fixed autotools build, broken since r466, inhandlers/Makefile.am

1 files changed, 0 insertions, 348 deletions

diff --git a/handlers/rub b/handlers/rub
deleted file mode 100644
index bdd6e99..0000000
--- a/handlers/rub
+++ /dev/null
@@ -1,348 +0,0 @@
-#
-# backupninja handler to do incremental backups using
-# rsync and hardlinks, based on
-#
-#   http://www.mikerubel.org/computers/rsync_snapshots/
-#
-# feedback: rhatto at riseup.net | gpl
-# lot of enhancements grabbed from "rsnap" handler by paulv at bikkel.org
-#
-# Config file options
-# -------------------
-#
-#   [general]
-#   log = rsync log file
-#   partition = partition where the backup lives
-#   fscheck = set to 1 if fsck should run on $partition after the backup is made
-#   read_only = set to 1 if $partition is mounted read-only
-#   mountpoint = backup partition mountpoint or backup main folder
-#   backupdir = folder relative do $mountpoint where the backup should be stored
-#   days = number of backup increments (min = 5)
-#   lockfile = lockfile to be kept during backup execution
-#   enable_mv_timestamp_bug = set to "yes" if your system isnt handling timestamps correctly
-#   tmp = temp folder
-#
-#   [source]
-#   from = local or remote
-#   testconnect = when "yes", test the connection for a remote source before backup
-#   include = include folder on backup
-#   exclude = exclude folder on backup
-#   ssh = ssh command line (remote only)
-#   rsync = rsync program
-#   rsync_options = rsync command options
-#   exclude_vserver = vserver-name (valid only if vservers = yes on backupninja.conf)
-#   numericids = when set to 1, use numeric ids instead of user/group mappings on rsync
-#   compress = if set to 1, compress data on rsync (remote source only)
-#   bandwidthlimit = set a badnwidth limit in kbps (remote source only)
-#   remote_rsync = remove rsync program (remote source only)
-#
-#   [services]
-#   initscripts = absolute path where scripts are located
-#   service = script name to be stoped at the begining of the backup and started at its end
-#
-# You can also specify some system comands if you don't want the default system values:
-#
-#   [system]
-#   rm = rm command
-#   cp = cp command
-#   touch = touch command
-#   mv = mv command
-#   fsck = fsck command
-#
-# You dont need to manually specify vservers using "include = /vservers".
-# They are automatically backuped if vserver is set to "yes" on you backupninja.conf.
-#
-
-# config file evaluation
-
-setsection system
-getconf rm rm
-getconf cp cp
-getconf touch touch
-getconf mv mv
-getconf fsck fsck
-
-setsection general
-getconf log /var/log/backupninja-rub.log
-getconf partition
-getconf fscheck
-getconf read_only
-getconf mountpoint
-getconf backupdir
-getconf rotate
-getconf days
-getconf lockfile
-getconf nicelevel 0
-getconf enable_mv_timestamp_bug no
-getconf tmp /tmp
-
-setsection source
-getconf from local
-getconf testconnect no
-getconf rsync $RSYNC
-getconf rsync_options "-av --delete"
-getconf ssh ssh
-getconf user
-getconf host
-getconf include
-getconf exclude
-getconf exclude_vserver
-getconf numericids 0
-getconf compress 0
-getconf bandwidthlimit
-getconf remote_rsync rsync
-
-setsection services
-getconf initscripts
-getconf service
-
-# function definitions
-
-function rotate {
-
-  if [[ "$2" -lt 4 ]]; then
-    error "Rotate: minimum of 4 rotations"
-    exit 1
-  fi
-
-  if [ -d $1.$2 ]; then
-    $nice $mv /$1.$2 /$1.tmp
-  fi
-
-  for ((n=`echo "$2 - 1" | bc`; n >= 0; n--)); do
-    if [ -d $1.$n ]; then
-      dest=`echo "$n + 1" | bc`
-      $nice $mv /$1.$n /$1.$dest
-      $touch /$1.$dest
-    fi
-  done
-
-  if [ -d $1.tmp ]; then
-    $nice $mv /$1.tmp /$1.0
-  fi
-
-  if [ -d $1.1 ]; then
-    $nice $cp -alf /$1.1/. /$1.0
-  fi
-
-}
-
-function move_files {
-
- ref=$tmp/makesnapshot-mymv-$$;
- $touch -r $1 $ref;
- $mv $1 $2;
- $touch -r $ref $2;
- $rm $ref;
-
-}
-
-backupdir="$mountpoint/$backupdir"
-
-# does $backupdir exists?
-
-if [ ! -d "$backupdir" ]; then 
-  error "Backupdir $backupdir does not exist"
-  exit 1
-fi
-
-# setup number of increments
-
-if [ -z "$days" ]; then
-  keep="4"
-else
-  keep="`echo $days - 1 | bc -l`"
-fi
-
-# lockfile setup
-
-if [ ! -z "$lockfile" ]; then
-  $touch $lockfile || warning "Could not create lockfile $lockfile"
-fi
-
-# nicelevel setup
-
-if [ ! -z "$nicelevel" ]; then 
-  nice="nice -n $nicelevel"
-else 
-  nice=""
-fi
-
-# connection test
-
-if [ "$from" == "remote" ] && [ "$testconnect" == "yes" ]; then
-  debug "$ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'"
-  result=`ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'`
-  if [ "$result" != "1" ]; then
-    fatal "Can't connect to $host as $user."
-  else
-    debug "Connected to $srchost successfully"
-  fi
-fi
-
-# rsync options for local sources
-
-if [ "$from" == "local" ]; then
-
-  rsync_local_options="$rsync_options"
-
-  if [ ! -z "$numericids" ]; then
-    rsync_local_options="$rsync_local_options --numeric-ids "
-  fi
-
-fi
-
-# rsync options for remote sources
-
-if [ "$from" == "remote" ]; then
-
-  rsync_remote_options="$rsync_options --rsync-path=$remote_rsync"
-
-  if [ "$compress" == "1" ]; then
-    rsync_remote_options="$rsync_remote_options --compress"
-  fi
-
-  if [ ! -z "$bandwidthlimit" ]; then
-    rsync_remote_options="$rsync_remote_options --bwlimit=$bandwidthlimit"
-  fi
-
-  if [ ! -z "$numericids" ]; then
-    rsync_remote_options="$rsync_remote_options --numeric-ids"
-  fi
-
-fi
-
-# set mv procedure
-
-if [ $enable_mv_timestamp_bug == "yes" ]; then
-  mv=move_files
-fi
-
-# set excludes
-
-for path in $exclude; do
-  EXCLUDES="$EXCLUDES --exclude=$path"
-done
-
-# stop services
-
-if [ ! -z "$service" ]; then
-  for daemon in $service; do
-    info "Stopping service $daemon..."
-    $initscripts/$daemon stop
-  done
-fi
-
-echo "Starting backup at `date`" >> $log
-
-# mount backup destination folder as read-write
-
-if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
-  if [ -d "$mountpoint" ]; then
-    mount -o remount,rw $mountpoint
-    if (($?)); then
-      error "Could not mount $mountpoint"
-      exit 1
-    fi
-  fi
-fi
-
-# add vservers to included folders
-
-if [ "$vservers_are_available" == "yes" ]; then
-
-  # sane permission on backup
-  mkdir -p $backupdir/$VROOTDIR
-  chmod 000 $backupdir/$VROOTDIR
-
-  for candidate in $found_vservers; do
-    candidate="`basename $candidate`"
-    found_excluded_vserver="0"
-    for excluded_vserver in $exclude_vserver; do
-      if [ "$excluded_vserver" == "$candidate" ]; then
-        found_excluded_vserver="1"
-        break
-      fi
-    done
-    if [ "$found_excluded_vserver" == "0" ]; then
-      include="$include $VROOTDIR/$candidate"
-    fi
-  done
-fi
-
-# the backup procedure
-
-for SECTION in $include; do
-
-  section="`basename $SECTION`"
-
-  if [ ! -d "$backupdir/$SECTION/$section.0" ]; then
-    mkdir -p $backupdir/$SECTION/$section.0
-  fi
- 
-  info "Rotating $backupdir/$SECTION/$section..."
-  echo "Rotating $backupdir/$SECTION/$section..." >> $log
-  rotate $backupdir/$SECTION/$section $keep
-  info "Syncing $SECTION on $backupdir/$SECTION/$section.0..."
-
-  if [ "$from" == "local" ]; then
-    debug $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ 
-    $nice $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ >> $log
-    if [ "$?" != "0" ]; then
-      warning "Rsync error when trying to transfer $SECTION"
-    fi
-  elif [ "$from" == "remote" ]; then
-    if [ -z "$user" ] || [ -z "$host" ]; then
-      error "Config file error: either user or host was not specified"
-      exit 1
-    else
-      debug $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0
-      $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 >> $log
-      if [ "$?" != "0" ]; then
-        warning "Rsync error when trying to transfer $SECTION"
-      fi
-    fi
-  else
-    error "Invalid source $from"
-    exit 1
-  fi
-
-  $touch $backupdir/$SECTION/$section.0
-
-done
-
-# remount backup destination as read-only
-
-if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
-  mount -o remount,ro $mountpoint
-fi
-
-# check partition for errors
-
-if [ "$fscheck" == "1" ] || [ "$fscheck" == "yes" ]; then
-  umount $mountpoint
-  if (($?)); then
-    warning "Could not umount $mountpoint to run fsck"
-  else
-    $nice $fsck -v -y $partition >> $log
-    mount $mountpoint
-  fi
-fi
-
-# restart services
-
-if [ ! -z "$service" ]; then
-  for daemon in $service; do
-    info "Starting service $daemon..."
-    $initscripts/$daemon start
-  done
-fi
-
-# removes the lockfile
-
-if [ ! -z "$lockfile" ]; then
-  $rm $lockfile || warning "Could not remove lockfile $lockfile"
-fi
-
-echo "Finnishing backup at `date`" >> $log
-