diff options
| -rw-r--r-- | AUTHORS | 0 | ||||
| -rw-r--r-- | ChangeLog | 165 | ||||
| -rw-r--r-- | INSTALL | 231 | ||||
| -rw-r--r-- | Makefile.am | 7 | ||||
| -rw-r--r-- | Makefile.in | 531 | ||||
| -rw-r--r-- | NEWS | 0 | ||||
| -rw-r--r-- | README | 256 | ||||
| -rw-r--r-- | aclocal.m4 | 667 | ||||
| -rwxr-xr-x | autogen.sh | 17 | ||||
| -rw-r--r-- | backupninja.spec | 59 | ||||
| -rw-r--r-- | backupninja.spec.in | 59 | ||||
| -rwxr-xr-x | configure | 2677 | ||||
| -rw-r--r-- | configure.in | 33 | ||||
| -rwxr-xr-x | install-sh | 322 | ||||
| -rwxr-xr-x | missing | 353 |
15 files changed, 5377 insertions, 0 deletions
diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..04b6181 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,165 @@ +version 0.9.1 + fixed many bugs in rdiff helper + rdiff handler does not require 'label' + +version 0.9 -- October 19 2005 + *** IMPORTANT CHANGE, UPGRADE AT ONCE *** + fixed insecure temporary file creation + ***************************************** + removed erroneous magic file marker in pgsql handler + fixed incorrect find positional + changed direct grep of /etc/passwd to getent passwd. + rdiff helper has much better information on failed ssh attempt + (patch from cmccallum@thecsl.org). + rdiff handler now supports remote source and local dest. + (patch from cmccallum@thecsl.org). + man pages are greatly improved. + +version 0.8 -- September 15 2005 + added pgsql (PostgreSQL) handler, with vservers support. + added vservers support to duplicity handler + Note: the configuration is a bit different than the rdiff + handler's one, but the default behavior is the same: + have a look at example.dup. + improved README + documented .disabled method. + corrected VROOTDIR default value. + added ninjahelper to the install instructions. + improved rdiff, dup and sys handlers' vservers support + prevent vserver-debiantools' $VROOTDIR/ARCHIVES directory + to be seen as a vserver + changes to sys handler + make use of configurable $VSERVERINFO instead of hard-coded vserver-info. + fixed dpkg existence test inside vserver. + fixed $nodpkg use. + changes to pgsql handler + now checks if the specified vserver is running. + now checks if $PGSQLDUMP/$PGSQLDUMPALL are available where needed. + now checks if "postgres" user exists on the host/vserver. + changes to ninjahelper + check_perms() does not die anymore on group/world readable + helper scripts (now consistent with the "helper scripts + must not be group or world writable!" error msg). + xedit action now tries $EDITOR, then /etc/alternatives/editor, + then nano, vim and vi, and aborts if none of these exists. + added helper for pgsql handler. + rdiff handler now does not require 'label' + changes to mysql and svn handlers' vservers support + these handlers now check if the source vserver is running + added 'ignores' for mysql handler. (thanks Daniel.Bonniot@inria.fr) + +version 0.7 -- July 26 2005 + added ninjahelper: a dialog based wizard for creating backupninja configs. + considerably improved and changed the log file output. + you can now disable actions with .disabled (this is new preferred method). + added makecd handler and example.makecd for backing up to cd/dvd (thanks stef). + fixed bug when specifying multiple 'when' options. + +version 0.6 -- June 16 2005 + ldap handler has new options: backup method to use (ldapsearch or + slapcat), restart, passwordfile and binddn. Default backup method + is set to ldapsearch as this is safer + ****************************************************************** + NOTE: to get the previous default behavior with the ldap handler, + you must set "method = slapcat". The new default is ldapsearch. + ****************************************************************** + implemented fix so that the main script will echo fatal errors rather + than being silent about them, this means an error message every hour + if there is a major configuration problem (not a handler problem) + added vserver support to main script and to the handlers: mysql, svn, sys, rdiff + changes to duplicity handler (thanks intrigeri!): + "keep = yes" now disables file cleaning on desthost + added "sign" option for backups signing + added "encryptkey" option to specify the gpg key to use + split config into [source], [gpg] and [dest] sections + added "nicelevel" option + added "testconnect" option + added "sshoptions" option (will be passed to ssh/scp) + added "bandwidthlimit" option + example.dup example config file for duplicity handler + added trac (http://trac.edgewall.com/) environment handler (thanks Charles Lepple!) + added configfile option to mysql handler + the default is /etc/mysql/debian.cnf. with this, + sqldump doesn't need dbusername. (hotcopy still does). + fixed bug in mysql handler which caused some passwords to not work. + (.my.cnf files now have double quotes around password) + can now pass options to hwinfo and sfdisk in sys handler. + +version 0.5 -- April 12 2005 + rdiff handler works when remote sshd has a banner + rdiff handler supports local dest + logfile is created if it doesn't exist + added "when = hourly" + added optional 'nicelevel' to rdiff handler + fixed bug where actions were not run in numeric order. + improved 'when' parsing. + +version 0.4.4 -- March 18 2005 + results of handlers are now read line by line. + changes to rdiff handler: added "options", and "keep" is + not necessarily days now (ie, it will pass straight through to + rdiff-backup if the keep has a unit on it, otherwise it adds the 'D'). + added dup handler (still pretty beta) + added maildir handler (very specialized handler) + added --run option (runs the specified action file) + improved sys handler, now uses hwinfo + added subversion hotbackup handler, svn. + added PATH to cron.d file, which fixes file not found errors. + +version 0.4.2 -- Jan 6 2005 + fixed bug which caused a report email to be sent even if no actions were run. + fixed bug where multiple handler status messages were ignored + added status in the subject line of report emails + +version 0.4.1 -- Jan 3 2005 + added $usecolors and now more conservative about when colors are echoed. + fixed major bug, 'when' actually works now. + replaced debug function with debug, info, warning, error, fatal. + added --now option to force all actions to be performed now. + +version 0.4 -- Dec 26 2004 + added "when" option, so that all configs can specify when + they are to be run. + added reportsuccess and reportwarning config options + added .sys handler (hardware, packages, partitions). + +version 0.3.4 -- Dec 8 2004 + fixed numerical variable quoting compatibility with older wc + fixed stderr redirect bug + some comments in example.rdiff + +version 0.3.3 -- Nov 10 2004 + '*' (asterisk) works now in rdiff config files + works now with gawk as well as mawk + many bug fixes to ldap handler + paths to helper scripts can be configured in global config + does not require /usr/bin/stat + +version 0.3.2 -- Sept 29 2004 + handler scripts are no longer executable (to comply with debian policy) + handler error and warning messages are sent with the notify email + +version 0.3.1 -- Sept 5 2004 + added ldap handler + moved sh support to a handler script + add test mode, where no action is taken. + added --help + force only root can read /etc/backup.d/* + fixed missing equals symbols in example.rdiff + changed backupninja executable to be /usr/sbin rather than /usr/bin + +version 0.3 -- Oct 20 2004 + ** IMPORTANT ** all config files are now ini style, not apache style + rewrote all scripts in bash for portability + added drop-in backupninja lib directory (/usr/share/backupninja) + all scripts are now run as root + +version 0.2 -- Oct 14 2004 + move distribution folder ./cron.d to ./etc/cron.d + fixed bug: removed printr of excludes (!) + added support for changing the user/group in rdiff sources. + added support for .mysql config files. + +version 0.1 -- Oct 8 2004 + initial release + @@ -0,0 +1,231 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + +These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + +You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + +By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PREFIX', the package will +use PREFIX as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + +Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the `--target=TYPE' option to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..2a947e1 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,7 @@ +# vi: noexpandtab softtabstop=0 +## Process this file with automake to produce Makefile.in + +EXTRA_DIST = README COPYING AUTHORS INSTALL NEWS ChangeLog \ + backupninja.spec backupninja.spec.in autogen.sh + +SUBDIRS = etc examples handlers man src diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..366d466 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,531 @@ +# Makefile.in generated by automake 1.9.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# vi: noexpandtab softtabstop=0 +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/backupninja.spec.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + install-sh missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = backupninja.spec +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BASH = @BASH@ +CFGDIR = @CFGDIR@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +EXTRA_DIST = README COPYING AUTHORS INSTALL NEWS ChangeLog \ + backupninja.spec backupninja.spec.in autogen.sh + +SUBDIRS = etc examples handlers man src +all: all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +backupninja.spec: $(top_builddir)/config.status $(srcdir)/backupninja.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + $(mkdir_p) $(distdir)/. + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-generic clean-recursive ctags \ + ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ + dist-tarZ dist-zip distcheck distclean distclean-generic \ + distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: @@ -0,0 +1,256 @@ + + |\_ + B A C K U P N I N J A /()/ + `\| + + a silent flower blossom death strike to lost data. + +Backupninja allows you to coordinate system backup by dropping a few +simple configuration files into /etc/backup.d/. Most programs you +might use for making backups don't have their own configuration file +format. Backupninja provides a centralized way to configure and +coordinate many different backup utilities. + +Features: + - easy to read ini style configuration files. + - you can drop in scripts to handle new types of backups. + - backup actions can be scheduled + - you can choose when status report emails are mailed to you + (always, on warning, on error, never). + - console-based wizard (ninjahelper) makes it easy to create + backup action configuration files. + - passwords are never sent via the command line to helper programs. + - works with Linux-Vservers (http://linux-vserver.org/) + +Backup types: + - secure, remote, incremental filesytem backup (via rdiff-backup). + incremental data is compressed. permissions are retained even + with an unpriviledged backup user. + - backup of mysql databases (via mysqlhotcopy and mysqldump). + - backup of ldap databases (via slapcat and ldapsearch). + - basic system and hardware info + - encrypted remote backups (via duplicity). + - backup of subversion repositories. + +The following options are available: +-h, --help This usage message +-d, --debug Run in debug mode, where all log messages are + output to the current shell. +-f, --conffile FILE Use FILE for the main configuration instead + of /etc/backupninja.conf +-t, --test Test run mode. This will test if the backup could run, without actually + preforming any backups. For example, it will attempt to authenticate + or test that ssh keys are set correctly. +-n, --now Perform actions now, instead of when they might be scheduled. + No output will be created unless also run with -d. +--run FILE Runs the specified action FILE (e.g. one of the /etc/backup.d/ files). + Also puts backupninja in debug mode. + +CONFIGURATION FILES +=================== + +The general configuration file is /etc/backupninja.conf. In this file +you can set the log level and change the default directory locations. +You can force a different general configuration file with "backupninja +-f /path/to/conf". + +To preform the actual backup, backupninja processes each configuration +file in /etc/backup.d according to the file's suffix: + + .sh -- run this file as a shell script. + .rdiff -- filesystem backup (using rdiff-backup) + .dup -- filesystem backup (using duplicity) + .mysql -- backup mysql databases + .ldap -- backup ldap databases + .pgsql -- backup PostgreSQL databases + .sys -- general hardware, partition, and system reports. + .svn -- backup subversion repositories + .maildir -- incrementally backup maildirs (very specialized) + +Support for additional configuration types can be added by dropping +bash scripts with the name of the suffix into /usr/share/backupninja. + +The configuration files are processed in alphabetical order. However, +it is suggested that you name the config files in "sysvinit style." + +For example: + 00-disabled.ldap + 10-runthisfirst.sh + 20-runthisnext.mysql + 90-runthislast.rdiff + +Typically, you will put a '.rdiff' config file last, so that any +database dumps you make are included in the filesystem backup. +Configurations files with names beginning with 0 (zero) or ending with +.disabled (preferred method) are skipped. + +Unless otherwise specified, the config file format is "ini style." + +For example: + + # this is a comment + + [fishes] + fish = red + fish = blue + + [fruit] + apple = yes + pear = no thanks \ + i will not have a pear. + + +SCHEDULING +========== + +By default, each configuration file is processed everyday at 01:00 (1 +AM). This can be changed by specifying the 'when' option in a config +file. + +For example: + + when = sundays at 02:00 + when = 30th at 22 + when = 30 at 22:00 + when = everyday at 01 <-- the default + when = Tuesday at 05:00 + +A configuration file will be processed at the time(s) specified by the +"when" option. If multiple "when" options are present, then they all +apply. If two configurations files are scheduled to run in the same +hour, then we fall back on the alphabetical ordering specified above. +If two configurations files are scheduled close to one another in +time, it is possible to have multiple copies of backupninja running if +the first instance is not finished before the next one starts. + +Make sure that you put the "when" option before any sections in your +configuration file. + +These values for 'when' are equivalent: + + when = tuesday at 05:30 + when = TUESDAYS at 05 + +These values for 'when' are invalid: + + when = tuesday at 2am + when = tuesday at 2 + when = tues at 02 + + +REAL WORLD USAGE +================ + +Backupninja can be used to implement whatever backup strategy you +choose. It is intended, however, to be used like so: + +(1) First, databases are safely copied or exported to /var/backups. + Typically, you cannot make a file backup of a database while it + is in use, hence the need to use special tools to make a safe copy + or export into /var/backups. + +(2) Then, vital parts of the file system, including /var/backups, are + nightly pushed to a remote, off-site, hard disk (using + rdiff-backup). The local user is root, but the remote user is not + priviledged. Hopefully, the remote filesystem is encrypted. + +There are many different backup strategies out there, including "pull +style", magnetic tape, rsync + hard links, etc. We believe that the +strategy outlined above is the way to go because: (1) hard disks are +very cheap these days, (2) pull style backups are no good, because then +the backup server must have root on the production server, and (3) +rdiff-backup is more space efficient and featureful than using rsync + +hard links. + + +SSH KEYS +======== + +In order for rdiff-backup to sync files over ssh unattended, you must +create ssh keys on the source server and copy the public key to the +remote user's authorized keys file. For example: + + root@srchost# ssh-keygen -t dsa + root@srchost# ssh-copy-id -i /root/.ssh/id_dsa.pub backup@desthost + +Now, you should be able to ssh from user 'root' on srchost to +user 'backup' on desthost without specifying a password. + +Note: when prompted for a password by ssh-keygen, just leave it +blank by hitting return. + +The included helper program "ninjahelper" will walk you through creating +an rdiff-backup configuration, and will set up the ssh keys for you. + +INSTALLATION +============ + +Requirements: + apt-get install bash gawk + +Recommended: + apt-get install rdiff-backup gzip hwinfo + +Files: + /usr/sbin/backupninja -- main script + /etc/cron.d/backupninja -- runs main script nightly + /etc/logrotate.d/backupninja -- rotates backupninja.log + /etc/backup.d/ -- directory for configuration files + /etc/backupninja.conf -- general options + /usr/share/backupninja -- handler scripts which do the actual work + +Installation: + There is no install script, but you just need to move files to the + correct locations. All files should be owned by root. + + # tar xvzf backupninja.tar.gz + # cd backupninja + # mv backupninja /usr/sbin/backupninja + # mv ninjahelper /usr/sbin/ninjahelper + # mv etc/logrotate.d/backupninja /etc/logrotate.d/backupninja + # mv etc/cron.d/backupninja /etc/cron.d/backupninja + # mkdir /etc/backup.d/ + # mv etc/backupninja.conf /etc/backupninja.conf + # mv handlers /usr/share/backupninja + + +VSERVERS +======== + +If you are using Linux-Vservers (http://linux-vserver.org/) there are some +special capabilities that different handlers have to make vserver backups easier. +Set the variable "vservers" to be "yes" in /etc/backupninja.conf and see the +example configuration files for each handler to configure the vserver specific +variables. + +Additional vserver variables that can be configured in /etc/backupninja.conf. but +probably don't need to be changed: + +VSERVERINFO (default: /usr/sbin/vserver-info) +VSERVER (default: /usr/sbin/vserver) +VROOTDIR (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`) + +NINJAHELPER +=========== + +Ninjahelper is an additional script which will walk you through the process of +configuring backupninja. Ninjahelper has a menu driven curses based interface +(using dialog). + +To add an additional 'wizard' to ninjahelper, follow these steps: + +(1) to add a helper for the handler "blue", create the file + blue.helper in the directory where the handlers live. + (ie /usr/share/backupninja). + +(2) next, you need to add your helper to the global HELPERS variable + and define the main function for your helper (the function name + is always <helper>_wizard). for example, blue.helper: + HELPERS="$HELPERS blue:description_of_this_helper" + blue_wizard() { + ... do work here ... + } + +(3) check the examples of the included helpers to see how they are + written. The dialog functions are defined in easydialog.sh. + diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..2726b2a --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,667 @@ +# generated automatically by aclocal 1.9.2 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# -*- Autoconf -*- +# Copyright (C) 2002, 2003 Free Software Foundation, Inc. +# Generated from amversion.in; do not edit by hand. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.2])]) + +# AM_AUX_DIR_EXPAND + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# This macro actually does too much some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 11 + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# -*- Autoconf -*- +# Copyright (C) 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# -*- Autoconf -*- + + +# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. + +# Copyright (C) 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 2 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# +# Check to make sure that the build environment is sane. +# + +# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# AM_PROG_INSTALL_STRIP + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..05a815a --- /dev/null +++ b/autogen.sh @@ -0,0 +1,17 @@ +#!/bin/bash + +if [ "x$1" = "x-f" ] +then + autoscan + [ -f "configure.in" ] && cp "configure.in" "configure.in.old" + mv -f "configure.scan" "configure.in" + echo "## This is just AUTOSCAN draft of configure.in" + $EDITOR "configure.in" +fi + +### použÃt jen když je tÅ™eba použÃt configure.h.in +#autoheader + +aclocal +automake -a +autoconf diff --git a/backupninja.spec b/backupninja.spec new file mode 100644 index 0000000..ddf6e0a --- /dev/null +++ b/backupninja.spec @@ -0,0 +1,59 @@ +%define name backupninja +%define version 0.9.0 + +Summary: Backupninja backup tool +Name: %{name} +Version: %{version} +Release: 1 +License: GPL +Group: Applications/System +URL: http://dev.riseup.net/backupninja/ +Source: %{name}-%{version}.tar.gz +Requires: bash, gawk, rdiff-backup, gzip +Provides: %{name} +Packager: Petr Klima <Petr.Klima@madeta-group.cz> +BuildRoot: %{_tmppath}/%{name}-%{version} +Prefix: %{_prefix} + +%description +Modular rdiff.backup tool + +%prep +#rm -rf ${buildroot} +%setup -q + +%build +%configure +# this is necessary MAKEINSTALL rewrites @sysconfigdir@ atc. +%{__make} + +%install +%makeinstall +mkdir -p "%{buildroot}%{_sysconfdir}/backup.d" +mkdir -p "%{buildroot}%{_localstatedir}/backups" +mkdir -p "%{buildroot}%{_localstatedir}/log" +touch "%{buildroot}%{_localstatedir}/log/backupninja.log" + +%clean +#rm -fr %{buildroot} + +%files +%defattr(0750,root,root) +%{_sbindir}/* +%{_datadir}/backupninja/* +%{_sysconfdir}/cron.d/backupninja +%{_sysconfdir}/logrotate.d/backupninja + +%defattr(0600,root,root) +%config(noreplace) %{_sysconfdir}/backupninja.conf +%dir %{_sysconfdir}/backup.d +%dir %{_localstatedir}/backups +%ghost %{_localstatedir}/log/backupninja.log + +%defattr(0644,root,root) +%doc AUTHORS COPYING ChangeLog INSTALL NEWS README +%{_mandir}/* + +%changelog +* Mon Apr 29 2002 Petr Klima <Petr.Klima@madeta-group.cz> 0.7.0 +- first RPM release diff --git a/backupninja.spec.in b/backupninja.spec.in new file mode 100644 index 0000000..a7f820b --- /dev/null +++ b/backupninja.spec.in @@ -0,0 +1,59 @@ +%define name @PACKAGE_NAME@ +%define version @PACKAGE_VERSION@ + +Summary: Backupninja backup tool +Name: %{name} +Version: %{version} +Release: 1 +License: GPL +Group: Applications/System +URL: http://dev.riseup.net/backupninja/ +Source: %{name}-%{version}.tar.gz +Requires: bash, gawk, rdiff-backup, gzip +Provides: %{name} +Packager: Petr Klima <Petr.Klima@madeta-group.cz> +BuildRoot: %{_tmppath}/%{name}-%{version} +Prefix: %{_prefix} + +%description +Modular rdiff.backup tool + +%prep +#rm -rf ${buildroot} +%setup -q + +%build +%configure +# this is necessary MAKEINSTALL rewrites @sysconfigdir@ atc. +%{__make} + +%install +%makeinstall +mkdir -p "%{buildroot}%{_sysconfdir}/backup.d" +mkdir -p "%{buildroot}%{_localstatedir}/backups" +mkdir -p "%{buildroot}%{_localstatedir}/log" +touch "%{buildroot}%{_localstatedir}/log/backupninja.log" + +%clean +#rm -fr %{buildroot} + +%files +%defattr(0750,root,root) +%{_sbindir}/* +%{_datadir}/backupninja/* +%{_sysconfdir}/cron.d/backupninja +%{_sysconfdir}/logrotate.d/backupninja + +%defattr(0600,root,root) +%config(noreplace) %{_sysconfdir}/backupninja.conf +%dir %{_sysconfdir}/backup.d +%dir %{_localstatedir}/backups +%ghost %{_localstatedir}/log/backupninja.log + +%defattr(0644,root,root) +%doc AUTHORS COPYING ChangeLog INSTALL NEWS README +%{_mandir}/* + +%changelog +* Mon Apr 29 2002 Petr Klima <Petr.Klima@madeta-group.cz> 0.7.0 +- first RPM release diff --git a/configure b/configure new file mode 100755 index 0000000..39a061e --- /dev/null +++ b/configure @@ -0,0 +1,2677 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59 for backupninja 0.9.0. +# +# Report bugs to <micah@riseup.net>. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='backupninja' +PACKAGE_TARNAME='backupninja' +PACKAGE_VERSION='0.9.0' +PACKAGE_STRING='backupninja 0.9.0' +PACKAGE_BUGREPORT='micah@riseup.net' + +ac_unique_file="src/backupninja.in" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar BASH CFGDIR LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures backupninja 0.9.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of backupninja 0.9.0:";; + esac + cat <<\_ACEOF + +Report bugs to <micah@riseup.net>. +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +backupninja configure 0.9.0 +generated by GNU Autoconf 2.59 + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by backupninja $as_me 0.9.0, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + +#AC_CONFIG_HEADERS([config.sh]) +am__api_version="1.9" +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +test "$program_prefix" != NONE && + program_transform_name="s,^,$program_prefix,;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$,$program_suffix,;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm conftest.sed + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$AWK" && break +done + +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='backupninja' + VERSION='0.9.0' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"$am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STRIP=$ac_ct_STRIP +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + +# Checks for programs. +for ac_prog in bash +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_BASH+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $BASH in + [\\/]* | ?:[\\/]*) + ac_cv_path_BASH="$BASH" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_BASH="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + ;; +esac +fi +BASH=$ac_cv_path_BASH + +if test -n "$BASH"; then + echo "$as_me:$LINENO: result: $BASH" >&5 +echo "${ECHO_T}$BASH" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$BASH" && break +done + +#AC_PATH_PROGS([PERL], [perl]) + +#AC_DEFINE([MYVERSION], [5.6]) +#AC_DEFINE_UNQUOTED([MYDIR], "${sysconfdir}") +#AC_DEFINE([SYSCONFDIR], [$sysconfdir], [System config dir]) +CFGDIR="${sysconfdir}" + + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + + ac_config_files="$ac_config_files Makefile etc/Makefile examples/Makefile handlers/Makefile man/Makefile src/Makefile" + + + ac_config_files="$ac_config_files backupninja.spec" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by backupninja $as_me 0.9.0, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to <bug-autoconf@gnu.org>." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +backupninja config.status 0.9.0 +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "etc/Makefile" ) CONFIG_FILES="$CONFIG_FILES etc/Makefile" ;; + "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; + "handlers/Makefile" ) CONFIG_FILES="$CONFIG_FILES handlers/Makefile" ;; + "man/Makefile" ) CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; + "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "backupninja.spec" ) CONFIG_FILES="$CONFIG_FILES backupninja.spec" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CYGPATH_W@,$CYGPATH_W,;t t +s,@PACKAGE@,$PACKAGE,;t t +s,@VERSION@,$VERSION,;t t +s,@ACLOCAL@,$ACLOCAL,;t t +s,@AUTOCONF@,$AUTOCONF,;t t +s,@AUTOMAKE@,$AUTOMAKE,;t t +s,@AUTOHEADER@,$AUTOHEADER,;t t +s,@MAKEINFO@,$MAKEINFO,;t t +s,@install_sh@,$install_sh,;t t +s,@STRIP@,$STRIP,;t t +s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +s,@mkdir_p@,$mkdir_p,;t t +s,@AWK@,$AWK,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@am__leading_dot@,$am__leading_dot,;t t +s,@AMTAR@,$AMTAR,;t t +s,@am__tar@,$am__tar,;t t +s,@am__untar@,$am__untar,;t t +s,@BASH@,$BASH,;t t +s,@CFGDIR@,$CFGDIR,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff --git a/configure.in b/configure.in new file mode 100644 index 0000000..64b72d0 --- /dev/null +++ b/configure.in @@ -0,0 +1,33 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_INIT([backupninja],[0.9.0],[micah@riseup.net]) +AC_CONFIG_SRCDIR([src/backupninja.in]) +#AC_CONFIG_HEADERS([config.sh]) +AM_INIT_AUTOMAKE + +# Checks for programs. +AC_PATH_PROGS([BASH], [bash]) +#AC_PATH_PROGS([PERL], [perl]) + +#AC_DEFINE([MYVERSION], [5.6]) +#AC_DEFINE_UNQUOTED([MYDIR], "${sysconfdir}") +#AC_DEFINE([SYSCONFDIR], [$sysconfdir], [System config dir]) +AC_SUBST([CFGDIR], "${sysconfdir}") + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +AC_CONFIG_FILES([Makefile + etc/Makefile + examples/Makefile + handlers/Makefile + man/Makefile + src/Makefile]) + +AC_OUTPUT([ backupninja.spec]) diff --git a/install-sh b/install-sh new file mode 100755 index 0000000..dd97db7 --- /dev/null +++ b/install-sh @@ -0,0 +1,322 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2004-09-10.20 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit 0;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit 0;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: @@ -0,0 +1,353 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2004-09-07.08 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit 0 + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit 0 + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: |