/date"
+
+STATUS="Checking your systems current uptime and load average:"
+catifexec "/usr/bin/uptime"
+
+STATUS="Checking available memory:"
+catifexec "/usr/bin/free"
+
+STATUS="Checking free disk space:"
+catifexec "/bin/df" "-al"
+
+STATUS="Collecting what services run at what run level:"
+if [ $os = "redhat" ]; then
+ catifexec "/sbin/chkconfig --list"
+ STATUS="Collecting information about /etc/rc.d:"
+ catiffile "/bin/ls /etc/rc.d/rc*.d/"
+
+elif [ $os = "debian" ]; then
+ for level in 0 1 2 3 4 5 6 S; do
+ echo "Level: $level" >> $sysreportfile
+ for f in /etc/rc${level}.d/*; do
+ # Remove /etc/Knn or Snn from beginning
+ ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__')
+ if [ $f != $ff ]; then
+ echo $ff >> $sysreportfile
+ fi
+ done
+ echo "" >> $sysreportfile
+ done
+fi
+
+STATUS="Getting bootloader information:"
+catifexec "/bin/ls -alR /boot"
+
+# This covers sparc, alpha, and intel (respectively)
+# updated for grub -mpg
+if [ -f /etc/silo.conf ]; then
+ STATUS="Collecting information about the boot process (silo):"
+ catiffile "/etc/silo.conf"
+fi
+if [ -f /etc/milo.conf ]; then
+ STATUS="Collecting information about the boot process (milo):"
+ catiffile "/etc/milo.conf"
+fi
+if [ -f /etc/lilo.conf ]; then
+ STATUS="Collecting information about the boot process (lilo):"
+ catiffile "/etc/lilo.conf"
+ catifexec "/sbin/lilo -q"
+fi
+if [ -d /boot/grub -a -f /boot/grub/grub.conf -a -f /boot/grub/device.map ]; then
+ STATUS="Collecting information about the boot process (grub.conf):"
+ catiffile "/boot/grub/grub.conf"
+ STATUS="Collecting information about the boot process (grub.map):"
+ catiffile "/boot/grub/device.map"
+fi
+if [ -f /etc/cluster.conf -o -f /etc/cluster.xml ] ; then
+ STATUS="Gathering information on cluster setup"
+ # 2.1 AS
+ if [ -f /etc/cluster.conf ] ; then
+ catiffile "/etc/cluster.conf"
+ fi
+ # Taroon
+ if [ -f /etc/cluster.xml ] ; then
+ catiffile "/etc/cluster.xml"
+ fi
+fi
+
+STATUS="Gathering sysctl information (sysctl -a):"
+catiffile "sysctl -a 2>/dev/null"
+STATUS="Gathering sysctl information (/etc/sysctl.conf):"
+catiffile "/etc/sysctl.conf"
+
+STATUS="Gathering IP information (/sbin/ifconfig):"
+catifexec "/sbin/ifconfig -a"
+
+STATUS="Gathering additional IP information (/bin/ip addr list):"
+catifexec "/bin/ip addr list"
+
+STATUS="Checking network routes:"
+catifexec "/sbin/route -n"
+
+STATUS="Collecting Name Service Switch config information:"
+catiffile "/etc/nsswitch.conf"
+
+STATUS="Collecting information about system authentication (pam):"
+catiffile "/etc/pam.conf"
+catiffile "/etc/pam.d"
+
+echo
+echo "Getting information about the kernel."
+echo
+STATUS="Getting kernel version:"
+catifexec "/bin/uname" "-a"
+STATUS="Checking module information:"
+catifexec "/sbin/lsmod"
+for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null
+) ; do
+ STATUS="Checking module information $x:"
+ catifexec "/sbin/modinfo $x"
+done
+
+STATUS="Currently getting ksysms information:"
+catifexec "/sbin/ksyms"
+
+STATUS="Gathering information about your filesystems:"
+catiffile "/proc/filesystems"
+
+STATUS="Gathering information about your system stat:"
+catiffile "/proc/stat"
+
+STATUS="Gathering information about your partitions:"
+catiffile "/proc/partitions"
+
+STATUS="Gathering information about your ksyms:"
+catiffile "/proc/ksyms"
+
+STATUS="Gathering information about slabinfo:"
+catiffile "/proc/slabinfo"
+
+# Added support to cover for the new modules.conf layout in Red Hat 7
+STATUS="Collecting information regarding kernel modules"
+VER=`uname -r`
+catiffile "/lib/modules/$VER/modules.dep"
+if [ -f /etc/conf.modules ]; then
+ STATUS="Collecting information regarding kernel modules (conf.modules)"
+ catiffile "/etc/conf.modules"
+fi
+if [ -f /etc/modules.conf ]; then
+ STATUS="Collecting information regarding kernel modules (modules.conf)"
+ catiffile "/etc/modules.conf"
+fi
+if [ -f /etc/modprobe.conf ]; then
+ STATUS="Collecting information regarding kernel modules (modeprobe.conf)"
+ catiffile "/etc/modprobe.conf"
+fi
+
+# dkms status
+if [ -x /usr/sbin/dkms ] ; then
+ STATUS="Gathering current status of modules, versions and kernels (dkms):"
+ catifexec "/usr/sbin/dkms" "status"
+fi
+
+if [ -f /etc/sysconfig/isdncard ] ; then
+ STATUS="Gathering information about ISDN:"
+ catiffile "/etc/sysconfig/isdncard"
+fi
+
+STATUS="Collecting information from the proc directory:"
+catiffile "/proc/pci"
+
+STATUS="Getting kernel command line"
+catiffile "/proc/cmdline"
+
+STATUS="Gathering information about your CPU:"
+catiffile "/proc/cpuinfo"
+
+STATUS="Gathering information about your Ram:"
+catiffile "/proc/meminfo"
+
+STATUS="Gathering information about your ioports:"
+catiffile "/proc/ioports"
+
+STATUS="Gathering information about your interrupts:"
+catiffile "/proc/interrupts"
+
+STATUS="Gathering information about your scsi devices:"
+catiffile "/proc/scsi"
+
+STATUS="Gathering information about your dma:"
+catiffile "/proc/dma"
+
+STATUS="Gathering information about your devices (/proc/devices):"
+catiffile "/proc/devices"
+
+STATUS="Gathering information about your rtc:"
+catiffile "/proc/rtc"
+
+STATUS="Gathering information about your ide drivers:"
+catiffile "/proc/ide"
+
+STATUS="Gathering information about your bus:"
+catifexec lspci
+catiffile "/proc/bus"
+
+echo
+echo "Getting disk and filesystem information."
+echo
+
+STATUS="Collecting information from /etc/fstab:"
+catiffile "/etc/fstab"
+
+STATUS="Collecting disk partition information:"
+catifexec "fdisk -l"
+
+STATUS="Checking mounted file systems (mount) "
+catifexec "/bin/mount"
+
+STATUS="Checking mounted file systems (/proc/mounts)"
+catiffile "/proc/mounts"
+
+STATUS="Collecting Software RAID information (/proc/mdstat)"
+catiffile "/proc/mdstat"
+
+STATUS="Collecting Software RAID information (/etc/raidtab)"
+catiffile "/etc/raidtab"
+
+STATUS="Collecting Software RAID information (/etc/mdadm.conf)"
+catiffile "/etc/mdadm.conf"
+
+STATUS="Collecting Automount information (auto.master)"
+catiffile "/etc/auto.master"
+
+STATUS="Collecting Automount information (auto.misc)"
+catiffile "/etc/auto.misc"
+
+STATUS="Collecting Automount information (auto.net)"
+catiffile "/etc/auto.net"
+
+STATUS="Collecting LVM information:"
+if [ $os = "redhat" ]; then
+ catifexec "/usr/sbin/vgdisplay" "-vv"
+elif [ $os = "debian" ]; then
+ catifexec "/sbin/vgdisplay" "-vv"
+fi
+
+STATUS="Collecting SCSI Tape information (/etc/stinit.def)"
+catiffile "/etc/stinit.def"
+
+if [ -x /sbin/lsusb ] ; then
+ STATUS="Collecting USB devices list (lsusb):"
+ catifexec "/sbin/lsusb"
+fi
+
+if [ -x /usr/bin/lshal ] ; then
+ STATUS="Collecting global devices list (lshal):"
+ catifexec "/usr/bin/lshal"
+fi
+
+
+STATUS="Gathering information on SELinux setup"
+catifexec "/usr/bin/selinuxconfig"
+catifexec "/usr/sbin/sestatus"
+if [ $os = "redhat" ]; then
+ catifexec "rpm" "-q -V selinux-policy-targeted"
+ catifexec "rpm" "-q -V selinux-policy-strict"
+fi
+
+if [ $usevserver = yes ]; then
+ STATUS="Gathering vserver information"
+ catiffile "/proc/virtual"
+fi
+
+if [ "$partitions" == "yes" ]; then
+ if [ "$dosfdisk" == "yes" ]; then
+ if [ ! -x "$SFDISK" ]; then
+ warning "can't find sfdisk, skipping sfdisk report."
+ partitions="no"
+ fi
+ fi
+ if [ "$dohwinfo" == "yes" ]; then
+ if [ ! -x "$HWINFO" ]; then
+ warning "can't find hwinfo, skipping partition report."
+ partitions="no"
+ fi
+ fi
+fi
+
+if [ "$hardware" == "yes" ]; then
+ if [ ! -x "$HWINFO" ]; then
+ warning "can't find hwinfo, skipping hardware report."
+ hardware="no"
+ fi
+fi
+
+## HARDWARE #############################
+
+#
+# here we use hwinfo to dump a table listing all the
+# information we can find on the hardware of this machine
+#
+
+if [ "$hardware" == "yes" ]; then
+ if [ "dohwinfo" == "yes" ]; then
+ if [ -f $hardwarefile ]; then
+ rm $hardwarefile
+ fi
+ touch $hardwarefile
+ echo -e "\n\n====================== summary ======================\n" >> $hardwarefile
+ debug "$HWINFO --short --cpu --network --disk --pci >> $hardwarefile"
+ $HWINFO --short --cpu --network --disk --pci >> $hardwarefile
+ for flag in cpu network bios pci; do
+ echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile
+ $HWINFO --$flag >> $hardwarefile
+ done
+ fi
+fi
+
+
+## PARTITIONS #############################
+
+# here we use sfdisk to dump a listing of all the partitions.
+# these files can be used to directly partition a disk of the same size.
+
+if [ "$partitions" == "yes" ]; then
+ if [ "$dosfdisk" == "yes" ]; then
+ devices=`LC_ALL=C $SFDISK -l 2>/dev/null | grep "^Disk /dev" | @AWK@ '{print $2}' | cut -d: -f1`
+ if [ "$devices" == "" ]; then
+ warning "No harddisks found"
+ fi
+ for dev in $devices; do
+ debug "$SFDISK will try to backup partition tables for device $dev"
+ [ -b $dev ] || continue
+ label=${dev#/dev/}
+ label=${label//\//-}
+ outputfile=${partitionsfile//__star__/$label}
+ debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null"
+ $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null
+ if [ $? -ne 0 ]; then
+ warning "The partition table for $dev could not be saved."
+ fi
+ done
+ fi
+ if [ "$dohwinfo" == "yes" ]; then
+ debug "Using $HWINFO to get all available disk information"
+ echo -e "\n\n====================== $disk ======================\n" >> $hardwarefile
+ $HWINFO --disk >> $hardwarefile
+ fi
+fi