diff options
Diffstat (limited to 'handlers/sys.in')
| -rwxr-xr-x | handlers/sys.in | 194 |
1 files changed, 97 insertions, 97 deletions
diff --git a/handlers/sys.in b/handlers/sys.in index e6cb273..2ab5871 100755 --- a/handlers/sys.in +++ b/handlers/sys.in @@ -11,17 +11,17 @@ # (2) a list of all the packages installed and removed. # this file can be used to restore the state of installed packages # by running "dpkg --set-selections < dpkg-selections.txt and -# then run "apt-get -u dselect-upgrade". If you have the +# then run "apt-get -u dselect-upgrade". If you have the # debconf-set-selections file from (1), you should restore those first. -# -# (3) the partition table of all disks. +# +# (3) the partition table of all disks. # this partition table can be used to format another disk of -# the same size. this can be handy if using software raid and +# the same size. this can be handy if using software raid and # you have a disk go bad. just replace the disk and partition it # by running "sfdisk /dev/sdb < partitions.sdb.txt" # (MAKE SURE YOU PARTITION THE CORRECT DISK!!!) # -# (4) hardware information. +# (4) hardware information. # write to a text file the important things which hwinfo can gleen. # # (5) the Luks header of every Luks block device, if option luksheaders @@ -55,7 +55,7 @@ getconf dohwinfo yes if [ ! -d $parentdir ]; then mkdir -p $parentdir fi - + if [ $os = "debian" ] then getconf packagesfile $parentdir/dpkg-selections.txt @@ -65,9 +65,9 @@ then getconf debconfgetselections `which debconf-get-selections` elif [ $os = "redhat" ] then - getconf packagesfile $parentdir/rpmpackages.txt - getconf packagemgr `which rpm` - getconf packagemgroptions ' -qa ' + getconf packagesfile $parentdir/rpmpackages.txt + getconf packagemgr `which rpm` + getconf packagemgroptions ' -qa ' getconf SYSREPORT `which sysreport` getconf sysreport_options ' -norpm ' @@ -163,7 +163,7 @@ if [ "$packages" == "yes" ]; then # don't expand * since it can be used in $packagemgroptions set -o noglob debug "$VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile" - $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile" + $VSERVER $vserver exec $packagemgr $packagemgroptions > $VROOTDIR/$vserver$packagesfile || fatal "can not save $packagemgr info to $packagesfile" set +o noglob fi # is $debconfgetselections available inside $vserver ? @@ -184,9 +184,9 @@ if [ "$packages" == "yes" ]; then unset found done fi - + # We want to perform this on the host as well - if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then + if [ -z "$packagemgr" -o ! -x "$packagemgr" ]; then warning "can't find ${packagemgr}, skipping installed packages report." else # don't expand * since it can be used in $packagemgroptions @@ -235,7 +235,7 @@ catiffile () { done fi echo $DASHES >> $sysreportfile -} +} catifexec () { if [ -x $1 ]; then @@ -245,12 +245,12 @@ catifexec () { $* >> $sysreportfile 2>&1 || info "executing of $1 failed" fi } - + STATUS="Determining $os version:" catiffile $osversion -STATUS="Determinding your current hostname: " +STATUS="Determinding your current hostname: " catifexec "/bin/hostname" STATUS="Getting the date:" @@ -272,17 +272,17 @@ if [ $os = "redhat" ]; then catiffile "/bin/ls /etc/rc.d/rc*.d/" elif [ $os = "debian" ]; then - for level in 0 1 2 3 4 5 6 S; do - echo "Level: $level" >> $sysreportfile - for f in /etc/rc${level}.d/*; do - # Remove /etc/Knn or Snn from beginning - ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__') - if [ $f != $ff ]; then - echo $ff >> $sysreportfile - fi - done - echo "" >> $sysreportfile - done + for level in 0 1 2 3 4 5 6 S; do + echo "Level: $level" >> $sysreportfile + for f in /etc/rc${level}.d/*; do + # Remove /etc/Knn or Snn from beginning + ff=$(echo $f | @SED@ 's_/etc/rc..d/[KS][0-9][0-9]__') + if [ $f != $ff ]; then + echo $ff >> $sysreportfile + fi + done + echo "" >> $sysreportfile + done fi STATUS="Getting bootloader information:" @@ -291,34 +291,34 @@ catifexec "/bin/ls" "-alR /boot" # This covers sparc, alpha, and intel (respectively) # updated for grub -mpg if [ -f /etc/silo.conf ]; then - STATUS="Collecting information about the boot process (silo):" - catiffile "/etc/silo.conf" + STATUS="Collecting information about the boot process (silo):" + catiffile "/etc/silo.conf" fi if [ -f /etc/milo.conf ]; then - STATUS="Collecting information about the boot process (milo):" - catiffile "/etc/milo.conf" + STATUS="Collecting information about the boot process (milo):" + catiffile "/etc/milo.conf" fi if [ -f /etc/lilo.conf ]; then - STATUS="Collecting information about the boot process (lilo):" - catiffile "/etc/lilo.conf" - catifexec "/sbin/lilo" "-q" + STATUS="Collecting information about the boot process (lilo):" + catiffile "/etc/lilo.conf" + catifexec "/sbin/lilo" "-q" fi if [ -d /boot/grub -a -f /boot/grub/grub.conf -a -f /boot/grub/device.map ]; then - STATUS="Collecting information about the boot process (grub.conf):" - catiffile "/boot/grub/grub.conf" - STATUS="Collecting information about the boot process (grub.map):" - catiffile "/boot/grub/device.map" + STATUS="Collecting information about the boot process (grub.conf):" + catiffile "/boot/grub/grub.conf" + STATUS="Collecting information about the boot process (grub.map):" + catiffile "/boot/grub/device.map" fi if [ -f /etc/cluster.conf -o -f /etc/cluster.xml ] ; then - STATUS="Gathering information on cluster setup" - # 2.1 AS - if [ -f /etc/cluster.conf ] ; then - catiffile "/etc/cluster.conf" - fi - # Taroon - if [ -f /etc/cluster.xml ] ; then - catiffile "/etc/cluster.xml" - fi + STATUS="Gathering information on cluster setup" + # 2.1 AS + if [ -f /etc/cluster.conf ] ; then + catiffile "/etc/cluster.conf" + fi + # Taroon + if [ -f /etc/cluster.xml ] ; then + catiffile "/etc/cluster.xml" + fi fi STATUS="Gathering sysctl information (sysctl -a):" @@ -349,10 +349,10 @@ STATUS="Getting kernel version:" catifexec "/bin/uname" "-a" STATUS="Checking module information:" catifexec "/sbin/lsmod" -for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null +for x in $(/sbin/lsmod | /bin/cut -f1 -d" " 2>/dev/null | /bin/grep -v Module 2>/dev/null ) ; do - STATUS="Checking module information $x:" - catifexec "/sbin/modinfo" "$x" + STATUS="Checking module information $x:" + catifexec "/sbin/modinfo" "$x" done STATUS="Gathering information about your filesystems:" @@ -375,27 +375,27 @@ STATUS="Collecting information regarding kernel modules" VER=`uname -r` catiffile "/lib/modules/$VER/modules.dep" if [ -f /etc/conf.modules ]; then - STATUS="Collecting information regarding kernel modules (conf.modules)" - catiffile "/etc/conf.modules" + STATUS="Collecting information regarding kernel modules (conf.modules)" + catiffile "/etc/conf.modules" fi if [ -f /etc/modules.conf ]; then - STATUS="Collecting information regarding kernel modules (modules.conf)" - catiffile "/etc/modules.conf" + STATUS="Collecting information regarding kernel modules (modules.conf)" + catiffile "/etc/modules.conf" fi if [ -f /etc/modprobe.conf ]; then - STATUS="Collecting information regarding kernel modules (modeprobe.conf)" - catiffile "/etc/modprobe.conf" + STATUS="Collecting information regarding kernel modules (modeprobe.conf)" + catiffile "/etc/modprobe.conf" fi # dkms status if [ -x /usr/sbin/dkms ] ; then STATUS="Gathering current status of modules, versions and kernels (dkms):" - catifexec "/usr/sbin/dkms" "status" + catifexec "/usr/sbin/dkms" "status" fi if [ -f /etc/sysconfig/isdncard ] ; then - STATUS="Gathering information about ISDN:" - catiffile "/etc/sysconfig/isdncard" + STATUS="Gathering information about ISDN:" + catiffile "/etc/sysconfig/isdncard" fi STATUS="Collecting information from the proc directory:" @@ -481,18 +481,18 @@ fi STATUS="Collecting device-mapper (dm) information:" catifexec '/sbin/dmsetup' 'info' - + STATUS="Collecting SCSI Tape information (/etc/stinit.def)" catiffile "/etc/stinit.def" if [ -x /sbin/lsusb ] ; then - STATUS="Collecting USB devices list (lsusb):" - catifexec "/sbin/lsusb" + STATUS="Collecting USB devices list (lsusb):" + catifexec "/sbin/lsusb" fi if [ -x /usr/bin/lshal ] ; then - STATUS="Collecting global devices list (lshal):" - catifexec "/usr/bin/lshal" + STATUS="Collecting global devices list (lshal):" + catifexec "/usr/bin/lshal" fi @@ -511,24 +511,24 @@ fi if [ "$partitions" == "yes" ]; then if [ "$dosfdisk" == "yes" ]; then - if [ ! -x "$SFDISK" ]; then - warning "can't find sfdisk, skipping sfdisk report." - partitions="no" - fi + if [ ! -x "$SFDISK" ]; then + warning "can't find sfdisk, skipping sfdisk report." + partitions="no" + fi fi if [ "$dohwinfo" == "yes" ]; then - if [ ! -x "$HWINFO" ]; then - warning "can't find hwinfo, skipping partition report." - partitions="no" - fi + if [ ! -x "$HWINFO" ]; then + warning "can't find hwinfo, skipping partition report." + partitions="no" + fi fi fi if [ "$hardware" == "yes" ]; then - if [ ! -x "$HWINFO" ]; then - warning "can't find hwinfo, skipping hardware report." - hardware="no" - fi + if [ ! -x "$HWINFO" ]; then + warning "can't find hwinfo, skipping hardware report." + hardware="no" + fi fi ## HARDWARE ############################# @@ -536,47 +536,47 @@ fi # # here we use hwinfo to dump a table listing all the # information we can find on the hardware of this machine -# +# if [ "$hardware" == "yes" ]; then if [ "dohwinfo" == "yes" ]; then if [ -f $hardwarefile ]; then - rm $hardwarefile + rm $hardwarefile fi touch $hardwarefile echo -e "\n\n====================== summary ======================\n" >> $hardwarefile debug "$HWINFO --short --cpu --network --disk --pci >> $hardwarefile" $HWINFO --short --cpu --network --disk --pci >> $hardwarefile for flag in cpu network bios pci; do - echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile - $HWINFO --$flag >> $hardwarefile + echo -e "\n\n====================== $flag ======================\n" >> $hardwarefile + $HWINFO --$flag >> $hardwarefile done fi fi ## PARTITIONS ############################# -# here we use sfdisk to dump a listing of all the partitions. +# here we use sfdisk to dump a listing of all the partitions. # these files can be used to directly partition a disk of the same size. if [ "$partitions" == "yes" ]; then if [ "$dosfdisk" == "yes" ]; then devices=`LC_ALL=C $SFDISK -l 2>/dev/null | grep "^Disk /dev" | @AWK@ '{print $2}' | cut -d: -f1` - if [ "$devices" == "" ]; then - warning "No harddisks found" - fi - for dev in $devices; do - debug "$SFDISK will try to backup partition tables for device $dev" - [ -b $dev ] || continue - label=${dev#/dev/} - label=${label//\//-} - outputfile=${partitionsfile//__star__/$label} - debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null" - $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null - if [ $? -ne 0 ]; then - warning "The partition table for $dev could not be saved." - fi - done + if [ "$devices" == "" ]; then + warning "No harddisks found" + fi + for dev in $devices; do + debug "$SFDISK will try to backup partition tables for device $dev" + [ -b $dev ] || continue + label=${dev#/dev/} + label=${label//\//-} + outputfile=${partitionsfile//__star__/$label} + debug "$SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null" + $SFDISK $sfdisk_options -d $dev > $outputfile 2>/dev/null + if [ $? -ne 0 ]; then + warning "The partition table for $dev could not be saved." + fi + done fi if [ "$dohwinfo" == "yes" ]; then debug "Using $HWINFO to get all available disk information" @@ -639,8 +639,8 @@ function doLvmBackup () { fi fi if [ ! -w "$lvmdir" ]; then - echo "can not write to directory $lvmdir" - return 2 + echo "can not write to directory $lvmdir" + return 2 fi debug "Let's try to gather the list of LVM volume groups" debug "$VGS --options vg_name --noheadings | @SED@ 's/^[ ]*//' | @SED@ 's/[ ]*$//' | tr '\n' ' '" |