aboutsummaryrefslogtreecommitdiff
path: root/handlers/dup.in
diff options
context:
space:
mode:
Diffstat (limited to 'handlers/dup.in')
-rw-r--r--handlers/dup.in226
1 files changed, 141 insertions, 85 deletions
diff --git a/handlers/dup.in b/handlers/dup.in
index 055531f..00f4b58 100644
--- a/handlers/dup.in
+++ b/handlers/dup.in
@@ -31,11 +31,13 @@ getconf destdir
getconf destuser
destdir=${destdir%/}
-[ "$destdir" != "" ] || fatal "Destination directory not set"
-[ "$include" != "" ] || fatal "No source includes specified"
+### SANITY CHECKS ##############################################################
-### vservers stuff ###
+[ -n "$destdir" ] || fatal "Destination directory not set"
+[ -n "$include" ] || fatal "No source includes specified"
+[ -n "$password" ] || fatal "The password option must be set."
+### VServers
# If vservers are configured, check that the ones listed in $vsnames do exist.
local usevserver=no
if [ $vservers_are_available = yes ]; then
@@ -54,109 +56,132 @@ else
[ -z "$vsinclude" ] || warning 'vservers support disabled in backupninja.conf, vsincludes configuration lines will be ignored'
fi
-
-### see if we can login ###
-
+### See if we can login on $desthost
if [ "$testconnect" == "yes" ]; then
- debug "ssh $sshoptions -o PasswordAuthentication=no $desthost -l $destuser 'echo -n 1'"
- if [ ! $test ]; then
- result=`ssh $sshoptions -o PasswordAuthentication=no $desthost -l $destuser 'echo -n 1'`
- if [ "$result" != "1" ]; then
- fatal "Can't connect to $desthost as $destuser."
- else
- debug "Connected to $desthost as $destuser successfully"
- fi
- fi
+ debug "ssh $sshoptions -o PasswordAuthentication=no $desthost -l $destuser 'echo -n 1'"
+ if [ ! $test ]; then
+ result=`ssh $sshoptions -o PasswordAuthentication=no $desthost -l $destuser 'echo -n 1'`
+ if [ "$result" != "1" ]; then
+ fatal "Can't connect to $desthost as $destuser."
+ else
+ debug "Connected to $desthost as $destuser successfully"
+ fi
+ fi
fi
-### COMMAND-LINE MANGLING ###
+### COMMAND-LINE MANGLING ######################################################
+
+### initialize $execstr*
+execstr_command=
+execstr_options="$options --no-print-statistics"
+execstr_source=
+execstr_serverpart="scp://$destuser@$desthost/$destdir"
+### duplicity version
duplicity_version="`duplicity --version | @AWK@ '{print $2}'`"
duplicity_major="`echo $duplicity_version | @AWK@ -F '.' '{print $1}'`"
duplicity_minor="`echo $duplicity_version | @AWK@ -F '.' '{print $2}'`"
duplicity_sub="`echo $duplicity_version | @AWK@ -F '.' '{print $3}'`"
-# 1. duplicity >= 0.4.2 needs --sftp-command (NB: sftp does not support the -l option)
-# 2. duplicity >= 0.4.3 replaces --ssh-command with --ssh-options, which:
-# - is passed to scp and sftp commands by duplicity
-# - has a special syntax we can not directly feed the command line with
-# (e.g. "IdentityFile=/root/.ssh/id_dsa_backupninja Port=2222", without the -o)
-# so we don't use it: since this version does not use the ssh command anymore,
-# we keep compatibility with our previous config files by passing $sshoptions to
-# --scp-command and --sftp-command ourselves
+### ssh/scp/sftp options
+# 1. duplicity >= 0.4.2 needs --sftp-command
+# (NB: sftp does not support the -l option)
+# 2. duplicity 0.4.3 to 0.4.9 replace --ssh-command with --ssh-options, which is
+# passed to scp and sftp commands by duplicity. We don't use it: since this
+# version does not use the ssh command anymore, we keep compatibility with
+# our previous config files by passing $sshoptions to --scp-command and
+# --sftp-command ourselves
scpoptions="$sshoptions"
[ "$bandwidthlimit" == 0 ] || scpoptions="$scpoptions -l $bandwidthlimit"
-execstr="$options --no-print-statistics "
-
# < 0.4.2 : only uses ssh and scp
if [ "$duplicity_major" -le 0 -a "$duplicity_minor" -le 4 -a "$duplicity_sub" -lt 2 ]; then
- execstr="$execstr --scp-command 'scp $scpoptions' --ssh-command 'ssh $sshoptions' "
+ execstr_options="${execstr_options} --scp-command 'scp $scpoptions' --ssh-command 'ssh $sshoptions'"
# >= 0.4.2 : also uses sftp, --sftp-command option is now supported
else
sftpoptions="$sshoptions"
# == 0.4.2 : uses ssh, scp and sftp
if [ "$duplicity_major" -eq 0 -a "$duplicity_minor" -eq 4 -a "$duplicity_sub" -eq 2 ]; then
- execstr="$execstr --scp-command 'scp $scpoptions' --sftp-command 'sftp $sftpoptions' --ssh-command 'ssh $sshoptions' "
+ execstr_options="${execstr_options} --scp-command 'scp $scpoptions' --sftp-command 'sftp $sftpoptions' --ssh-command 'ssh $sshoptions'"
# >= 0.4.3 : uses only scp and sftp, --ssh-command option is not supported anymore
else
- execstr="$execstr --scp-command 'scp $scpoptions' --sftp-command 'sftp $sftpoptions' "
+ execstr_options="${execstr_options} --scp-command 'scp $scpoptions' --sftp-command 'sftp $sftpoptions'"
fi
fi
-# deal with symmetric or asymmetric (public/private key pair) encryption
+### Symmetric or asymmetric (public/private key pair) encryption
if [ -n "$encryptkey" ]; then
- execstr="${execstr}--encrypt-key $encryptkey "
- debug "Data will be encrypted with the GnuPG key $encryptkey."
+ execstr_options="${execstr_options} --encrypt-key $encryptkey"
+ debug "Data will be encrypted with the GnuPG key $encryptkey."
else
- debug "Data will be encrypted using symmetric encryption."
+ debug "Data will be encrypted using symmetric encryption."
fi
-# deal with data signing
+### Data signing (or not)
if [ "$sign" == yes ]; then
- # duplicity is not able to sign data when using symmetric encryption
- [ -n "$encryptkey" ] || fatal "The encryptkey option must be set when signing."
- # if needed, initialize signkey to a value that is not empty (checked above)
- [ -n "$signkey" ] || signkey="$encryptkey"
- execstr="${execstr}--sign-key $signkey "
- debug "Data will be signed will the GnuPG key $signkey."
+ # duplicity is not able to sign data when using symmetric encryption
+ [ -n "$encryptkey" ] || fatal "The encryptkey option must be set when signing."
+ # if needed, initialize signkey to a value that is not empty (checked above)
+ [ -n "$signkey" ] || signkey="$encryptkey"
+ execstr_options="${execstr_options} --sign-key $signkey"
+ debug "Data will be signed will the GnuPG key $signkey."
else
- debug "Data won't be signed."
+ debug "Data won't be signed."
fi
-# deal with GnuPG passphrase
-[ -n "$password" ] || fatal "The password option must be set."
-
-if [ "$keep" != "yes" ]; then
- if [ "`echo $keep | tr -d 0-9`" == "" ]; then
- keep="${keep}D"
- fi
- execstr="${execstr}--remove-older-than $keep "
+### Incremental or full backup mode
+# If incremental==yes, use the default duplicity behaviour: perform an
+# incremental backup if old signatures can be found, else switch to
+# full backup.
+# If incremental==no, force a full backup anyway.
+if [ "$incremental" == "no" ]; then
+ # before 0.4.4, full was an option and not a command
+ if [ "$duplicity_major" -le 0 -a "$duplicity_minor" -le 4 -a "$duplicity_sub" -lt 4 ]; then
+ execstr_options="${execstr_options} --full"
+ else
+ execstr_command="full"
+ fi
fi
-if [ "$incremental" == "no" ]; then
- execstr="${execstr}--full "
+### Temporary directory
+precmd=
+if [ -n "$tmpdir" ]; then
+ if [ ! -d "$tmpdir" ]; then
+ info "Temporary directory ($tmpdir) does not exist, creating it."
+ mkdir -p "$tmpdir"
+ [ $? -eq 0 ] || fatal "Could not create temporary directory ($tmpdir)."
+ fi
+ info "Using $tmpdir as TMPDIR"
+ precmd="${precmd}TMPDIR=$tmpdir "
fi
-execstr_serverpart="scp://$destuser@$desthost/$destdir"
-execstr_clientpart="/"
+### Cleanup old backup sets (or not)
+if [ "$keep" != "yes" ]; then
+ if [ "`echo $keep | tr -d 0-9`" == "" ]; then
+ keep="${keep}D"
+ fi
+ # before 0.4.4, remove-older-than was an option and not a command
+ if [ "$duplicity_major" -le 0 -a "$duplicity_minor" -le 4 -a "$duplicity_sub" -lt 4 ]; then
+ execstr_options="${execstr_options} --remove-older-than $keep"
+ fi
+fi
-### SOURCE ###
+### Source
set -o noglob
# excludes
for i in $exclude; do
str="${i//__star__/*}"
- execstr="${execstr}--exclude '$str' "
+ execstr_source="${execstr_source} --exclude '$str'"
done
-
-# includes
+
+# includes
for i in $include; do
[ "$i" != "/" ] || fatal "Sorry, you cannot use 'include = /'"
str="${i//__star__/*}"
- execstr="${execstr}--include '$str' "
+ execstr_source="${execstr_source} --include '$str'"
done
# vsincludes
@@ -165,43 +190,74 @@ if [ $usevserver = yes ]; then
for vi in $vsinclude; do
str="${vi//__star__/*}"
str="$VROOTDIR/$vserver$str"
- execstr="${execstr}--include '$str' "
+ execstr_source="${execstr_source} --include '$str'"
done
done
fi
set +o noglob
-### deal with tmpdir ###
-precmd=
-if [ -n "$tmpdir" ]; then
- if [ ! -d "$tmpdir" ]; then
- info "Temporary directory ($tmpdir) does not exist, creating it."
- mkdir -p "$tmpdir"
- [ $? -eq 0 ] || fatal "Could not create temporary directory ($tmpdir)."
+### EXECUTE ####################################################################
+
+execstr_source=${execstr_source//\\*/\\\\\\*}
+
+### Cleanup commands (duplicity >= 0.4.4)
+
+# cleanup
+if [ "$duplicity_major" -ge 0 -a "$duplicity_minor" -ge 4 -a "$duplicity_sub" -ge 4 ]; then
+ debug "$precmd duplicity cleanup $execstr_options $execstr_serverpart"
+ if [ ! $test ]; then
+ export PASSPHRASE=$password
+ output=`nice -n $nicelevel \
+ su -c \
+ "$precmd duplicity cleanup $execstr_options $execstr_serverpart 2>&1"`
+ exit_code=$?
+ if [ $exit_code -eq 0 ]; then
+ debug $output
+ info "Duplicity cleanup finished successfully."
+ else
+ debug $output
+ warning "Duplicity cleanup failed."
+ fi
fi
- info "Using $tmpdir as TMPDIR"
- precmd="${precmd}TMPDIR=$tmpdir "
fi
-### EXECUTE ###
-
-execstr=${execstr//\\*/\\\\\\*}
+# remove-older-than
+if [ "$keep" != "yes" ]; then
+ if [ "$duplicity_major" -ge 0 -a "$duplicity_minor" -ge 4 -a "$duplicity_sub" -ge 4 ]; then
+ debug "$precmd duplicity remove-older-than $keep $execstr_options $execstr_serverpart"
+ if [ ! $test ]; then
+ export PASSPHRASE=$password
+ output=`nice -n $nicelevel \
+ su -c \
+ "$precmd duplicity remove-older-than $keep $execstr_options $execstr_serverpart 2>&1"`
+ exit_code=$?
+ if [ $exit_code -eq 0 ]; then
+ debug $output
+ info "Duplicity remove-older-than finished successfully."
+ else
+ debug $output
+ warning "Duplicity remove-older-than failed."
+ fi
+ fi
+ fi
+fi
-debug "$precmd duplicity $execstr --exclude '**' / $execstr_serverpart"
+### Backup command
+debug "$precmd duplicity $execstr_command $execstr_options $execstr_source --exclude '**' / $execstr_serverpart"
if [ ! $test ]; then
- export PASSPHRASE=$password
- output=`nice -n $nicelevel \
- su -c \
- "$precmd duplicity $execstr --exclude '**' / $execstr_serverpart 2>&1"`
- code=$?
- if [ $code -eq 0 ]; then
- debug $output
- info "Duplicity finished successfully."
- else
- debug $output
- fatal "Duplicity failed."
- fi
-fi
+ export PASSPHRASE=$password
+ output=`nice -n $nicelevel \
+ su -c \
+ "$precmd duplicity $execstr_command $execstr_options $execstr_source --exclude '**' / $execstr_serverpart 2>&1"`
+ exit_code=$?
+ if [ $exit_code -eq 0 ]; then
+ debug $output
+ info "Duplicity finished successfully."
+ else
+ debug $output
+ fatal "Duplicity failed."
+ fi
+fi
return 0